color unique plot for all parcels in a multiplot screen?
Hello
I'm plotting say 100 pitches in a multiplot view. Is there a way to trace all of this in a single color?
Currently, I draw all and then go and change the color of each. The problem with this is that sometimes, the color change does not occur quite fast and a range of colors are visible on the tracks before all traces settle on the unique color.
Thank you
As long as you know the maximum number of locations, you may have, you should be able to set up the colors for all the plots in advance. You can do it manually, but if there is a large number of plots, you probably still want to make the configuration programmatically. To start, you init the number of plots in the graph or table. otherwise, the number of sites is defined by the data. To do this, view the legend of the plot. For a large number of plots, right click on the legend of the plot and select the index control so that you can manipulate it as an array. You can put the index advance to '99' and click the init table command plot with 100 items. Now you can set the color for all 100 locations programmatically. Once installation is complete you can copy the control to another VI and/or save the VI / control with all the properties that they are, so you won't have to do during every execution of the actual program.
Tags: NI Software
Similar Questions
-
Adjustment layer - unique icon for all.
Hello
Recently all the icons in my adjustment layers show the same thing, what is the 'Add adjustment layer button '. I always get the curves, filter photo adjustments etc. - it's just that the same remanins icon. Why is this fact.
Thank you very much.
Ah! Ok.
It's normal. It was not not clear in your message that you were talking about the icons in the layers panel.
The icon changes depending on the form of the document, if you have an image with a larger than 2 x 3 report, it'll be ok.
You can change the size of the tumbnails in the layers panel menu, and by selecting "Control Panel Options."... "and the adjustment layer icon will be different.
In the future, please give the full Photoshop and your operating system version, 14.2 CC instead of CC or CS6 13.1.3 instead of CS6, you can find this info in help > system info...
-
What is the "catch-all for all its imperfections" equivalent in failure-strategy. XML
Hello
It is in this case the tag equivalent catchAll fault - strategie.xml file
fault - strategie.xml has two sections - Conditions & Actions
In Conditions, you set several < name faultName = "XXX" > and corresponding < condition >, < test > & < Ref action = "" >.
But is that what I want, how do you define a condition for all types of failures (something like a catchAll activity)?
Lets say I need a unique condition for all its imperfections, so I want to say
conditions of <>
< name faultName = * "ALL_FAULT_TYPES" * >
< condition >
<! - < test > - I do not give any condition of test here, so that it applies for all conditions for this type of error-->
< Ref action 'ora-human-intervention' = >
< / condition >
< / faultName >
< / conditions >
I searched documentation, articles, but found none.
Only thing I could find is, if we do not give any what < test > tag, which means he's like a catchall for this particular faultName. I need a similar one, defects but for all.
Receive your answer.
Concerning
RaviKiran.
Published by: kiransaravi on October 16, 2012 12:39 AM
Published by: kiransaravi on October 16, 2012 12:40 AMHi RaviKiran,
Somewhat similar is the following policy of fault:
... to specify the action...
... remains...
Basically, you set specific conditions, which means that all defects that are captured by the framework of fault policy fall into this condition.
Spirit: fault-framework surprises flaws in services (external) BPEL, mediator calls, etc. BPEL internal failures such as erroneous assign activities are not taken.
Best regards, Ronald
-
How to permanently change the font for all emails color
How can I change the color of the font for all my emails constantly?
E-mail address is removed from the privacy *.Hello Msmouser,
What mail client do you use?If you use Outlook, I suggest to look at this article:If you use your web mail from Verizon, I would say that to visit the Verizon Mail support page:If you use Windows Live Mail, please visit: -
Watch a video on the net, then all of a sudden my screen goes to a cartoon looking for colors
Original title: Ive downloaded updates for display adapter igp340m a cant figure how to upgrade... my prob is im watching a video on the net, and then all of a sudden my screen goes to a cartoon looking for colors...
E-mail address is removed from the privacy *.
Hi Russell,
The problem you are having with the video playback online may also be due to flash player or JAVA installed on your computer.
Install the latest version of flash player and JAVA on your computer and check if it helps.You can install the latest version of flash player and JAVA from the following link:http://get.adobe.com/flashplayer/
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Java-in-Internet-Explorer
You can follow the steps in the link below to install the updates for the drivers: the problems of device driver: http://www.microsoft.com/windowsxp/using/setup/support/driver.mspx
How to manage devices in Windows XP:http://support.microsoft.com/kb/283658
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Menus... I need to know how to set colors, etc. for all menu items
When I add a new page, it has the widget original colors etc. must manually change EACH. What a PAIN. What is the magic combination of mouse clicks and chance selects all THE menu items and submenus at the SAME TIME.
I did click to down/zoom before thing. Am but so far failed to put for ALL States and the elements of the FUTURE.
Paul
Holy Moly.
-
How to create a validation "not null" unique for all elements in a page?
Hello world
How to create a validation "not null" unique for all elements in a page? I love textfields. Rather than create "not null" validation for each article, I would like to create a single validation control that will be used
Thanks and greetings
UmerNice1 wrote:
Bob, like u said I did the following:(1) less to create a button, there are 9 elements, and for each item, I put in the light of 'yes '.
(2) under the button Delete, there is 1 point and have in light of the 'Yes' for the item
(3) validation of the page defined for the 9 items under 'create a button' and put it to fire when 'create' button clicked
(4) the page validation set for 1 number under 'remove' button and put it on fire when "delete" button clickednow, when I click on the 'create' button it shows same for the item under the "Delete" button that's a required element
Sorry, I do not see this note. The required model will not work, there is no way to attach it to the button.
The best solution is that the answer only a few answers to the top
Create 2 validations page type as a PL/SQL with code
1st validation :P1_ITEM1 IS NOT NULL and :P1_ITEM2 IS NOT NULL ...... and :P1_ITEM9 IS NOT NULL include all 9 items Set the When Button Pressed to the CREATE button 2nd validation :P1_ITEM10 IS NOT NULL Set the When Button Pressed to the DELETE button
I think that this will be the best way to do it.
Published by: Bob37 on April 27, 2012 12:02
-
change the color for all the fileds element
Hi all
can someone guide me that how to change color for all fields after pressing F7? If its possible then guide me please
SarahHi again!
Try and smile:procedure set_blockitems_va ( p_block in varchar2, p_va in varchar2 ) is l_item varchar2(61); begin if p_block is null OR id_null ( find_block ( p_block ) ) OR p_va is null OR id_null ( find_va ( p_va ) ) then message ( 'Procedure Set-block-items-va is called with illegal attributes.' ); message ( ' ' ); return; end if; l_item := p_block || '.' || get_block_property ( p_block, first_item ); loop if get_item_property ( l_item, item_type ) in ( 'TEXT ITEM', 'LIST', 'RADIO GROUP', 'CHECKBOX' ) then if get_item_property ( l_item, displayed ) = 'TRUE' then set_item_property ( l_item, visual_attribute, p_va ); end if; end if; exit when l_item = p_block || '.' || get_block_property ( p_block, last_item ); l_item := p_block || '.' || get_item_property ( l_item, nextitem ); end loop; end;
Call it like:
set_blockitems_va ( :system.trigger_block, 'your_visual_attribute' );
Concerning
-
You can install an email template, similar to the HTML design for all emails?
Is there a way of setting Thunderbird that you can install a HTML e-mail template, or you can customize an e-mail so that it has the appearance of refined HTML. I don't know, maybe I should tell of stationery, but I want the template e-mail and signature to be incorporated 1/document format. Mozilla offers all type of creator of email that would allow me to drag and drop, without knowing HTML code? I just need a way to start over.
Finally, I am the CEO of a not-for-profit organization and have desperately need a good person paid in graphic design to implement all these things for me. I also need a new logo, letterhead, business cards, other various printed products paper and possibly a few Web site design/redesign.
Because of the urgency of this issue, you can email me directly, Erik, to [email protected]. I am registered with the IRS in non-profit institutions legitimate 501 c 3 and could offer you compensation giving you a tax writing for all of your services.
I'm also in desperate need of a grant writer/applicant.
Thank you and have a great week.
Erik
You can easily create your own email template.
You must have HTML enabled composition.
Different methods of location of the 'account settings ':- Via the toolbar "Menu Bar":
- "Tools" > "Account settings" > "Composition & addressing" for the e-mail account
Through the pane of folders:
- Right-click on the name of the e-mail account in the folders pane, and then select "settings".
- then select "Composition & addressing" for the e-mail account
Via "Menu Icon.
- Menu icon > Options > account settings > "Composition & addressing" for the e-mail account
"Select compose messages in HTML format"
Click OKThen, open a new message 'write '.
You should see the "formatting Bar" below "subject" and above the area of publication.
"Formatting" bar you different heading colors, the fonts, the fonts and the background, bold, insert images, tables, links etc.
You can use a 'Table' to help organize the place where you position points.
The options "insert" and "format" in the "Menu" also offer options for formatting, for example: Format > properties of the table cell.After dialing the e-mail:
Give it should be "subject", so that you can easily locate this model - note you can always change it before sending more later if necessary.
Save e-mail as a 'Template '.If you have not registered an email as a model before, Thunderbird will create a folder of templates for your emails. If you use make IMAP, of course you have to see the Templates folder.
To use no matter what email stored in the Templates folder.
Select the Templates folder
the "Subject" column to identify the correct model email.
Double click to open
"or click on send and select ' change as new message."enamel model opens in a new window to write message.
You can select the people to send, change the subject if necessary, add a few comments etc and then send email.
The original e-mail from the model can be reused again and again.There are a few extensions add-on that can be installed to help the creation and the use of models.
StationerySmart Template4 working with stationery
How to install the addon:
Download the addon as extension to your desktop or downloads folder.
In Thunderbird
Tools > Addons
or
Menu icon > AddonsClick the gear icon and select "install the addon from file".
Locate the downloaded xpi file and click Open
You may have to restart Thunderbird. -
I'm trying to deploy Firefox on my personal work machines.
We use Windows 7 on them and want to be able to have available extensions for all users on this computer.
However, after much research, it seems that all previous to this problem solutions have been limited or removed.
There should be an easy way to have addOns installed for all users. It is not feasible to make each single user install each single addOn one by one.
So while the links were good and everything worked, but I thought that it would take an easy source of step by step to get an addon to work for all users of a "dumbed down" version As a result I got an addOn to work for all users, there may be shortcuts here and there, but it worked for me.
So here it is:
1. first you need to download the '. '. XPI file"of the addOn. This is done by downloading using another browser (Internet explorer).
2. Once downloaded, you must extract the contents of the "." XPI file"in a folder. I used WinZip to do this.
3. go to the extracted files and you should see a file called 'install.rdf '. Open this file with WordPad.
4 in this file is a Unique ID, specific to the addOn. It is normally at the top of the file. You can search the
<Description about="urn:mozilla:install-manifest">
and the next line after that it should be your ID in the form of:
{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
for example.
5. with the help of this Unique ID, you must create a folder in the install directory of Mozilla Firefox called 'distribution' and a subfolder in that called "extensions" and a subfolder using the name of your Unique code.
Example:C:\Program Files (x86)\Mozilla Firefox\distribution\extensions\{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
In this case, you should empty your extracted contents of the "." XPI file.
6. you must now tell Mozilla to look in these folders. To do this, you need to change the global preferences. This is done by going to:
C:\Program Files (x86)\Mozilla Firefox\defaults\pref
In this case, you should have 2 files:
channel-prefs.js user.js
If they do not exist, create them if you please.
Inside of "channel - prefs.js" you need to put the following at the end of the file:
pref("app.update.channel", "release"); pref("extensions.enabledScopes", "0"); user_pref("extensions.autoDisableScopes", 0);
Inside the "user.js" you must put the following at the end of the file:
user_pref("extensions.shownSelectionUI", true); user_pref("extensions.autoDisableScopes", 0);
7, you're done! Your addOn should be activated automatically as soon as the user starts Firefox.
-
Unique strategy for Apple in India
I am pleased that you considered my questions.
I asked the disadvantages of apple products in India with regard to the cost, technology, promotion and made social.
u replied that the problems are in my perceptions.
I asked this question because of the difficulties encountered by the Indians when they think of apple products.
I think that there is no offence in my questions.
What is the unique strategy for apple in India?
According to the news, I've come to know apple only spirit development in India is all about volume.
If balancing the pressure of volume for growth is effective in India?
I have these questions in order to clear misunderstandings of my very own perceptions.
Please consider my questions.
waiting for your valuable response.
It is simply not the appropriate place for questions to Apple on marketing strategies. It is a forum for technical support to users. Almost no one post here works for Apple. The people who post here who work for Apple are not in the Marketing Department.
Use the link contact us at the bottom right of each page for more information about how to contact Apple.
-
Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site since the update to version 3.6 to 4 RC1.
Gel mouse pointer when it comes across objects that use some sort of animation or gradual highlighting when hovering on (which is basically all the Firefox 4 items menu, tabs, etc.) But also a lot of things on the Web pages as the green buttons on this page that change color when you hover over them).
After rebooting my system, however, the problem seems to have disappeared!
[, WinXP SP3 - 4 GB RAM, Core i5 M520, driver Nvidia NVS3100M 6.14.12.5738, Firefox 4.0]
-
Chart stacked with cursors that extends to all parcels
I use LabView 2009 9.0f3 (32-bit)... I want to create a chart stacked with two sliders that extends to all plots. I can only find the graphic stacked option but not graphic, and I don't know how to create cursors that spans all of the plots. Attach a picture that my college created showing what I want to achieve.
Thank you
You can create a table of locations (remember to group, place them in a cluster first!).
Because the properties are identical to the elements of the array, the positions of the cursor will be the same for all the graphs, whichever one you are moving.
-
BlackBerry Smartphones Album artwork are the same for all the songs
I have a bb bold 9780. I recently added a folder to the top 40 uk... and I guess that each song has its own pocket... but in my case, my bb is showing a cover of a song from this record to all the songs... even when I download songs of songlover.pk every song has its own cover art, but it will show a unique work for many songs downloaded from this site... I noticed that it is caused due to the name of the folder, for example. A folder named "single" has 2-3 songs will show an illustration of common album... Please help me...
Hey parampramit,
Welcome to the community of BlackBerry Support Forums.
Thanks for the question.
We are aware of this problem, this problem is solved by using BlackBerry Device Software 7.0. However, this version of the software is not available for the BlackBerry Bold 9780 smartphone.
In the meantime, follow these steps and test the cover of the album:
- In iTunes or Windows Media Player, select this option to change the albums
- Enter the correct Album for each album artist
- Transfer the songs to your BlackBerry smartphone.
Let me know if you have any other questions.
See you soon.
-
How can I search in Windows 7 for all files not containing a speific (_) character in the file?
I have two files with about 50 000 files in each folder. There are many copies of the same file (only one folder contains photos, the other file has data files. In the two files copies have the same name as the original file, for example IMG01, but identified for example IMG01_1, IMG01_2, etc..)
I would like to find all files that DO NOT have a _ in them. Can I do this? How?
Or I have to search for all files that have a _ by searching for * _ *? Delete these files?
I tried, but program trotted for 2 hours. Just take a while?
I thought that if I could search only files without the _ it would be more effective.
Less than 20% of the files in each folder have not a _ in them.
You should be able to use a? or * to replace a number of characters that are either unique or variable. * book would find both book and facebook, or? ook would only book.
Anyway, there's probably not a way to identify the files corrupted by a search.
Maybe you are looking for
-
Satellite A100 - will not charge the battery
Hello I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected ev
-
How to simultaneously update multi field (chart wpf)
How to use several piece add simultaneously data? For example, there are 18 parcels of graph. The Datasouce of the graph is ChartCollectiongraphds [18] It should run 18 times to APPEND to update the whole graph. Code: APS [0-17] = graphds [0-17] .app
-
E5-571 - only 64 bit OS?
Hello members, (1) when I took the modelWith this laptop E5 - 571 (NXML8SI011) to the service center, the person told me that he can't stand that a BONE, a 32 bit 64 bit OS. Is this true? (2) the specifications of the product mentioned Linux, but sy
-
HI, I lost my cd/dvd drive. It was there before, and when I had a successful previous problem to solve this but not this time. I did the upper and lower bit of regedit but without success. When I picked up this last time I learned to do something wit
-
How can I remove an old unused security e-mail address without having to wait a month?
I installed Windows 8, while he was trying to make 'safe' my computer, that I applied for a new issue of security. This number was sent to an old email address. Try to change this unused address, I find that it cannot be withdrawn until December 23,