Coke spilled on Satellite Pro A100 - black screen & flashing light


I have a Toshiba laptop Satellite Pro A100, and this morning my daughter spilled coke top.
It was not much and it only seems to be on the top of the screen (as the laptop was closed)

However it was a bit on the keyboard and when I opened it it seemed to be a crackling sound from speakers?
I turned off and unplugged the power outlet and it was built next to the radiator for the last 4 hours,
I tried it again now and it started, there were still crackling and then the screen went black, but the 'on' will Flash blue, the capslock flashes as are the other two on the keyboard.

Is it buggered or is there anything i can do to fix it?

Any help would be apprciated.



My laptop couldn't t start because my girlfriend accidentally spilled water on the keyboard.
The laptop turns off and I was not in a position of power upward again.
Whenever LED books went ON and after a few seconds the laptop stop again.

I thought that the motherboard was dead, but I tried to replace the memory modules first and bingo!
One of the modules has been defective.

I replaced it and the laptop turned on properly.

Welcome them

Tags: Toshiba

Similar Questions

  • After logging on my Satellite Pro only black screen and the cursor are visible

    I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

    I do not prefer the product cause of my data recovery on this subject, any ideas?


    You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

    Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
    But wait; have you tried to connect the laptop to the external display?
    Check it!
    Maybe you could see something on the second screen.

    I think that this procedure could be useful to clarify what s wrong.
    To me this question looks like a small little dysfunction of the FL inverter.
    In this case the installation of the new operating system will help you not to solve this problem.

    But who knows the verification is necessary to find what could be wrong.

    Good luck and bye ;)

  • Satellite Pro A100 - blue screen keeps coming back

    I have a Satellite Pro A100 (psaase) and a blue screen appears some time it says image kernel memory and the only way out is to restart the laptop.
    How can I fix? Can someone tell me what's wrong with it and how to fix it?

    Thank you

    There are hundreds of causes BSOD. What is the BSOD STOP code?


  • Satellite Pro A200 - black screen with a blinking cursor


    I'm new to the forum and have a big problem.
    So, any help is welcome and appreciated.

    My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor.
    Also just as the screen goes black a beep can be heard which shows windows boot.

    I can access the toshiba Setup screen but not the installation of security mode.

    Kind regards


    Please go into the BIOS settings and check if the HARD drive is listed there.
    The blinking cursor is a typical sign of a malfunction of the HARD drive.
    Eventually the HARD drive is dead and you need to replace it and reinstall the operating system.

    Good luck

  • Re: Satellite Pro A200 - black screen after the BIOS screen

    I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

    My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
    I can access the toshiba Setup screen but not the installation of security mode.

    Kind regards


    You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

    If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

    Check this box!

  • Satellite Pro L40: black screen but faint image in background

    Satellite Pro L40 - 17 H (PSL4BE-00T005EN)


    I would appreciate your help with the following problem:

    SYMPTOMS: The screen is black, but I see that there is a faint image in background.
    I get a good picture in the external monitor.

    I suspect, _among others_, there may be a faulty * cover sensor / switch *, but I have been unable to locate him, although I have disassembled the unit.

    If anyone knows, please let me have the exact * location * where I should look for the switch.
    Thank you

    > I think, among other things, that there may be a faulty lid switch/sensor

    No, I do not think that its sensor problem.
    I guess that the FL inverter is faulty.

    The FL inverter controls the backlight of the LCD display module.
    Therefore, this part should be checked and if necessary, it must be replaced.

  • Satellite Pro U200-> black screen after startup


    It happens from time to time when I try to start my PLUA1E Satellite Pro U200-02802QS4, then I get a black screen even from the BIOS.
    What is wrong and how to fix this?

    BTW, I already have this BIOS version: P0044v370.exe installed.


    This happens from time to time?
    This means that you can not reproduce this problem?

    Hmm that's not easy to say what the issue might be.
    Maybe the BIOS update will help you at the moment you can find BIOS 3, 7 victory on the European driver Toshiba page.
    If you have a lower BIOS version installed, then I recommend an update.

    It is also possible that this problem is related to some of the material; motherboard, screen, etc.
    In this case the part should be replaced but first of all it of necessary to know what part is affected and I think that the technician of the ASP for this

    What do you think???

  • Satellite Pro C660 - black screen and a cursor flashing during startup

    When my laptop start, after it shows the press f2 or f12 and then from windows, it goes to a black screen with the cursor blink.

    The lights are on at the front, but there is no activity on the hard disk, such as the indicator light does not blink.

    Need help. Thank you.

    I think that your HARD drive is dead.
    You need to replace the HARD drive with a new 2.5 SATA HDD.
    Replace the HARD drive and install the OS by using Toshiba recovery disc.
    I hope you ve created one in the past

  • Satellite Pro L450D black screen and will not respond to any keys


    My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

    Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

    A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

    As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

    + Windows 7 +.
    + Recover Windows to Factory Settings [active EMS] +.

    So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

    I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

    I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

    Any help would be grateful.


    Have you tried the option of HARD drive recovery?

    If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
    Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

    I hope it will work!

  • Satellite Pro A100 - driver Nvidia GeForce 7600 Go blue screen problem

    Hi all

    I have a problem with my Toshiba laptop Satellite Pro A100 PSAASE.

    Description of the problem:
    During a game for half an hour the screen darkens and a second view later, I get a blue screen.
    After the reboot, that the solution of the problem of Windows Vista tells me that the problem is caused by the graphics driver Nvidia see dietails below:

    Problemereignisame: BlueScreen
    Betriebsystemversion: 6.0.6001.
    Gebietsschema-ID: 3079
    Files that help describe the problem:
    Mini101708 - 01.dmp
    SysData. XML
    More information about the problem:
    BCCode: 116
    BCP1: 87A8A3A0
    BCP2: 8C8109B0
    BCP3: 00000000
    BCP4: 00000002
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 768_1
    Serverinformationen: 1daf36bb-f6aa-446d-9ddf-545744789c19

    I tried to find a solution or a new driver for my graphics card, but I couldn't find any useful information. I really the lates driver for my graphics card according to Toshiba lateral support (driver version:, on the Nvidia homepage I also could not find a newer driver that I have.

    Details on my laptop:

    Modellname Satellite Pro A100
    Serial number 27069711Q
    BS-Microsoft Windows Vista Version? ¢ Home Premium 6.0.6001 Service Pack 1
    BIOS 6.00 version
    Processor Intel (r) Core (TM) 2 CPU T5500 @ 1.66 GHz
    2048MB RAM Arbeitsspeicher
    Festplattenkapazitat 120,580,372,480 [bytes] 112.299 [GB]
    Capacity of the freien Festplattenspeichers 27,078,627,328 [bytes] 25.219 [GB]
    Video NVIDIA GeForce Go 7600 Version =
    Bildschirmauflusung 1280 x 800 pixels
    Farbqualitat True Color (32 bit)
    Its Realtek High Definition Audio (with SRS) Version =
    Netzwerk Intel (r) PRO/Wireless 3945ABG Network Connection Version = MAC-address = 00:19:D2:5E:37:D2
    Intel(r) PRO/100 VE-Netzwerkverbindung Version = MAC-address = 00:A0:D1:6 B: F1:F5
    Modem TOSHIBA Software Modem Version =
    Internet Explorer 7.0.6001.18000
    IDE-Gerät TOSHIBA MK1237GSX ATA Device
    CARPET * a DVD-RAM UJ-850 s ATA Device Version = 1.10 FW
    YC3555P CIP693I SCSI CdRom Device FW-Version = 1.0

    I really would apreciate if someone can help me solve this issue.

    > During a game for half an hour, the screen darkens and a second view later, I get a blue screen.
    Well, my first thought is that this problem is related to the graphics driver.
    I mean it could be a software problem.
    But I know that a BSOD can also occur if the graphics card chip began to malfunction.
    In your case I m not sure what could cause this problem. But to play a game, that the GPU is running with a maximum yield and produce a lot of heat. If the temperature rises to a higher level the GPU can also cause a BSOD.

    Anyway, first of all, you must check if the graphics card driver update could solve this problem.
    Maybe you could use a driver from other websites but please note that this is ONLY possible at your peril!

  • S-video on Satellite Pro A100 problem

    Hi, I recently bought a new satellite pro a100 with XP pre-installed-one of my main reasons to choose this as the price was the built-in s-video connector so I can get my screen up on my tv. However, I have not yet got it working and you'd be grateful for all the assistance.

    It is connected to my TV via a s-video cable, connected to an s-video/SCART adapter to work. Nothing is display on the screen and in the ATI displays the setting, control panel is the only option that is imparted to me. The other 2, including television are grayed out.

    Maybe something needs to be configured, but I have not found information of any use yet.

    Thank you



    As far as I know avoid any problems if you want to connect the laptop to the TV. After connecting, please use the FN + F5 key combination and get on TV.

    It can happen that picture will be black and white, but it is because S-video in on television port is not enabled.

  • Satellite Pro A100 request BIOS password which was never put


    Have had my Satellite Pro A100 for almost 2 years and that all this time have never even heard of a password system, but all of a sudden, I turned on the laptop this morning and it does not load. I tried pressing F12 (can't remember why, it seemed the thing to do to read the instructions at the bottom of the screen), but nothing happened so I just turned off the power. Put on again, he asked the system password. (A black screen with a blue box, with the old text base BACK type fonts).

    I have no idea what it could be, I tried the word system and tried just pressing on enter without text in there but it says incorrect password. I removed the battery and left 10 hours but put it back in the machine there is no difference, it will not always go through this screen.

    I am the only user on this machine, have no idea what caused it. I am aware of security, have installed on complete McAfee AV and did not have anything odd happen at all. Didn't last changes made to the configuration, no new software etc. so I have no idea what prompted it.

    Can anyone help please?

    Thanks in advance

    This password seems to be a BIOS password, but I have no idea why this password is displayed if you have never defined it.
    Unfortunately, there is not a lot to see the BIOS password can be removed without the help of an ASP.

    Then, contact the service provider allowed in your country and request removal of the password.

    I also recommend updating the BIOS after the technician removed the password.

    Do you know how to find the ASP closest?

    Here is a site with all FSA worldwide:> support download &-> find an authorized service provider

    See you soon

  • Problems of browser on Satellite Pro A100

    I updated the BIOS on my Satellite Pro A100 and since I get the following message after about 30-40 minutes of navigation:

    "The connection was reset".

    The connection to the server was reset while the page is loading.

    * The site may be temporarily unavailable or too busy. Try again in a few

    * If you are unable to load any pages, check your computer's network

    * If your computer or network is protected by a firewall or proxy, make sure that
    that Firefox is permitted to access the Web. »

    I get a similar message using other browsers. Still, the only way I can get online is to restart my computer. Other computers in the House work perfectly at the same time, this message appears.

    Any suggestins/help will be greatly appreciated.


    Who knows what happened to your computer? Have you tried to restore the firewall settings or factory settings? Otherwise, there can be question of updating the Bios, if you downgrade BIOS, it can bring the system with white screen crash.

  • Satellite Pro A100-080 does not start - stays dark after 3 beeps

    After a week off, the Toshiba Satellite Pro A100-080 (PSAASE-00G004GR, 4 GB RAM) of my kids start not anymore.
    When turn on/off the system, he * will beep 3 times * (one long, two short beeps), the HDisk light flashes 'blue' and then nothing more. A/c and battery power LED are 'blue', which seem to be OK status.
    No other useful help, as the screen remains dark.

    We had upgraded to 4 GB MEM (Kingston) a year ago and I already tried the old used 1 GB (included with purchase) or the replacement of 2 x 1 GB since December 2007, but equal status with these modules. This is not
    a defect of memory.

    I hope that this is not the motherboard, probably only the NVIDIA GeForce Go 7600 graphics included adapter?
    Does anyone have an idea what could be the problem?

    Thx for a short help.


    Generally this type of beep codes are hardware related or with other words, hardware is defective. So I think it's a hardware problem and an ASP must check your laptop computer to identify the cause of this.

    On the Toshiba site, you will find a list of aspic: > support & downloads > find an authorized service provider

  • Touchpad is not what I want - Satellite Pro A100


    I have a PSAACE-00V002EN Satellite Pro A100.

    I seem to have a problem with the touchpad - he decides for itself I want to minimize a window when I click in the page (web browsers, etc.). I could try to use the scroll bar or click a link but is not what I want it - it will minimize or expand to full screen. Sometimes it doesn't let me select anything or put my cursor in a text entry box.

    I installed the latest synaptics drivers but this does not at all affect.

    Kind regards



    The same problem occurs when you use the external USB mouse?
    Did you install the 3rd party applications that could have a bad influence on the work of touchpad?
    You know, it s interesting to know if this happens on the operating system that was fresh installed on the laptop

Maybe you are looking for

  • Old UID and PWD always on

    Hello. I connected my new user id and password, but when I open the app store, it shows my old user id and the password so related. I checked all the settings, but they saved my new user. How should I do? I can't update my applications.

  • BIOS startup parameter to correct (or unusual) network card?

    Presario F572US Windows 7 64 bit _______________ BIOS / Boot Options / internal network Boot card = ' disabled'. Should it be? BIOS / Boot Options / Boot Order /! Network adapter is 'Enabled'. With the message: "starting capability will be disabled i

  • loss of services

    all svchost stops, causing a lot of problems IE cannot save cannot download unable to upgrade can't load rebooting fixes the flaw and for a short period of thie can get the service error stopped again and loses all the svchost.

  • svhost.exe slows down the computer.

    Original title: slow computer Thank you it sped up a little. the problem I have now is svhost.exe is, in 10 minutes or less, originally a very slow response time on the line. switch from 1 page to another. a lot of delay. I bring up the Task Manager

  • I can't get my computer even go to the Facebook page... can open all other websites very well? Help!