Color Laserjet CP1525nw: CP1525nw - wireless set up: 3 networks

Due to a failure, our cable provider had to replace our modem. We use a router Linksys AC1600 jointly with the modem provided by BrightHouse; We have a hard office connected to the modem and 2 laptops connected wirelessly to the router.

When the modem has been replaced, the installer created network (1). The Linksys AC1600 has two networks (2) and (5). Our computers are connected to the network (5).

I tried to connect the printer to the network (5) using the router WPS button and the printer... bad idea. When I used the WPS button, I lost a wireless connectivity to the network (5) and now only a connection to the wireless network (1).

Found printer Network (2). I discovered that if I changed my computer to the network (2) I can print, however, it's the slower network option.

How can I tell the printer to connect wirelessly to the network (5)? BrightHouse is not able to help with this issue.

Thank you.

Each SSID must have a separate network name.  The 2.4 GHz as TEST and the 5.0 Ghz as TEST50.  It is never the same.  It's how tell you which SSID you are connected to.   If your ISP is a gateway device, you must put it in full bridge mode and turn off the router and just use your Linksys router.

Only printers support eh networks 2 .4GHz.

Tags: HP Printers

Similar Questions

  • HP Color LaserJet Pro M177 MFP: HP Color LaserJet Pro MFP M177 cannot find information network

    I just got my new printer today. I followed the instructions to the letter. Now I try to connect to my network to the "Wireless Setup Wizard" that my router does not support WPS. I sat waiting for the printer view all networks in the range so I could choose mine and continue on. However, after 15 minutes of waiting, I decided to go shopping while he did his thing. I came back 1 hour later and it's still displaying "Retrieve information from wireless network" with the symbol of HP and a blue bar encircling it. It is not locked up as I can hit the Cancel button and it returnes to the network configuration menu. What I'm doing wrong here? My network uses a router NETGEAR WNDR4500 with security WPA2-PSK [AES] is enabled. It transmits the band b/g 2.4 Ghz and 5 Ghz n band. Please any help would be appreciated.

    Hi @Rieu,

    Welcome to the HP Forums!

    I see that your HP Color LaserJet MFP M177 Pro cannot find the network on Windows 7. I'm happy to help you with this problem of connection!

    Please, take a look through the steps in this guide, "Printer is off-line" Message appears on the computer and the HP printer does not print. Thus, this guide, the printer is not maintaining the wireless connection.

    Tips for troubleshooting wireless problems

     
  • HP Color LaserJet CP1525nw: Can't get CP1525nw connected to the network wireless Netgear Nighthawk x 6 R8000

    I have never been able to successfully get the printer installed by wi - fi with any stability, so we always connected via USB and shared. I bought a new router and would like to be able to print to this printer wireless anywhere on my network. I can't out of connected mode and mode wi - fi printer. Your software crashes, crash facilities to half way through. The printer indicates an IP 169.254.xxx.xxx, if the network is aware, but it's I can get. None of the HP tools will run under this operating system, they hang immediately upon launch. It's frustration none! Someone out there was a bit of luck with this printer!

    Dell XPS 8700 16 GB of RAM

    Earn 8.1 (64-bit)

    Comcast TG862G Gateway (POS)

    Router wireless Netgear Nighthawk x 6 R8000

    HP LaserJet CP1525nw color printer range

    Hi @jrmunn ,

    I want to help you get the printer works on the wireless network.

    There are a few different ways to install the printer on the wireless network.

    • Thanks to the support WPS.
    • Through the installation, by connecting the USB port, it will configure the wireless.
    • Once the USB installation is done. You can configure the wireless via an Ethernet connection.

    Cycle power to the router.

    First, we must restore the defaults on the printer.

    Press the OK button on the printer, go to the service, and then select restore default settings.

    Print a printer configuration page to make sure that the IP address and SSID are erased.

    Print a Configuration report.

    Uninstall the printer software.

    WPS configuration method:

    To connect your printer to your wireless router wireless using WPS:
    (your router must support WPS)

    Start the mode of the WPS button on your printer.
    Within 2 minutes, press the WPS button on your router.

    Then run a printer from devices and printers Add Wizard.

    The USB method:

    Perform a clean boot on the computer and disable the Antivirus software and any analysis in real-time in the Antivirus software also. How to perform a clean boot in Windows.

    Then run the installation immediately after connecting the USB cable, follow the steps described in this document to update the drivers so that's not new error. A fatal error during Installation of the software. Then the installation should continue. (you can use this procedure for any type of installation)

    If you are still having problems and you have an Ethernet cable, we can install the printer as a USB connection again and then configure the printer via wireless Ethernet.

    Method of Ethernet:

    Restore the default settings of the printer.

    Connect the printer to the router with an Ethernet cable.
    Wait about 1 minute and the printer must have a valid IP address.
    Print the configuration page to get the IP address of the printer.
    Type the IP address in the address bar of Internet Explorer which should open the printer's built-in web services page.
    Installing wireless over here now.
    Click the networking, wireless on the left, fill in information about the network and apply the settings.
    After the confirmation, then disconnect the Ethernet cable.
    Now you should have a flashing light on the printer in 1 minute wireless about.

    Print a printer configuration page, to get the new IPv4 address.

    Then create a new port with the new IPv4 address.

    In the devices window and printers, click right on the printer and on the left, click on printer properties, select the Ports tab.

    Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  • Color laserjet CP1525nw will not print in color

    I installed the PCL6 and PostScript drivers on my Surface Pro 3 to print to my LaserJet CP1525nw color.  The printer is connected to my router.  The printer prints, but only in shades of gray.  What can I do to be able to print in color and continue to print through my router?

    My printer is connected via USB. I installed the full version of the software, and everything works now. Thank you!

  • Printers Multifunction LaserJet 1536dnf impossible to set up the network in Lion scanning

    Hello

    I'm trying to configure ethernet scanning using my Laserjet 1536dnf. I am able to set up the network in Lion scanning. I was able to do in Snow Leopard. Can someone help me? It would be much appreciated. Thank you

    Hello

    If you have previously installed software, be sure to remove it using the option of the scrubber:

    * Please note that the following steps will delete all HP software installed.

    1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
    2. Select Applications
    3 select the Hewlett-Packard folder
    4. double-click on uninstall HP application
    5 follow the uninstall to prompt to select a device to uninstall
    6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
    7 approve any prompt to uninstall all HP software.

    Once done, download and install the full functionality of Lion software:

    http://FTP.HP.com/pub/softlib/software12/COL41268/IM-100565-1/HP_Lion_LJ_SW_v12.13.26.dmg

    Make sure to install any update HP available by clicking the Apple icon, then software update

  • Color LaserJet CP1525nw Printe: CP1525nw transfer cleaning/replacing the belt

    I have a blue streak (3/4 "wide) running down the right side of my impressions. I opened the drawer of the cartridge and looked inside and noticed the same stripe width running down the right side of the transfer belt. Obviously this belt needs a cleaning at least or a replacement at most. My question is: can anyone give me a figure "approximate" on what is a cleaning or a replacement cost? I paid $199 for this printer. The following printer I have in mind will cost me $249. I love the printer I have and I would keep it if it is cost effective to repair. Thanks for your comments.

    You have a bad cyan toner cartridge. Actually remove the cyan toner cartridge and chances are that there will be a bunch of toner on the drum. The transfer belt clean as it moves toward the front of the printer as a broom to windshield wipers that remove excess toner before she put another image to be transferred on paper. Since this is only happening in the one color that tells us the belt is fine and the toner cartridge is the question.

  • Color LaserJet CP1525nw: 1 1/2 black lines on the right side and another black spot on the side right laserjet cp1525nw color

    I downloaded the software and latest drivers. It has the latest firmware. I contracted the toner and blown with compressed air. Look in the back for the dust from toner on the sleeve of teflon to fuser. Unplugged, restarted, of course my book has been for laser printers. Ran across several cleaning cycles, recalibrated color, put a piece of paper and toner open door when he was printing. Released A black to see if I could see and toner on blue cylinder. None of the things I've tried have solved the problem. Toner is about 3/4 down. It print fine with this new series of cartridges for quite a while.  I went from my warrarnty.

    .

    The amount of toner from the printer say that there is only an estimate. Your default seems to me that the black toner cartridge is bad. First thing I would do is to replace the black toner cartridge as it should solve your problem.

  • Don't Color LaserJet no power

    Hello

    I have a Color LaserJet CP1525NW and it has no power.  I tried 2 different power cords and nothing... then plug cords of a monitor and they work, so it doesn't seem to be the cord.  I turned the power switch on and off several times, but still nothing.  Does not make a noise.  I don't feel nothing burned and nothing notable prior to this problem.  Any ideas?  Is there a breaker or a way to reset the device?

    Thank you... Jim

    Hey Jim,.

    I see you have a related issue with your Laserjet CP1525nw power.  Looks like you did a large part of the troubleshooting for the device and that the question is internally in the supply circuit of the printer.  Here is the document troubleshooting for the device when a question of power is present.

    The printer will not turn on or respond

    If the steps do not address the issue, so do you know if this printer is still covered by the manufacturer's warranty?

    To check the warranty: http://www.hp.com/go/warrantycheck

    If you need to contact HP Technical Support please use the following link:

    Contact HP worldwide | HP

    Hope this helps,

    Jason

  • HP LaserJet CP1525nw color print quality problems

    I got a HP LaserJet CP1525nw color about 2 months ago. After about 4 weeks, I noticed a print quality begins to degrade. Black started first by streaks and fading. Now when blue prints starts to show streaks and melted a magenta pink. All cartridges are at 50 percent of capacity or more. Any ideas about what to check?

    Hello Graf213,

    There are a few things of different which could cause print quality begin to deteriorate on printouts. My guess is that the printer may need to be cleaned and / or calibrated.

    Troubleshooting HP article addresses print quality issues, and provides for the issue of many resolutions.

    Solving print quality problems

    Perform the steps, and I would like to know the results.

  • My Laserjet CP1525nw disconnects frequently and does not print. What should I do to put online?

    I recently bought a LaserJet CP1525nw color printer. Firstly, I have established a wireless connection, via a router, with an Acer PC (Windows 7 Professional 64-bit operating system) using the CD of the printer by following the guided procedure and with attention to connect the USB cable when asked me to do. The printer worked very well. Then I installed the software in the CD for the printer on an Asus PC (operating system Windows 7 Professional 64 bit) who was in another room of my house and establishes a wireless connection between the Asus PC and printer. During the installation I was not asked to make the connection with the USB cable. I was able to print from the PC Acer or Asus PC regularly. Finally, I have a wireless printer on my laptop (operating system Linux Ubuntu 12.04 32 bit) using the HPLIP software. On the PC the LaserJet has been set as default printer. Printer LaserJet printed all three PC regularly. I left the printer. The next day, I try to print but I did not do it from a PC. The printer display showed 'Ready' and the correct printer (192.168.1.7) IP address. The blue led is on continuously. However open the control panel of the printer on the PC, I realized that the printer is offline. I tried to solve the problem to read the guide to the printer, but I wasn't able to find any suggestion. PC Acer and Asus have firewall Windows is activated and installed AVG antivirus. The netbook nothing. On the Acer PC, I uninstalled the printer and do a new installation using the CD for the printer. After this operation, I was still able to print from a PC, but the next day, the printer was offline again and was not able to print from a PC. Really, I cannot understand what is happening and should deeply grateful to receive any suggestions on your part. Many thanks in advance and best regards. sdrrmit

    This article should help to keep the Wi - Fi connection and solve problems in offline mode:
    http://support.HP.com/us-en/document/c02817031

    Give the steps described a try and tell us if it helps.

    Good luck!

  • Enable Web Services on HP LaserJet CP1525nw

    We are trying to install web print on HP LaserJet CP1525nw service.

    This is a printer over the network from a server windows server 2008 R2 for Windows 7 x 64 machines

    It is connected to a network wired and all (printing etc.) works execpt WebService.

    We manually set DNS 8.8.8.8 and 8.8.4.4 secondary and restarted dns

    We also have white listed IP of the printer on the firewall, so it has access to the internet through the network without be filtered. (Did anyone know what are the IP address for the web services on the HP circuit?)

    When access us the printer using its IP address and go to the configuration of Web Services and click on 'Activate' it is on the screen for about 2 minutes and does not

    "Connection check connection error".

    Any advice is much appreicated.

    Success his works now!

  • HP Color LaserJet MFP M277 Pro: LaserJet MFP M277dw announces its own wireless network

    I just installed a new HP Color LaserJet M277dw MFP Pro and noticed that it creates its own network wireless with the name ' HP-Setup > LaserJet 5 c-277. Even if the WiFi is turned off.

    I don't want the printer to make her presence known on WiFi and would like to know how I can turn this 'feature '.

    What is this function? I couldn't find any information about this in the manual, nor any of the settings of the printer where the name ' HP-Setup > LaserJet 5 c-277 "appears.

    @seron

    Ok...

    Try changing the Direct wireless / activate - or combination is necessary to turn the setting and the close up with the 'off' setting / disabled.

    In other words, no matter what the setting, Direct wireless can light up.

    Leave a few seconds between the time where as you toggle the setting.

    If that does not hit on it free, toggle the setting and then turn the printer off for about 20 seconds and then turn on the printer.

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • Printer driver LaserJet CP1525nw moved

    All of a sudden my Laserjet CP1525nw color printerdriver reinstall on a USB cable. Technical support is unable to find the problem. I also cleaned my registry and my hard drive but nothing helped. I rarely meet driver problems and have never had a printer driver install fail. Can anyone provide any indication this problem?

    I'm under Win. 7 (32-bit) on a desktop computer.

    Hi Ron,

    You are right, it would be something in the operating system at the origin of the problem. Unfortunately I can't help you with issues related to your operating system. The only thing I can say is that you back up your data on the hard drive and then reload your OS. I'm glad to hear that you were able to successfully install the printer on your computer and the other computer. Have a wonderful weekend.

  • Change the language on Laserjet CP1525nw

    My tongue is currently set to Czech and I don't know how to change the language to English on my LaserJet CP1525nw settings

    Hello

    Babou click here 2 - 3 times on the Cancel button to ensure that the printer will display its main screen.

    Click the arrow to the right 3 times, and then click the OK button twice , and the list of languages should appear on the screen.

    Kind regards

    Shlomi

  • HP color laserjet cm2320nf mfp (ff3be2) can be networked with the USB wireless adapter?

    Howdy, first post here - rules of noob.  Search for as well as I could but have not seen this answered.  Recently, we changed the place of our home network router.  We cannot reach our hp color laserjet cm2320nf mfp (ff3be2) Ethernet cable not more.  You ask if we give a wireless (Wifi, no bluetooth) to USB adapter to the USB port of the printer, will be the printer network through it?  Sure it works on computers, but don't know if the printer will look network via the USB port.  In any case, the problem we are trying to solve becomes the printer on our network of origin when we can not connect it via Ethernet.  Thanks in advance.

    Thanks for the reply.  Yes, I thought that I understood that after doing some more than browse the Internet.  Just ordered the Ethernet of IOGEAR Universal for adapter Wi - Fi N.  Hoping that the printer will think it is plugged.  Should do based on what I've read.  Thank you, James.

Maybe you are looking for

  • How can I scroll through email in the list?

    Before the last update, I was able to click on the arrow down in an email, and it would be then just move to the next on the list email. Now he asks me to confirm if I want to just open and read the next unread mail. Blah! not what I want. Having an

  • Satellite 210CS: How can I boot from CD?

    Hello I found my old Satellite 210CS and I want to install Linux on it, but I can not find the floppy drive, I just got the drive of CD-ROM. I changed the boot options in the bios to FDD > HDD but its not not booting from the cd. Y at - it an update

  • Some keyboard keys have stopped working all of a sudden

    Hello world Some of my keys on my laptop keyboard stopped working all of a sudden. I don't know if I accidentally pressed something or if it is something to do with the FN keys, but I'd love to help if someone might be able to!Keys does not: Question

  • Satellite 3000-514: how to enable the WLan Intel 2200BG material button

    Hello. I have a Toshiba Satellite 3000 514 and a WLan Mini - PCI Intel Centrino card. (Provided? � ? ® PRO/Wireless 2200BG) running win - XP and Ubuntu. Is there a solution to work around the problem, the wlan software wants to push me a hardware b

  • HP g60 ssd update

    I replace my HDD with a SDS.  The manufacturer (Kingston) says it might work because the SSD SATA III and the G60 is SATA I, but they cannot guarantee.  Has anyone run this upgradr and it worked fine?