Color Laserjet 3600

I have cleared a paper jam and in the process removed the black toner cartridge. When I try to reinsert the cartridge, it seems to go all the way to the right but the left does not completely seated and seems to be hitting something. I don't want to force it. Any suggestions?

I solved this problem on my own. I ordered a Partshere (about $55,00) Service Manual. I've identified the broken part that prevented the cartridge insert on the left side. ($2.84 + shipping costs) I removed the covers appropriate following the steps described in the manual. I replaced the part broken and reconnected in the spring that activates it. All reinstalled. Printer test and 'voila' everything is fine. Part the hardest thing was to identify the part of the exploded in the manual.

On a scale of 1 to 10, what I call an expensive 8

Tags: HP Printers

Similar Questions

  • Adding a HP Color laserJet 3600 to a box of Windows 8.1

    I have a fully connected MS Windows 8.1 box that I am trying to add a HP Color LaserJet 3600n printer.  The printer shows in the window "Devices" (settings-> PC-> PC and devices-> devices settings), but not in the Panel "View devices and printers" window.  When I try to add the printer, it does not show in the menu "add the driver", so I downloaded the driver from the HP website.  I guess now I need to use the option "have disk", but I have no idea where the driver has been installed!

    Please notify.

    eearl

    I found the documentation on a work-around using the Vista driver to

    :http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/topIssuesDisplay/?sp4ts.oid=5010...

  • Color LaserJet 3600n's standard paper tray

    We have a Color LaserJet 3600, who had a problem with the standard paper tray being stuck.  Could not get out until we were able to get inside the machine and press the metal plate that makes up the paper when the drawer is in the printer.  After we got him we found a small piece of plastic broken on the end of the right side of the metal plate that sticks through the plastic side of the tray (see picture).  Someone know where I can get this plastic piece without having to buy the whole set?

    In general these tidbits on the bins of paper, like this one, is not available by themselves. We can check the HP parts store to see if the part is available, but probably it will take to get the tray as a single unit.

    I hope this helps.

  • using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative. * beep *.

    using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative.  * beep *.

    I was able to recreate what you see.   I managed to work around it by installing a different driver that is also supposed to be compatible with the CLJ3600.

    Please consider trying this as a possible solution:

    (1) uninstall the driver CLJ3600 by opening printers and fax machines, driver selection and right-click on it and select Delete.  Once it is removed, right-click on an empty space in the windows printers and faxes and select Server properties.  Click the driver tab, click the CLJ3600 and then click on remove.

    One when you're done, restart, and then install the CLJ3500 driver.  This is a previous version of the driver that has been implemented for the CLJ3600 and is compatible with the CLJ3600.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=315862&prodNameId=315867&swEnvOID=228&swLang=8&mode=2&TaskID=135&swItem=LJ-16838-3

    After installation, try printing again.

    The output I have indicates it will print is more negative.  Please let me know if you have success.

    One caveat about this solution.  The Color LaserJet 3500 doesn't support duplex.  Of workaround only works for two printing on the package of basic or the Color LaserJet 3600 N.

  • Yosemite and hp printer color laserjet 3600n hp office jet pro 8600

    Hello

    I've updated the maverick at yosemite. The last update for the printer software has been installed (version 3.0 on October 1, 2014). But both printers not working anymore.

    Color laser jet 3600n stops after 10% of printing with the PCL XL, subsystem kernel error, error: data, missing operator: sole source, post 14.

    With the OfficeJet Pro 8600, it is quite similar. The printer starts loadin page. After a few minutes the printer push the empty pages. In both cases the Mac lost the connection to the printer for a while. After a few minutes the connection is established.

    The system is OSX Yosemite 10.10

    Color LaserJet 3600 driver version 2.0.3

    connected to the cable / Hello

    Serial number [personal information deleted]

    number of Procuct Q5987A

    OfficeJet Pro 8600 N911a

    connected without wire/Hello

    FW-version CLP1CN1322CR

    Serial number [personal information deleted]

    driver HP Officejet Pro 8600 2.0 version

    Product CM749A number

    Information device of the HP utility software.

    A response in the German forum was helpful:

    • reset the printing system
    • Reinstall the printer HP (HPPrintDriver3.0.dmg) update
    • restore volume access rights,
    • Restart the system and
    • Reinstall the printers

    After that, the two printers works previous.

  • Color Laserjet 3600n does ' t print. Message "looking for printer." New ethernet cable - no improvisation

    Color Laserjet 3600 n does not print. "Looking for printer" message in the printer window. Tried the new ethernet cable-no improvement. Printer turned, restarted the computer and enabled printer back - no differrence.

    Internet works fine. Help, please!

    The software update referenced actually comes from Apple.  If it's not showin your software updates Apple, then you can manually download it here:

    http://support.Apple.com/kb/DL907

  • HP Color LaserJet 3600n Laser printer

    AAAI has recently updated computer from XP to Windows 7, now this printer print custom. I tried to download the new driver, but HP 3600n does not appear as a compatible printer, how can I use this printer with Windows 7?

    According to the website of HP support for Color Laserjet 3600 series, you can use the Vista driver.

    Their instructions on how to do this run (click on 'Get software' in the following link for instructions): http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=501046&prodTypeId=18972&prodSeriesId=501044&swLang=8&taskId=135&swEnvOID=4062

    You can get the Vista driver: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=501046&taskId=135&prodTypeId=18972&prodSeriesId=501044&lang=en&cc=us

  • HP color laserjet 4550n: HP color laserjet 4550n

    Hello

    There are two issues related to:

    (1) I have a HP Laserjet 4550n and it does not connect via USB.

    (2) when I go to HP to find the drivers for windows 7 64 bit, then click ok... it gives page not found.

    Is there someone on the forum who has made a successful conversion using a parallel to usb cable of IEEE1284c?

    Someone at - it all got the real drivers to make this printer work with windows 7-64 bit?

    Here many lift this situation and running, but I have no other place to ask for help

    wontonsoup

    First off usb parallel cables are hit and Miss.  Windows 7 like also to detect automatically printers so even if you get a good adapter it finds the printer, but then cannot find the driver even if drivers for other LaserJet color work with this printer.  If you have a small home network or a wireless router to open the ethernet port, suggest that buy you a map of EIO Jet direct from ebay.  They cost about 5-10 US.  You can use the 601N or 615N.  Install the card in one of the EIO housing at the rear of the printer.  You just remove the 2 screws that fix one of the dishes of the cover and install the card in the slot with power off.  You connect the ethernet cable to the router or switch, turn on the printer while holding the big green button until cold reset appears in the display of the menu and then release the button.  When the printer is ready, wait 2 minutes and then go to the information on the printer menu and print a configuration page. The second page will have network settings including the ip address of the printer.  This ip address to add the printer.  You go to devices and printers, add printer, then down creates the port and in the drop-down menu, choose standard tcp/ip, and then follow the instructions until you get to the page of decision-makers.  You choose the hp on the left and then on the right scroll HP Color LaserJet 4650 if the list or of any color except 3600 laserjet model.  Top finish and print a test page and it should work.

    http://www.eBay.com/Sch/i.html?_odkw=HP+610n&_osacat=0&_FROM=R40&_trksid=p2045573.M570.l1311.R4.TR3.TRC1.A0.H1.TRS1&_nkw=HP+Jetdirect+610n&_sacat=0

  • Windows 7 and HP Color LaserJet 3600N

    HP did better still.  No Windows 7 for Color LaserJet 3600n driver!  You can fill in the blanks...   However, using Windows 7 Professional, I could install the XP drivers.   Download software XP and it runs in a virtual XP session.  I then added the printer as Windows 7 would cause you to do.   The add-in has not completed correctly - CTRL/ALT/DELETE.  However, the printer has been added, and it seems to work.   Maybe HP and Microsoft are pushing the broader Windows 7 Professional.

    Hello world

    Download and install the software the complete solution for this printer on the link below.

    Complete software solution for the HP Color LaserJet printer series 3600

    HP LaserJet - support Windows 7

  • HP Color Laserjet: HP Color LaserJet - lines/stripes

    Hello

    I have a HP color LaserJet and I get a lot of lines and streaks on my printed pages.

    I also note toner inside the printer and my printer seems to take cleaning cycles more than before.

    Thank you!

    Although I work for HP, my posts are MY opinion and not those of HP.

    I would recommend some of the things

    First of all, make sure that your firmware is up-to-date, go to the page software and drivers on HP.com download and install the latest firmware available for the printer.

    Then, make sure that the toner collection unit is not complete

    Finally, print a cleaning of the control panel of the printer page, normally, you should select the following text in the menu:

    • Maintenance of the unit
    • Calibration / cleaning
    • Cleaning page

    You can also view this document as well.

    HP Color LaserJet Enterprise M552, M553 and MFP M577 - lines/stripes, toner and cleaning cycles dust excessive

    Hope that helps.

  • Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

    I can use WIndows 10 if the fix is available for this OS.

    I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

    Any help would be greatly appreciated.

    Thank you

    Hello

    Install the following firmware for your printer, and then look for a difference:

    http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

    Kind regards

    Shlomi

  • Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

    Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

    I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

    I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

    I had care of do not connect USB until you are educated.

    I tried repeating the installation without uninstalling first and get the same result.

    I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

    I tried to do a right click to run the installer as administrator and get the same result.

    I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

    The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

    I tried to connect via USB 2.0 and 3.0 ports.

    I cleaned recycle them and temporary folders.

    I have updated the firmware of the printer to the 20160331 version.

    Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

    I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

    Thanks for any help solving this.

    I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

    DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

    1. go into the Device Manager and find the printer in the list of devices

    2. right click on the printer and select "Update Driver software"

    3. click on "Browse my computer for driver software".

    4. choose "Let Me pick one...» »

    5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

    6. click next and back to the installation of hp box and must now see the printer and continue the installation.

    -Alex

  • Color Laserjet 2550 L and XP SP3

    Hello

    I installed XP SP3, last week and since I was not able to print from my color laserjet 2550 L printer. I tried the windows troubleshooting printing suggestions for the use of different drivers, but no luck. Any body out there got any advice, it's a pain not being able to print.

    Thank you very much

    If there is no Purifier not listed on the Web site nothing listed in your programs menu or add remove software window, then all you have is a base driver installation.  Following the steps listed for remove driver and the entrance to the server properties should be sufficient.  Manual uninstallation is for printers that have utility programs or use Software Solutions of Support or Director.  Even still, following the instructions provided here should at least bring basic functionality.

  • LaserJet pro 177: bought used hp color laserjet pro mfp m177

    Installation disk arived broken. How can I do to replace it.

    Just upload what you want the site web theHP.

    http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  • HP Color LaserJet 4550: HP Color LaserJet 4550 PCL XL error

    I use this printer for years.  It works beautifully.

    Windows 10 has just done an update & the printer driver disappeared.  I use this printer with a HP Jet Direct J4135A usb card.  Now any driver or what I do I try to install or use, I get the same error message.

    I am trying to use the printer driver's upd-pcl6 - x 64 - 6.3.0.21178.exe.  The printer driver appears in the settings & is by default we & they say that everything works correctly.

    Can you help me please?  I don't want to go out and buy another printer.

    PCL XL error

    Subsystem: KERNEL

    Error: UnsupportedProtocol

    Operator: 0x0

    Position: 0

    Found the solution for everyone that might have this problem.

    Just right click on the printer icon in the Device Manager and select printer properties / Advanced / change & driver driver HP Color LaserJet 4550 PCL6 ranking to HP Color LaserJet 4550 PCL6 and click OK.  That's all there is to it.

    Now, it will work with USB (HP Jet Direct J4135A Card) that is not supported, instead of just supported network.

Maybe you are looking for

  • How to add music from ipad to computer

    How can I add my music purchased from ipad to the Windows computer using iTunes?

  • Compatible batteries for Satellite L655-1E8

    Hello What computer model Toshiba, battery, is compatible with Toshiba Satellite L655-1E8? Grateful in advance for the answer

  • Operating system uses too much ram

    My operating system uses too much ram I don't know why? as shown in the picture... I just open chrome bt still its with 1.2 GB of ram of 2 GB... I don't know what the problem... I quit also all unnecessary applications to windows startup... the probl

  • How to export the browser history?

    Hello I want to my history of browser of a profile export and import it to another. I discovered that the history of the browser including bookmarks are in the file called places.sqlite. But when I import this file in a new profile, it is also import

  • using a custom field - noob

    Hello I'm quite new to Java programming, I followed some of the guides provided on how to create Blackberry applications, though.  However I followed a pdf document called development, which describes how to create custom controls/fields.  The proble