Columns in Pages

I want to translate text and therefor I want to insert 2 columns in a Pages document, so that the original text in the first column and the second (right most) the translated text.

When the columns are filled with text, the overflow goes up > down and from left to right. Then the next page up > down and left to right etc. What I want to accomplish, it's that my text remains in the column where I started it and all that it has length. A text box is also not possible, because it is not automatically adapt to the length of the text, and it remains on the page where it could / created.

Is this possible?

concerning

Hans

Columns in the Pages are not independent, and text flows from the first in the second and on a page break, second text column first runs into the first column on the new page. Instead, you must use a two-column table that overflows the page boundaries. Content in the individual table columns will remain in these columns in the following pages.

With the table selected, visit tab reorganize Panel Format and define the Placement of the object to move the text and the text wraps Inline with the text. This will allow the table to overflow the page limit. In the text of the table tab, there will be an option to return the text in the cell, so that your text will end if necessary. You can also remove all grids table if that is your case of presentation. The view menu: see available that will help to position the contents of your table.

Tags: iWork

Similar Questions

  • iBooks/iPad two columns per page

    Since this morning after an update to the iPad, iBooks is showing the book pages in two columns instead of a full page, from left to right.  How can I change this back to a page on the screen?

    I saw that too. Stupid solution. Increase your font a to the top of the smallest.

    The smaller police apparently goes into two columns.

  • How do I exit my a plain text, column 2 'page' of the CF Report Builder 10?

    FIRST

    I have a cover page in the Report Builder 10, report header and the size is 11 x 8.5.

    The footer contains labels for the display of the name of the company, all rights..., straight copy..., report name, and date.

    I would like to show it, so I know it will work. The cfoutput tag works only on queries... so is there a CF method to display "header and footer"?

    This experience contains a file with the request .cfm and .cfr files, using Crimson I see the file (test1.cfm)

    test1.cfm:

    SELECTtblStateProvince.State, tblStateProvince.Name, tblFacility.Name such as FName, tblFacility.City, tblFacility.PostalCode, tblFacility.Address,

    tblFacility.OID, ContractNumber, ContractEffectiveDate

    OftblFacility INNER JOIN tblStateProvince ON tblFacility.OIDStateProvince = tblStateProvince.OID
    WHERE(((tblFacility.OID) = 37667));

    Here is where I tried to assign the string to the "labeling" of the report header.

    tblFacility.Name = "Yosemite Valley, LLC"

    TReportStaticText104 = ' #tblFacility.Name # '.

    ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ----------------------------------------------------------------------------------

    SECOND

    tblFacility.OID = "#tblFacility.OID #Session.» (initially, I had this in the query, but the "Builder objected (SEE 10 runs this query).") Why is - what the "builder" can't solve this assignment?)

    ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ ----------------------------------------------------------------------------------

    THIRD


    In (CFeclipse - Browser View) test works except that it displays the query... so that means if there is no field/tblFacility.Name data referred to on my first page, I can't load the label... Right?

    The 'controls' are not something I can program?

    Do not ColdFusion syntax include in the text of the query in the query designer.

    The error message said you that MS Access does not recognize the text of your query.

    Note that the example code I posted must be entirely contained in one. CFM file.

    See you soon

    Eddie

  • When writing an A / V script the only show of columns on page 2 and I am unable to write past the value of a page. Help me oh Adobe Story, you're my only hope.

    Maybe it's my browser? Chrome
    This problem persists under Mac and Windows 7/8

    Thanks in advance!

    Johnny

    Hi Johnny,.

    Maybe it's my browser? Chrome

    This problem persists under Mac and Windows 7/8

    Thanks in advance!

    Sorry for the frustration. See this possible workaround: Re: text 'disappears' script (AV) two columns

    Please fill in a bug here report: http://adobe.ly/ReportBug

    Thank you

    Kevin

  • Flow text across columns and pages

    Finally have a new version of my photo book.

    Each image is accompanied by a text in the paragraph called Description, legend and owner styles.

    Legend and owner appear connected as a single line of text under the picture.

    Description is a more detailed discussion, to be published in a table of contents called descriptive content, towards the end of the book. Each description is co-located with its image of parent for continuity and portability, where an image is moved to another page, etc. Upon publication, the co-habitant copy of the image to be hidden.

    Because the table of contents entries have their own style, I expect that hide the co-habitant description text allows the corresponding entry in the table of contents to persist, but does not occur.  Table of contents Description entries are being hidden with co-located versions. I'm scratching my head to find a better approach for this.

    Each table of contents entry starts with the number of page, followed by the caption and Description.

    In the table of contents is generated, the Description appears as a new paragraph with the page number. In this case, I need overcome the page number display entirely. Best I can do right now is to have the number followed by page description.

    Two questions:

    1 - could you one of you point me to an example of a macro or script routine that can be a part of the materials-generator table, that traverses all table of contents entries and removes the unwanted ending page number. Or you could take me to a workflow to get this done better.

    2 could you show me how to format table of contents entries only. that is, to avoid her inherit a property 'hidden' in the source text? Or is there a better way to do this?

    1, the table of contents entries is to have a page number. Just click the show more Options in the dialog Table of contents and the value of the drop-down list number to no page number.

    2, as I understand it, you can set a style for the table of contents entries, do not use the style from the paragraph in the text.

  • Column link to the page on the right calendar

    Dear all,

    I would like to create a link from a date column in a report page (e.g. page 10) to a calendar page (e.g. page 2).

    Let's say you have 15-dec-2015 in the data column, so I would like to open with this link to the page of the month of December in 2015.

    If the date value January 14, 2016 and then the page for the month of January in 2016.

    I did research on the internet, but this was not successful so far. I need some help here.

    I tried the following:

    In the section target the date column:

    Page: 2

    Set items:

    Value name

    ---------------------------------    -----------

    P2_CALENDAR_TYPE M

    P2_CALENDAR_DATE #EVENT_START_DATE #.

    Clear Max: Clear Cache

    This gives error because of the P2_CALENDAR_TYPE existing does not in page 2.

    I use APEX 5.0.1.00.06 on the 11g database.

    Kind regards

    Cafer

    Hi Thibault,

    I suggest to have two pages from the point P2_STARTYEAR, P2_STARTMONTH in your calendar page and use the function gotoDate after setting the month and year in these elements of the page. Set the static id of your MyCalendar calendar and try this code in page loading section:

    $(document).ready(function() {
       // Get Year and Month
        var year = $("#P2_STARTEAR").val();
        var month = $("#P2_STARTMONTH").val()-1;
       // Goto the date
        var d = new Date();
        d.setFullYear(year);
        d.setMonth(month);
        $('#MyCalendar').fullCalendar('gotoDate', d);
    });
    

    I hope that helps you.

    Concerning

    Mahmoud

  • Columns in the Pages of Dreamweaver CS3 templates appears correctly in IE8

    I have a site that has the most pages created with a page template that displays three columns below the navigation bar (including a small column to the left for the logo at the top of the table has four columns).  Page home (index.html - no the model) shows the columns as well as the pages of model correctly, but all pages created with the model show the first column as a means of scaling and the two columns as much too narrow.

    I searched the internet for a solution, but my knowledge of HTML is limited, it is almost impossible for me to find even a relevant forum topic, and still less a viable solution.  All I want is the template pages to three visible columns below the navigation bar to display the same width as those of index.html.

    I work on a mac, and the pages all preview them correctly in Safari, Firefox etc, but not in IE8 on Windows 7 machines.

    I tried rather indelicately push the different bits of code to set the width of the columns and make orders such as table-layout = fixed, etc., but absolutely no effect.

    The site is: www.southoverfoods.com

    If anyone can help I will be grateful.

    You don't want to fix the errors-

    http://validator.w3.org/check?URI=http%3A%2f%2Fwww.southoverfoods.com%2Fabout.html&charset = % 28detect + automatically 29% & doctype = Inline & group = 0

    Most is simple.

    If you view the page in IE9 and click the compatibility, rendering looks like right.  Unfortunately, I can't force this rendering with all accepted uses of meta tag!

    So I'm a bit confused what to do...

  • Problems with page 2 columns

    I have and old document/publication that worked fine when I used it a year ago and now I want to use it again.

    It is 64 pages, about A4 with side of pages, and with 2 columns on each page - it's 4 columns on a gap.

    I deleted the text and when I place a new text (Word format) with Shift-LefClick in the top left of the first page, left colum, then the following occurs with some Word files:

    It flows down the two columns on page 1, page breaks 2.

    There are 2 columns, but are connected to him, so that I can't spend one of them.

    And the baseline grid will on the two columns on a page.

    Who is wrong?

    There is only a single master spread for this file (ithas left and right of the pages) - normal - and there's that no existing frames on the master page or pages of the document.

    Text flows normally for me, from the left column and then fill the right-hand columns, before adding new pages and fill those left to right. What happens differently for you?

  • copy 2 columns of figures for printing

    I have a table rows 950 long I want to copy two of the columns to the pages for printing (that I can't be able to print only two columns in number).

    This seems to be fine except when I paste (using the ' paste the results of the formulas), I only see these columns on page 1.   When the columns move on page 2 and beyond there is just an empty space.   That said, the rule of the table with two columns is visible, but not cells.

    How do I see the columns on page 2 and beyond?

    Select the table in the Pages. Tab rearrange the text Inline with text wrapping and the Placement of the object is to move with the text. This will leave the table with two columns spread on the following pages, and not truncated at the bottom of the first page.

  • I have a lot of activity of page file and page faults with 2.5 GB of RAM memory

    Hello

    I tried to find the reason for the slow performance on my pc and the limiting factor seems to be the activity of page file and errors of memory page. It is Win XP sp 3 with 2.5 GB of RAM and a processor 2.8 GHz (core). The task manager has never really shown a problem, memory use was rarely higher than 30%, around 10% page file use (I have the initial value, 3.5 GB 4 GB max) and CPU rarely hits 100%, but even when the task manager has revealed no particular problem the system shuts down sometimes for several seconds on starting the program or file to open. To follow the reason down I have installed a more detailed tracking software, which shows up to 1200 files page per second being transferred to or from the virtual memory and up to 8000 page errors per second during these breaks. This could be the cause, and if I can change all the settings to make more efficient memory management?

    Thank you

    My copy/paste standard when someone thinks PFs is / are part of their performance problem (but it's probably not...):

    I'm guessing that you see in the Task Manager and you have chosen to display the column of Page faults?

    If this is the case, given that the column of Page faults is not normally displayed if you activated, perhaps you are looking for some performance issue.

    A Page fault does not mean that there is a problem.

    A Page fault means generally that the application needs some data that are not in physical memory (RAM) at the time.  When the application needs some data that is not in the local memory and must recover from the paging file on the hard drive which is a way, you will see an error Page generated.

    Sounds kind of bad because it has the word 'Fault' in there, but it is really normal.  If you call your task manager after a reboot (do not use any browser), all applications are likely to have at least some page faults, even if you just restarted and "did not" do anything yet.

    Some applications may generate a few hundred or a few thousand Page Faults on a restart and then does not change.  The only thing in the task manager that will have zero Page faults is the system idle process, but this is a special case.

    Knowing what is a Page fault, you can understand that if your system does not have enough RAM for your operations, XP will need to move out to the pagefile often to get things he needs things there can be not in RAM when he needs.  Whenever she does this, you will have a Page fault.  The less RAM you have, more your applications will have hit the swap file to get their data, but you should be able to control some of this and you may even not notice "" the faults of Page at all--they happen all the time.

    So, one might think that if you turned off your pagefile and ran without a paging file, you would see zero Page faults in the Task Manager.  That sounds good, but this isn't the way things work.  XP works best when you have a system managed pagefile size (generally) the value if you probably won't work without a pagefile.

    You would always see Page errors in the Task Manager is because there are hard and soft Page faults Page faults, and you would see soft Page faults.

    A hard Page fault would be access to the disk paging file.  A soft Page fault would be just a shuffle or the reorganization of the things that are already in memory.  The Task Manager just them put everything in the column Page Fault and you can't make a difference.

    Given that the Task Manager offers two types of page faults in a single column you will need else with more granularity (such as performance monitor), tools that allow to separate Page faults in soft Page faults and performance monitoring of hard Page faults.    If you turn off your paging file and use Perfmon to split the Page faults on different types and follow them separately and have no pagefile, you see zero hard Page faults, but still see soft Page faults as a separate counter.

    I ran XP for a l-o-n-g time with only 256 MB of RAM and was quite satisfied with her for several years once I dialed things.

    Most your system and applications run, Page faults accumulate so that application until the application ends and restarted, then the Page counters error starts to the new and will keep goes upward, upward, toward the top and up - it does not mean necessarily you have a problem and PFs are not likely to be the cause of your performance problems.

    I do not think that you will see top-down but you can start them by restarting the application.

  • I can not display the page numbers of my books

    I want to sort my books pdf by number of pages, but when I add this detail (Pages) in the folder the whole column is empty.

    How can I get page numbers to display?
    I tried the following far with the following results:
    1. the folder does not give me the ability to edit the details of the file when I right click on it so I can't enter the page numbers manually.
    2. when I right click and check the properties of the available tabs are general, sharing and customize.  Customize tab only allows me to change the folder icon.
    3 when I select the properties of one of the pdf books in the folder tabs only I get are general, Pdf, and resume and I am unable to add the page number, use one of these tabs as well.
    4. I downloaded 'Quick pdf tools' that allows me to be able to change the pdf information because I thought that the reason why the column is empty is because the PDF itself does not page number filled in, but by viewing the properties with this tool, I am able to see that the page numbers for all the pdf files are listed (and can not be changed) so I don't understand not why the column for pages shows blank in the windows folder.
    What I resorted to that adds the keywords column to the file and write the page numbers in this column because the information I enter in this field will appear in the windows folder column.  I have a number of books, and it's a little disheartening to think that I must do this for each book when the information is already there for example the page number.
    So, if anyone can let me know what I can do to make the Pages column displays the number of pages rather than remain just an empty column, I would be very grateful.

    See if the following help to view pages:

    1. in a folder, choose 'View' - 'choose details '.

    2. a dialog box "Choose details" will appear. From there, you will have many options, listed here in alphabetical order:

    * Title of the album
    * Artist
    * Attributes
    * Audio sampling rate
    * Audio sample size
    * Author
    * Flow
    * Camera model
    * Category
    * Channels
    * Comments
    * Company
    Author's rights
    * Date of access
    * Date of creation
    * Update
    * Date photograph
    * Description
    * Dimensions
    * Duration
    * Name of the episode
    * Version of the file
    * Type
    * Keywords
    * Name
    * Owner
    * Pages
    * Product name
    * Product version
    * Description of the program
    * Protected
    * Size
    * Status
    * Topic
    * Title
    Track number
    * Type
    * Year

    Naturally, some of these options do not make sense for all folders. But for those who have a sense, check the boxes next to the details you want to see.

    If you want to move an element upwards or downwards in the list (higher appear to the left in "Détails" view), click on the item in question and press the 'Move up' and 'down '.

    I hope this helps.

  • Maximum number of columns in model RTF Pivot

    HI -.

    For the model previously mentioned here matrix report problem with template RTF - text columns

    I want to restrict the maximum number of columns per page, and the table should be repeated for the rest of the columns in another page.

    For example, if there are 5 columns must be returned, I want the first 3 columns in the first page and the 2 others in a second page (with the hole repeating frame).

    It's for keeping data legible printing of the pdf format, otherwise the data seems damaged and unreadable.

    Y at - it ideas to achieve this requirement?

    Best regards

    Rupture of the horizontal column works fine in the attached version of the RTF model.

  • Filter must be a page to another page in Oracle APEX

    Hi all

    I need to display the filter from one page to another page that I under condition that assumes that when I click on the link #DIFFERENT_USERS # then the column of "Workbook" located on page 6 must show as a filter on page 4. Can someone help me on this.

    If #DIFFERENT_USERS # is not null and: APP_PAGE_ID = 6

    THEN

    apex_ir.add_filter (p_page_id = >: APP_PAGE_ID,)

    p_region_id = > v_region_id,

    p_report_column = > "workbook."

    p_filter_value = >: P4_WORKBOOK,.

    p_operator_abbr = > 'EQ ',.

    p_report_id = > v_base_report_id

    );

    END IF;

    END IF;

    Kind regards

    Sushant

    Hi LnTinfotech,

    LnTInfotech wrote:

    Hi Kiran,

    Yes it is mandatory to set the IR filter and the #DIFFERENT_USERS # on page 6 is not on page 4 so when I click the link on the page 6 #DIFFERENT_USERS # the workbook to column 6 page should show as a filter on page 4.

    I can't do it in IR could you please help me how can we display the filter in another page that I don't know javascript.

    If #DIFFERENT_USERS # is not null and: APP_PAGE_ID = 6

    THEN

    apex_ir.add_filter (p_page_id =>: APP_PAGE_ID,)

    p_region_id-online v_region_id,

    p_report_column-online "workbook."

    p_filter_value =>: P4_WORKBOOK,

    p_operator_abbr-online "EQ."

    p_report_id-online v_base_report_id

    );

    END IF;

    END IF;

    Kind regards

    Sushant

    The above given code a result of disparities:

    • You cannot use the substitution column Viz #DIFFERENT_USERS string # directly in the PLSQL code, you need to put an item on page 6 and then use this value to point to your logic PLSQL.
    • The APEX_IR. Procedure done ADD_FILTER references: APP_PAGE_ID. Since you wrote the code above on page 6, in this case APP_PAGE_ID will be 6 and above code will try to set up the filter IR on page 6 so that your IR is on page 4. If you wrote the code above on page 4, in this case APP_PAGE_ID will be 4 and above of the code still doesn't work because of the condition if know: APP_PAGE_ID = 6. Even if you wrote the code above in the application process, still it will not work until the APP_PAGE_ID value will change when a page is passed to another page.
    • You are referring to the session state from P4_WORKBOOK, are you sure the session state from P4_WORKBOOK contains the appropriate value, before running the PLSQL code given above (considering you wrote above of the code is written on page 6)
    • Is 'Workbook' column name in IR where you want to set the filter? You must use the name of column instead of the column label.
    • Finally, are the variables v_region_id and v_base_report_id organize the legitimate values of IR whose filter you want to set?

    Reference: APEX_IR. ADD_FILTER

    Having a basic knowledge of javascript is essential for a Web Developer. You could start here: Tutorial JavaScript

    I hope this helps!

    Kind regards

    Kiran

  • No sequences present in the comparison of two models of auto-increment columns and triggers

    Hi, I'm using Oracle SQL Developer Data Modeler version 4.0.3 and I get the same behavior described in the discussion 9876135.

    Y at - it an update on this issue?

    Thank you

    Hello

    No DOF preview is currently generated differences in properties on the auto-increment columns properties page.

    However, if you create a sequence with the relevant name (and the user as appropriate) in your physical model Oracle, then its properties will be used instead of the ones on the page Auto Increment, and in this case the DOF preview will include the DDL for changes in its properties, e.g.

    FALL OF SEQUENCE "TABLE_1_SEQ".

    ;

    CREATE SEQUENCES "TABLE_1_SEQ."

    START WITH 5

    INCREMENT OF 10

    ;

    If only the increment "by" is changed, an ALTER SEQUENCE will be generated:

    CHANGE THE SEQUENCE "TABLE_1_SEQ".

    INCREMENT OF 10

    ;

    David

  • Column attributes - attributes elements: does not develop (assess) point

    Objective: On query SQL (editable report), dynamically set the column of type attributes for a text box (or one?).

    Approach: Variable place (point of the application) that attributes in the column attributes - attributes of the element.

    Current obstacle: constant works in the attributes of the element, but when a variable is used, the source of the page not rated shows demand point (& F_ATTRIBUTES).
    F_ATTRIBUTES has the value style = "color: blue;" height: 100px; "in a process before the header.

    Issues related to the:
    (1) is it possible to have a variable that is rated in the attributes of the element?
    (2) or is there another (single?, direct?) way to change these attributes dynamically when rendering the region?

    I'm not looking for a dynamic (triggered by the user) action. I want to just monitor some columns when the region is rendered.

    Example:
    WS: APEX_Examples_01
    User: demo
    PW: demo
    Application 56414 - column Wrap, page 3 see the 'DUMMY_COLUMN '.

    Thank you
    Howard

    Documentation for the attributes of the element, while accurate, is a bit of light: "attributes of the element - define a style or attribute of the element of standard form." (in http://docs.oracle.com/cd/E23903_01/doc/ ) ( doc.41 e21674.pdf, p. 9-56). Help is not so verbose: "Defines the attributes of the form element."

    Bump

    Reviewed by: Howard (in training) on May 9, 2013 AM

    Howard (in training) wrote:
    Objective: On query SQL (editable report), dynamically set the column of type attributes for a text box (or one?).

    Approach: Variable place (point of the application) that attributes in the column attributes - attributes of the element.

    Current obstacle: constant works in the attributes of the element, but when a variable is used, the source of the page not rated shows demand point (& F_ATTRIBUTES).
    F_ATTRIBUTES has the value style = "color: blue;" height: 100px; "in a process before the header.

    Issues related to the:
    (1) is it possible to have a variable that is rated in the attributes of the element?

    N ° annoyingly substitution only is not supported in these column attributes.

    (2) or is there another (single?, direct?) way to change these attributes dynamically when rendering the region?

    'Simple' and 'simple' are subjective.

    Why these styles take place in a part of the application?

    You can use the attributes of the element to assign a class to the elements of the relevant column:

    class="f-attributes"
    

    And create a style sheet using the application element in the header HTML page where it will be substituted:

    
    

    You should probably add a static region ID to the region in a table and use in the CSS selector to make sure that its specificity is high enough to override the CSS theme.

Maybe you are looking for