Color LaserJet pro 200 M276nw MFP - Scan configuration and installation on Mac Yosemite

Similar Questions

• Color LaserJet Pro 200 M27nw MFP - problem scanning ADF

  Seems to me a new Color LaserJet Pro 200 M27nw MFP running on a PC with Windows 8 and have come to realize that whenever I scan from the ADF Document (CAD), no output file is generated. The original document is drawn in by the document successfully feeder and the printer display indicates that the scan is ready. However, no analysis file is generated. This happens regardless of know if I send the output to USB or to e-mail and if the original document leaves simple or multiple.

  Interestingly, the ADF works fine if I try to produce paper copies, in other words, the printer is able to pull in the leaves o FRENCH original of the document in the ADF (as this either alone or several sheets) and to produce copies of the original successfully. Furthermore, I have no problem to scan multiple or single sheet documents when the original document is loaded by the Scanner flat, rather than the document feeder Scanner.

  Appreciate any help. Thank you

  Stephen

  HI @StephenScerri ,

  I see by your post that when scanning from the ADF there is no output file containing the scan which is generated on USB or e-mail. You can copy the ADF and scan successfully of the bucket. I would like to help.

  Is this printer the Pro 200 M127nw MFP Laserjet

  I have provided a document for how Scan: Windows 8

  When you scan from the magazine, you get an overview of the analysis of the computer software?

  What is the scan preview, but do not save it to the computer?

  What software are you using to scan?

  Try saving the scan on the computer, if you get a preview, to see if it will save the scan it.

  Please provide detailed results if you're still having problems.

  Have a great day!
  Thank you.

• Color LaserJet pro 200 M276nw: color LaserJet pro 200 MFP M276nw network installation problems

  Set up the printer correctly. Has chosen to use the Wifi option. Wireless computers are able to print to it without problem. Went do my first scan, and it tells me to set up printing to the network drive. So I will do this, and the software HP on the host computer (with USB connection) told me that it can configure not unless that is the printer is connected to a network.

  Obviouslly, it is connected to a network...

  Then disabled Wifi. Is turned off the printer. It connected to the router. Running. And still get the error message. Besides, cannot be found in the menu of the printer (on printer) where I can "setup" a wired connection.

  I'm a nerd of the computer, but for some reason i gots the mute today. Some advice would be appreciated - about the printer that is.

  Oh. You say to add the printer a network rather than USB printer. DOH. So simple. Thank you!!!

• Color LaserJet Pro 200 M276nw: color Laserjet Pro 200 M276nw install problems

  My printer seemed intemitently impression not so I decided to uninstall and reinstall the drivers.  Everything was going well until the installation process decided to scan the network to the printer.  My computer is on the network and able to conencto to the internet and printing is on the network - wireless to the printer status page says and sees the router.  Not sure why he does not see the installer.

  I never could get the recommended pilot plant to work (in the same after following all steps).  Instead, I downloaded the "base" drivers on the site.  Then, I went in adding printers (in Windows features) and manually punched the AutoRun.inf.  Fully managed Windows from there.

• LaserJet Pro 200 M276nw: lost password cannot reset the printer

  Several others have had the same problem with enter the menu of the printer, but lost the password. Help someone please this person (me) happens stupidville and reset or what should I do to get my printer go?

  Hello and welcome to the community of HP @MsBz,

  I understand that you have forgotten the administrative password for your HP LaserJet Pro 200 M276nw MFP color. I'll do it is happy to help you.

  To remove the password, you will need to perform a special reset. I'll message you private instructions you need to do. Note that reset will clear your wireless settings, then you may need to reconnect to your network when you have finished resetting. (It's like the printer out of box at that point).
   
  Let me know if it helps. If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• M276n MFP: HP color LaserJet Pro 200 M276n multifunction

  Hello

  I recently bought color HP LaserJet Pro 200 M276n MFP. I face a problem with fax reception when it goes into sleep mode. Consider for automatic reception, but after an hour the fax does not work and sometimes I have to reset it. I use it for my office. whenever I should to wake up but the Knight, he makes is not possible.

  Thank you very much

   

  Hello

  Try to install the latest firmware for your printer from the link below:

  http://FTP.HP.com/pub/softlib/software13/COL44533/kJ-108130-7/M276_colorMFP_Series_FW_Update-2015021...

  Here's one of his describedenhancements, in my view, that it should solve the problem:

  Addresses an issue where the device may not wake up from sleep mode when receiving a fax if it is connected to an improperly grounded 220v power source.
  

  Please let me know how it goes,

  Shlomi

• Not connected HP LaserJet Pro 200 M276nw

  Hello! I have the Setup:

  OS: Windows 7,.

  Router: TP-LINK TL-WDR4300

  Printer: HP LaserJet Pro 200 M276nw

  Freeware antivirus: Avira

  Firewall: Windows

  The computer connected to a network via ethernet. I installed the network printer (port TCP/IP wirewless, user good reading/writing, shared printer, 6 PLC) and printed all documets in 2013 of Word, it's ok.  After restart of the operating system, printer of the icon is grey and the State not connected. Please help me. Impression of uninstall and install now, Stoped ptrint service, coil clean, reserved IP address of the printer, it all no results.  Some other customers printed successfully via wireless to the printer.

  Hi @green_wanderer ,

  I see that you are having problems printing via the wired or wireless network after restarting the computer, the printer icon is grayed out and showing not connected, but can always print from other computers. I want to help you solve this problem.

  Is the installation of the printer wirelessly or through an Ethernet connection?

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  I would have to power cycle the router, the computer and the printer to see if it will help.

  Print a configuration page to check the firmware version and see if you have a valid IP address.

  If you have a valid IP address for the printer, then try and access the webserver shipped off to the printer, to see if the printer is still on the network. Type the IP address in the address bar of your web browser. (Internet Explorer)

  The IP address of the port on the computer can be different, if the printer has been assigned a new IP address of the afer by restarting the computer. You will need to create a new port, or run the Add Printer Wizard.

  Other computers that are still able to print could have the port configured to print if IP address changes.

  Print a configuration page to obtain the IPv4 address of the printer and the date of the firmware. Printing a Configuration report.

  The new Version is 20140919.  I've provided the URL if you have an old version of firmware update.

  HP LaserJet Pro 200 color MFP M276nw drivers.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  If the problem persists, install a static IP address to see if it will help.

  Printer does not maintain a Wi - Fi connection. Proceed to Solution 3: printer of the assign a static IP address.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you need help, let me know.

  Good day!
  Thank you.

• Service error 49 - Turn Off, then on - LaserJet Pro 200 M276nw

  I was the addition of another post for a different printer but didn't want to Miss anyone with MY printer problem.

  UPDATE * (at least for my LaserJet Pro 200 M276nw)

  I found the cause but will need help from someone at HP to "solve" this one...

  My new guard M276nw throw a 49 Service error, CAT has given a lot of power, voltage on, wait, try again blah blah blah, blah blah fuser problems. 10 minutes from the forum search put me on possible wireless network issues with other printers and the SSID. Anyway after regaining a printer Staples and saw the problem coming up again on a new another brand... I tried the search Forum and Tada! at least I was able to find a cause.

  I have a D - Link DIR-825 wireless router. He has dual band (2.4 GHz and 5 GHz).

  Normally I enabled for the multitude of devices that people have these days in my house.

  I updated the firmware to the last update (20121026) and then restarted.

  Roger restarted shortly after error Service 49.

  Then I disabled the two strips to test each independently wireless band.

  The printer acted normally so I decided allow each band separately.

  When I turn on the 2.4 GHz band in the router, the printer immediately throws an error in Service 49.

  I tested several times (5 to be exact) and every time when the router restarts the printer says error.

  So, I left off 2.4 GHz band and then the 5 GHz band.

  I activated the band 5 GHz 3 times and turned off and found no effect on the printer (at least in a 5 minute window).

  So now I'm left with only a single band wireless router or printer who likes to turn on every 20 minutes or more.

  There is probably a setting (or 2) which can be changed in the router or printer that can prevent this (I hope).

  I just need to find the right person in HP...

  I should have updated this thread I'm sorry, but I found myself updated the same problem on another thread of printer M251nw, since someone has answered that one. I have to keep that one thread - sorry, but it seems to me that I just heard another as well, but for a m475dw as well. Maybe the same problem that I don't know.

  Anyway to update my m276nw situation: After experimenting for a while try to limit I decided to eliminate the possibilities by disabling my router another suggestion of posters to remove the printer from the wireless environment and reset to factory settings. So I turned off my 2.4 GHz band in my router (leaving 5 GHz active), reset the printer and it was sitting still (no reset), he even went to sleep normally. I turned on the 2.4 band and the printer immediately threw the error repeated tent kept the same result no way to leave on the 2.4. The next day so I decided to check my router and found 2 year old firmware. It took several updates to get current and on the last I didn't reset the printer to the factory again and there's no error yet. The printer acted normally for a week, he normally sleeps and wakes. It was turned off (on purpose) a few times and everything seems normal.

  I have not activated wireless again since my house is wired and I could really do without wireless capability, but eventually I want to know.

  My DLink DIR-825 router is still active with both tapes, but using the latest firmware, like the new printer (the other). Is all this took?

  Perhaps.

• M251nw color LaserJet pro 200: does print in black only, no color

  All of a sudden, my m251nw color laserjet pro 200 prints only black. Cartridges changed (C/M/Y) without modification. Toolbox shows that they are all 100%, but nothing will be printed in color, not even the Demo Page. Anyone able to help?

  Updated the firmware from hp, and it fixed the problem.

• Unknown origin of black sheet pulled from a HP LaserJet Pro 200 M276nw

  We got a paper jam on our printer. One of our employees then pulled this black sheet of our HP LaserJet Pro 200 M276nw. This could really be an original work of this printer? Never seen such a thing before, mayby it's just a few packages that I have inside? The printer does work more (paper jam error). Thanks for helping out.

  

  Hi @VL14 ,

  I see by your post that you had a paper jam and the black sheet was removed from the HP LaserJet Pro 200 M276nw while removing the jammed paper. I would like to help.

  Yes, this part sounds like something to do with the material of printers. The printer would need to be repaired.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great day!
  Thank you.

• Mac OS x print duplex LaserJet Pro 200 M276nw

  I recently bought the HP LaserJet Pro 200 M276nw understand that I would be able to do manual duplex printing. However, after reviewing the instructions in the manual and try to understand through various blogs I can't always manually duplex.

  The instructions say that I'll be able to select manual duplex in the finishing menu under Print... However, there is no such menu for me on any program and the "double option" is grayed out. Please advise otherwise I might have to return the printer to find something that will work with printing recto verso or auto manual.

  Hi wegotjoy,

  I see by your post that you are unable to print double-sided on your Mac.

  Check the name of the driver that is installed by the printer. Airprint driver could be installed instead of the printer driver. (usually by default, Airprint)

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen should display the name.

  If the name of the printer indicates Airprint, then it of the Apple drivers, remove it and add the name of the printer back in the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Now try and print both sides.

  On the file menu, click print .

  Open the final menu and click the Manual Duplex or open the Manual Duplex

  menu.

  Click the Manual Duplex check box and select a binding option.

  Click the print button. Follow the instructions in the pop-up window that appears on the computer

  screen before the battery of exit in Tray 1 to print the second half.

  If the problem persists, then download and install the printer driver to see if that will solve the problem.

  Printer HP v.2.16.1 for OS X drivers.

  What operating system do you use? Mac OS X: how to find which Mac OS X Version is on my computer?

  What is the printer name show?

  Please provide detailed results if you're still having problems.

  Have a wonderful day!
  Thank you.

• LaserJet Pro 200: Impression of dark color LaserJet Pro 200 m251nw

  I recently bought and installed a printer of Color LaserJet Pro 200 and have noticed that when I print anything either in the color of the image is very "dark".

  When I print the example page, via the touch screen, the image seems very bright and vibrant. However, whatever it is printed via my computer throug h that an application is dark with almost oversaturated colors.

  I downloaded and installed the most recent driver from the HP site and nothing has changed. The printer is connected wireless to the home network and I tried not directly connected to the computer at the moment.

  Any suggestions would be greatly appreciated.

  Hello

  In the Printing Preferences screen (click Properties or settings of the print dialog box in the application used to print to access printing preferences screen), try disabling the HP EasyColor option in the color tab.

  Also try to select the themes of different colors like photograph (sRGB) or Photo (Adobe sRGB).

  You can see any difference with the results then?

  Shlomi

• LaserJet Pro 200 M276NW color does not print more than once; application freezes

  Hello.  I had a problem with Laserjet Pro 200 color M276NW my family when printing from my desktop Windows 7 (64 bit) for quite awhile.  The first time I print a document after starting my computer, it prints the entire document very well.  However, the print jobs will simply freeze the program that sent them (for example Outlook, Opera, etc.) on a screen ' print the page of.  Also, I can't print a test page in Windows when the first task is completed.  I finally realized that it probably has something to do with the spooler service in Windows, or in the print queue.  When I look in the queue after printing the first document, it shows that the paper in it, but the new job that froze my app does not appear.  After I restarted my computer, I can print a document more before I have to restart again.

  The printer is networked on our home network; It is not connected to any computer via USB, and in my opinion, is the connection to the ethernet router.  My computer is connected to our network via a wireless connection.  I tried to restart the spooler, enter the IP address of the printer in my web browser (which works fine and shows the right page), and everything else listed in the Help article.  Try to open the printer properties in devices and printers does nothing.

  To complicate, the printer won't even print the first work since I got on my computer and I tried this today.  Also, I got exactly the same problem on my laptop, which also used Windows 7 and connected to our home network wireless. The laptop now has Linux on it instead. I tested several printing on it earlier and they print very well.

  My father, who has a wired connection to the router, told me that it is able to print more than one job very well.  I just had my brother (who also has a wired connection) print two different documents, and it has worked very well.  This leads me to believe that there is somehow something to do with the Wi - Fi computer assigned to the router, in combination with Windows 7, apparently.

  Moon Raker, starting with the sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

• Printers Multifunction LaserJet Pro 200 m276nw: memory is low. Job cancelled

  Hello

  I'm new to the forum.

  I have a problem with my Laserjet Pro 200 with a message "memory is low. Cancelled work. »

  I read the other posts with similar questions and tried to do a hard reset to turn on him for 30 second and turning point. The message always appears.

  I tried to update the firmware, but the printer says that no updates are.

  I use a Mac Mini running on 10.9.5 software. I tried to update the firmware via USB, what has not worked at all.

  How can I access the memory of the printer and clear the whole print or add memory to the printer?

  I need help!

  Hi @Med_Stud10 ,

  I read your post and see that you have found an "Out of memory" error when you try to print. I will definitely do my best to help you.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet M276)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver, you may need to click the drop-down list to select the printer name to add it in.

  Try to print again.

  I've provided the steps to set up the printer via the IP Protocol, if the problem persists, which regulated the other 'Out of memory' errors

  Print a Configuration page to get the IP address of the printer. M276n of MFP HP LaserJet Pro 200 color and M276nw MFP - print a Configuration report.

  Remove the printer in printers and Scanners.
  Click on the + button, select the IP Protocol on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

  Try to print again.

  For the analysis, however, you can select the printer Hello.

  If you're still having problems, try the reset I will send you a private message.
  In the forum next to your handle name simply click on the envelope to see.

  Please let me know the results.

  Good day!
  Thank you.

• Color LaserJet Pro 200 M251 nw: unable to do manual duplex printing with Windows 10

  Using my prior desktop computer that ran from Windows 7, I had no difficulty to do manual duplex printing on my HP LaserJet Pro 200 M251 nw color.  However, having recently bought a new desktop computer running Windows 10, I have more two-sided printing option.  Instructions to Guide the user to http://h10032.www1.hp.com/ctg/Manual/c02886939 are unnecessary because I cannot complete step 3, click Finish.  After completing the first two steps by clicking on file - print and then click Properties or preferences, I am not provided with an option to "print on both sides (manually)" as described in the User Guide.  How can I get manual double-sided printing capability on Windows 10?

  Usually when you have a driver problem, it is best to find the current driver on the HP website, disconnect the printer from your PC, remove the existing driver, and then install the current driver.

  Windows often installs drivers that do not support as many features as the downloadable driver.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...