Color question

Similar Questions

• CW3D chart fill color question

  Hello

  When I use CW3DGraphLib_CWPlot3DSetFillColor on a lot that I created in the IUR, everything is OK apart that the value of blue is actually red and vice versa with the red color value.

  When I add a new path using CW3DGraphLib_CWPlots3DAdd and then change color with CW3DGraphLib_CWPlot3DSetFillColor the color displayed is not the same when I put the same color value to the plot that I created in the IUR.

  Worse still, it is not possible to set the color in white or black. RED, GREEN and BLUE have the same value, the result is always gray.

  What I did wrong?

  Please find attached a test program that demonstrates this behavior.

  Bertrand

  Hi Bertrand,.

  I found the other setting, you need to change to get the fill colors to look right.  When you create a new path, the new path takes the properties of the PlotTemplate object.  In this case, the default PlotTemplate object has the property ColorMapStyle the value "1 - cwShaded" by default.  If you change this "0 - cwNone ', the behavior will be the same as your other parcel of land.  Please let me know if you have any questions!

  

  NickB

  National Instruments

• print in color questions after changing cartridges

  My Deskjet 1000 J110 printer do not print in color, after that I replaced the cartridges with original HP cartridges.

  It prints black, but no color. I tried 2 HP 61/color cartridges, so far, but without success in everything except black.  I also made several attempts to "ask a question", only to have the search engine telling me "no one else has asked your question. I also spent a lot of time reading threads in the hope to come across a solution, but without success.  Can you help me, please?  I use the printer on a HP Pavillion G6 series laptop that I just bought the last sale online from HP, less than 4 months... The OS is Windows 7 Home Premium Service Pack 1.

  In this page troubleshooting steps can help solve the problem.  The diagnosis in Solution 6 page shows the color?  If so, the question is probably in the driver or its settings.

  If the color does not print in the diagnosis page then the document here may help.

• Develop module, 1:1 and export don't look the same, color questions

  Hello world

  I use the latest version of Lightroom (3.6 if I'm not mistaken) and I am facing a problem very uncomfortable with the develop module.

  I adjusted with precision each luminance of the color and saturation, so it looks pretty good in the preview to develop (made to fit) and did an export...

  The preview that I worked on and export just don't look the same.

  I work with files my DSLR digital D3100 from NIKON on an OSX Mac NAVE 10.7 MBP.

  This may be the external display profile is not properly adjusted because I looked at all the images on the same screen.

  I unchecked all boxes from the preset in the settings window tab.

  Here are some screenshots and exports.

  Good look in the module development (left) and the actual export of the same photo (right)

  

  Please note that I have not activated an option for correction of lens and adjusted any color. This is the RAW file and its direct export.

  Screenshot of the preview window on the noise correction options (left) and the same area once as I zoomed in the main view (right)

  

  I hope this can be fixed or I'm doing something wrong.

  A few days before today I used Camera RAW of PS CS5 to correct my NAVE and maintaining only to exports to JPEG. I decided to use LR 3 on my entire workflow and I'm skeptical...

  Ah yes and please forget all mystake alone in my post, I'm a french student.

  Thank you!

  EDIT: I can meet any required file or the screenshot if necessary. I have a few other photos with the same problem (lots of those indeed...)

  EDIT 2: I found the image has made many more colors acurate (relative to export ones) in the library preview module (magnifying glass I guess)

  The previews in the library are are on JPEGs in a smaller color space.

  adobeRGB. Not in prophotoRGB, which is space (with linear gamma, but which)

  is a detail) used to develop. To make the point, you see the more accurate color

  in general, but you must be aware that not all destinations can actually

  reproduce these colors. There is also still the color noise reduction

  question, you can only see to develop at the 1:1. In the library, because it is

  made a jpeg file, the color noise reduction is applied at each zoom

  level images etc. like this, which tends to desaturate the colors. My guess

  is that this is probably a problem of range. You can check receives in

  Photoshop for adobeRGB profile. The orange on the trees is probably

  always out of gamut.

  That said, how do you calibrate? You should use a Spyder, Huey Pro,

  i1Display, Colormunki or similar to calibrate the screen if you want to

  believe what you see.

• Task of coloring / questions preview overprinting

  Hello all, I have this project t-shirts I work what was supposed to be transformed spot to be silkscreened on t-shirts.  I'm still fairly new to Illustrator and really know nothing about printing, so I need help. the image is CMYK, a lot of oranges/reds/Browns for an association local firemans.  I've already found how to change the colors > Recolor with preset > selected pantone coated colors solid and played with all the colors to get as close to the original as I could.  It started as 26 colors and I got up to 6 tones with success.  I am satisfied with the way it looks on the stage.  Now I come to a few questions... in the "Separations Preview" Panel, I have hidden from view of all CMYK channels and left visible 6 all pantone colors.  Image looks like much.  But when I check the box 'overview of overprinting', the image turns to crap... why? Now, I tried to research exactly what the "overprint Preview" means, and from my limited knowledge, I understand that it is in the sense of transparency that the layers of ink to print.  If someone has an easier explanation, feel free to explain.  So I guess my questions are, why is there such a big difference with the overprint preview? If I send the image to get prints, which will be printed, the bad or the good version overprint preview version? and finally, if I continue to edit the original and keep control of the overprint Preview until it looks good, what is the best way to do it without a blind guess and check? Thanks in advance, after I spent time playing with all colors until he waits just to the right, that my heart sank after that I clicked on the overprint preview...

  Justin

  I really like how the "overprint Preview" looks now so hopefully that's not spoil anything.

  Overview of overprinting is just a display setting. It won't spoil anything, but in a screen printing environment, your misunderstanding of it certainly will.

  Overview of overprinting is trying to simulate on-screen the printed results of overprinting fills and lines assuming that translucent CMYK process inks. It does not simulate the results of overprinting of the opaque , like those commonly used in four-color silkscreen inks.

  Example: It is a common practice in screen printing for:

  1. print a solid black ink,

  2. "flash" (partially dry) it.

  3-overprint a lighter solid color.

  For example, imagine a picture of a dinosaur printed on a black T-shirt. The body of the dino is printed in dark green ink. The leathery texture to hide the Dino is rendered by printing an average green ink on top of the dark. A lighter yet (greenish yellow) ink is printed on top of that, for highlights.

  That kind of accumulation is more akin to painting on a canvas with opaque paints (oil or acrylic) what whether associated to CMYK process in advertising offset press room. Overview of the feature has no Illustrator overprint simulate. In this image, preview overprinting of the Illustrator inks overlapping areas would be displayed as more and more darker, not lighter.

  So you deceive yourself with results potentially job-demolition if you rely on overview of the overlay as an indication of what the printed results will look like in a screen printing environment. Then, turn the power off. Learn what overprint means in fact regarding the separation plates.

  Above is of the major reasons why many stores print screen use Photoshop to build up their work. Multi-Sondage-channel Photoshop files can properly simulate real results of overprinting of opaque inks, because the interface allows you to set the opacity of the inksis expected.

  At design time, do not think that "color". Think inks.

  JET

• Sansa clip color question

  Homepage of the sansa 4 GB Sansa clip sold only color is silver.

  At our store, I found Sansa clip 4 GB Black color.

  Is - it could be something suspisios and not of origin or there is no difference between the 2 colors.

  Money was the only color for the concert of 4 for a while.    Now, they offer a black version of 4 GB.   also a new 8gig black.     Black is better ^_^ because it's the color I bought ^_^

• HP Photosmart C7283 red color question

  Hello

  I use HP Photosmart C7283 all-in-one and do not print my red color (Light Magenta and Magenta).

  I tried to change ink including original usig and it seems that the problem is not with ink.

  I also printed a report of the printer itself that does not print these colours means that the problem is in the printer and whitin not the driver of the pc.

  any help, please...

  TNX

  I would say that you have a serious print quality problem. This problem is caused by a faulty cartridge or print head has failed. I would like to start by trying the procedure described in the document below. If this does not work, try to do a hard reset. If it still does not work, try to do a partial reset. If the problem persists, replace the cartridge that is causing the problem. If it still does not after all this, the print head is probably bad, in which case you will need to replace the printer.

  http://goo.GL/1kSmu

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

  To make a partial reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5 connect the power supply cord inot the wall, but do not connect the printer.
  6. press 3 and # buttons.
  7. while now buttons, plug in the printer.
  8. when the lights come on, release the buttons.

• Form of InDesign, exported as interactive, frame color question

  On Mac OS 10.11.16, Indesign CC (11.3.0.34)

  I have a form that I can't see the 'look' of so I'm stuck with the way things are. This means that some fields of the form are created from a graphic image with a border of 1 point, while others are from the combination of a static graphic image with border by 1 point and a white (no background or outline) form field placed above them.

  Exactly the same color is used for each graphic frame with the 1 point rule. Only difference is that an image is static and the other is an editable text field. No effect, no overprint.

  The fields look substantially different in Acrobat.

  Any ideas?

  Screenshot below - I know there is a fairly subtle difference, but it's very annoying.

  

  With PDF files interactive all the color gets converted to sRGB. Except if your document must also get exported for printing, assign sRGB as the InDesign doc RGB profile (Edit > assign profile...) and use a RGB color for the race.

  Also when you view the PDF in Reader or AcrobatPro, RGB color can be viewed in CMYK output according to your preferences. In the drive or AcrobatPro make sure your Page Preview of the overlay view is set to auto or never. Or AcrobatPro you canset the output preview > Simulation profile to sRGB. If you view the PDF file in a browser to date, you should always see sRGB and not a CMYK simulation.

• Drop Shodow and color question corner radius

  Displays the first time and many beginners in Dreamweaver, html and css.

  • I use the CSS code to add shadow to certain cells on a table, but I think that other cells then it shadows appear as if they are above layers.

  • Small corner radius, I added to the box at the bottom, but the color is black instead of the #EDEDED I would like to

  Any suggestion on how to solve these problems if you please, I'm using CC5.5 on Mac
  

  Oh, I didn't know it was an e-mail.  In this case, use arrays.

  HTML messages are different web pages because many e-mail clients don't fully support CSS.  Therefore, keep it very simple.  The best approach is to start with a proven e-mail template.

  Email HTML Templates | Campaign Monitor

  Nancy O.

• Photoshop color questions

  Hi, I have designed an image in Photoshop CS5 & upgraded to Photoshop CC2015, my colors now seems to change.

  Black White & also, there seems to be some white dots on the surface.

  Can someone help me as to why this is happening.

  Thank you.

  

  

  I don't know how old is your Mac, but it is usually a GPU problem. 2015 CC tax the Gpu more than CS5.

  First of all, if you have OSX 10.10.4, 10.10.5 came out.

  So to update and see if it goes away.

  If it is not the case, go in your Adobe Camera Raw settings and at the bottom, uncheck "use GPU.

  If the problem is still there, go to Preferences > Performance < use="" graphics="" processor=""> advanced. Set the Basic Design Mode and see if that fixes it.

  Gene

• The plans of work and the canvas color questions

  Downloaded the 2015 version of Photoshop and the problems with the color of the cloth and work plans. Work plans are displayed on a white background. I tried to change the color of the canvas by a right click and also through preferences > Interfaces but nothing has changed. Can someone advise?

  The preferred mode for work plans is:

  (1) preferences > performance > use the graphics processor = WE

  (2) the preferences > performance > avancΘs > draw = Advanced Mode

  (3) the RGB documents

  Other adjustments can result in a degraded experience. Work plans still work, but they can rate a part of the 'Visual' sugar

• On the main screen color questions

  Hello

  So I use the X201T with very bright display on Win7 64.  From time to time display on my screen color seems to be very off, almost as if the gamma have been shifted too far.  All graphics settings seem fine, yet the only solution seems to be a reboot.  Initially, I noticed the problem seems to occur more often when waking from sleep, but this is no longer the case.  Took me to update to the latest version of the bios and video drivers, but always without success.

  Today, I noticed something interesting on the problem.  When I have an external display connected, the colors on the outside are very good if I cloned the original display or extended desktop.  However, what I've learned today, is that when the issue is raised, it is connected permanently to the main screen only - which means that if I have my external screen defined as my main screen, there only color problems while my laptop display looks great.

  I don't know if this could be a hardware problem, a bios problem, a driver problem or a graphic properties issues intel.  Any help would be greatly appreciated .

  Thank you

  Just a quick update incase somebody stumbles on this thread:

  The problem seems to be the lenovo display driver.  Although I tried to install the display driver intel in the past, the only solution was a clean Windows 7, followed by the installation of the driver setup intel only.

  Note that in my first own installation, I opted for the display of lenovo driver and still had persistent problems of color.  On my second try, I went straight for the intel driver and do not know the problem any longer.

• Alexa in After Effects color questions

  Hello, I work with DPX files in After Effects CS6 (Mountain Lion) which are located in the color space of Alexa Log C without intermediate color grading or direct treatment of Technicolor.  My problem is the following: I am trying to correct the color files DPX to match Avid DNxHD quicktimes reference class color that were genereted from the same files to DPX using a LUT and a CDL.  In the past, that I never did NOT match perfectly using LEVELS by adjusting the color in each layer of color individually while comparing it to the color clip, I am corresponding to.  Not only it is impossible to match the DPXs made from the raw images Alexa to a color version of this clip which is corrected DNxHD quicktime format, but I find the red channel in the DPX files behave in ways that are unlike anything I've ever worked with before.  I did extensive research regarding this issue without success.  Technicolor provided a LUT for NUKE and SHAKE that, as well as a CDL, is supposed to recreate the color of the quicktimes grade.  I used free Colorista enter the CDL values, but also the READ buddy to incorporate the LUT that was given to me with no luck.  Compensation with levels does not work because the red channel will NOT cooperate.  I also used the utility LUT in After Effects, with the same results.  I even contacted the person in charge of such things at Technicolor and they admitted that they gave up on After Effects with regard to a solution of color corresponding to sequences of Alexa that has been converted to Avid DNxHD and baked with a LUT and CDL.  I can't be the first person to be executed on this issue and that it SHOULD be a solution that doesn't involve switching to Nuke.  Anyone?

  
  

  See this for more information on using the ARRI Alexa film colors in After Effects:

  After Effects and Alexa - part 1 by ChrisZwar

• Pantone color question

  Hi, could someone help me with this please?  My printer wants me to pass the text I used in Illustrator to Pantone.  I use Illustrator 10 and am wondering how I would go about the passage of the police of CMYK to PMS.  Any help would be greatly appreciated.

  Thank you.

  hrggroup,

  Assuming you have outline of direct Type, you can:

  (1) select the Type, and then click the color box at the bottom (left); should display you the current value of CMYK of the Type (filling) in the color palette;

  2) click window > libraries of shades > PANTONE according to what is relevant (you may need to ask the printer, which choose (perhaps lying/non-couche solid)); This should open the relevant game from the PANTONE color chart.

  3) click on the desired shade. This should now display in the color palette.

  This should change the color of the Type as you wish.

• Creation of rounded Rectangle outline color question

  Hi all

  I am wanting to create a rounded rectangle with an outline or a boarder with a black color (or other colors). But I can't find where I'm able to add a stroke optional color before drawing, form or after the design of the shape.

  The only option that I am able to change the background color of the created shape, and I was wondering if you are able to add a preview when creating, or after you have created a rounded rectangles or other shapes...

  Thank you

  James

  But I can't find where I'm able to add a stroke optional color before drawing, form or after the design of the shape.

  Styles-> stroke.