com.skype.raider process has unexpectedly with calls vedio stoppef

Similar Questions

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• Receive the error message "the system c:\WINDOWS\system32\services.exe process terminated unexpectedly with status-1073740972 code".

  Original title: c:\WINDOWS\system32\services.exe

  I get: the system process c:\windows\system32\services.exe ended unexpectedly with the code of State-1073740972. The system shutdown will be present and reboot. It's driving me crazy! Help! PLEEEASE

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  How to configure Windows XP to start in a "clean boot" State

  Hope this information helps.

• Error - c000021a {fatal system error} the Windows logon system process ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000), not able to start the computer.

  Original title: computer will not open a session.

  c000021a {fatal system error} the windows logon process prosses systewm ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000).

  Hi macduf123,

  You did it all change hardware or software on your machine before this problem?

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe.

  You can follow this link and check if you are able to start correctly on the desktop.

  How to solve an error "STOP 0xC000021A.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• STOP: C000021A {FATAL SYSTEM ERROR} RESPONDING SESSION MANAGER SYSTEM INITIALIZATION PROCESS ENDED UNEXPECTEDLY WITH THE STATE 0XC0000003A (0X00000000 0X00000000)

  I HAD UPDATED MY WINDOWS SP2 TO SP3 HOME EDITION AFTER A FEW WEEKS OF WORK I GTO MESSAGE AT STARTUP AS NTOSKRNL. EXE IS CORRUPT OR MISSSING ON THE USE OF THE REAL CD BUT NOW I FIXED THE WINDOW STARTS BUT NO NEWSPAPER ON AUTOCHECK DISABLED SCREEN AND THE BLUE SCREEN WITH ABOVE CODES IS THE FINAL RESULT

  SNS.cool,
  Thanks for posting on the Microsoft answers Forum.  Take a look at the article below.  It includes information about the problem you are having.

  http://support.Microsoft.com/kb/156669

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fatal error message, system process ended unexpectedly with the status of 0xc000003a (0x00000000 0x00000000)

  Windows does not start, press the system restore, but it happens with stop: c000021a {fatal system error} the session manager failed to create protected prefixes of the completed system unexpectedly with the status of 0xc000003a (0x00000000 0x00000000) the system stopped

  Hello

  ·        Are you able to boot into office?

  ·        Remember to make changes to the system?

  I suggest you to remove the external devices (such as a printer, scanner, etc.) on the system and check

  Method 1:

  I suggest to start in safe mode and check.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Method 2:

  I suggest you begin the last known good configuration and check.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select last good known in the list and press ENTER.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stop: c000021a {fatal system error} the windows Logon Process system process ended unexpectedly with status 0 x 40000015 (0x00000000 0x00000000) the system has been shut down

  My husband must have some kind of bug in his computer as Kaspersky Internet Security, when he went on the internet, gave him a choice to block something that was causing a problem.  When he clicked "Block" - he got the BLUE SCREEN!  Is anyway for him to cancel it and save all her pictures on his computer?

  It has a Dell Dimension 8400 computer about six years.
  ----
  Sorry to bother you, but this time we did shut down his computer and restarted everything was fine.  Apparently he had clicked on something like 'do not allow' or however its formulation that I do not see.  So now we have to probably save photos and things out of his computer and take out the drive to reinstall Windows XP because there still be some sort of bug in there because we are getting popups saying some program are eager to enter the passwords section.  I don't know much about it but try to fix it!

  I looked into Kaspersky and ran a browser Configuration and analysis of the vulnerability in his computer and found that there was a kind of 'control popup' in Internet Explorer that had been added in the settings of the pop-up window. -I deleted who.

  I saw a setting in Kaspersky has been changed by default (they say "changed by the user, but did not change). -I have put all Kaspersky setting at default.

  So now, we hope the computer that my husband will work very well in the future because it's good now, even after rebooting.

  Now, we will have VERY serious about all of his photos on his backup external hard drive!

  If we have more problems with that, I'll be back but for now, everything is GOOD!

• Stop: c000021a {fatal error} the windows logon system process ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000) need help please system does not start

  Hi my HP Compact computer running with windows Xp professional recently had security tool, antimelware doctor and I kind of have got rid of him, he also put some viruses on the winlog thing and I could not get rid of it with antivirus software that I don't know the name of, Malwarebytes' Anti-Malware and AVG 2011 I did a scan antivirus in safe mode with AVG(in command prompt mode) and he put a bunch of virus the virus volt, I'm out there and there was a running called 2008 command prompt and I clicked on output and it says that this program is not complete (or something similar) save all unfinished work before going out and me did not run this command prompt , so I left Malwarebytes' Anti-Malware and avg, then I restart my computer and we get the blue screen of death say stop: c000021a {fatal error} unexpectedly finished process windows logon process system with the status of 0xc0000034 (0x00000000) (0x00000000) system will reboot, and whenever it restarts, it says the same thing, I can't use safe mode cause it resets and starts normally any help pls I have files I need this computer?

  You can create a bootable XP Recovery CD of Console and replace the file, but it may be easier for you to make boot CD of a Hren.

  When you start the Hiren's CD, choose the XP Mode of Mini and it has an interface in XP style Explorer where you can find and replace the winlogon.exe suspicious or missing file.

  There should be a copy of winlogon.exe here:

  c:\Windows\System32\dllcache

  Rename your current c:\windows\system32\winlogon.exe file (if it exists) and copy / paste the replacement of c:\windows\system32\dllcache.  If you do not see here, search your HARD drive and find one.  Another possibility (depending on your environment) is c:\windows\ServicePackFiles\i386, or c:\i386 d:\i386...

  You just need to replace the file winlogon.exe somehow.

  When you are finished replacing, restart as usual (remove the CD bootable of course).

  With the help of Hiren, you can also copy offshore on an external device (USB key or HARD drive), all personal security files.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

  I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

  I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
  What about Otto
  Windows vista Home basic

  Hello

  Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  Pls teach the procedure for resolution of the problems of this error message.

  Hi mac62sg,

  Remember to make changes to the computer before this problem?

  You can follow the steps mentioned in the article below

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• A process or thread crucial to system operation has unexpectedly left or came to an end.

  So, if you look at the other question, I asked, you will see that I had a few problems under Windows 7. Now, I'm having almost exactly the same problem after return to windows Vista.

  Twice now, after that immediately turned on the computer and the starting windows, I got the system slows down suddenly and freeze. Previously, in windows 7, this has led to many problems, and ultimately the system was unresponsive and unusable until I reinstalled the operating system. Under vista, the computer actually seems to try to solve the problem, and I am fairing slightly better.

  Earlier, I got a blue screen with the 0x00000F4 error code (I couldn't have the correct amount of 0) and the message that is indicated in the title. Once the computer is restarted, it works very well, and I found it in under the window newspapers/system event viewer:

  The structure of the file system on the volume C: has now been repaired.

  Event ID: 130 Source: Ntfs
  The event data:

  VolumeIdLength 2

  VolumeId C:

  RepairDetail 25008: Startup Repair on 13/04/2010 at 17:45:14:941 26084: remove an entry from index to index the file 0x2c000000004b8a 0x12000000007fa7. 27094: an index entry in the index to the file 0x12000000007fa7 point unused 0x2c000000004b8a. 25009: repair end on 13/04/2010 at 17:45:14:941

  RepairDataLength 136

  RepairData 8A4B000000002C00BB00170006000000000000000000000000000000000000000000000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

  There is also another warning of the same nature, which seems to be a repair on a different part of the C: drive.
  In addition to this, I see warnings that the following packages (which appear to be updates security) do not apply to my system. The only thing I installed in this time was windbg, so these errors can be that, but I do not. The packages are:
  
  KB979309 and KB978601 (there are four separate warnings for this package)
  In addition, I tried to analyze the minidump created by crushing with windbg. Here's what I got, but I don't know if I was doing it right or not.
  CRITICAL_OBJECT_TERMINATION (f4)

  A process or thread crucial to system operation has unexpectedly left or been

  terminated.

  Several processes and threads are necessary to the functioning of the

  System; When they are finished (for some reason any), the system may not

  function longer.

  Arguments:

  Arg1: 0000000000000003, process

  Arg2: fffffa8007998c10, object of ends

  Arg3: fffffa8007998e48, name of the process image file

  Arg4: fffff80001ee1af0, explanatory message (ascii)

  Debugging information:

  ------------------

  PROCESS_OBJECT: fffffa8007998c10

  Nom_image: csrss.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  MODULE_NAME: csrss

  FAULTING_MODULE: 0000000000000000

  Nom_processus: csrss.exe

  EXCEPTION_CODE: (Win32) 0x875b7f0 (141932528).

  BUGCHECK_STR: 0xF4_875B7F0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  CURRENT_IRQL: 0

  STACK_TEXT:

  "fffffa60 '043351-8 fffff800' 01f5d1e3: 00000000' 00000000'00000003 fffffa80 ' 07998 000000f4 c 10 fffffa80 ' 07998e48: nt! KeBugCheckEx

  "fffffa60 '043351b 0 fffff800' 01e762c8: fffffa80 '0875b7f0 fffffa80' 0875b7f0 fffffa60 ' 04335 c 20 fffffa60 ' 04335a 40: nt! PspCatchCriticalBreak + 0 x 93

  fffffa60 '043351f0 fffff800' 01eaa190: fffffa80 '0875b7f0 00000000' 00000008 fffffa60'04335 c 20 00000000'00000008: nt! : NNGAKEGL: 'string' + 0x110f6

  "fffffa60 ' 04335240 fffff800' 01c5def3: fffffa80 ' 07998 c 10 fffffa80 ' 0875b7f0 fffffa60 '04335320 fffffa60' 04335c 20: nt! NtTerminateProcess + 0xd8

  fffffa60 '043352-0 fffff800' 01c5e400: fffff800' fffffa60 '04335b 78 fffffa60' 01cbe2ed fffffa60'04335 04335ca 0 c 20: nt! KiSystemServiceCopyEnd + 0x13

  fffffa60 ' 04335438 fffff800' 01cbe2ed: fffffa60 '04335 b 78 fffffa60' fffffa60'04335 04335 ca 0 c 20 00000000'003913 0 d: nt! KiServiceLinkage

  fffffa60 ' 04335440 fffff800' 01c5e2a9: fffffa60'04335 b 78 00000000' 0001cb88 fffffa60'04335 20 00000000'003919 d 8 c: nt! : FNODOBFM: 'string' + 0x2935c

  fffffa60 '04335-40 fffff800' 01c5d0a5: 00000000'00000000 00000000' 003cf8a0 00000000'00000001 00000000' 0001cb88: nt! KiExceptionDispatch + 0xa9

  fffffa60'04335 c 20 00000000' 77ba347e: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x1e5

  00000000' 003912f0 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x77ba347e

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  FAILURE_BUCKET_ID: X64_0xF4_875B7F0_IMAGE_csrss.exe

  BUCKET_ID: X64_0xF4_875B7F0_IMAGE_csrss.exe

  Follow-up: MachineOwner
  Thanks for any help!

  Good job!  I am pleased that chkdsk option included in my post the primary problem solved oiriginal (if only temporarily).  It doesn't sound like your hard drive may be dying (or close very dead).  We should do a complete diagnostic of her test to see what it shows.

  To test your hard drive, check the manufacturer and then get the diagnostic utility of:http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html.  If she failed the test, replace it.  If she passes the test, there's probably nothing wrong with it that can't hold off for a while (but the corruption on the hard disk is a sign that there is something wrong with the hard drive, even if she meets this criterion).

  Csrss.exe crash almost certainly has not caused the problems of corruption on your hard drive - what is much more likely a hardware problem (but the above will be)- and it is more likely that corruption caused the crash.

  I see no harm in installing the fix - although I do not know it will not solve the problem (especially if you aren't really using console applications or it occurs not only when you close).  Yes, it seems to apply to your situation in a certain way and can solve this problem, but I really think that the underlying issue is the hard drive itself.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlueScreen: "a process or thread crucial to system operation has unexpectedly released or ended."

  My computer has a blue occurning screen occasionally (3 times in the last month 2). It reads "a process or thread crucial to system operation has unexpectedly left or came to an end...." "STOP: 0x000000F4 (0xFFFFFA80074DF450, 0xFFFFFA80074DF688, 0 x 0000000000000003, 0xFFFFF80002126CF0) ' after the restart there is no problem (for now) until the next Bluescreen.

  Hello Alkallanar,

  Check the settings of the memory images:

  http://support.Microsoft.com/kb/254649

  Let us know.

  Best regards

  Matthew_Ha

• BSOD: "a process or thread crucial to system operation has unexpectedly released or ended." Startup Repair does not solve the problem-

  I recently had a serious viral infection on my laptop Windows Vista SP2 Gateway.  After you run the antivirus AVG cleaner, who seemed to have had to quarantine or delete some files infected, System I couldn't Boot Windows to the top on this machine - even in the (all flavors of) Safe Mode.  When you try to start, I'd get

  a Blue Screen of Death with the msg of error in the title of this thread.  Before turning off the crash dump, the system indicated:

  ' * STOP: 0X000000F4 (0 X 00000003 0X85F22848 0X85F22694 0X82A26AB0).

  Other messages in the BSOD said I might have new HW causing the BSOD (I did not - but nevertheless I removed all external HW and tried again - got the same result).

  So one of the first things I did was to capture the startup log, so I could see what the pilots were hang up / does not.  Here's what I found:

  (1) the last driver to load (as indicated in ntbtlog.txt) was monitor.sys.  My understanding is that this indicates that when this driver loaded, the system crashed at this place - suggesting that there is 'something wrong' with this particular driver.  However, it seems likely, that I can use the screen/monitor (built-in) to the laptop without problem.

  (2) several drivers do NOT load: they are:

  1 NDProxy.sys

  2 Kvhfjgcv.sys

  3 Kbdhid.sys

  4 i8042prt.sys

  QUESTION 1: "Monitor.sys" being the last driver to load, should I assume this is the driver the system hung up on (that is, which caused the BSOD)?  And if so, that means I should replace this driver?  If so, how do I do that (how and where can I get a copy of 'Clean/good' of monitor.sys)?

  QUESTION 2: Is it possible to get "good versions" of drivers I listed above which was NOT loaded (I guess they didn't not load because they have been corrupted by the virus or the virus cleaner, or maybe just deleted by the virus cleaner because they were infected) to put into the Windows\System32\Drivers folder?  How?

  Here are the steps I took to try to fix the "corrupt system".  I inserted my Windows Vista DVD into the DVD drive and loaded Windows using that.

  Once that came, I then tried the following (and here are the results for all that I tried):

  (1) I selected the option "Repair", then choose "Microsoft Windows Vista" OS and press "next".  He tried to 'attempt to repair' for 15 minutes about, then finally stopped with a message: "Startup Repair cannot repair this computer automatically.  "Details of problem indicated: (a) the problem event name: StartupRepairV2." Signature 01: ExternalMedia; Signature 02: 6.0.6000.16386.6.0.6001.18000; Signed 03:6; Signature 04:131074. Signature 05: 0xF4; Signature 06: 0xF4; Signature 07:0; Signature 08:2; Signature 09: WrpRepair; Signature 10:5; OS version: 6.0.60090.2.0.0.256.1

  (2) I selected the option 'display diagnostic and repair details '.  He said that all tests successful (error code = 0 x 0), and

  then indicated the 'cause': ' unknown error checking: bugcheck f4, parameters = 0x3, 0x88607b80, 0x88607ccc, 0x82a78ab0. "

  - AND -

  Repair action: repair and checking the integrity of system files.  Result: failed.  Error code = 0 x 5

  (3) I checked that the restoration of the system, and even though I know I had some Restore Points created at the origin of this system, System Restore has indicated that there was no restore points to go back, (leading me to believe that the virus must have killed)

  (4) so I chose the selection "Command Prompt", which opens by default "X:\Sources >".  I'm in C: and then typed: "sfc/scannow".  The system has responded with the following messages:

  "Start system analysis.  This process will take time. " follow up 30 seconds later by the message:

  "Windows resource protection could not perform the requested operation".

  MAIN QUESTION: any reflection on what other tools and options I try to repair the windows installation / driver set?

  Hello

  I suggest you follow the steps below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/958233

  Method 2:

  Connect over winre and rename the driver files that he talked with *.old quick order. You can find these % system32%. Follow these steps:

  a. use the Windows 7 DVD to start the computer from Windows Recovery (WinRE).

  b. in WinRE, open a command prompt. To do this, follow these steps:

  On the screen to install Windows, select the appropriate language to install, time and

  currency format and keyboard or input method options and then click Next.

  c. click on repair your computer.

  d. click 7 installation you want to repair, and then click Next.

  e. click on command prompt.

  f. navigate to % system32% and rename old files 8.

  Method 3:

  After step above the computer restarts. Run the System File Checker tool to troubleshoot missing or corrupted system files. Follow the steps from the link:

  http://support.Microsoft.com/kb/929833

• I always get a so-called mistake 'host process has stopped working ".

  I received a message 'host process has stopped working "," image of task has been damaged or has been tampered with', and anothermessage that said something about another process has stopped working (it starts with ss; something), I received these messages for about 2 weeks, at least. Two messages later I get when I try to join another computer to my network. Also when I try to change discovery option is discovered the first message I get all the time. How can I fix it? Or what is caiusing this?

  Hello

  1. don't you make changes to your computer before the problem?
  2 could you post back with the exact error messages?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  http://support.Microsoft.com/kb/940520

  Step 2:

  Put your computer in a clean boot state, and check if the problem is related to a software conflict of third parties.

  http://support.Microsoft.com/kb/929135

  Note: Restart your computer as usual by following step 7.

  Step 3:

  Also done SFC scan and check if the problem is related to missing or corrupt system files.

  http://support.Microsoft.com/kb/929833

• If an illustrator file has links with spot colors, how can I create PDF files with process colors?

  My file has shades of tones that came with the linked logo, I could not find a way to convert those shades of colors quadri.

  I need to send PDF on a printer with only process colors, I know that the printer can choose to convert spot colors to process when printing with printer within Acrobat Panel, but since we do not print, we need to send files to print ready with process colors only.

  Is there a way or a script to make PDF file generated from Illustrator with process colors only?

  You could try object > flatten transparency and clear colors to preserve overprints and Spot.

  I set the preset high resolution and turn on the preview to see if something dramatic is going to happen.

  After that, you can check the file of color dot in the separations Preview Panel.