Color of outline/question

Similar Questions

• HP LaserJet 700 color MFP M775: question of impression

  HP LaserJet 700 color MFP M775 does not print color, only print in grayscale. I printed a page of demo/PQ troubleshooting page and the power state of the printer page, none of these colorful print prints.

  Also have changed all three colour... (Magenta, cyan and yellow) including the transfer kit and image of the hand, still the same... the laser but is mounting kit.

  Any help?

  It's a very strange problem.

  My first regular test for really strange questions would be updated the firmware of the printer.

  There is restrict the color settings in the built-in Web server, but I don't think that had an effect on the PQ test pages.

• CC of Photoshop brush outline question (image)

  I have this strange effect when you use the Brush tool in photoshop CC. When I use the Brush tool, the outline of the brands that makes the Brush tool is much darker than the rest of the color. This could be the cause? The opacity is 100%, the flow is at 100% and normal mode.

  I don't remember the Brush tool never behave like that for me before.

  

  Thanks in advance

  'Wet edge' is ticked in the brush Panel?

  Could you please post a screenshot with the relevant panels visible?

• Having a color changing the question when you copy and paste things into a new document

  Hello, I had a question about copying and pasting in photoshop (something I thought I'd be able to handle).  See the screenshots below:

  First with the move selected tool, I went to command + click on the dark blue model below to highlight and select its layer.  Then, in the following screenshot with the marquee tool, I was trying to copy a square piece of 100 x 100 px of the model.

  

  After hitting the command + c to copy, and then I opened a new document with the following and click settings on ok:

  

  I knocked and then command + v to paste what I had copied the new document that I created.  However, the part gets confused me is that the color of the background pattern that I copied and pasted is now a different color, as shown below:

  

  The glued color is obviously much darker than the original.  Anyone know what is happening here?  Very confused.

  Some how you have copied a composite instead of the layer + styles.

  Try this instead, select the layer as you did

  Create a new document as you did

  Use the move tool and drag the document on the tab of the new document with the mouse still down, drag your document down to the new document.

  Because your new document is set to 100 x 100 is what adapts the layer, so you should be good to go.

  If you still have a question of color or something has not transferred correctly let us know.

• color of plot questions

  I do a program that takes a reading of a DAQ card. My problem is that I don't always want to see all the channels that we use. So I want the ability to disable channel (now using a Boolean true false checkbox on the right) and always see the other plots. I got this far but when I want the colors for the plot do not pass. For example, draw 1 I had green and 2 red. When I unchecked 1 the 2nd line turns green. I want to keep it red... Is this possible.

  Thanks in advance

  Hi Tech!

  Try this.

• Scanning color Photosmart 7520 question

  Hello. I've seen a number of posts in the forums on this printer do not scan in color and have already tried a hard reset and were also in the HP utility.

  The problem is that the printer will not scan in color, either by using the document feeder, or when I manually load pages.

  In the HP utility, I did:

  1. Select printer

  2. Open option "Scan to Computer".

  3. choose 'scan tasks.

  4. double click on the Document

  And that's where it won't.  I don't have an option called "Mode", although I have a menu drop down called "Presets". Nothing in the Presets called color, but there is something called "Photos, graphics, etc. I changed "Last settings used" presets to this photos... option and clicked 'OK' but it does not save it and it's the last settings used when I re - open the window.

  Any ideas on that? I have screenshots of utility windows saved on Pinterest to http://www.pinterest.com/pin/338473728219048646/ and http://www.pinterest.com/pin/338473728219048648/

  New impressive toufik

  I'm glad to hear that the problem is now solved! Thanks for letting me know that you had tried for the troubleshooting steps. Please consider tagging a post here by clicking on the button "Accept as Solution", so others in the community can find our thread too!

  Have a great weekend ahead

• Color grading workflow question

  Lets say I want to color grade my Final Cut project, should I rank each RAW has clips individually then FCP edit? If you rank each RAW file would not take too much time since I use only a part of the raw clip? or do I have to import this project FCP together, under the leadership, to the rank of sequels? How you color grade each individual clip when after effects recognize your Assembly as a single item?

  Traditionally, the color adjustment is the last step of a project before final delivery.

  The reasons: any other way to train a lot useless AE make time and disk space excessive to store redundant images.

  It IS possible to do as you wish.

  Just make sure you have 1) time and 2) storage to your workflow preferences.

• Profile of color in InDesign question

  I created a shade using a Pantone color:

  

  But in the color Panel, it appears as a color lab:

  

  And when I have the mouse on the swatch in the swatches Panel, I see these values in the floating yellow box above the sample that appears on mouseover.

  The ink Manager is not to use the lab for task values:

  

  Why InDesign converts the tones of colors lab? In addition, fusion of transparent space is set to CMYK (if it's relevant).

  CS6 8.0.1 on Mac OSX 10.8.4 ID

  Any help would be great.

  Best thing is to try it. Open the PDF in Acrobat and open the output Preview Panel. Your Pantone (s) will be listed if it is present at the bottom of the list.

  Take care, Mike

• Color/flightcheck newbie question

  I am preparing a 24-page newspaper which is black and white, with the exception of the stain color on pages 1, 24 and 12-13. When I have my final paper flightcheck, is it possible to see if I screwed up and used the color on the pages without color?

  Define a preflight profile that reports it as a black everything except error. You should not get any errors except on pages where you know that the color is OK.

  Your newspaper really print shades? Very few do these days, although they could still call a CMYK mix red spot or blue spot.

• Question on color background with other objects

  I'm new to this forum and I am very new to illustrator program. I realize that this may be a basic question and stupid it is obvious to most everyone else here but put into perspective my skills. I am doing a project for my base class of graphic design in my community college and I do could be done better by someone in the kindergarten. He looks terrible.

  in any case, I tried to set the background color to a 8.5 x 11 in. project and I know that I can add the background color with a rectangle on the entire space and fill it with a color. My question is how can you put other objects from the background of different color on top a blue (or any color besides)? For example, I put a black circle on the top blue background but it disappears behind the blue, so you can't see the circle. I tried to reduce the opacity of the background blue, but it doesn't look good. I want to be 100% opacity blue. I just need to know how to put things on top of the background color. I'm using CS5 passing.

  Any help would be appreciated. Thank you.

  You have the mode draw behind? If so, change it at the bottom of the tool palette, or press SHIFT D.

• Invert the colors in the layer text and background

  Hello

  Can someone please guide me through do reverse my position.

  Basically, I created an outline of buildings in the background using the pen tool - this part is fine. Then I had filled white buildings inside and outside with black.

  Then I have the text layer. Now, I want to have the text overlapping the two portions of the black and white of the background while being in the Middle, and the problem I am facing is I'm trying to make sense of the texts that overlaps the black area to be white and black when he rides the white area.

  So just a summary:

  Question #1: How can I go to do this inversion of color?

  Question #2: Just another question - is there a better way to create sharp backgrounds? I basically used the pen tool to create rectangular shapes, a little inclined to the buildings in the background - the area selected and filled with the foreground color, which, in my case, I chose white. I left at 0 Pixels and checked anti-aliasing when I chose the area by the way. I'll get this pattern printed on a black shirt, then I want the lines to be as sharp as possible, if someone can you please advise me if I don't do something right in the above. Kindly let me know if there are better ways to do it as well.

  I thank you all in advance and have a nice day!

  Javier

  Type white and use the Exclusion blend mode.

  

• Color change of contour half way

  Hey guys!

  Quick question, if I wanted to change a color contour (outline) objects for only a part of the object, which would be the best way to go about it. Pro Tip: in photoshop paint bucket tool! = the best way... it becomes all pixely.

  Use a temporary path from time to time where color breaks should occur. Then use the live paint tool to apply different colors:

  

  JET

• Graph legend silver color problem (Bug?)

  Must be the end of the week...

  I can't seem to find a way back to the original color of the chart legend money once I have it painted a different color (Figure 2 below, painted 'System'):

  

  I used the for the main body color picker and the original legend of the chart (they are the same, apparently), but when I use this color choice, no question when I apply it (corner, Center, etc.), I get the weird result shown in Figure 3). What gives?

  I have no problem with modern graphics:

  

  I enclose the offending VI and the non-offending someone confirm (or not).

  I'm sure there is a way, it seems just too stupid to understand.

  I would say that you do not teach an old horse like me to paint a chart legend differently that it has been used forever...

  This is of course all the stuff of LV 2011.

  I agree it's a bug and it will drop as such, but I also want to explain what is happening.

  Money controls have the background of the text transparent plot value so that you can see the gradient of silver decoration behind it.

  When you colour legend, it changes the colors of foreground and background on the text of the plot, as well as on the framework. How works the silver decoration, these two colours are the endpoints of the gradient, you receive the darker color as the background of the plot.

  I have this set probably by having the paint bucket tool let the background as transparent.

  To establish a chart with this problem, you can use the control editor. By choosing 'Customize' mode, you can select the text of the plot and choose Edition > control to customize to open in another editor to control where you can color.

• wire color

  Hello, just one question, maybe someone can give me an idea about "best practices".

  Often, in a larger project, I need to use the notifiers, queues, DynamicUserEvent structures. Usually, we go data of cluster through these threads, for communication, data broadcasting, etc...

  What I really hate is that since I use the cluster data, all the threads above has the same color. In a larger project, even if I try to make things as simple as possible, it is very hard to follow which wire is the author of the notification, queue, etc., because they have the same color.

  Question: I understand that, if specify us a data type for an ObtainNotifier VI (or queue, dynamicevent, etc.), the reference wire Gets the color of this type of data. But in my opinion, it would be better to show a difference between the sons of different reference... color, or perhaps shaped?

  Is there a work around to get a more visible block diagram?

  It is not a direct solution to your specific problem. But if you start using LVOOP you the ability to customize the colors of son.

• Best color in Photoshop settings to print on Photosmart B8500

  What are the best color settings to use in Photoshop in order to allow the release of color more specific?

  (1) should be in RGB or CMYK mode in Photoshop?

  (2) the following standard settings that work best with this printer:

  North American universal 2

  America prepress 2

  Workflow of ColorSync

  The color is a question that has no 1 correct answer.  It is a matter of personal preference.  These preferences are often influenced by the choice of papers, ambient light, the perception of color in the eyes of viewers, view settings and the intentions of rendering, to name a few...

  I use sRGB, most of the time, at least that I print to a printer that uses custom color profiles and use any other color profile, I created for a particular media I use.

  My suggestion to you is to print by using different settings and that the label of each print with your selections.  Go back and see each print and decide which fits your style the best.