Color Laserjet Pro M477fdn: Fax M477fdn w / win 10

This is a new printer. I tried to install it from the CD and download complete installation and get the same results. On Windows 7 will install the fax driver. 10 Windows, it is not listed in the list of issues that will be installed and it is not there after installation. Is there another way in 10 Windows to connect to the fax on this printer? If not, when will there be a driver of Windows 10 fax for him?

Hello

Download and install the HP Fax universal driver below:

Be sure to exract the first zip file (right-click > extract all the files and follow the instructions on the screen.)

Open the extracted folder, right-click on Setup.exe and select run as Administraor.

http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7529320&swItemId=ds_146586_2&swEnvOid=4192

Once installation is complete, print to the HP Universal Fax Driver print queue and follow the instructions on the screen to select your printer, then check the box to add a queue to print to your printer, so you can directly select it next time.

Kind regards

Shlomi

Tags: HP Printers

Similar Questions

  • HP Color LaserJet Pro M477fdn MFP (CF378A)

    Hello, I was wondering if the multi function HP Color LaserJet Pro M477fdn MFP
    (CF378A), can function as a fax server machine in a network local lan?

    Thank you

    Nope.

  • HP Color LaserJet Pro M477fdn: M477fdn not taken fully supported on Mac?

    Hello, we have a new HP M477fdn.

    We have a question about printer drivers and utility software, please: why is there not a printer for the series M477 profile?

    It is a great printer, then sitting our old HP 4050dtn, wired Ethernet connection.  Firmware datecode is 20160331.

    We have two computers running Mac OS X 10.9.5 "snipers".

    We have installed the most recent HP printer software update (hpprinterdriver3.1.dmg) downloaded from the apple.com website.

    We have also installed most of the HP (hp-printer-essentials-L - 4_9_0.pkg) downloaded from hp.com.  It is necessary to download this because the program "HP Easy Start" does not, as several other people have reported on this support forum.

    In "System Preferences"-> "Printers and Scanners"-> the only option to implement this printer is "Generic PostScript Printer.  It works, but it seems to have limited functionality.

    In system preferences, we found the profile to configure fax: "HP Color LaserJet MFP M477 Pro. Fax' and that works as expected.

    In system preferences, we expected to see a profile to set up the printer: "HP Color LaserJet Pro MFP M477" but that does not exist.  Why not?  What do we lack?

    Thank you!

    Suite, for the record.

    With Mac OS X 10.9 "Generic PostScript printer" is the only option.

    The M477fdn works with Mac OS X 10.9, and as seen below, you miss a lot with "Generic PostScript Printer."

    We tried another Mac with 10.11.2 "El Capitan", which, at the time of writing, is the latest version of the OS.  Yet once the program 'HP Easy Start' did not work, so we used the same "hp-printer-essentials-L - 4_9_0.pkg ' downloaded from hp.com.

    The only additional functionality that we see to print with Mac OS X 10.11 is a check box "Printing black & white."

    Your mileage may vary.

  • Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

    Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

    I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

    I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

    I had care of do not connect USB until you are educated.

    I tried repeating the installation without uninstalling first and get the same result.

    I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

    I tried to do a right click to run the installer as administrator and get the same result.

    I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

    The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

    I tried to connect via USB 2.0 and 3.0 ports.

    I cleaned recycle them and temporary folders.

    I have updated the firmware of the printer to the 20160331 version.

    Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

    I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

    Thanks for any help solving this.

    I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

    DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

    1. go into the Device Manager and find the printer in the list of devices

    2. right click on the printer and select "Update Driver software"

    3. click on "Browse my computer for driver software".

    4. choose "Let Me pick one...» »

    5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

    6. click next and back to the installation of hp box and must now see the printer and continue the installation.

    -Alex

  • Color LaserJet PRO M277 MFP: HP Color LaserJet PRO M277 MFP Fax

    Hello

    I'm using my new printer HP COLOR LASERJET MFP M277 PRO and his works fine. I just have1 problem, I want to fax a document and I can't seem to do. Can you please explain me how to fax.

    Thank you

    Hi @RitaR07and welcome to the community of HP.

    I read your message, ask questions about how fax on your HP Color LaserJet MFP M277 PRO, and I want to help him.

    Below, I've posted a document that explains how to set up the printer for faxing, as well as how to send a fax. Please try all the steps in this document and let me know the results, as well as the problems or the error codes that you met.

    Send and receive faxes with the HP Color LaserJet Pro M277n MFP and printers M277dw

    I hope this helps.

    If this help will testify of my answer by hitting the thumbs to the top slot

    Click on the button "Accept as Solution" if I helped you reach a solution.

  • Color Laserjet M252N: HP Color Laserjet Pro printer M252N for Windows XP Embedded Standard.

    I can't install the driver HP Color Laserjet Pro printer M252N to my machine (OS: Win XP Embedded Std version) without an internet connection.

    1 error message are requested in advance for MS .net framework 3.5. (after that, I download and installed: NETCFSetupv35.msi)

    I found the name of the printer in the list of drivers, but then I try to add a new printer with this driver, the pop-up error message and the installation is not complete.

    My question is: the HP Color Laserjet Pro printer M252N are not compatible with Win XP Embedded Std?

    Please help, even the HP sales technician unable to answer me to this questation.

    Hello

    The HP Color Laserjet Pro M252N Featuer software complete is not supported on Windows XP, however you can get the features of the printer using HP PCL 6 Universal Print Driver listed on page 9 of the User Guide, be aware that the Service Pack 3 must be installed on the operating system to use the printer:

    Make a right click my computer and select Properties - locate Service Pack 3 in this form... If Service Pack 3 is not the operating system MUST be updated first:

    http://h10032.www1.HP.com/CTG/manual/c04475955

    You can download the HP Universal Print Driver below:

    http://ftp.HP.com/pub/softlib/software13/COL39348/LJ-95977-14/UPD-PCL6-x32-6.2.1.20636.exe

    As Windows Embedded edition is an edition of the customized version no official support is guaranteed.

    It is a customized operating system version includes only the components of the operating system selected for specific needs.

    Those selected by the OEM computer and not necessarily include any component required by the HP software or hardware.

    Try to install the printer and see if this can work, however it can work as explained and may not only the manufacturer of the computer can respond if such material can be installed on the operating system or not...

    Kind regards

    Shlomi

  • LaserJet pro 177: bought used hp color laserjet pro mfp m177

    Installation disk arived broken. How can I do to replace it.

    Just upload what you want the site web theHP.

    http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  • HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

    Hello

    I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

    When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

    My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

    Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

    the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

    In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

    I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

    My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

    Thanks in advance for your help,

    Lorenzo

    Hi Lorenzo,.

    To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

    You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

    Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

    http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

    If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

    http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

    Kind regards

    Shlomi

  • HP Color LaserJet MFP M277 Pro: No software or drivers are available for HP Color LaserJet Pro M277dw MFP

    Trying to download the latest drivers (I couldn't scan with Easy Scan more after the release of macOS sierra 10.12) I received the following massage

    http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-m277-series/7089945/model/...

    No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product home page.

    PS: My OS has been identified correctly in the web page.

    Hi @pisca46,

    Thank you for joining the HP Forums!

    I understand that there is no drivers for your HP Color LaserJet Pro MFP M277dw on Mac OS X 10.12 Sierra. I am pleased to see that for you!

    You are right that there are currently no drivers available at this time. In the meantime, I suggest trying the rest of this guide, of install a printer Mac driver by using Apple Software Updateand then try using the Apple Image Capture.

    Otherwise, all we can do is wait for the drivers and software provision, or plan to use an older version of Mac OS X.

    If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

    I hope this helps!

  • color laserjet pro m252dw: How do to return/difficulty recent update of firmware for hp color laserjet pro m252dw as now does not

    My printer color laserjet (color laserjet pro m252dw) no longer works due to not recognize a black cartridge to third because of a recent update of the firmware. Error given is 'Supply memory error'.

    I already looked to the top of the page of Software Support for this printer, but new and recent firmware update is not released/listed, only the firmware upgrade market is given.

    I'd appreciate advice and instructions on how to return/repair my printer no longer print.

    Can you please advise on which firmware update to install instead to get my printer back in the order of operation?

    Thank you very much

    Geertje

    PS: HP: how VERY boring; next time that I'm in the market for a printer I have will conduct the review of my options

    According to the other thread that I have commented on the user managed to solve the problem of roll back firmware version 20160331 to 20150716 .  Unfortunetly the user did not comment if the old version of firmware is out so that we can share a simlilar solution.  It may be that this person had a copy archived in offline mode or found another source outside the HP support Web site.

    At least you can get an older version of firmware all the steps that we share for the firmware downgrade won't do you no good.  I'd be careful to search a German site for firmware updates.  HP has put regional locks in place according to international contracts, that they do to market their products in a given region.  Using a German firmware on a printer WE made may have strange side effects on what types of cartridges are allowed.

    What is perhaps a better use of your time would be to contact your 3rd party cartridge company and see if they can send you a cartridge that is compatible with the new firmware.  Chances are that they have seen the same problem with other users and already have a chipset to work around the problem.  In this way, you can stay on the newest firmware and continue to use your favorite too cartridges.

  • Color Laserjet MFP M176n Pro: Color Laserjet Pro MFP M176n stuck on initializing, Toner carousel will not go

    Hello

    Our Color Laserjet Pro M176n MFP is stuck at initializing, since the last time that the yellow toner cartridge has been replaced. After the replacement of the cartridge, the toner carousel turned, started making rattling noises and then stopped. She does after every start. It seems that there is something blocking the movement of the carousel, since I can't move it even manually as described in of many other forum posts on similar problems. Is there a way to access the back of the carousel to see if there is something blocking it from moving?

    Thanks for letting me know @samuelm.

    I don't see any other way to access the tonics. The printer will need to be repaired. Thank you!

  • Color LaserJet Pro M177fw MFP: HP Color LaserJet Pro M177fw MFP is not not color copy

    Hello, I have a HP Color LaserJet Pro MFP M177fw, when I try to copy in color mode, the printer gives me the newspaper (on the LCD screen), color copy is limited. I did not have a password for the printer. and this error is seen when you use both scanner feeder and flat bed.

    I appreciate your comments and thank you in advance for your help

    Best,

    The gesture would be to try to restore the default settings of the control panel of the printer.  Conflicting configurations on disabling color copies would be destroyed and normal again.  Resets are normally under the admin menu or the control panel service.

  • Color LaserJet Pro 200 M27nw MFP - problem scanning ADF

    Seems to me a new Color LaserJet Pro 200 M27nw MFP running on a PC with Windows 8 and have come to realize that whenever I scan from the ADF Document (CAD), no output file is generated. The original document is drawn in by the document successfully feeder and the printer display indicates that the scan is ready. However, no analysis file is generated. This happens regardless of know if I send the output to USB or to e-mail and if the original document leaves simple or multiple.

    Interestingly, the ADF works fine if I try to produce paper copies, in other words, the printer is able to pull in the leaves o FRENCH original of the document in the ADF (as this either alone or several sheets) and to produce copies of the original successfully. Furthermore, I have no problem to scan multiple or single sheet documents when the original document is loaded by the Scanner flat, rather than the document feeder Scanner.

    Appreciate any help. Thank you

    Stephen

    HI @StephenScerri ,

    I see by your post that when scanning from the ADF there is no output file containing the scan which is generated on USB or e-mail. You can copy the ADF and scan successfully of the bucket. I would like to help.

    Is this printer the Pro 200 M127nw MFP Laserjet

    I have provided a document for how Scan: Windows 8

    When you scan from the magazine, you get an overview of the analysis of the computer software?

    What is the scan preview, but do not save it to the computer?

    What software are you using to scan?

    Try saving the scan on the computer, if you get a preview, to see if it will save the scan it.

    Please provide detailed results if you're still having problems.

    Have a great day!
    Thank you.

  • Color Laserjet Pro M476dw MFP: HP Color Laserjet MFP printing problems M476dw Pro

    Only, we installed our printer HP Color Laserjet Pro MFP M476dw yesterday and I noticed once it is published a PCL XL Error report instead of what I was printing.  I don't think that anything from him, but today, it happens almost all the time.  I tried to find possible solutions and stumbled upon everyone says to disable AVG...  We do not use AVG, we use MSE.  Is it a driver problem or else?  Any help would be appreciated.  Nothing more annoying than to try to use a new printer and it is not working properly.

    I went to the site HP dl had the HP Universal 5 driver and installed it and now it's printing even more crazy.  I enclose a photo of what he does.  It is not fair to Quickbooks, it does also in PDF, Word, and Outlook.

    I shouldn't have as many problems with ANY NEW MACHINE!

    The trainer would be relatively easy to replace, from what I've read your machine should be guaranteed if you need to contact HP support and they can send you another.

    You might even be able to find an authorized service provider who will come out and fix it.

    And if its brand new and you bought it in a store to resume.

  • M251nw color LaserJet pro 200: does print in black only, no color

    All of a sudden, my m251nw color laserjet pro 200 prints only black. Cartridges changed (C/M/Y) without modification. Toolbox shows that they are all 100%, but nothing will be printed in color, not even the Demo Page. Anyone able to help?

    Updated the firmware from hp, and it fixed the problem.

Maybe you are looking for

  • At Apple from liability? Support error!

    How to combat the irresponsibility of APPLE? The Office of official support for Apple in Russia (telephone 8-800-333-51-73) gave wrong information (No. address 1166414133). After the implementation of the recommendations of support, I lost the video

  • Satellite L650 - recovery leads to deadlock

    Hello I have a Satellite L650 my wife here. It has become quite slow and don't respond very well, so my wife asked me to re - install 'as costs of the store. Yes, I did a recovery DVDs! So, I put in, pulled up to the laptop and went through the recov

  • Old program

    I have an old program built on Microsoft access (Loft Pro) that I use in my hobby of pigeons, but xp is the last OPS it will run on how can I go to find someone to help me move forward, the company that created Loft Pro is no longer active

  • How can I connect to Windows XP after I lost the password of account?

    During the change of sign-admin password, I must have typo had am unable to connect to windows. Is there a way to get around this? Original title: lock-out windows

  • How can I unlock my laptop XP?

    My XP laptop froze everything using Apple Safari, iTunes and Quicktime updates. The update ran for a few hours, and then he stopped responding during the update to Quicktime. He could not make normal shutdown with the keyboard is unresponsive, so hol