Color calibration has a clean mind (on battery)

If the system has been a stack in any point of the session, color calibration seems to get dirty on the rise according to what is on the screen. If dark colours dominate the screen, the colors go slowly (but apparently) all weird. When it is contained is mainly white on the screen, he returns to normal.

I've reviewed some power management settings, and none of them seem to relate to this.

The system is W520 with FHD screen, Intel 8.15.10.2538 drivers, Nvidia 332.21, Windows 7 drivers.

This does not work on Ubuntu, or on an external monitor.

http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T410-screen-brightness-dims-washes-out-on-b...

Should be on this issue. Uncheck the "display energy saving technology."

Tags: ThinkPad Notebooks

Similar Questions

  • iPad keyboard has a clean mind.

    Quite suddenly, when I start typing, random letters will enter into the text field. If I tap gently on a single letter, sometimes up to seven or eight letters will appear randomly. Using the BACKSPACE key often results in more random letters that appear in the text fields. It started when I updated that we could go to the most recent iOS. Any suggestions?

    Hi Kenny,

    I understand that you see erratic behavior of the keyboard on your iPad. In such a situation, it can often help to force close all open applications and restart the device.

    Force an app to close the iOS
    http://support.Apple.com/en-us/HT5137

    Turn your device iOS market (reboot), then reset
    http://support.Apple.com/en-us/HT1430

    Kind regards!

  • HP psc 750 color, which has been filled, cartridge will not print.

    HP psc 750 color, which has been filled, cartridge will not print.  Using Windows Vista.  Get the message "check color cartridge".  Only change to the system was making filled the color cartridge.

    Performing the procedure online electrical contacts cleaning service twice without a bit of luck.

    Looking for suggestions as to how to solve.

    Hello. Since the hard reset is not; I would try a new cartridge at this point. The hard reset is one of the most powerful tools when it comes to correcting hardware related problems and error messages.

  • Color calibration - not able to change to a bright yellow yellow

    Separated from this thread.

    I use Windows 8.1 on a gaming laptop Lenovo.

    The yellow color is has a horrible greenish.  I went through the color calibration, but I wasn't able to change a bright yellow yolks.  Can someone help me?

    Hello

    Thanks for posting in the Microsoft Community.

    This might have caused due to display drivers corrupted sometimes when screen updates the latest drivers, you may experience these symptoms or customizing the desktop software could also create this problem

    1. did you do with the last changes made to the computer before this problem?

    I suggest you try the following steps.

    a. press the Windows key + R.
    b. type ""Control " and press OK."
    c. click on color management.
    d. click Advanced.
    f. click on Calibrate.
    g. click Next to continue.

    Additional information:

    Please visit the manufacturer of computer for the latest updates display drivers.

    Also, try the procedure described in the following Microsoft Help article.

    http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

    We look forward to you a response. Please do not hesitate to contact us if you have other questions related to Windows.

  • Why to start Firefox message appears that "the color palette has been changed to Windows 7 Basic"?

    I am running Windows 7. When Firefox starts the message that arrives the color scheme has been changed to Windows 7 Basic. The message then continues to talk about the incompatible program. When I close Firefox to the colors return to normal. It has just begun to happen.

    Check that you are not running Firefox in compatibility, or with a reduced screen resolution mode.

    You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".

    Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • How can I return my screen to its default values after you run the Windows 7 color calibration?

    I decided to run the color calibration tool windows to try to optimize my monitor, but the quality came out worse than before. After trying several times and otherwise, to get a better picture I decided that I would just back to its default value. The problem is that I don't see an option for it. So, how can I reset my screen its initial values of before I tried calibration it?

    Thank you

    Using Windows 7 Pro 64-bit

    Windows (rstrui.exe) system restore would do it without data loss.

  • How can I reinstall PhotoShopCS3 and HD has been cleaned?

    How can I reinstall PhotoShopCS3 after that HD has been cleaned?

    Thank you

    Hi Larryc23776909,

    You can download it from here https://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

    Find your key series here:https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

    Let us know if it works!

  • XPS 15 (L502X) poor color calibration

    It seems that the color of the screen is bluish compared to any conventional screen.

    I tried calibration with spyder and all kinds of tools to color calibration but it always does'nt look right. How can I get a color that is 'normal '?

    Help! =)

    Thank you!

    Same problem here, the screen 1366 * 768 is completely useless. I totally regret buying this laptop.

    I tried lowering the settings of gamma in windows and games, which helps a little, but Hungarian is not going to be something close to perfection...

    I wonder if it is possible to interact with a screen 1600 * 900?

  • My Adobe Flash CS6 color picker has WEIRD colors. I use Mac Mini OSX 10.8.1. Is there a solution?

    hah.jpg

    My Adobe Flash CS6 color picker has WEIRD colors. I use Mac Mini OSX 10.8.1. Is there a solution?

    I click on the color picker and where I saw the normal color #0000ff blue on my windows computer, this version of mac mountain lion shows a color purple-ish. Strangely, if I enter the # hex in the color picker and use it as a filler, the correct color appears on the scene, but when I use the pipette on that color, it shows as purple color again on the toolbar.

    I saw something similar to this happen when you use adobe photoshop. However, the usual solution is just to do the color management profile to monitor RGB. The only drawback with Flash is there is no preference to set. The palette of colors in Adobe Photoshop displays as it should with correct blue.

    I should also mention that I use a Samsung 941bw monitor with my mac mini, which could also be part of the problem.

    I thought I would make this post anyway, just in case it's the OS & Adobe Flash CS6 and not the monitor.

    I've included a screenshot over which shows that I chose the color purple and then did a form of a rectangle on the stage and it comes out blue.

    Thanks for your response (s)

    -Line

    You can try to change the display settings of your monitor in Adobe RGB color (1998).

    System Preferences > displays > color and see if that helps.

    Thank you

  • Next step in the color calibration

    Hello:

    I now have a monitor color calibration that comes close to matching this only outputs of my printer, but I want to bring closer you.  If I understand the process, basically what I now want to do is make slight adjustments so that what is on my screen corresponds to what comes out of the printer.  I find that the printer produces images slightly more dark that appear on the screen.  I guess the first thing I do is to recalibrate the screen to match the printer (profile ICC of Ilford), which would mean a reduction in brightness.  Right now I'm at 80cd.  Should what kind of steps I use in these settings?  In other words, I'm dealing with the target as the printer ICC profile and trying to match the target screen.  Is this the right approach?

    Second, what differences White Point setting (6500K) and contrast (286:1) will be in term to better align the screen to the printer?  And in what direction.

    As you can tell, I'm new to the color calibration.

    Thank you

    Jack Siegel

    A Shirley would surely be a woman named... I jest, just not too well this morning

    But it would be an example of a photo you know is properly color managed if it prints directly on your game to the top.  Have next new images to be printed must be a good visual guide to this process; only one check more along the way.

  • Y40 - 80 randomly turn off. The battery calibration has not fixed the problem of battery meter.

    Hello

    I've had this Y40-80 during about 9 months and it has recently been acting strangely. The laptop will stop randomly. I thought that it was a sign, I had to calibrate the battery but after I had calibrated the battery, the battery meter percentage remained at 100% for a good 2 hours until it starts to decrease.

    Now, I tried to recalibrate the battery for 5 times using the howtogeek, OneKey and the discharge of the BIOS. I did a fresh install of Windows to get rid of all the software Lenovo that might have caused the problem, but that did nothing.

    I also uninstalled the Windows ACPI and Lenovo ACPI, which does not solve everything.

    This issue makes the computer laptop underclock the processor environ.48 Ghz, which makes the computer almost unusable.

    Someone have an idea on how to solve this problem, or is the battery dead?

    Comment to Moderator: Bumping more frequently than 3 days unjustly pushes down the discussions of other members. Bumping message (s) deleted.

    In response to customer relationships of unexpected behavior portable Y40 - 70 and Y40-80 meter battery, Lenovo has determined that the battery meter software is working as expected. The unusual calibre results being reported are the reflection of the battery reaches the end of life.

    Lenovo has launched a CUTTING-EDGE Service to help customers get the battery replacement under warranty, or if more warranty, find a spare from suppliers approved by Lenovo battery. The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-I0023

    The numbers for Y40-70/80 batteries are:

    Y40 SP / A L13M4P01 7.4V48Wh 4cell IBE (Y40-70/Y40-80) 121500248

    Y40 LG L13L4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500249 replace the 121500251 part

    Y40 CP/C L13C4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500259 replaced by 121500251 of the part

    To determine what battery supplied with your computer laptop Y40, instructions to remove the lower cover can be found in the manual of Maintenance of equipment pdf here. An alternative to opening your system (which do not cancel warranty) is to find batteries using the product/model number located on the bottom cover.

    Thank you

  • Color calibration settings reset after restarting the computer

    Hello!
    I had a really hard time with my monitor calibration.
    I will try to describe my problem as simple as possible. I hope that someone will find a solution to this because I just couldn't.

    SYSTEM:
    ASUS N750JV, Intel Core i7, NVIDIA GeForce GT 750 M + Intel HD Graphics 4600 and, of course, Windows 8.

    PROBLEM:
    "Calibrate display" settings change/reset back from each time after restarting the laptop, shut down or put to sleep.

    DESCRIPTION OF THE PROBLEM
    I just can't calibrate my screen. Everything I do just does not work.
    Calibrating monitor in Windows 8 works very well only during the time when I actually do
    But if I restart, stop, or put my laptop to sleep just goes back to normal.

    For example, as a first step, the screen of Loggin on Windows 8 when I start seems calibrated.
    but when I connect I wait 2 seconds or two and all my settings are changed in return.
    I have to recalibrate the screen again and again once and again and again...

    Swear to God that I tried all possible solutions to solve my problem and none of them worked.
    I have read a lot of forums, and I can't find the solution that actually works.
    I did the solution 'Safe mode' , the 'clean boot' solution, in 'color management', I changed the settings (in a way that people who said it should work).
    I've updated all my drivers (my system than the GeForce GT 750 M is up to date). I installed all available updates for Windows 8 (when I check updates, the system tells me there aren't everything and my system is also up-to-date).

    I guess there could be a problem with my graphics card. I know that everyone has had problems these last time with the new update for GeForce, but like I said before, if I have confidence in my laptop then my graphics card is up-to-date.

    It really bothers me. It's annoying and I'm frustrated by that. The worst is that I can't find a solution to this, so I'm really asking for help.
    Thank you!

    Original title: calibration unsolved display problem - Windows 8

    Adeline B, thank you very much for your answer.
    I'm sorry that I have not responded in such a long delay.

    Well, my problem has been resolved. I downloaded my GeForce graphics driver was last updated.
    Now everything works fine.

    • I know that this problem can be irritating. If anyone has the same issue so I recommend you (like everyone else) download of the updated driver for your graphics card.
    • If this does not work, try to calibrate your system using programs/software installed on your computer by your manufacturer. In my case it was splendid ASUS utility. I also used Intel® HD Graphics Control Panel.
    • Another thing is you may think that your system does not calibrate when it actually... made. So what you can do, it's just waiting for the start until your system is finally charge up. In my case, Windows 8 something takes about 10 to 12 seconds, until what it changes all the settings of ' my settings'.»» Then first Windows 8 loads up to original settings (and this is why you find that your screen is not calibrated) but then it loads the calibration settings you make before you restart and all is well.

    I know this sounds so easy is probably not solve anything, but when I had this problem with the calibration I was so irritated by it I wasn't noticing the changes! I'd just instantly to the desktop or control panel configuration, or web and try to solve the problem, without waiting for my system completely load all settings. But... If the wait does not then consult my previous statements.

  • 1525 laser jet color calibration

    I have a 1525 color laser jet that has 2 problems. One is a very pale yellow stripe on the right side of the page.  I can live with that, but it would be nice to get rid of him.

    The big problem is that blue color for printing is not properly calibrated, and there is a shift to what makes it fuzzy.  I tried to 'calibrate' the printer several times, and it makes no difference.  He got only 40K pages printed on it overall, is hardly old.  What should I do to solve the problem of calibration? As far as I can tell, I have all the software/firmware updates.

    Hi GC0110,

    Sorry for the late reply, I was not notified by e-mail. I was looking for all messages unanswered and came across yours.

    I suggest to call our technical support at the 800-474-6836 and inquire about a toner replacement yellow and cyan. Who will rule on the toner to see if it is a hardware problem. When you call in, let them know that you call on a guarantee in prop. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Please let me know the results.

    Thank you.

  • Custom color calibration lost with UAC, lock, sleep, start cold

    I own a Spyder2Pro color correction device.  I used the camera for years on several systems.  I have a desktop 64-bit Win7 Ultimate that I used the calibrator on without any problem.  When I calibrate my Dell Latitiude E5410 colour becomes bluish and nasty with the accurate hot color display, I need.  Any time UAC appears my color correction back to the nasty original (very noticeable difference).  Any time I lock the computer and back he did the same thing.  I get the result even if it goes to sleep or I do a cold start.  I contacted color data and they have no problems reported with windows 7 on the device.  Thoughts?  Is dell puts some kind of color management in the laptop that replaces the windows control?  Thinking I could do a clean install this weekend to give a test drive.

    Hi Rick Mead,

    Try the methods below:

    Method 1:

    Start your computer in a clean boot and check if the problem still persists. Link below will help you to start the computer in clean boot: http://support.microsoft.com/kb/929135

    If the problem does not persist, you can continue with step 2 from the link above.

    Make sure that you reset the computer in normal mode in step 7.

    Method 2:

    Check the color management setting, you can check the link below: management of color settings: frequently asked questions:http://windows.microsoft.com/en-IN/windows-vista/Color-management-settings-frequently-asked-questions

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • U2413 - factory Color Calibration and ICC profiles

    Hi, I just bought a U2413. I need for photography. There is nothing on profiles ICC U2413 DELL that was installed with the software in the documentation. And please note that I have not (yet!) a calibrator. I need to configure the best without calibrator... using the factory calibration.

    I hope you can make it clear, to me, how it works.

    The monitor has different MODES BUILT-IN, such as:
    -Color space sRGB
    -Color space ARGB
    -Standard
    -Game, etc.

    Which mode is the one that has been calibrated at the factory?
    What mode should I use in order to have the results of color?
    I see that there is no DELL U2413 color profile, D6500, which is associated with the monitor (I can see it in the control panel). I think it is good to have this setting. Can you please confirm?

    Do I set up the U2313 DELL ICC profile also to programs like Canon Digital Photo Professional, or as long as it is in Windows, it is not necessary? [Item 3 of this screenshot]. I see that if I put profile DELL in Canon DPP the colors of the photos appear much colder.

    Thank you

    If you do not have access to an i1DisplayPro/Color munki display a yo do not have the possibility to calibrate (not even in GPU with the munki:)

    factory calibrated
    -sRGB: 50 50 brightness contrast. You can use standard sRGB.icm, once lower you it up to 120cd/m (20-25% brightness) you will lose the white point calibration.

    -AdobeRGB: contrast 50 50 brightness. You can use standard AdobeRGB1998.icm (complatible or ones like Clay1998.icm), once lower you it up to 120cd/m (20-25% brightness) you will lose the white point calibration but less than sRGB. For color management programs and without perhaps a colorimeter its your safest choice, do not forget to assign and activate an Adobe1998.icm/Clay1998.icm in Control Panel of Windows to your monitor while you're in this preset OSDdevice.

    The other preset OSD are not calibrated at the factory.

    -standard is delivered with the native range (as described in U2413.icm of pilots) and native white (whie 6700-7000K with a strong green tint)

    -Custom is delivered with the native range (as described in U2413.icm of pilots) and native white (whie 6700-7000K with a strong green tint), but you have access to the parameters of "custom colors". 20-25% brightness, contrast 50%, and R = 100, G = 91 = 97 peut give you near D65 white and 2.26 "grow" gamma (cose to 2.2 or sRGB but I guess it comes with a ramp to a same gray except calibrated). Try these setings and activate U2413.icm in this preset custom of the OSD.

    And get an i1DisplayPro, you really need.

    Canon DPP regarding:

    2 refers to the "default" image profile
    3 to view the profile (so the DPP can distort the RGB values in the image to represent this color in what that is the range to your screen). Once you set a dile icm as 'default' in the control panel-> color management-> your device it shoud check the option "use operating system settings" (I think, I don't have any owm a canon camera)
    5 a your printer profile, a profile for each combination of inkjet paper
    6. keep this, perceptual is generally more 'alive' than the actual image
    7 I think takes forever with Canon programs (but I am not a canon camera, so I have not tried their meaning), keep the same as 6

Maybe you are looking for