Color LaserJet PRO M277 MFP: HP Color LaserJet PRO M277 MFP Fax

Hello

I'm using my new printer HP COLOR LASERJET MFP M277 PRO and his works fine. I just have1 problem, I want to fax a document and I can't seem to do. Can you please explain me how to fax.

Thank you

Hi @RitaR07and welcome to the community of HP.

I read your message, ask questions about how fax on your HP Color LaserJet MFP M277 PRO, and I want to help him.

Below, I've posted a document that explains how to set up the printer for faxing, as well as how to send a fax. Please try all the steps in this document and let me know the results, as well as the problems or the error codes that you met.

Send and receive faxes with the HP Color LaserJet Pro M277n MFP and printers M277dw

I hope this helps.

If this help will testify of my answer by hitting the thumbs to the top slot

Click on the button "Accept as Solution" if I helped you reach a solution.

Tags: HP Printers

Similar Questions

  • HP Officejet Pro 6830: Receive faxes with a HP officejet pro 6830 w / answering machine

    I had an OLD officejet model that could receive faxes even if the answering machine was not connected directly to the fax machine the 6830 manual says that it must be directly connected.  My current Brother printer does NOT receive faxes because of this problem.  Anyone know if I directly connect my machine to this model (Officejet 6830) to make it work?  I won't buy it if it will not work.

    Hello @JPJ408,

    Welcome to the Forums of HP Support!

    I understand that you are looking to buy a printer all-in-one HP Officejet Pro 6830 for fax purposes. While the User Guide advise you to plug the answering machine directly on the back of the Officejet unit, it is not necessary.

    If you have a fax with an answering machine on her line, the only requirement is that the fax is set to two rings higher than the answering machine. Most of the responders are put back on 4 rings. As a result, you would set your Officejet to automatically pick up on 6 rings. In this way, when a voice is heard, you can manually respond to the call before the answering machine to pick up. If you are not home and then people can still leave messages on your answering machine. If you have a fax to come through, do not respond. The answering machine will pick up after 4 rings. At this point the fax machine "listen" on answering machine message and if fax tones are detected, the fax will take over and receive the fax.

    I hope this helps clear up any confusion.

  • OfficeJet Pro 8600 N911A: fax wireless

    I need to be able to SEND faxes.  Is it possible to configure my Fax on my Wireless HP Officejet Pro 8600 model N911A?

    Welcome to the community of HP @BARBEO,

    I understand that you are looking to set up your HP Officejet Pro 8600 fax functionality. I'll be happy to help you.

    It is possible to configure your HP Officejet Pro 8600 to fax, however, fax can be used through your wireless network, so the printer will be connected with a telephone cord. Below, I've posted a link to a document that has some instructions on how to configure the functionality of your HP Officejet Pro 8600 fax. Please try all the steps in order and get back to me with the results.

    HP Officejet Pro 251dw, 276dw, and printers of the 8600 series - set up the all-in-one to send and receive faxes

    If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

    I hope this helps and have a nice day.

  • HP Laserjet Pro 200 Color MFP FAX answering machine vs M276nw

    We have the following MFP: HP Laserjet Pro 200 Color MFP M276nw

    Our office has a phone line to be shared between the phone and FAX (M276nw). The phone is a phone single line of integrated with a digital answering machine Panasonic KX-TG7531 model. I can't seem to find the right combination of settings for ringtone for the phone and the FAX that allows callers to leave a voicemail without the FAX modem tones interfere when the caller leaves a voice message. It's as if the fax does not recognize that the answering machine picked up and he continues to make sounds of modem. The tones are saved as well as the message of the caller's voice, which makes the message difficult to understand. In most cases, the caller simply hangs up without leaving a message (we've heard talk about this later).

    Please tell us how to implement. Thank you!

    Furthermore, the HP Laserjet Pro 200 Color MFP M276nw replaced a MFP from brother, but the Brother FAX has worked with the same phone from Panasonic.

    Hi crmarrio

    I understand that you are having problems of fax.

    Run this test for the fax.
    In the home screen, press the button on the key.
    Tap the service button.
    Tap the fax service.
    Touch run fax test.

    Check all these fax settings.

    Here is a url for the fax troubleshooting.

    http://support.HP.com/us-en/document/c03363598

    Go to the icon/fax setup menu/Advanced Configuration key / private receive/disable it.
    Go to thewrench icon/service/fax service/error correction/stop.

    Go to Settings icon/fax thewrench / fax/advanced/change configuration to speed it to the middle.

    Go to the key icon/fax installation base/menu Configuration/response/game of rings rings.

    (if using an answering machine-more rings on fax and answering machine or rings of mail without a voice for the fax, but receives no voicemail, should get installation of distinctive ring on the line in this case)

    Go to the key icon/fax setup basic menu setup/response/selection of auto mode.

    Go for a key icon/service menu/fax service/clear saved faxes

    Go to key icon/fax installation base/menu setup/distinctive ring/set for proper ringtone type. (if you don't have a special ringtone set on all ringtones.

    Update the firmware of the printer by usb connection.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&docName=c03363598&LC=en&product=5097654&

    Let me know the results of the fax test, and if you were able to send or receive a fax.

    If you're still having problems, let me know and I send you private message how to reset the printer.

  • LASERJET PRO 200 COLOR MFP fax of failure?

    I bought 200 COLOR MFP LASERJET PRO but I don't see any failure of fax for each fax sent. This option is to go to the menu fax and printing various reports from there. I was wondering this adjustable device upward so it prints fax delivery report after every fax sent?

    Hi bananko,.

    Welcome to the HP Forums.

    I see you want to receive a confirmation by fax for faxes.
    I'll be happy to help you.

    What is the name and the product number of your printer? How can I find my model number or product number?

    You have the printer Laserjet 200 M276?

    If you have a different model, let me know.

    Here are the instructions for the M276.

    Touch Menu Fax icon on the printer screen, select Fax, Fax of Confirmation reports. You can change the settings to receive a fax confirmation after every fax sent.

    I hope this helps.

    Thanks for posting on the HP Forums.
    Have a great day.

  • HP Color LaserJet M277dw MFP: FAX ACTIVITY LOG QUESTION

    Hello

    I was wondering if there is a way that I can choose how far from going home with the fax activity log. I printed an activity log this morning but it goes up to 11/08/2016. I need to go a little further back. Is it possible to choose how far back?

    Thank you
    Natalie

    Hi Nathalie,.

    The fax activity log is limited to 30 fax jobs, any previous activity log is registered is no longer, and cannot be recovered.

    Kind regards

    Shlomi

  • LaserJet pro m127fn mfp: fax log report

    How to open a journal report or faxes Fax activity? Not only the most recent Telec.

    solved; found the report of activity under Configuration > Fax reports

  • LaserJet Pro M1536dnf troubled fax send... just saying fax work added but does not send

    I have a LaserJet Pro M1536dnf, which is used as a stand alone Fax.  When we try to send a fax, the document is scanned, but instead to send the fax, it says Fax added task.  When you check the status of the fax machine it says nothing is stored and the fax is never sent.  I've updated the firmware to the last and it worked for a bit, but now it don't send faxes again.  He will receive faxes without any problem and can reproduce documents as well.  Is there anything else I can do to try to solve this problem.  I went through all the troubleshooting steps that appeared on the Web site.

    Appreciate the help!

    Hi jloo,

    Please check your private messages and let me know if the steps fixes your problem?

  • Can I change the background color in the picture and Fax Viewer?

    I would like to make the bottom of the picture and fax viewer to black instead of white. The slide show has a nice black background. Is this possible?

    I'm afraid that is not possible (AFAIK).

    See you soon!

  • HP Officejet Pro 8600: Receiving fax nobody's just get lines

    He works very well, but today when I sent a fax, they received what it takes in lines (such as a bar code).  I have tried a different fax number and they have had the same problem.

    Hi @Jazoola

    These lines appear when you copy or scan too? You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

    In this document, you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

    ↑ This is not limited to the Laserjet printers.

    We will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

    In addition, please click the appropriate link below to make sure that the printer has the latest firmware update. This update of the firmware can improve the performance of the printer and fix various defects.

    HP Officejet Pro 8600 N911g_n Firmware (more models and premium)

    HP Officejet Pro 8600 N911a Firmware (8600 e - all-in - One Printer)

    I hope this helps.

  • OfficeJet Pro 8500 A909n: Fax e-mail digital configuration, but always print incoming faxes

    How to set up this AIO to prevent to print incoming faxes, redirected to email (digital Fax Setup)?

    Thank you

    FredVe

    Hello FredVe

    The following can be found on page 91 of the user manual. (Officejet 8500 manual)

    To change the settings of the device control panel

    1.

    Press the (Setup) button, select Basic Fax Setup, then Fax to PC.

    2.

    Select the setting you want to change. You can change the following settings:

    View PC hostname: displays the name of the computer that is configured for

    administer a Fax to PC.

    Turn Off: disable the PC Fax.

    NOTE:

    Use the Solution Center to turn Fax to PC.

    Disable Fax print: choose this option to print faxes as they are received. If

    you clear print, color faxes will be always printed.

  • OfficeJet pro 6830: continuous fax tone

    I recently bought a HP Officejet Pro 6830, I do not use the installation of fax and therefore it is not connected to a phone line. All the time that printing is turned on there is a tone of continuous fax from the printer, I tried to disable all the Fax options on the Tools menu, but nothing can stop the very annoying tone - of ideas?

    Thanks for that Z, they send that another block so hope it does the trick - John

  • OfficeJet PRO 8600 digital Fax

    My Officejet PRO 8600 will receive my faxes but not store them digitally plus. A PDF file is displayed in my incoming fax folder named output.pdf with 0 KB in size and does not open. Made for about 8 months to a maximum of 2 days. I have Windows 8. Help?

    Hello @StarrCann,

    Welcome to the HP Forums!

    I understand that your digital faxes do not open on your computer using the Officejet 8600. I will do my best to help you! I suggest the setting up of the digital fax on your computer again. I'll give you a document from HP on Setting Up Digital fax HP to save received faxes on your computer.

    You must delete the old folder digital fax your computer first, before proceeding with this document. Please post your results, I will be looking forward to hear from your part, have a great day!

  • OfficeJet Pro 8600 wants fax info when asked to print

    OfficeJet Pro 8600 prints test page ok, but do not print anything My Documents or a receipt from a purchase online.  A screen will appear with corner 'Send fax' at the top left, boxes of 'to', 'add a cover page', 'Add scan' and 'settings '.  There is no error message or the number.  Tried to remove and reinstall the printer drivers and.  Worked fine for 2 months, then started it.  It is not connected to a phone line and has never been used for faxing.  It is connected to the wireless computer network.  Tried to connect to the network with cord - also not able to print.  Any help appreciated.

    Hello

    I guess that the fax printer is set as default, download and execute HP Print and Scan the link below Dr utility.

    www.HP.com/go/Tools

  • OfficeJet Pro 8500 a Fax Copier Scanner has streaks dark on most of the page but exit the printer seems

    HP OfficeJet Pro 8500
    Series # {information}

    CM755A model

    The printer prints using the printer and the output looks fine. However, when you use scan, copy or fax characteristic of the printer, there is gray stripes dark page that covers almost the entire page. Have tried resetting, cleaning all areas and still have the problem. What is the problem? Is there a diagnosis of the printer that I could run? No error code will appear. Any guidance is appreciated - thank you!

    Looking at your attachment, the unit seems to have a bad scanner and must be replaced. If your in the United States, contact the HP support @ 1800-474-6836 to see what alternative options are available

Maybe you are looking for