Color LaserJet 500 M551: printer displays error message: error PCL XL and GE issued WARNING 75

Similar Questions

• LaserJet 500 m551 - print CMYK color

  Hello!

  I need to print separations on m551 color LaserJet 500 files.

  In particular, I file separations there was only CMY colors.  And black color (gray) got to mix C, M and Y.

  I had used PLC and PS driver, changed options, but printer uses all colors. Black color in use, I have seen on the photo printed by microscope.

  What should I do to correct printing?

  Best regards, Alexander.

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do to Printers - LaserJet. Click new message.

  I hope this helps.

• Color LaserJet 500 M551

  Hello

  the color of our 500 M551 LaserJet printer prints a black line on the right side of each page followed by a point each ~ 7, 6cm, see image.

  Its hardly predictable in the attached scan, but I hope you can help me out here.

  What is the reason for this?

  Thank you.

  Replace the black toner cartridge.

• HP Color LaserJet CP3505n: 3505 printer fuser error

  I have a fuser error 50.9 and followed all the troubleshooting steps. Still no luck. Will need to take to repair Monday, but want to make sure I did everything what I can here before. Very frustrating.

  Have you replaced the fuser unit?

  You can buy a unit of merger used to less than the work that you will be charged for the diagnosis.

  Then the repair shop will sell you a unit of fusion for about 40 per cent more that you would pay for a new fuser unit if you bought it online.

  If the fuser unit has been hard to replace, I would say, take it to a ship, but this one is too easy.

  You can buy a CP3505 work with toner for less than the cost of a repair. (eBay)

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• LaserJet 500 m551 no project don't print option on Mac OS x 10.7

  We use a range of HP LaserJet 500 m551 color printers in my office and it takes too long for the photos to print. When you print a picture of a Mac OS 10.7 (jpg) images, there is no option to print a "draft" or the low resolution copy. The only option is a 1200 dpi or 3600 which takes several minutes. I have looked in the setting of printer options and don't find paper quality, management of the colors that are not useful for this purpose.

  We have the prints in color printing on plain 8.5 "x 11" page, so choose a grey scale or black & white version is not only useful. We need to print these quickly so that our staff can consult the arranged on tables for selection purposes.

  All of the Apple software is up to date, and the HP printer driver is up to date also. Most of the photo files are large - 2 MB or more - allowing for high quality printing on a press when selected for our magazine advertising.

  When I print the same photo from a PC, I have a version of the project option and begin printing immediately.

  By HP support by phone, I was told that it is a limitation of the application or the program and not the printer. That makes sense (iPhoto on the Mac vs. Windows Live Photo on the PC), however, our previous HP LaserJet printer offers a print project option in iPhoto that suggests a limitation of the driver for me.

  We will replace the printer by another speeding up the Mac printing unless this can be resolved. Help is appreciated and/or a printer recommended for the Mac.

  Thank you

  Mary

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do so at http://h30499.www3.hp.com/hpeb/

  I hope this helps.

• My printer (laserjet m1210) continues to display error memory power

  My printer (laserjet m1210) continues to display error memory power. What is and how to fix it?

  Hello world

  There is a clip on the chip on the cartridge's protective plastic. Remove the orange plastic, and he's going to quit giving you the power of memory error. Refer to figure 6

  Power supply memory error "Message is displayed on the control panel

  

• I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  Thanks Ray,

  Hello... How can I get the manual download for all the error on any printer laser color spray top of HP range.

  Kind regards

  Monday Nwankwo

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi

• HP Color LaserJet 1600 Laser printer does not

  After I installed Windows 7 instead of Vista on a 64-bit HP laptop, I had problems with my printer (HP Color LaserJet 1600 Laser Printer).  The test page works well, but some applications, such as the Windows Photo Viewer that comes with Windows 7, produce nothing but totally black pages when I try to print photos (it's black, not white).  The strange thing is that, if I insert a picture in a Microsoft Word 2007 page, it prints well!  In addition, other applications are unable to make use of the printer, such as Adobe Reader 9 and Adobe Photoshop Elements 7, who refuse to recognize the printer.  Is this a known issue with a solution?

  Hello

  I suggest you to follow the methods and check.

  Method 01:

  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 02:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• 1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  Try this FixIt:

  Code error '0 x 80070646', '646', or '1606 ' when you try to install Office updates

  http://support.Microsoft.com/kb/2258121

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• LaserJet 500 M551 color does not print double sided

  Hello

  I have the strange situation of a having one of three Laserjet 500 printers that won't print two-sided, despite the same to the other settings both. I tried a factory reset, checked all the settings several times and it has not changed. Everything on it works fine, and I'm at something of a loss, so any help appreciated.

  Run a config page and compare the model number with the other printer config page. Configuration page is located under the administration menu and then reports.

• HP Color Laserjet M476dw MFP: Of memory error on the HP Color Laserjet M476dw MFP printer

  Help please,

  I have a printer of HP Color laserjet M476dw MFP, its connected wireless to my computer mac laptop and it was working fine but suddenly today it appers error low memory which is strange, the file size is not more than 400 Ko, a simple solution to get red of this message pleassssssssssssssssss.

  I removed the printer and he added once again, the name of the printer seems to be good and show connected.

  Thank you.

  Shahid

  No, I did not change the toner, but I found the solution.

  This solution worked for me and my printer works now. You also try MAC OS.

  Remove the printer in printers and Scanners.
  Click on the button +, select the Protocol IP on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

  Good luck

• Remove and check color HP PSC 1610 printer cartridge error message.

  Original title: remove and check color cartridge

  My printer HP PSC 1610 rpet 'Remove and check color cartridge'. After that, I press 'ok' and the message still appears. What is the problem with the printer? Thank you.

  Hey cobra10,

  Fortunately, there is an article by HP Knowledge Base that talks about this problem. Please follow the solution provided in the article below to solve the problem.

  Remove it and check [color / black / photo] error message appears on the screen of control of product and the product does not print.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Color LaserJet 4600 PS: Driver HP Color LaserJet 4600 PS printer Windows Server R2 2012 problem

  Hello team HP,

  We used the driver 32 bit printer "HP Color LaserJet 4600 PS" to write the PDF file using Acrobat Distiller in Windows server 2003 operating system.

  But now, we have migrated our production environment for Windows Server 2012 R2 64-bit operating system and using the 32-bit printer "HP Color LaserJet 4600 PS" driver in the operating system Windows Server 2012.

  Is the driver support 32 bit printer "HP Color LaserJet 4600 PS" Windows Server 2012 R2 64-bit operating system?

  If it is not supported then what printer driver will support the Windows Server 2012 R2 64-bit operating system?

  Help us to this problem as soon as POSSIBLE and its very high priority for us.

  Kind regards

  Gaudin. B

  Hello

  CLJ 4600 is not supported on Windows Server 2012. However, you can use HP Universal Print Driver (UPD) for print on CLJ 4600 of Win Server 2012.

  Here is a list of the printers supported with the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04324001#N106AD

  Specification of the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04380141

  Thank you

• HP Color LaserJet CP5520 "impossible Operation completed (error 0 x 00000057).

  I'm trying to install the drivers on a print server on Windows Server 2008 x 64 for a printer HP Color LaserJet series 5520. Someone tried to run the installation package for the 64-bit driver and brought the print server. He installed the HP print monitor, and the print spooler would not start. Trying to solve this problem, the files in the registry and FileDepository associated with this printer model have been removed. The key to the Hp print monitor has finally removed (which was the last entry in the event logs) and was able to start the print spooler and print services have been restored. No further questions with this print server.

  I could add other drivers to the print server using the Add Wizard driver without any problem. That it is a 64-bit server, I try first to add 64-bit driver, but I get the error "unable to add series HP Color LaserJet CP5520 PCL 6, Type 3 - Mode user, x 64 driver. Impossible operation completed (error 0 x 00000057). »

  I downloaded this driver directly from HP and verified that it is the correct driver.

  I installed the driver on a client computer with Vista x 86, and I am able to add the printer and print on it without any problem.

  Any advice would be greatly appreciated.

  Lucas

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories/