Colors out of range

Similar Questions

• I have a lot of trouble recently with colors of the range. My software is updated, my system is calibrated with Datacolor, as in many years with her, but now I norticed much more than before out-of-gamut color images when checking this. Do not print.

  I have a lot of trouble recently with the release of the color range in Photoshop CC. The software is updated. I used to the Datacolor years to calibrate the system, and it worked well always. But now I noticed that I have a lot more images with out-of-gamut colors, and it prints wrong. Is this a problem with Adobe? The rest of my equipment is the same. Any help? I'd appreciate comments. Thank you, Emilio.

  First, the range warning applies to the proof profile that you put in place, under test format. If this is not the profile that you want to print with, there is no relevance.

  Second, range warning is a very large and imprecise indication, and I would just turn off. It shows what is out of range, but not how much. There are better ways, like proofing (even once, test format, toggle with ctrl + Y).

  You can also convert a copy of the file to print your profile and look at the histogram. If you have severe cuts, you can adjust the file accordingly.

  Third, there are people who feel the effect of threshold is best handled by the profile. In other words, doing nothing, just convert and done. I'm not one of them, just thought I would mention it.

  ------------------

  Just to put us all on the same page, here are the basics:

  There are three different color profiles here. The document profile, the profile of the monitor and the printer/paper/ink profile. If all of these profiles are good, the results will be consistent and predictable.

  So to start with the document profile. These are important parameters in the PS color settings dialog box:

  

  It can't be Adobe RGB, but there must be a standard color space (sRGB, Adobe RGB or ProPhoto).

  Then the monitor profile. The Spyder software everything for you, and Photoshop uses this profile to display the file. You don't need to do anything once the software ran - it is all set up automatically.

  You can check in Windows color management has the right profile is configured by default:

  

  Thirdly, the profile of the printer. It's one that refers to the book as "Xxx of Epson Premium glossy", or all that apply. You choose this profile in the dialog box print in Photoshop, and then you go in the printer driver ("settings") and ensure that color management is turned off it. You don't want a double color management.

  If it withdraws, and it still does not seem good, get back with more details.

  Oh, by the way - have you got your NEC monitor with Spectraview calibration software included? If you did, it is greatly preferable to the Spyder software for reasons more than I have space to list here. You can still use the Spyder probe, at least if it's generation 3, 4 or 5. Earlier versions are notoriously few reliable and also not designed for wide gamut displays.

• Monitors flicker and "Input Signal Out of Range"

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  After research, I tried to start safe mode, but the problem persists.

  I read that put the computer to sleep and then wake up could solve this problem... it worked a

  couple of times, but the issue soon returned.

  I tried to reset several times VRAM/LANDAU and SMC.

  I doubled checked all the connections.

  Under the system of preferences > display (when the image is stable long enough for me to see) everything looks OK. Under the screen of the 'Default display' tab is selected. On the color tab, there are three HP2071d listed (with a selected) in the window display profiles. I've linked by selecting one of the other "HP2071d" listed without noticeable change.

  I also reset both monitors to factory settings via the menu screen of the monitors.

  I also came across this mini Mac EFI Firmware Update 1.7 for flickering on end of 2012 Mac Minis, but when I tried to run I got "this software don't is not supported on your system. Ugh. It turns out that my Mac Mini is already updated to MM61.0106.B0A (2015-002)

  My Information System > Hardware > graphics/display info is:

  Graphics Intel HD 4000:

  Chipset model: Intel HD Graphics 4000

  Type: GPU

  Bus: integrated

  VRAM (dynamic, Max): 1536 MB

  Seller: Intel (0 x 8086)

  Device ID: 0 x 0166

  Revision ID: 0 x 0009

  Exhibition:

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3171PFF

  Mirror: on

  State of the mirror: mirror material

  Online: Yes

  Rotation: support

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3170P31

  Main screen: Yes

  Mirror: on

  State of the mirror: mirror of Master

  Online: Yes

  Rotation: support

  I am of the ideas of what else to check/try.

  Thanks for any assistance that anyone can provide.

  bdcs64 wrote:

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Quite the same configuration except here, with 2 Samsung S22B310 DVI monitors on an i5 2.5 GHz in late 2012.

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  Both monitors isn't good. Which would lead us to think that the Intel HD 4000 is overheating and the problem is not with any of the adapters or cables. Although, if one of the cards was not internally, it could put additional heat stress on the graphics chip.

  Personally, I will try a few things.

  1. turn off, unplug everything, open the bottom cover and give it a good cleaning to make sure it cools properly.

  https://www.iFixit.com/device/Mac_Mini_Late_2012

  2. try each monitor individually for awhile configurations see if the problem follows the monitor cable adapter installation.

  (I know he'll be a brake after obtaining used monitors to double)

  3. try using > MacFanControl to monitor and help control the temperature of the GPU ITPP.

  http://www.CrystalIDEA.com/Macs-fan-control

  FWIW, I do not use screensavers, but I do a lot of videos as well as some games of light on both my 2010 and 2012 of the Mini and I really believe that MacFanControl has really helped to extend the life of graphics on these two systems.

  I use the control based on the sensors on the sensor of GPU ITPP and configured so that it starts slowly rise in power of the fan above 129' F

  

• Colors of the range

  I am learning how to set colors in the range and am not having much luck. I googled 'how to fix colors in the range' and tried three different options, but none seem to work as described. If I go to select > color range and choose Gamut is selected too many image, not only the elimination of the colours of the range. I tried to use the new layers of adjustment without result. What I am doing wrong? It doesn't seem like it should be this difficult.

  It is, in fact, the Holy Grail of digital image processing. Yes, it is difficult and worth in special cases, for particularly important pictures. Most of the time, you are better off just letting profile handle it, and if she clips, so be.

  Remember you are probably looking to a lot of cutting, color range every day. If your monitor is a unit of the standard range (i.e. 99.9% of all monitors out there) - then all you see is sRGB (or something very close to it) anyway. Nothing outside of sRGB-ish is brutally cut off by the display profile, out-of-gamut of the display.

  The risk is mainly by losing the details and texture. The only way to get this texture is by some kind of desaturation and the trick then is to do it on the affected areas.

  It is useful to look at what threshold effect is really: what is so saturated that it wants to get out of 255 0 in any single channel, in this particular color space. So it clips to 0 or 255, and when you look at each of the channels, these areas are turning to the high black white solid or solid (true with true black and white). You can spot in the histogram too.

  Here's a long thread on the forum of Luminous Landscape discussing this: http://forum.luminous-landscape.com/index.php?topic=100689.20

• How to keep the colors using the tool to redefine the colors in the range

  I try to paint some pictures of complex mesh. I'm running out of problems with the Recolor tool creating colors of the range and not having not control global group, I had before using the tool.

  I have all my assigned as global color swatches, and I assured that all colors are in the range. I then lock the layers, I don't want to change and choose the ones I do. I then select the Recolor tool, select the tab edit and click to link colors. Then I play with the STL to make color changes, I want to do for the selected layers. I have create a new color group, and then click OK.

  I now have a new design. Nice, but now some of the colors may be out of gamut, and because I have not now global colors I can't easily change their return to be in the range.

  So is there a way to keep the image recolorée to stay in the range? And to create global colors that I can then edit to change my mesh?

  Thanks for any help/clues.

  I have not hink it is possible to keep the colors in the range. The only thing yo could do is limit colors resulting libraries of nuances. You could choose a big library such as the PANTONE. But that would of course still limit yourself to a smaller range of colors that may be required.

• HP 2509 b monitor guard displaying "Input Signal Out of Range" and then go to sleep.

  I went on vacation and shutdown my computer for 2 weeks.  My monitor worked great for a month before.  I came home last night and turned on my system this morning.  Now I get a white message in the middle of the screen with "input out of range Signal. Change the settings for 1920 x 1080 at 60 Hz"and then the screen goes to sleep.  I can turn the monitor off, wait a moment and then turn it back on again, but continues to repeat the same thing.  I checked and the screen is already set to 1920 x 1080 at 60 Hz.  I use VGA and have the default positioned like this.  I followed the guide to troubleshooting online for this error, but it did not help.  Can someone tell me please how to fix this?

  Finally, I got this figured out!  Here's what I did.

  Control Panel

  Display

  Parameters

  Advanced

  Intel(r) Graphics Media Accelerator Driver

  Graphics properties

  Display settings

  Expansion of the display

  Chosen at this stage full screen (no border) instead of "maintain proportions"

  As soon as I put this the error screen disappeared!  Can someone explain to me why this adjustment has been around?  I would like to know.

  Thank you all for your help.

• Unable to connect PS 2 to tToshiba 19W330DB TV - "out of range" msg

  PlayStation 2 for as much as I know only need the ypbpr lead to connect to the TV.
  I have connected the audio cables very well, but when it comes to connecting the video cable (yellow), it seems to be wrong.

  When you turn the console on the initial screen for playstation comes in black and white.
  The screen flashes then a little and the message 'out of range' appears.

  Someone at - it ideas on how to connect?

  Hello Laura

  Please don't be crazy on me, but this is the support forum for the Toshiba COMPUTER system. If you have connection problems Playstation 2 I recommend you contact the manufacturer of the Playstation support. They know how to manage with own product.

• "Error 0xBFF69012 attribute value is out of range" for Point Grey Grasshopper2 GS2-GE-50S5M

  Try to get the camera above to work at MAX. Running on LabView 2010 SP1 with Vision Acquisition software August 2010.

  Errors illustrated: error 0xBFF69012 attribute value is out of range

  Camera works perfectly well on the supplied software advanced Grey. Point Grey Image Filter Driver installed. Turned off the Windows Firewall. Card (http://www.sonnettech.com/product/prestogigproec34.html) Ethernet supports Jumbo Frame.

  Read through the following measures without result:

  http://digital.NI.com/public.nsf/allkb/FCE7506A3AF7636C862576240072716D

  http://digital.NI.com/public.nsf/allkb/A0A1CE4704265BF2862578CA007A4CF8

  How will I know if there is a problem with the XML file?

  What are the possibilities that this device is not compatible with IMAQdx?

  Thank you.

  Problem solved in new firmware version 1.25.3 - 00.

  Contact Gray Point to this firmware.

• The IVI Drivers: RangeCheck of initialization option set to true: failed to get an out-of-range error

  Hello

  I'm new to IVI drivers (started using them last week) and I have a problem with the option of initializing RangeCheck.

  So get used to the IVI drivers, I used the example provided with the AgilentE36xx IVI - COM driver (on my computer, it is located in C:\Program Files\IVI Foundation\IVI\Drivers\AgE36xx\Examples\VS.NET\Cpp\Example1).

  I could do everything I wanted except get an error out-of-range, during the passage of an out-of-range value to a function. I put the RangeCheck init option to true, but I don't have any error in the simulation, nor with the connected equipment.

  Attached is the code (from the example of Agilent) but modified so that it should throw an out-of-range error when adjusting the tension on the following line: spOutput1-> VoltageLevel = 1000; ... why no error.

  Still, it runs correctly. Can someone tell me what I'm not doing correctly.

  Kind regards

  Roman

  Hello

  I posted the question on the Forum of Agilent.

  Here is the link to the post: http://www.home.agilent.com/owc_discussions/thread.jspa?threadID=33348&tstart=0

  The problem is now resolved. Thank you for your help.

  Kind regards

  Roman

• "out of range" error on I-110 fieldpoint

  We try to connect the pressure Omegadyne transducers (PX1004L1) that give a reading of mV to 10 v excitation. Before you connect the 4 cables (excitation, signal and two Commons) I-110, we get an error 'out of range '. Disconnect the signal + / leads and measure with a multimeter, we read the mV expected signal. If reconnect us the signal + / conduit and disconnect the excitement + / leads and then connect to a power source (external to the I-110), we read the expected of the I-110 mV signal. Any suggestions on what is happening here? We have already exchanged the head I-110 with a spare part that we know is operational.

  I have not heard of "Omegadyne", but I know Omega.  What is the device?  http://www.Omega.com/pressure/PDF/PX1004.PDF

  You're talking about 2 Commons.  But what I see, it's a bridge 4 circuit son strain gage.  I think you should use a SG-140 module to read this device.

• "Value is invalid or out of range" when you build the project in CVI 2009

  I converted a project to the wire of the CVI 9.0.1 to CVI 2009, and whenever I try to compile the distribution I get immediately the error message "Value is invalid or out of range" and stop the construction.  This error message is not too terribly useful to determine what the problem is, and I don't see anything obviously wrong with the signs of 'change the Installer '.  Any idea what's going on?  Thank you.

  Well, I'm a little confused by what I see. The newspaper confirms my suspicions earlier that one of the values of timer progress cached version is cause of an error. However, the values in the file "TriboScan OFFLINE.cds" you posted appear very well and do not cause an error when I copy in .cds another simple distribution (since I do not have the files to test your actual building distribution). Are you sure that you build the 'TriboScan OFFLINE.cds' distribution? In any case, I recommend a little offending the .cds hand editing. Save first (just in case), open it in a text editor and delete everything between and (that should be all down). This should solve your problem.

  Let me know what you find.

  A. Mert

  National Instruments

• I am facing a problem with the beep.vi. I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound.

  I am facing a problem with the beep.vi.  I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound. Everything works fine except the sound alarm. It gives the table 1 d of type mismatch. I tried to fix this by placing it in a box structure. But it still does not work. If someone could help? Please find attached my VI. Best wishes to all visitors to the Forums of Discussion OR.

  Ihab El-Sayed

  published here: http://forums.ni.com/t5/LabVIEW/Playing-sound-based-on-exceeding-a-threshold-value-1D-array-data/m-p...

• Prosilica GigE GC650C error 0xBFF69012 attribute value is out of range

  Hi all

  I had been using a GigE Prosilica GC650 of camera on a target real time with no problems. Today I tried to connect the camera to the MAX and I get the above error. I have read every thread I could find about this error and have tried the following with no luck...

  -Deletion of files xml, iid and CIM with the camera disconnected and non-powered

  -Update the firmware of the device to 1.36

  -Repair OR-IMAQ 4.3 installation

  -OR-IMAQdx 3.4 repair facility

  The Prosilica camera viewer works very well. Another oddity, it's the same device works fine in the same version of MAX on another computer with hardware counterpart. This computer has versions of the same software (Labview 2009, IMAQ, etc.) to the problem machine.

  I have not installed software or updated between the time when the camera was working and now (about 1 week).

  Any ideas would be greatly appreciated!

  Chris

  Hi Chris,

  The only thing I can think of is to check the link speed. I think that some of the attributes on the Prosilicas go out of range, when they are connected to 100Mbit instead of 1 Gbit. Check that the interface of the camera card and the network show a gigabit link. Maybe you have a bad cable which is originally the link down to speed.

  If this does not help, let me know and I can try suggesting other things we can try.

  Eric

• indicate the value out of range

  I want to indicate whether a digital indicator value is out of range, could someone give me a link or suggestions of what common ways are there to show whether a value is a limit above or below a lower limit.

  Thank you very much!

  
  

• "Frequency out of range".

  After launching a game, my computer has been changed, (I think) 1600 x 1200. Of course, it's too much for my monitor to manage, so the screen becomes black, and it is written in a blue box "frequency out of range". (and the box bounces around the screen making fun of me.) If I try to restart windows, it won't happen again, so I have to restart in safe mode. I can't change my resolution in safe mode, and if I try to switch to normal mode to change it I get ""frequency out of range,"and I don't see what buttons press.»

  BTW, sorry for the bad grammar

  --------------------