Color LaserJetPro M177, other: sharing printers of HP network suddenly cannot be installed on the network

Similar Questions

• Windows7 home group sharing printers displays error 0 x 00000001, PC to join the Group House can not see shared printers but can see and share all files between the computers in the home group

  This issue just started about 4 days after years of good impression on the computers in the homegroup.  Nothing I know came to start this problem.

  Printers cannot be seen by the remote PC that needs to connect to printers via homegroup.  Printers, 2, a laser and the other color ink jet, showed both on the remote PC called but also showed "offline", I tried to find ways to put on line, but nothing could fill this function. I read a suggestion that I should remove the printer and then recharge it.  I removed the printer and is where I found that I couldn't see the printer on the network of homegroup to reload.

  I rebooted the bridge and the two PCs and turned off the firewall and virus protection software and closed the Group residential and the recreated homegroup and pretty much any other start-up base and installation process you can think, and nothing gets my functional printers through the remote PC.  I even physically removed one of the printers of the main PC and deleted the software and then reconnected and recharged and have made sure I have the latest drivers and it made no difference at all.

  Hello

  post here for better support:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

• Sharing printers has stopped working for me. MacBook Air "think" printer is not connected.

  Sharing printers has stopped working for me. I have an Epson Stylus Photo R340 connected by USB to my Mac Mini end of 2012, and until recently, my MacBook Air has been able to print to it. Now, he 'thinks' the printer is not connected. Computers are on WiFi. Both computers have an OS X 10.11.5 now and the latest driver of Epson printer. Printer sharing is enabled in preferences, sharing, and "Share this printer on the network" is checked in the preferences, printers and Scanners. I went through the hoops to remove the printer and add it again on the Mini and the MacBook Air.

  Of course, the Mini prints very well via USB. Someone has an idea (that I have not already tried) how to get the sharing of printers to work again?

  Other sharing services work, such as the file and screen sharing?

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• Cannot print from shared printers

  I have 2 computers running vista home premium. I have also 3 2 hp deskjet 930C and 950 c and a x 7170 lexmark printers. A computer can print from all three, the other computer can only print to x 7170 & 930 c... I tried adding the 950c that is not directly connected to the other computer. but I always get error messages. Any help you can give me is appreciated.

  Hello

  1. What is the exact error message you are getting?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

   

  Method 1:

  Follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  Follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• HP Color LaserJet Pro M177: HP Color LaserJet M177 Pro not work small screen

  Dear Sir.

  using this printer can be 1-2 months.

  In the last time I see this little screen does not work, I mean the printer does print, scan but small screen does not.

  But if I reboot printer it works and show me the HP logo, and then when turn on it does not display all...

  Help, please

  Hi @Chumayu,

  Thanks for getting back to me.

  It would seem that something was wrong with the hyperlink.

  Please try either of these links:

  • http://ftp.HP.com/pub/softlib/software13/COL54052/kJ-141652-2/M177_Series_FW_Update-20150228.exe
  • http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Please reply to this message with the results. Good luck!

• Problem with the sharing printers between WIndows & and Windows Xp

  I have a laser printer HP 1150 connected by USB on my computer Windows 7 (Home Premium 64-bit). I want to share with another pc with Xp Pro (SP3), but can not find a suitable printer driver. I read the thread on the sharing of printers and led most of the steps.

  My problem is that, although I can see the printer of the xp machine, it requires a driver. I had already installed the drivers from HP and the printer works fine by direct USB connection on the XP machine, but it appears that I need a driver installed on the W7 machine as well - and I can't seem to find one that works.

  Any ideas what to do?

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=238318&lang=en&cc=au&prodTypeId=18972&prodSeriesId=238316&TaskID=135

  Check HP drivers at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads

  Windows 7 Networking Forum at the link above.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Shared printers do not work

  Original title: printers Win 7

  My shared printers do not work if I restart the computer, I have to reinstall how can I solve this problem

  Hi Donnie,

  1 have had any changes made on the computer before the show?

  2. What is the brand and model of the printer?

  3. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  See the article and try to run the printer Troubleshooter:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You may also refer to article and check if you have shared the printer correctly:

  Share a printer

  http://Windows.Microsoft.com/en-in/Windows7/share-a-printer

  Method 3:

  Refer to the article to find and install the printer in Windows 7 drivers:

  http://Windows.Microsoft.com/en-in/Windows7/find-and-install-printer-drivers

  Let us know if you need more assistance.

• InDesign script for a text of color replace all other lines in a text box

  I have a very long list of names I need to alternate the color CMYK, all other rows value.

  I found this script on another thread to adobe changing the hue of every 3rd line:

  var i, p; for (i=0; i<app.selection[0].paragraphs.length; i++) { p = app.selection[0].lines[i]; if (i%3 === 2) { p.fillTint = 50; } } 

  I tried to change the script to change the value of CMYK, do this:

  var i, p; for (i=0; i<app.selection[0].paragraphs.length; i++) { p = app.selection[0].lines[i]; if (i%2 === 1) { p.colorValue=[0,100,100,0]; } } 

  But using 'colorValue' is not supported. How can I change the script to do all the other lines in a text box to change the value of the color?

  var i, p, color;
  for (i=0; i		   

• I need assistance in the import of certain vectors, watercolor color chart and other creative market (step by step instructions).  Im a newbie to Illustrator and need help.

  I need assistance in the import of certain vectors, watercolor color chart and other creative market (step by step instructions).  Im a newbie to Illustrator and need help.

  Should be the subject of the file > open.  After the download.  The swatches will come with the file.

• How do I avoid the accumulation of color / opacity where two brush strokes overlap?  In other words, I want to use more than one path with the Paintbrush tool, but see no additive effect where strokes overlap.  What Miss me?

  How do I avoid the accumulation of color / opacity where two brush strokes overlap?  In other words, I want to use more than one path with the Paintbrush tool, but see no additive effect where strokes overlap. 5 Lightroom

  I use it all the time. Turn your opacity, density and traffic all 100%.

  Benjamin

• Color LaserjetPro 200 M276nw MFP

  The system is Win 7 Ultimate 64-bit Service pack 1 latest updates applied. Giving software package installed for the MFP and firmware updated to update to the latest version. The device is unable to scan to pc, I ran HP print and scan doctor and the device react but the failure of microsoft (WIA). The driver software has been reinstalled several times but with the same result. The MFP scans on a local USB without problems and print perfectly. Verified that the WIA service and its dependencies are running, they are, tried to start and stop services, but that had no effect, seem to be out of options

  Any ideas?

  Everyone,

  I worked directly with andyw046 here to collect pilot newspapers and get to the root cause of the problem.   It turns out that the driver relies on a temporary folder had been deleted on its systems, causing the driver to fail.   We are uncertain as to how the record has been deleted (it could have been a PC optimization tool any), but none-the-less, it was gone.

  The file in question that was missing was this:

  %WINDIR%\ServiceProfiles\LocalService\AppData\Local\Temp

  (eg. C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp\)

  Specifically, it lacked the part highlighted the path.   We have recreated this file and the driver magically started working again!

  If other people see problems on Windows 7 with newer devices Laserjet does not scan, this could be the source of the problem.

  I will work with maintaining at HP engineering teams to get a check for this in place at HP and Scan Dr. printing and will also work to get the fixed driver check that the path actually exists.

• Why is there not a selector of color (like any other similar tool!)

  It's so, it's embarrassing.

  I am filling the cells in the table selected with a specific color, but under the strokes and fills:

  (a) the choice of colors is limited to 12 colors more none.

  (b) the color that I need is in an image (above), but the only way I can determine its color is using another tool, like Snagit (which has a color picker to determine the values of R G B).

  Am I missing something? Is there another way to find the color values and assign that color of a cell?

  Thank you

  There are probably several ways to address the issue. The "12 colors no more" to which you refer are shades available in the document. Before you can apply the color of a cell through the outline dialog box and funds, you must do a shade of the color. Here's one way:

  Choose the rectangle (or any shape) tools and drag a shape... on the editing table if you wish. Leave it on.

  Select the eyedropper tool and click the color in the image, you must perform a sample (NOTE: If the image is linked rather than embedded, sample that results will be a proxy image RGB color... it sounds like it will be acceptable for your lens). The shape you drew guess color, contour, that is active or its background... is not serious.

  Now choose Add Unnamed colors in the swatches Panel menu. This operation generates a new shade of the color you sampled, which will now be available in the dialog box contours and funds.

  May seem like a lot, but it only takes a few seconds.

• icon comments with other issues of icon and download arrow on this subject, on the Security tab.

  I'm on a laptop computer with dsl internet IE with another computer using the gateway. My os is Vista Home premium and service pack 2. I checked my settings on a regular basis and updated and scanned my system regularly. I periodically check the security settings for all the problems, and they are usually very good. However, I had taken a couple of times in administrator mode, I don't have the rights of security to certain files or programs. When I checked the security labels, I got a message that I could see the settings, but could not make changes. This should not be, as far as I know, because the administrator must have all the rights. I've never seen any icon like this on the Security tab, (or anywhere else) in the past. I went into the security on a folder tab and proceeded to bring up the list of groups and their safety features and found the icon comments soiled by a arrow pointing down. Guests (multiple) icon didn't. I can't bring up anything on this subject. I'm the only person on this computer, and I use the only admin account to do administrative tasks.  I have a personal account, which is a standard user account and both accounts are protected by Word. The guest account has never been activated. The curious to keep in mind another note is that other groups are listed under the name of my pc, but system and comments are not included, for a long time with others who are in the usual list of people or groups. I'm sure that the system must be included, because that always has all the rights. I don't have not find a way to change the icon, or find info for the customer. I searched your site and forums, as well as several other pc and tech support forums and can't find anything close to this issue, save the information on the Chameleon that MSN uses in their toolbar that makes icons from almost anything. Who is listed in my registry under MSN. It seems trivial, but I think it is maybe not so innocent, if it's way in. There are icons from two people on my printer files even if I checked them as not shared. I had checked to share, as well as the share folder normal, to see if anyone is on the network of the group to my computer profile. There was no evidence, however, I thought it would show the other computer on the local network, since the group is the same name. These icons came from. Everyone was listed as entitled to print and edit or delete parameters or printers and print on stations there. I couldn't do that. At most I would not have understood change or delete anything. In the group list, everyone was marked not with my pc name. Local service, I thought I was usually part of the active list is not marked either. System is not marked either. Here is a list of what it says:

  Administrator, administrators, ASPNET user to the debugger, distributed COM users, readers of the event log, the (acc't of the admin), comments, invited, IIS_IUSRS, IIS_WPG, Performance Log users, users of performance, (me), monitor users.

  I'm a little puzzled. Y at - it a simple explanation that I may have missed?

  In Vista, administrators have all the access rights as they did in XP.  NUMBER of cases do not have access.  There are records of point junction where everybody is seen to deny access.  This is intentional to decrease the chance that someone will change, move or delete something, they should not (even administrators).  Some of them can be modified in order to access and others require special modifications of access - which shouldn't be done without a VERY good reason (as told to do so by Microsoft Support).  What you missed is that the permissions have changed in Vista from XP.

  Here is some information on permisions and property in Vista that can help:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  A lot of general system groups are included by inheritance rather than be listed in each file and folder - that's why they are not always there - but they are.  If you select Advanced, you'll see permissions inherited from other folders.

  I have no idea on the arrow on the guest account - I don't know what that means.  It may have something to do with safety or you installed AV programs (I know that Norton did something similar with the files to show if they have been backed up).  Personally I don't use the guest accounts and recommend against them because they are too easy to use to hack the sytem (and other reasons).  I would keep the disabled guest account and delete the duplicates but one off a (in the start menu / control panel / user accounts / manage other users).

  I don't know why you can't see other computers on your local network - that sounds like a network or installation problem connection coming to redo the connection from scratch will fix (and then you can remove the one that isn't working right).  I don't know why your printer changed - rights but you can easily set them back to how they must be with the Security tab in the properties of the printer (and other settings in the start menu / control panel / printers).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I turned the color system so that all screens are in weird colord. Help to find the normal colouring please

  None of the new photos or videos. even in true colors (or n/b just) I want to colouring of back to normal for this screen

  Hello

  1. who is the operating system installed on the computer?

  2. you remember where exactly did you change the color scheme of Windows?

  If you have made changes recently, the best option and the best would be to perform a system restore.

  Method 1:
  

  If you are using Windows Vista or 7, you can see these article to perform the system restore.

  Restore the system to an earlier point before installing this application.

  
  What is the system restore
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

   
   
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2:
  

  If you don't have a recent restore points, you can see these article to change the display color.

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-in/Windows7/getting-the-best-display-on-your-monitor

  Calibrate your screen

  http://Windows.Microsoft.com/en-in/Windows7/calibrate-your-display#section_2

  Hope this information helps.