Color Laser CM1015 does not print color

Hello, I hope you can help.

I can't print in color with my MacBook Pro on a Color LaserJet CM1015.  The rest of the Office is based on PC and there is no problem, but my documents are produced only in black and white.

We had a Setup for Windows disk, so I downloaded the software for Mac on the HP site, but it will still come out with no color.

Any ideas?

Thank you very much

Nancy

If you can mark it as resolved, we would be grateful.

Thank you.

Tags: HP Printers

Similar Questions

  • red laser toner does not print on M476Nw MFP

    Just bought a new HP Color Laserjet Pro MFP M476nw. all put in place smooth like silk, but the red ink will not print. I ran the calibration print several times but it isn't print a calibration page. It is said print document but nothing doesn't come out. What should I do next?

    Hi DCLEE,

    I'm sorry to know that you have problems with your new HP product.

    This product has an internal calibration procedure, it does not print a page during or after calibration.

    In addition to the calibration page, are you able to print other documents from the printer? I understand that printed pages do not encounter red (Magenta) color pictures.

    Try printing a test page for the engine and check if all 4 colors are printed.

  • 2015dn laser jet does not print

    I just bought a 2015dn HP HP listed as no longer supported. The manual that I could print said I should use the driver universal PCL6 or 5th. They do not work; Although I had a single page to print from my drive hard but then nothing. What do you think that the solution can be?

    I am running windows 7 on a 64-bit. I also tried to set up the printer on a windows 7 32 bit, with no result.

    WeBa,

    No problem at all. Please use the forums of HP.

  • Laser color CP1025nw spray: printer does not print

    The LaserJet CP1025nw color does not print when I click on 'print '.  The green light is, as if the printer is ready to print.  Ordinary laser printing paper is properly loaded in the tray.  The black toner is 70% and the three colors are all<10%.  i="" have="" set="" the="" printer="" to="">

    When I click on 'Print' there are no sounds of the printer, however, the green light remains on constantly.  It does not, Flash as it does when you're printing.

    This printer can print grayscale with empty color cartridges?  I am trying to print a b & w text.  If so, what should I do?

    Thanks for any idea that you can provide.

    JBC2

    Hi @JBC2,

    I see that you have problems printing and want to know if you can print grayscale if the colour toners are exhausted. I'd love to help you.

    If any toners and are completely exhausted, the printer will not continue to print until they were replaced.

    Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

    HP LaserJet Pro CP1025 and printers color CP1025nw - printing a Configuration Page.

    I have provided a few steps if the problem is software partner.

    Fix permissions of the drive on the Mac:

    Close all applications.

    In the Apple menu, click OK, click Applications, and then click utilities.

    Double-click disk utility.

    Highlight your hard drive / partition on the left.

    Click on check and then repair disk permissions.

    Restart the computer...

    Reset the printing system:

    Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

    Click on the Apple icon and then click on System Preferences.

    Click Print & Scan.

    Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

    Click OK to confirm the reset.

    Type the name and the correct password.

    Click OK to reset the printing system.

    Then click on the sign to add the driver, highlight the printer +.  Then click the Add button.

    How is the printer connected? (USB, Ethernet, WiFi)

    If you appreciate my efforts, please click on the button below the thumbs up.

    If there is anything else I can help you, let me know. Thank you.

  • HP Deskjet 990cxi does not print color

    HP Deskjet 990cxi had for many years with no problems.  Once the color has begun to come out in pink, I replaced the cartridge from the printer and now it does not print in black and faded rose.  I replaced the cartridge with an another new and still the same results.

    Can someone help and let me know what I need to do?

    Hello LoBaan,

    Welcome to the Forums of HP Support! I see that you are not able to print in color on your HP Deskjet 990cxi, you replaced the cartridges without success. I would like that you start here: lack of color, wrong color or cast in print, follow these steps to resolve the problem you are experiencing.

    Let me know the results, I'll watch for your reply.

    Thank you

  • Inkjet e: 5740 5740 printer does not print color cyan &amp; alignment problem

    Hello

    Recently, I replaced my lights on my P 5740 printer ink cartridge while trying once photograpgh print [6 x 4] & have had nothing more than headaches since.

    The cyan color does not print ink levels indicate that it is used. I cleaned the heads of ink at level 3. I have replaced the ink cartridge & still have the same problem and now the alignment is unsuccessful.

    I'm challenged to begin with technology & this challenge is both frustrating and disappointing that I do not understand what I did right.

    Any suggestions before I have packing the printer & return to Staples?

    Thank you

    HI @RC23,

    Because the printer is only a couple of months I suggest to HP customer care and ask about a replacement printer. Most likely, it is a matter of ink system, since you've already tried another cartridge with the same results. Check the model number and the form to receive a file number for faster assistance.

    Thank you!

  • Officejet 6310 does not print in color but Mac prints a color scan

    Officejet 6310 does not print in color but Mac prints a color scan

    Awesome!

    Thank you very much.

  • HP Deskjet 3050: deskjet 3050 does not print the JPG files in color - all other documents are printed only in black and white

    Dear all,

    I have a problem with my Printer 3050 Deskjet. (USB connected with my laptop).

    My printer does not print documents colors in color, but only in black and white (with the exception of JPGs (photographs) which are printed in color.

    Word or PDF documents (for example) are always printed in black and white - even if they are in color.

    Copy of pages in color on my printer is not a problem.

    This works perfectly well. The printer is connected to my PC via USB.

    Cartridges (color and black and white) are practically new and original HP cartridges.

    Could the problem be associated I could have changed by accident print settings.

    Thanks in advance for your advice.

    Cheticamp

    Hi Cheticamp,

    In controlling panrl → devices and printers.
    Right-click on the printer and select Printing Preferences.
    Cot the Advanced button and make sure that grayscale printing is set as stop and confirm.

    From within Word, click file > print and click settings.
    You will see the screen Lady printing preferences.
    Press Advanced Options and check the optio grayscale is set as off for Word as well.

    Hope that helps,
    Shlomi

  • OfficeJet 6000 E609n: One color (black) does not print

    Background the color black does not print.
    Background page printed from the printer status indicates that there is no black ink. This impression has said that there is sufficient (at least 20%) supply of three coloured inks. Per the comment above, no black printing does appear on the page printed of the status of the printer, even if the black cartridge has been rather recently installed (2015-12-24).
    Background none of the four "low ink" lights on the printer are turned on.
    Background the State indicated by the HP Solution Center utility displays a green check mark, that is to say, that everything is OK.
    Background the "estimated ink levels" in the utility HP Solution Center indicate that the black ink cartridge is about 60% full.
    Background I've done the first of these two cleaning procedures to clean the print head. It produces no change. (In fact twice.)
    Background I removed the power cord to the printer and unplugged the power cord from the source and then wait 10 seconds. Then I reconnected things together. Nothing has changed.
    Background I cleaned the vent for the black cartridge.
    Background I replaced the black cartridge. The level indicated on the "Estimated ink levels" in the HP Solution Center utility now indicate that the black ink cartridge is 100% full.  No change.

    Background now, I think that the problem may be the print head.  I am discouraged.

    Any suggestions?

    Hi @Upper_Left,

    It seems as if the HP product registration service is temporarily unavailable.

    Normally you get invited to register immediately after installation is complete.

    It's a Web page that can help you know if the printer is listed, or as aid re-register once the number of available service - Registration Question Index.

    The term of defective kernel is used which means that the defective part you are replacing is the same part that you send back.

    When you select the option to change the replacement part is usually repaired or refurbished, is why there is such a difference in price between the parties. It seems that if the defective part is not returned within the specified time. 'faulty base tax' is loaded.

    I can't say for sure 100% that the problem will be resolved to the replacement printhead. If the printer was in warranty, it would be the normal order of operations.

    Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.
     
    Thank you!

  • Photosmart HP 7510: Single color does not print

    Hello

    Does not print the magenta color. I put a new cartridge in (both are new and not expired).

    As requested by another post on this page, I have cleaned the contacts on the cartridge and printer with clear water. Did not help.

    I ran a printed report that says in the text that all is well, but the magenta is very slightly ridged (so not quite Miss).

    One of the ideas for what I can try next? Appreciate any help you can offer.

    THX!

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

    If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  • printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

    Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

    Hello

    • What were the changes made before the problem occurred?

    You try to run this fix and check.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    If above does not work, try contacting Lexmark support for assistance.

    http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml

  • My HP psc 1110 printer does not print the color pages by using the hotkey (F12) PRINT button

    I have window xp home system and the printer HP psc 1100 Series (HP psc 1110 precisely).  My problem is that when you use the dialog system (Ctrl + Shift + P set keys), it prints color pages; Whereas, when I use the button PRINT keyboard on the microsoft intelli-type wireless keyboard, it does not print in black ink and not in color.  Could someone please sort this out for me, how for it, so it will print color even when I use the correct keyboard shortcut key photography. Or tell me why it behaves as it behaves at the present time. I'd really appreciate it.

    Thank you very much.
    Naseer Malik

    Hello

    Try the methods provided and see if they help to resolve the issue.

    Method 1:

    Try to download the latest version of the IntelliType Pro 6.31 for Windows XP software and check if the problem persists.

    Reference:

    http://www.Microsoft.com/hardware/en-us/d/wireless-keyboard-1000

    Method 2:

    Reinstall the drivers for the HP PSC 1110 all-in-one printer and check if the problem persists.

    Reference:

    Printer HP PSC 1110 all-in-one

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=90787

    Method 3:

    This problem may also occur if the keyboard shortcut key do not work correctly, try the steps of troubleshooting provided in the link.

    Fix shortcuts or Volume control keys not working not not on Microsoft keyboards

    http://support.Microsoft.com/kb/932875

    Note:

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    322756 (http://support.microsoft.com/kb/322756/ )
    How to back up and restore the registry in Windows

  • 6500 more E710n-z: black color does not print

    I can not get the black to print.  All the other colors print OK.  Put in a new cartridge blk (though even the former was still 3/4 full) and that has not worked.   A ran the HP print and scan doctor, says all this bbut OK still does not work.  Clean the print heads several times, still does not work. Unplugged and powered by the printer, still nothing.  Any ideas...?

    The here document has troubleshooting which can help solve the black does not print on your Officejet 6500 has more.  Be sure to check the vents.  If the above does not resolve the problem, the message here can help.

  • CP1020 HP does not print in color low ink bc BW

    Hello

    I've been struggling with this for months...

    Of course, this printer color cartridges run out after 50 pages or so... terrible... but at least the BW prints nearly 500 pages... not bad...

    Anyway,.

    Whenever the COLOR cartridge is low, it FARM DOWNS ANY impression, especially BW... I can't print on BW, when well even the cartridge BW is full... WHY?

    I chose the option to "continue" to print on device settings when the color cartridges are weakening... and yet, it still does not print...

    IS THERE A WAY TO BYPASS THE CARTRIDGES COLOR AND PRINTING BLACK AND WHITE ONLY? I can NOT BELIEVE HP MADE some THING so SIMPLE SO COMPLICATED... they are supposed to be leaders in printing technology and yet they cannot even conceive something that should be so simple...

    Help, please!

    I corrected thanks... something in the control panel of configuration/printers... Administrator has been selected then 'it' could only print... Vista, Multiswitch is generally a FKN JOKE... It's my last Windows computer... Bloggy one MAC

  • OfficeJet Pro 8620: Does not print color

    My 8620 Pro Offoce prints only in black except when I print a test page. I have a Mac running OS X El Capitan. I have updated the drivers so that changed with hp ink cartridges ink cartridges. I can't understand why nothing prints in color. Can anyone help?

    Welcome to the HP community @Walt_1,

    I wanted to tender hand to try to help with the problem you are having with your Mac running 10.11 does not print black when you use your Officejet 8620. As the test print black pages, we know that the printer itself works fine, and the problem is software partner. Here are some steps I suggest for you to try.

    Let me know the results if you please!

    Testify of my answer by hitting the thumbs to the top slot

    Click on the button "Accept as Solution" if I helped you reach a solution.

    Good luck, I hope this information helps

Maybe you are looking for