color issues - please help

Similar Questions

• Small blue screen issue Please Help

  Hello

  I turned on my pc this morning an appeard blue screen with something like the following below.

  I've never seen before read something like - if seen first computer reboot /hardware - then went to connect (before I pressed F9 - diagnostic tool

  to see if something was wrong--all passed) then watch Windows error recovery screen I pressed "Start windows normally" because I don't know what the other 3 meant that I'm not this technique.

  Logged in - Message appeared "Windows has recorved against an unexpected closed, a windows problem caused to stop working correctly". I looked at the event log, but I have no idea what I want to really, I vacuum the back on pc - the dust ect... Please help because I do not want to see it again / please if anyone is nice enough help me please that they have no basis.

  I'm running Windows Vista Home premium service pack 2

  I look forward to your reply.

  BS

  I understand.  The files are newspapers of accidents and have nothing to do with your operation systems.  You can do what suggests the wiki for when access is denied without too much worry about a problem

  Try this

  If you get "access denied" try this method

  First, create a folder on the desktop and call Minidump

  Open the C:\Windows\Minidump folder and do the following:

  Home > select all > Home > copy to > choose location > Minidumps > copy

  Then right click on the Minidump file > Send to > compressed (zipped) folder.

  Then download the compressed (zipped) folder newly created on Onedrive and provide a link here.

• VIP - ANALYZE Configuration Issues - Please help!

  Hello world
  
  First of all I ask you guys to Please HELP SOLVE ME THIS PROBLEM – thank you!
  
  I am installing grid Infrastructure Oracle 11 g 2 11.0.2.0.3 on Oracle Solaris 11.11 x 86 64 bit installed using Live Media on Oracle VirtualBox 4.2.6.
  
  After you have configured the nodes in the cluster, I ran the cluster verification utility that came out with 100% success.
  
  However, during root.sh run, I get the following error:
  
  /U01/app/11.2.0/grid/root.sh
  --------------------------------------------------
  CRS-4266: Vote or managed to replace the files
  # File group universal name Id disk STATE file
  -- ----- ----------------- --------- ---------
  1. online 4a3543261bc34fc9bf6e41b5d7fa04c8 (/ dev/rdsk/c8t2d0s1) [OCR]
  Located at 1 vote (s) disk.
  CRS-2672: attempt to start 'ora.asm' on 'sol1.
  CRS-2676: beginning of "ora.asm", the successful "sol1"
  CRS-2672: attempt to start ' ora. OCR.dg' on 'sol1.
  CRS-2676: beginning with ' ora. OCR.dg' on 'sol1' successful
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n... failed
  FirstNode configuration failed on line /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm 9196.
  /U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  I have re-run this command to see the real errors
  
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n
  ------------------------------------------------------------------------------------
  RPRC-1013: failed to start of ora.net1.network resources
  RPRC-1064: failed to start of ora.net1.network on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  RPRC-1079: failed to start of ora.sol1.vip resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to place the "ora.sol1.vip" resource on which will achieve its investment policy
  RPRC-1013: failed to start of ora.ons resources
  RPRC-1064: failed to start of ora.ons on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  
  
  I ran the following commands to know the State of SAN and SCAN-headphones
  
  srvctl status scan
  --------------------------------
  VIP scan1 SCAN is enabled
  Scan1 VIP SCAN does not work
  VIP SCAN scan2 is enabled
  Scan2 VIP SCAN does not work
  SCAN VIP Scan3 is enabled
  Scan3 VIP SCAN does not work
  
  srvctl status scan_listener
  --------------------------------------------
  LISTENER_SCAN1 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan1 is not running
  LISTENER_SCAN2 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan2 is not running
  LISTENER_SCAN3 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan3 is not running
  
  srvctl config scan_listener
  ---------------------------------------------
  LISTENER_SCAN1 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN2 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN3 listener SCAN exists. Port: TCP:1521
  
  
  Here is the content of my/etc/hosts and /etc/resolv.conf files
  
  cat/etc/hosts
  -----------------------------
  # Public
  192.168.56.101 sol1.localdomain loghost sol1
  192.168.56.102 sol2.localdomain sol2
  192.168.56.160 solfiler solfiler.localdomain
  
  # VIP
  192.168.56.111 sol1-vip sol1 - vip.localdomain
  192.168.56.112 sol2-vip sol2 - vip.localdomain
  
  # Private interconnection
  192.168.0.101 sol1-priv sol1 - priv.localdomain
  192.168.0.102 sol2-priv sol2 - priv.localdomain
  
  # Scan
  #192.168.56.201 ground-sweeping ground - scan.localdomain
  #192.168.56.202 ground-sweeping ground - scan.localdomain
  #192.168.56.203 ground-sweeping ground - scan.localdomain
  
  
  cat /etc/resolv.conf
  ------------------------------------
  #
  # AUTOMATICALLY generatedFROM_SMF_V1_
  #
  # ATTENTION: THIS FILE GENERATED FROM SMF DATA.
  # DO NOT EDIT THIS FILE. CHANGES WILL BE LOST.
  # See /etc/resolv.conf (4) for more details.
  
  Search localdomain
  nameserver 192.168.56.101
  nameserver 192.168.56.102
  nameserver 192.168.1.1
  
  
  Here are the details of the network
  
  dladm show-phys
  ----------------------------------
  MEDIA SPEED DUPLEX LINK
  Net1 Ethernet up to 1000 complete e1000g1
  NET2 Ethernet up to 1000 full e1000g2
  Net0 Ethernet up to 1000 complete e1000g0
  
  ipadm show-addr
  ---------------------------------
  ADDROBJ TYPE STATE ADDR
  127.0.0.1/8 ok static lo0/v4
  Net0/v4 dhcp ok 10.0.2.15/24
  Net1/addr static 192.168.56.101/24 ok
  NET2/addr static 192.168.0.101/24 ok
  OK static lo0/v6: 1/128
  Net0/v6 addrconf ok fe80::a00:27ff:fe5f:f484 / 10
  
  
  I did the nslookup on my name SCAN
  
  Nslookup ground-scan
  ----------------------------------
  Name: sol - scan.localdomain
  Address: 192.168.56.202
  Name: sol - scan.localdomain
  Address: 192.168.56.203
  Name: sol - scan.localdomain
  Address: 192.168.56.201
  
  I ran the following commands to see if the installation process correctly reads my SCANNING configuration
  
  srvctl stop scan_listener
  srvctl stop scan
  
  srvctl config scan
  -----------------------------
  SCAN name: ground-scan, network: 1/192.168.56.0/255.255.255.0/net1
  SCAN VIP name: scan1, IP: /sol-scan/192.168.56.203
  SCAN VIP name: scan2, IP: /sol-scan/192.168.56.201
  SCAN VIP name: scan3, IP: /sol-scan/192.168.56.202
  
  So it's good reading ANALYSIS information there is so no problem
  
  I tried to start listeners to SWEEP and ended up with the same mistakes
  
  srvctl start scan_listener
  ------------------------------------------
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN1. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN1. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN2. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN2. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN3. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN3. LSNR' on which would meet its investment policy
  
  If it helps, I use automatic network default Solaris 11.11 management but I changed IP addresses of net1 and net2 manually to meet my network
  Requirements for the clusterware.
  
  I followed all the steps of the system requirements for installing under solaris 11.
  
  After checking everything I could have as detailed above, I'm now helpless as to where things go wrong
  
  What is automatic 11.11 Solaris network management that does not allow the creation of addresses IP SCAN VIP?
  
  Once again I ASK YOU GUYS to Please HELP me THIS PROBLEM FIX.
  
  Concerning
  Terry.

  Hello

  the problem is the host name of the server is resolved is on the 10.X.X.X network.
  For example, the cluster requires the public network to be on this network. And the error you get, because this network is on DHCP.

  If you have the following options that you can try:
  a.) change the server to have the host name to resolve to the 192.X network
  (b) change the order of the network adapters
  (c.) remove the network 10.X.X.X at the moment of installation

  Concerning
  Sebastian

• !!! Very Urgent - Production Issue - please help

  Hello IDMers,
  
  We are facing a problem in production, we have updated the AD process form yesterday. Two fields Type Employee and Employee ID field as a process user AD had up-to-date for all existing users. These two fields are now empty for all users.
  
  But these fields have the appropriate value in the User Table of Xellerate for all users. Now I need to some how fill in the Type of employee and employee ID for all employees of the User Table to your AD process.
  for example: consider an employee called Pierre - type emp is full-time and Emp ID is 100; i'm in the IOM user Table, but this user is configured with AD and now I have to update his AD process form so that these two fields are filled. I need to do it for all users of the IOM. I suppose pre-population adapter triggers only when the form is created for the first time. Please suggest me some ideas.
  Is there an easy way to do this task?
  What is my way of thinking, I need to have a scheduled task that basically loop through all users and updates of their field and the employee id as the user Xellerate Table AD user.
  
  Please help me with this because it is very important.
  Thanks once again everyone else for your support all this while.
  
  Kind regards
  ~ THE VSN

  You want to send this info to AD?

  If Yes

  CHS task to create and update the form of process by using APIs.

  If not

  Solution 1:

  Use DB query to be updated directly as a database if you have access (never Recommneded) but the task of 1 minute to do this.

  Solution 2:

  Create CHS task to run the DB query.

  Solution 3:

  Check the VSH utility that comes with IOM.

• Small desktop Inspiron computer (3647) Driver Issues Please Help

  I am new to this forum n im really have a problem, I downloaded the drivers directly from the dell Web site... but there are some drivers that do not install, I looked in my device manager, it is highlighted yellow triangle three...    1 generic bluetooth adapter...  2. network controller. 3 pci simple communication controller but I can not even free wifi... could someone please help solve this problem?     Thank you

  Hi jasonm6565,

  I suggest you try to download the driver for the card wireless to another browser.

  Also, answer us with the snapshot of the Device Manager with the WAN adapter.

• How the color of a police of 2 different colors? Please help me :)

  How can we the font color with 2 colors in windows applications?
  I know that the windows fonts are colored in applications (such as messenger, MS word)... because the police are (colorless) originally... my question: is it possible to the color of the font with 2 different colors? as the upper part of the letter A to be yellow and the Red lower part? or as describing the letter with a different color?
  and by the way, I don't want not something does not like using the WordArt in MS word... who uses images... I want a software to color the fonts we use in messenger/wordpad / any application under windows (customizable color pixel by pixel)... because the demand police colors... If anyone can help me with that? Thank you very much

  and please tell me if there is any software that can do that :)

  As I said, I doubt that there is no 'coloring software police' who will do what you want. However, contact one of the creators of fonts and see what they have to say. Certainly a person of professional fonts Foundry will know if it is possible to do what you want and if so, how. MS - MVP - Elephant Boy computers - don't panic!

• Unable to connect to the internet/driver issues please help :(

  Hello. I installed a new copy of Windows 7 Ultimate 64 bit on my computer. Everything works well except for two pilot numbers. I also can't connect to internet at all no more. I guess it's because of one of the pilots. The two drivers that I have problems with the network controller driver is a unknown device in the PCI Bus. Nothing is connected to this Bus by the way. It just says: unknown device. My laptop is a HP Pavilion G6 2123us. I tried all the drivers for this laptop on this site and none have seemed to solve the problem. I looked really hard now and it's pretty frustrating

  More information that I can give is the ID of equipment for both pilots:

  Driver network controller hardware ID:

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
  PCI\VEN_168C & DEV_0032 & CC_028000
  PCI\VEN_168C & DEV_0032 & CC_0280

  Unknown Device hardware ID:

  ACPI\HPQ0004
  * HPQ0004

  I wasn't sure what hardware IDs to give, so I just posted all the. I hope someone can help me please. I greatly appreciate it.

  Hello:

  You need this driver...

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

  and this driver...

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-105047-1&CC=US&DLC=en&LC=en&os=4063&Product=5273777&sw_lang=

  Paul

• PANTONE color Mismatch - Please Help!

  Hi all

  I'm sure this is an old topic, but I'm pulling out my hair at this time to try to understand why a color marked as Pantone Orange 021 C poster completely differently in the two files.

  Basically, I was sent a swatch source file to work from (in the form of a PDF document with coloured boxes and their Pantone code written on them), but when I copy and paste a color into my new file or select it from the swatches Pantone, color is completely different and in-depth has different LAB and CMYK colors to the original file.

  I see that my new file displays the color as a color of paper, in which case the source PDF displays colors in CMYK... that means that my source file was made using the non-Pantone book more color?

  If so, could someone please suggest how I could copy and paste these colors in my new files using the original CMYK values? Essentially, it is important that I keep the colors in my new compatible with the source PDF file - tips on how to do this would be greatly appreciated...

  P.S. I use Illustrator CC and made sure that I work in the same evidence in place.

  Thank you very much

  

  Giles

  Yes, your source file was made with old books of color Pantone containing simulation CMYK values.

  Since the CS6 these CMYK values are no longer present in the Pantone libraries +, but Lab values are used to calculate the closest possible CMYK simulation based on your color settings.

  Lab values for this color have not changed.

  If you want to keep the old values CMYK, double click on the nuance in the swatches Panel in your old document and choose: Type color > color

• Photon: Ringtone issue Please HELP!

  My father has a motorcycle Photon 4 g the next day it came out and everything was going well until the day one of his contacts called and the default ringtone is out rather than custom it they assign. Made all to remove the battery for a while, the factory reset and also it took to Sprint and they checked it and also a factory reset and none of these things worked, so to the they gave him a new, but the problem persists. Someone now, any difficulty or if Motorola has an update on how to fix it? Just in case, everything is stock. Any help would be grateful.

  
  

• Country of Smartphones blackBerry and other issue.please help

  Hi my name is Khan
  I use a Blackberry Bold9000

  I'm having a lot of problems in my phone

  (1) I can't use appworld because my country is not supported. Why and how I do supported

  (2) it's always when I download app Twitter + facebook app. I get an error massage. Service plan is not supported. Contact your service provider.
  My ISP is "Mobily"... I contacted them they said melon time, we provide a complete service plan + I checked all my sound all set to update versions

  Please, we are the most people who use black berries in the Middle East

  and you put your desktop in the Middle East to the Lebanon

  We need to be heard, I really love RIM, but I need recognition.

  Hello and welcome to the Forums!

  If you're hoping that RIM will see your message - these forums are a chain of support to users, not a conduct of user-to-RIM. Therefore, it is unlikely they will see what you wrote. However, if you have specific and constructive ideas for them, I heard they accept this by e-mail to [email protected].

  be_smile wrote:

  (1) I can't use appworld because my country is not supported. Why and how I do supported

  Understand that RIM has no unilateral control over the availability of AppWorld. On the contrary, a triad of entities must agree - RIM, wireless service provider, and Government. As the main entity to profit in this triad, I've always suspected that the RIM is not one that could hinder the process. So, what you can do, is put pressure on your company and/or your Government to allow the AppWorld in your country.

  In addition, you should know that AppWorld is simply a portal, vending apps developed mainly by others. Therefore, it is not your exclusive supply source - there are others that you can try (e.g., Handango, Handmark, BPlay, GetJAR and Mobihand). I found that there are very few applications that is exclusive to AppWorld. You can see the online catalogue and then look for other sources of supply, including quite often on the developer website.

  be_smile wrote:

  (2) it's always when I download app Twitter + facebook app. I get an error massage. Service plan is not supported. Contact your service provider.
  My ISP is "Mobily"... I contacted them they said melon time, we provide a complete service plan + I checked all my sound all set to update versions

  Your service provider is responsible for providing all services and support for you. No one else has no control. They need to solve this problem. You have the ultimate leverage - you pay for services they don't deliver. They have the ability (in fact, the responsibility) to escalate your case at RIM for extra support if necessary. You have no free method to request support from the RIM as the escalation of your provider.

  Good luck and let us know!

• Looking for the color box select color. Please help :/

  After double clicking on the layer that opens "Layer Style" - I don't have a box of color on this version I'm testing. Photoshop CC 2015.

  Where is the option to color box to enter a specific color for this layer style?

  Thank you kindly

  Oh, nevermind... He opened the color option when I clicked the plus sign next to the style I chose

• Not your usual recycle bin issue: Please help

  Hello

  After completing installation S10 - 3T the way I like it, I tried to remove some disk images large enough to the trash, as well as a few other files - about 12 concerts altogether.

  When I emptied the trash, I got a window saying that a file was too big for the architecture of files on this disc (or words to that effect).  I pressed OK, and I did not "delete items" window regular.  However, nothing happened.

  Files are moved from the trash, but my disc info showed no increase in free space.  The files are stll somewhere.

  I don't want to "restore" files - I want to just remove them permanently.  How can I follow the worms down?  I tried Disk Cleaner, but that has not kept the files.  Don't tell me I have to buy third party software to do this?

  I would appreciate any help on this mystery to help me get back the 12 concerts more or less space.

  Thanks in advance.

  Ken

  Hello...

  Try CCLeaner 2.30.1130 Version

  cordially KalvinKlein

• With kernel panic issues please help reading log files

  Whenever I plug a peripheral usb Arduino my mac crashes. Here is the log. I can't understand.

  _________________________

  Anonymous UUID: F337CFF1-4204-DF6D-2BD0-B6FDF3953966

  Mon 3 Oct 11:30:17 2016

  Panic report *.

  panic (the appellant 2 cpu 0xffffff801554186b): 'item 0xffffff9202993dee of vm area objects being released taken wrongly zone kalloc.16\n"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3789.1.32/osfmk/kern /zalloc.c:2664 '.

  Backtrace (2 CPU), Frame: Return address

  0xffffff9202823ba0: 0xffffff80154f748c

  0xffffff9202823c20: 0xffffff801554186b

  0xffffff9202823d00: 0xffffff8015a86fe6

  0xffffff9202823d20: 0xffffff7f9643d00a

  0xffffff9202823d70: 0xffffff7f9639600a

  0xffffff9202823d90: 0xffffff7f9639bf9d

  0xffffff9202823e10: 0xffffff8015ac00ba

  0xffffff9202823e80: 0xffffff7f9639b8dd

  0xffffff9202823ed0: 0xffffff7f963a07e1

  0xffffff9202823f10: 0xffffff7f963a053f

  0xffffff9202823f30: 0xffffff8015abd621

  0xffffff9202823f80: 0xffffff8015abcc06

  0xffffff9202823fb0: 0xffffff80154a6af7

  Extensions of core in backtrace:

  com.apple.iokit.IOUSBHostFamily (1.1) [6A671CD8-5527-3A10-8675-1421D158D7A7] @ ffff7f96365000-> 0xffffff7f963ccfff 0xff

  dependency: com.apple.driver.AppleBusPowerController (1.0) [DB526B45 - 1 A 45 - 3A 81 - A0C1-57F826CAD EDF]@0xffffff7f96358000]

  com.apple.iokit.IOUSBFamily (900.4.1) [8F6207EC-608D-373A-B35E-E6578202F58D] @ ffff7f96409000-> 0xffffff7f964a1fff 0xff

  dependency: com.apple.iokit.IOPCIFamily (2.9) [731443D8-78D5-30C8-939A-1ED3E857CA22] @ 7f95d32000 0xffffff

  dependency: ffff7f96365000 @0xff com.apple.iokit.IOUSBHostFamily (1.1) [6A671CD8-5527-3A10-8675-1421D158D7A7]

  Corresponding to the current thread BSD process name: kernel_task

  Boot args: kext-dev-mode = 1

  Mac OS version:

  A 16, 323

  Kernel version:

  16.0.0 Darwin kernel version: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64

  Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD

  Slide kernel: 0 x 0000000015200000

  Text of core base: 0xffffff8015400000

  Text __HIB base: 0xffffff8015300000

  Name of system model: MacBookPro11, 5 (Mac-06F11F11946D27C5)

  Availability of the system in nanoseconds: 5562983687

  last load kext to 5127051852: com.apple.driver.ApplePlatformEnabler 2.7.0d0 (addr 0xffffff7f97b15000 size 28672)

  kexts responsible:

  com WCH.usbserial 1

  com Kaspersky.NKE 2.3.1a8

  com Kaspersky.kext.Klif 3.4.2a30

  com.apple.driver.ApplePlatformEnabler 2.7.0d0

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleGraphicsDevicePolicy 3.13.60

  com.apple.driver.AppleHDAHardwareConfigDriver 276.26

  com.apple.driver.AppleUpstreamUserClient 3.6.4

  com.apple.driver.AppleHDA 276.26

  com.apple.kext.AMDFramebuffer 1.4.4

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleIntelHD5000Graphics 10.1.8

  com.apple.iokit.IOBluetoothSerialManager 5.0.0f18

  com.apple.AMDRadeonX4000 1.4.4

  com.apple.driver.AppleCameraInterface 5.57.0

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHV 1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 5.0.0f18

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleMuxControl 3.13.60

  com.apple.kext.AMD7000Controller 1.4.4

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleIntelFramebufferAzul 10.1.8

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.driver.AppleBacklight 170.9.10

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.iokit.SCSITaskUserClient 394

  com.apple.driver.AppleUSBStorageCoexistentDriver 404.1.1

  com.apple.driver.AppleUSBCardReader 404.1.1

  com.apple.driver.AppleTopCaseHIDEventDriver 102

  com.apple.driver.AppleUSBTopCaseDriver 102

  com.apple.iokit.IOBluetoothUSBDFU 5.0.0f18

  com.apple.driver.CoreStorageFsck 540

  com.apple.iokit.IOAHCIBlockStorage 295.1.1

  com.apple.driver.AirPort.Brcm4360 1100.37.1a16

  com.apple.driver.AppleAHCIPort 326

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 39

  com Apple.filesystems.HFS.kext 366.1.1

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 5.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 5.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 171

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.DspFuncLib 276.26

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOSurface 152

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 5.0.0f18

  com.apple.iokit.IOBluetoothHostControllerTransport 5.0.0f18

  com.apple.iokit.IOBluetoothFamily 5.0.0f18

  com.apple.driver.AppleHDAController 276.26

  com.apple.iokit.IOHDAFamily 276.26

  com.apple.iokit.IOAudioFamily 205.11

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.IOPlatformPluginFamily 6.0.0d8

  com.apple.driver.AppleGraphicsControl 3.13.60

  com.apple.kext.AMDSupport 1.4.4

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.driver.AppleThunderboltDPOutAdapter 4.5.3

  com.apple.AppleGraphicsDeviceControl 3.13.60

  com.apple.iokit.IOAcceleratorFamily2 288.13

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOUSBMassStorageClass 4.0.4

  com.apple.iokit.IOSCSIBlockCommandsDevice 394

  com.apple.iokit.IOUSBMassStorageDriver 131.1.1

  com.apple.iokit.IOSCSIArchitectureModelFamily 394

  com.apple.driver.AppleHIDKeyboard 197

  com.apple.driver.AppleMultitouchDriver 367,6

  com.apple.driver.AppleInputDeviceSupport 76.1

  com.apple.driver.usb.IOUSBHostHIDDevice 1.1

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.1

  com.apple.driver.CoreStorage 540

  com.apple.driver.AppleXsanScheme 3

  com.apple.iokit.IO80211Family 1200.12.2

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.driver.usb.AppleUSBXHCIPCI 1.1

  com.apple.driver.usb.AppleUSBXHCI 1.1

  com.apple.iokit.IOAHCIFamily 288

  com Apple.filesystems.HFS.Encodings.kext 1

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.driver.AppleThunderboltDPInAdapter 4.5.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.5.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.3

  com.apple.driver.AppleThunderboltNHI 4.1.3

  com.apple.iokit.IOThunderboltFamily 6.2.1

  com.apple.driver.usb.AppleUSBHostPacketFilter 1.0

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.1

  com.apple.driver.AppleUSBHostMergeProperties 1.1

  com.apple.driver.AppleBusPowerController 1.0

  com.apple.driver.AppleEFINVRAM 2.1

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 444

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 5.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  System profile:

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 152), Broadcom BCM43xx 1.0 (7.21.171.10.1a16)

  Bluetooth: Version 5.0.0f18, 3 services, 17 machines, 1 incoming serial ports

  Bus crush: MacBook Pro, Apple Inc., 27.1

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533642465238412D50422020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533642465238412D50422020

  USB device: USB 3.0 Bus

  USB Device: Card reader

  USB device: Apple keyboard / Trackpad

  USB Device: USB Bluetooth host controller

  Serial ATA Device: APPLE SM0512G, GB 500,28 SSD

  Model: MacBookPro11, 5, MBP114.0172.B09 of BootROM, 4 processors, Intel Core i7, 2.5 GHz, 16 GB, MSC 2.30f2

  Network service: Wi - Fi, AirPort, en0

  Graphics card: AMD Radeon M370X, AMD Radeon M370X, PCIe, 2048 MB R9 R9

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Uninstall Kapersky. His tendency to interfere with the operation of the computer while offering little or no benefit.

  Uninstall Kapersky

• iPhone 4 strange issue please help

  

  ABY ideas why the back of my iPhone is "popping" off? Only appeats folded... white frame never dropped.

  Anyone know why this is happening?

  Could be a swollen battery

• 6.1 Data Protection issues, please help me!

  Hello guys,.

  I have installation 6.1.1 DP (12 GB of ram and 4cpu) on the host VMware + vCentre 5.5u2, my first backup seems works very well but now it sutcks to 92% for far too long for machine only 1 guest with a size of about 600Gbyte.

  I see this info in the log file:

  VDDK:DISKLIB - LIB: numIOs = 4900000 numMergedIOs = 0 numSplitIOs = 0

  VDDK:DISKLIB - LIB: numIOs = 4950000 numMergedIOs = 0 numSplitIOs = 0

  ...

  What does numIOs mean? There is a kind of method for estimating how long does take to full employment?

  Another question is why in POS, when I try to create the new replication task, then select "image comments / application backup under" and select customer individually is not any client listed? list is empty

  Thank you very much!

  Andrew

  Your first backup will take more time.  The backup is probably still running.  Replication tasks only replicate the backups that have completed.  Once a backup is complete, you should see the individual servers listed.  Have you run a POS disk performance test?  If so he has managed?