Com Surrogate "has stopped working" what installation police FTT on C drive under Vista 32 bit?

Last night, I acquired and scanned [for security issues] 3 font TTF files to install in the C:\Windows\Fonts folder as usual.

The first two fonts went fine, BUT the third "Berlin Email schéma" police threw up an error Com Surrogate "has stopped working".

As I said, I scanned the font files before any attempt to copy/install the...

I also ran a complete check & repair on drive C, last night, with no reported errors / bad sectors.

Now, I am running a full analysis of McAfee on my computer - which I doubt will lift up to the top of questions, but I try to be thorough.

Despite Com Surrogate, I have no problem display of media files, or opening files / media such as MP3s and JPEG playback.

Any suggestions? I don't want to run with a fixable problem unless I have to... and I would rather have back the possibility to install fonts for my graphics work [I have about 10 fonts plus the basic package provided by Microsoft, so far, so I'm not clog the system!]

Thanks in advance for any help.

Thanks for the response - in fact, I had tried the 2nd suggestion, after reading the other sons of COM Surrogate. It did not work.

However, in the pack of fonts that I downloaded, I noticed that it contained files of the Foundation as well as TTF versions... Curiosity got to me and police OTF files installed correctly [and work properly in Word and Photoshop] without these errors.

I can only imagine files TTF for 'Berlin Email' to Peter Wiegel variations of police [medium, outline etc.] that are widely available on the net must be correctly written. Although his records from OTF to the same fonts are very good [that are police records I have of other 3rd-party designer-programmers, installed on the same day].

As each disk check, the repair process, scanning and virus check is 100% clean, and all media connectedness files I use work perfectly, I'm 99.9% sure that it was a font error codes file and not any form of operating system error.

So my DEP settings are left on during all programs without exception, and I don't see any more errors.

Tags: Windows

Similar Questions

  • the backup was told that the com surrogate has stopped working I have what to do, I can back up my files on a disc

    I click on start I'm going to the backup and restore, that a window appears which says COM surrogate has stopped working.  It says windows notify me when a solution has been found.  That a window opens for to upgrade me the computer.  The computer is updated.

    Hello

    read the information below

    http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  • COM Surrogate has stopped working... Resources Windows Protection finds corrupted files

    System information:

    OS: Windows 7 Professional 64 bit installation factory

    Antivirus: Windows Defender Antivirus (automatic update)

    All the updates of windows installed

    Question:

    After trying to display several images in a row using "Windows Photo Viewer", I get the following error message:

    "COM Surrogate has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

    Solution attempt:

    Guest ran from the administrator account (start / all the Programs/Accessories/do right click on command prompt / click on "run as administrator / click on 'continue, yes'") and run the command: SFC/Scannow.

    Result:

    Start scanning system. This process will take time.

    Pghase verification of start of system scan.

    Audit 100% competition.

    Resorce Windows protection found corrupt files but was unable to fix some of them.

    details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.  For example C:\Windows\Logs\CBS\CBS.log

    -------------------------

    What should I do now?

    Thank you!

    Hi cedric,

    Thanks for posting the query on Microsoft Community.

    I appreciate your efforts and your time.

    I suggest you to try the clean boot and check if it helps.

    This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in Windows. It starts Windows by using a minimal set of drivers and startup programs.
    How to perform a clean boot in Windows: http://support.microsoft.com/kb/929135

    Note: After troubleshooting, consult this "How to reset the computer to start normally after a boot minimum troubleshooting" section in the link above.

    If the problem persists, try the below mentioned steps that can help you in the matter of fixing:

     
    a. click on start.
    b. right-click on computerand select Properties.
    c. click on Advanced system settings, click the Advanced tab.
    d. in the performance section, click on settings.
    e. Select the "data execution Protection" tab and then click on the option "turn on DEP for all programs and services except those I select".
    f. click on the Add button and look for to C:\Windows\System32\dllhost.exe
    g. click Open, click OK in the warning message.
    (h) click apply and OK.

    I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

  • Equium A300 - error: COM surrogate has stopped working

    I have an error message saying COM suragate has stopped working.
    Any ideas on what it is and how to fix it?

    Hello

    It s the first time someone request for it here in the forum
    I searched the forum but I could not.

    Then, I used google and found this page:
    http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

    There are various possible solutions.
    Looks like DivX and Nero software might cause this error message.

    Check this page for the right solution.

  • "COM Surrogate has stopped working"

    OP: COM Surrogate
    How can I get laughs at the pop up message "COM Surrogate has stopped working '?  What is it???  How should I do?

    Here's the resolution that I found to work for me on Windows 7 Pro 64-bit computer.

    Boot from a live CD and remove dllhost.exe "C:\Windows\Syswow64."

    I did not remove dllhost.exe to the System32 folder.

  • Error message "Com Surrogate has stopped working"

    Original title: popup Windows Com Surrogate has stopped working? What dose that mean? Also computer very slow suggestions?

    This popup comes in at any time and have noticed the computer has been running for extremelyslow. Also Windows will open programs without asking for confirmation. When I run analysis said updates I'm uptodate and the functioning of the system. Any suggestions?

    Hello


    Com Surrogate has stopped working:

    Were there any changes (hardware or software) to the computer before the show?

    Start the computer in safe mode and see if the problem persists. If the issue is not perist in safe mode, and then put the computer to boot and see if the problem still occurs.
     

    Step 1: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.


    Step 2: to help troubleshoot error messages and other issues, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Note: follow step 7 to reset the computer to start as usual after the boot process.

    Computer running extremely slow:

    Perform the steps in the article mentioned below and check if the problem persists.
    http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

     
    In addition, please see the link below for this error:
    COM surrogate has stopped working, how do I start

  • Error when you try to view the image with Microsoft Photo Viewer: COM Surrogate has stopped working

    When I try to post a picture (JPG) with Microsoft Photo Viewer, I get "COM Surrogate has stopped working"

    I don't have Nero or DivX installed, which is what all the forums seem to indicate the cause of the problem.

    Can you suggest anything?

    http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

    The above information on the problem is explained in the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • ' DLLhost.exe / COM Surrogate has stopped working "when I change and save the properties of the network adapter

    That's what I usually get

    Version = 1
    EventType = AppHangB1
    EventTime = 130484980926451522
    ReportType = 3
    Consent = 1
    UploadTime = 130484999275764608
    ReportIdentifier = 563046df-ff59-11e3-8bdd-742f68a03d97
    IntegratorReportIdentifier = 563046e0-ff59-11e3-8bdd-742f68a03d97
    Response.BucketId = 685174449
    Response.BucketTable = 5
    Response.Type = 4
    SIG [0]. Name = name of the Application
    SIG [0]. Value = Dllhost.exe
    GIS [1]. Name = Version of the Application
    GIS [1]. Value = 6.1.7600.16385
    GIS [2]. Name = timestamp of the Application
    GIS [2]. Value = 4a5bca54
    GIS [3]. Name = Signature of Hang
    GIS [3]. Value = 0544
    GIS [4]. Name = Type of Hang
    GIS [4]. Value = 0
    DynamicSig [1]. Name = OS Version
    DynamicSig [1]. Value=6.1.7601.2.1.0.256.1
    DynamicSig [2]. Name = locale ID
    DynamicSig [2]. Value = 1033
    DynamicSig [22]. Name = Signature extra Hang 1
    DynamicSig [22]. Value = 05440983ee821818b723a3a237b2dce6
    DynamicSig [23]. Name = Signature Hang extra 2
    DynamicSig [23]. Value = babf
    DynamicSig [24]. Name = Signature Hang extra 3
    DynamicSig [24]. Value = babf43d786a32c16ae0772c4656c1c3a
    DynamicSig [25]. Name = Signature extra Hang 4
    DynamicSig [25]. Value = 0544
    DynamicSig [26]. Name = Signature of additional 5
    DynamicSig [26]. Value = 05440983ee821818b723a3a237b2dce6
    DynamicSig [27]. Name = additional hang Signature 6
    DynamicSig [27]. Value = babf
    DynamicSig [28]. Name = Signature extra Hang 7
    DynamicSig [28]. Value = babf43d786a32c16ae0772c4656c1c3a
    UI [3] = COM Surrogate does not
    UI [4] = If you close the program, you can lose information.
    UI [5] = close the program
    UI [6] = close the program
    UI [7] = close the program
    LoadedModule[0]=C:\Windows\system32\DllHost.exe
    LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
    LoadedModule[2]=C:\Windows\system32\kernel32.dll
    LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
    LoadedModule[4]=C:\Windows\system32\msvcrt.dll
    LoadedModule[5]=C:\Windows\system32\ole32.dll
    LoadedModule[6]=C:\Windows\system32\GDI32.dll
    LoadedModule[7]=C:\Windows\system32\USER32.dll
    LoadedModule[8]=C:\Windows\system32\LPK.dll
    LoadedModule[9]=C:\Windows\system32\USP10.dll
    LoadedModule[10]=C:\Windows\system32\RPCRT4.dll
    LoadedModule [11] = C:\Windows\system32\IMM32. DLL
    LoadedModule[12]=C:\Windows\system32\MSCTF.dll
    LoadedModule[13]=C:\Windows\system32\CRYPTBASE.dll
    LoadedModule[14]=C:\Windows\system32\CLBCatQ.DLL
    LoadedModule[15]=C:\Windows\system32\ADVAPI32.dll
    LoadedModule[16]=C:\Windows\SYSTEM32\sechost.dll
    LoadedModule[17]=C:\Windows\system32\OLEAUT32.dll
    LoadedModule[18]=C:\Windows\system32\CRYPTSP.dll
    LoadedModule[19]=C:\Windows\system32\rsaenh.dll
    LoadedModule[20]=C:\Windows\system32\RpcRtRemote.dll
    LoadedModule[21]=C:\Windows\System32\netshell.dll
    LoadedModule[22]=C:\Windows\system32\SHELL32.dll
    LoadedModule[23]=C:\Windows\system32\SHLWAPI.dll
    LoadedModule [24] = C:\Windows\System32\IPHLPAPI. DLL
    LoadedModule[25]=C:\Windows\system32\NSI.dll
    LoadedModule [26] = C:\Windows\System32\WINNSI. DLL
    LoadedModule[27]=C:\Windows\System32\nlaapi.dll
    LoadedModule[28]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac\comctl32.dll
    LoadedModule[29]=C:\Windows\system32\apphelp.dll
    LoadedModule[30]=C:\Windows\system32\netcfgx.dll
    LoadedModule[31]=C:\Windows\system32\SETUPAPI.dll
    LoadedModule[32]=C:\Windows\system32\CFGMGR32.dll
    LoadedModule[33]=C:\Windows\system32\DEVOBJ.dll
    LoadedModule [34] = C:\Windows\system32\devrtl. DLL
    LoadedModule[35]=C:\Windows\system32\dot3ui.dll
    LoadedModule[36]=C:\Windows\system32\dot3api.dll
    LoadedModule [37] = to C:\Windows\system32\ATL. DLL
    LoadedModule[38]=C:\Windows\system32\eappcfg.dll
    LoadedModule[39]=C:\Windows\system32\hnetcfg.dll
    LoadedModule[40]=C:\Windows\system32\slc.dll
    LoadedModule[41]=C:\Windows\system32\GPAPI.dll
    LoadedModule[42]=C:\Windows\system32\USERENV.dll
    LoadedModule[43]=C:\Windows\system32\profapi.dll
    LoadedModule[44]=C:\Windows\system32\wbem\wbemprox.dll
    LoadedModule[45]=C:\Windows\system32\wbemcomn.dll
    LoadedModule[46]=C:\Windows\system32\WS2_32.dll
    LoadedModule[47]=C:\Windows\system32\wbem\wbemsvc.dll
    LoadedModule[48]=C:\Windows\system32\wbem\fastprox.dll
    LoadedModule[49]=C:\Windows\system32\NTDSAPI.dll
    LoadedModule [50] = C:\Windows\system32\dhcpcsvc. DLL
    LoadedModule [51] = C:\Windows\system32\dhcpcsvc6. DLL
    LoadedModule[52]=C:\Windows\system32\UxTheme.dll
    LoadedModule[53]=C:\Windows\system32\oleacc.dll
    LoadedModule[54]=C:\Windows\system32\SPINF.dll
    LoadedModule[55]=C:\Windows\system32\WINTRUST.dll
    LoadedModule[56]=C:\Windows\system32\CRYPT32.dll
    LoadedModule[57]=C:\Windows\system32\MSASN1.dll
    LoadedModule[58]=C:\Windows\system32\VBoxNetFltNobj.dll
    LoadedModule[59]=C:\Windows\system32\ndiscapCfg.dll
    LoadedModule[60]=C:\Windows\system32\rascfg.dll
    LoadedModule[61]=C:\Windows\system32\rtutils.dll
    LoadedModule[62]=C:\Windows\system32\MPRAPI.dll
    LoadedModule[63]=C:\Windows\system32\tcpipcfg.dll
    LoadedModule[64]=C:\Windows\system32\DNSAPI.dll
    State [0]. Key = transport. DoneStage1
    State [0]. Value = 1
    FriendlyEventName = Stopped responding and was closed
    ConsentKey = AppHangXProcB1
    AppName = COM Surrogate
    AppPath=C:\Windows\System32\dllhost.exe
    ReportDescription = a problem caused this program blocking interact with Windows.

    chk axelRB response from the link

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/COM-surrogate-has-stopped-working/1c5f897f-bb99-496b-BC58-ab33fb0cd547

  • COM Surrogate has stopped working. I use Google Chrome

    COM SURROGATE HAS STOPPED WORKING RECENTLY AFTER THE INSTALLATION OF GOOGLE CHROME! OR COINCIDENCE... Not sure!  Thank you very much.

    Hi EvaCalif,

    Follow the steps in the link with the similar question and let me know if the problem is resolved.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/errorCOM-surrogate-has-stopped-working-while/3c13ade5-0be0-464c-b677-b28253463fc4

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/COM-surrogate-has-stopped-working/3aacb95b-B72F-4B0E-807a-62b7e7298d4d

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/COM-surrogate-has-stopped-working/71199313-99a1-43fa-Abda-ab44a84bfb6e

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/COM-surrogate-error/0bec0d1c-e0d8-4fed-81F3-910973b14bb7

  • COM Surrogate has stopped working the photo library

    Original title: ken evans
    I have COM surrogate has stopped working in my photo gallery

    Hi kenneth,.

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.vistax64.com/tutorials/76905-system-restore-how.html.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

    If this does not work or you do not have a restore point will come back enough, check out the following article on this error and a few solutions: http://www.howtogeek.com/howto/windows-vista/fix-for-com-surrogate-has-stopped-working-error-in-vista/.

    If that doesn't work, first make sure that Vista is up-to-date on all service packs and updates and then try the new Windows Live Photo Gallery Windows Essentials: http://explore.live.com/windows-live-photo-gallery?os=other who can not only solve the problem, but can improve your experience with her because she is improved and strengthened.

    I hope this helps.

    Gooc luck!

  • COM Surrogate has stopped working problem has caused the program to stop working and windows will close the program

    Impossible to uninstall anything without this message to come. solution is to download the micorsoft updates that are important and I did, and the message always appears

    http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

    Read the info above relating to the resolution of this problem.

    See you soon.

    Mick Murphy - Microsoft partner

  • Message: "COM Surrogate has stopped working"

    When I try to open a folder, my system generates a message "COM Surrogate has stopped working". How can I solve this problem?

    Download http://www.nirsoft.net/utils/shexview.html
    Disable all non-microsoft shell extensions (to explore) and reactivate a
    by so this can help.
     
     
    --
    ..
    --
    "sijuvdas" wrote in message news: 0bdc15e0 - 6b 08-450 d - 922 a-2f0c26f92bcb...
    > when I am trying to open a folder, my system generates a message 'COM '.
    ' > Surrogate has stopped working ". How can I solve this problem?
     
     

  • Error: COM surrogate has stopped working

    Original title: I have a message appeare when I start to open any file that is the message... COM surrogate has stopped working
    the programe COM surrogate has stopped working

    http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

    Read the above info.

    See you soon.

    Mick Murphy - Microsoft partner

  • Error: "COM Surrogate has stopped working" while looking at pictures in Windows Photo Viewer

    Original title: the window picture viewer does not

    Windows Photo Viewer seem hangs (not responding) after some reversal if image file in an image folder. Try to complete the Viewer by using task Manager, error popup saying com surrogate has stopped working. Windows 7 can not even stop after that. I have to do a hard reboot.

    It seems functing fine, until I uninstalled Mcafee Security Center, ran a program of removal of Mcafee, Development and installed kaspersky internet security 2011.

    Have someone faced this problem before?

    Need your advice.

    Try this. It worked for me. So far, the question has not returned.

    In command prompt type each separately and press on enter after each. It is the reinstatement of the .dll

    regsvr32 vbscript.dll
regsvr32 jscript.dll

  • COM Surrogate has stopped working suddenly?

    I had my PC Windows 7 Home Premium 64 - bit since March, 2012.

    Tonight, October 17, 2014, I started getting an error "COM Surrogate has stopped working" pop up, all the time, for no apparent reason.

    I can not play with Windows Media Player AVI files without this message and ALSO a message that WMP has ALSO stopped working.

    I can't play AVI files in right click on the video and using 'Play with WMP Basic' without also getting this message as soon as I do a right click.

    I don't know if it's related, but since YESTERDAY I can't load YAHOO! in Internet Explorer. The page will simply not load, so I can't check my email official, formal and work-related.

    Chrome works very well, so I CAN access YAHOO! my general, leisure, pleasure and e-mails related to the game.

    I always allow upgrades of Windows, so I don't understand why it started to happen out of the blue.

    I have a current Antivirus with BitDefender Total Security and perform regular maintenance.

    Any suggestions on a fix for this?

    Thank you very much

    (Moved to programs)

    The first error points to the ffdshow.ax:

    Fault Module name: ffdshow.AX
    Fault Module version: 1.3.0.0
    Module Timestamp error: 53aedcb1

    The second error points to the avformat-lav - 55.dll:

    Fault Module name: avformat-lav - 55.dll
    Fault Module version: 55.43.100.0
    Module Timestamp error: 00029000

    The ffdshow.ax and avformat-lav - 55.dll can be components of a pack of codecs such as the K-Lite Codec Pack.

    Codec packs are / are installed?

    You can uninstall the codec packs and see if the error resolves?

Maybe you are looking for