COM3 is not installed. Driver is not found online.

Similar Questions

• IP address wireless printer not found online

  I have a HP 4630 while a printer installed wireless.  It has worked fine for 3 months.  4 days ago I could print wireless from all my computers without problem.  Now, I can't.  After more than an hour of troubleshooting - all unplug, disconnect and then reconnect to my network, etc. I still have the same problem.  The last thing I tried to type the IP address of my printer in the web browser.  I get a message 'Oops, can't find.  Can someone help me with this?  I did not change anything - it does not work all of a sudden.  Weird... Thanks in advance!

  Although the printer is not loss of connection to the network, have you tried the steps in the document? A step in particular may be more useful, I think that to leave the router on and unplug and do the same with the printer, and then close the two computers could help. After a minute, plug in the router, plug the printer into after the router starts up, and then turn on computers. I think there may be something blocking the connection.

  You could certainly share the printer, but if the question is somewhat related to the network, a new printer will not solve the problem.

  Keep me posted. Thank you.

• Satellite L500 (PSLS0E) - HARD drive not found when installing Win7

  Hello!

  I wanted to install a new Windows 7 (without recovery), but the hard drive was not found during installation. In the start instead menu I can find the drive. So what I need is a driver. But I have no idea where to get one! Can anyone help?

  Version: PSLS0E-06T01KGR

  THX

  Now maybe stupid question but are you using the original installation disk Microsoft Win7?

  I installed Win7 on several different Toshiba laptops (old and new) and HARD drive was visible every time. I deleted existing partitions, created a new and correctly installed Win7 on it.

• laptop HP pavilion touch 14: replaced defective hard drive with pre installed OS on new HDD - device not found Boot (3F0)

  Hey guys,.

  I have a pc hp pavilion touch laptop 14, which has been having a defective hard disk that the operating system was not start and the system test indicated that the hard drive contained errors.
  
  I replaced the hard drive with a new one and before installing the hard drive I formatted with a win installation 8.1. I thought the laptop would just start normally to win8, but gave me a screen saying:

  boot device not found please install an operating system on drive hard drive (3f0)

  The hard drive is new and I did not not how its gives me this error!

  In addition, this laptop does not seem to boot from a cd to format!

  Any ideas?
  
  Thank you
  Karl

  Hey BHK6,

  I found out what was wrong! It was so simple!

  I just need to make the boot inherited from the bios, like that he started directly from the hard drive and does not need of any software pre installed HP to start.

  Thanks for your help anyway

  Karl

• Satellite P200-1EE - hard drive not found if I try to install XP

  Hi I have a problem.

  I recently bought a Toshiba Satellite P200-1EE laptop computer series (of all things) running Vista and nothing else problems so im trying to install XP Professional and crush Vista.

  But whenever I try to install it says "disc not found... no access to.
  I heard about such problems before something as a "block of software Protocol.

  Any suggestions?

  Hello!

  Why you n t search forum before starting a new topic?
  I mean you will find hundreds of discussions on this question here in the forum and you will find the solution to your problem in a few minutes.

  Well, the reason for this is because you need the SATA drivers before installing Windows XP. As far as I know that your laptop is equipped with an Intel chipset and so you have the Intel Storage Manager. You can integrate the drivers of external floppy drive or nLite [www.nliteos.com]. In addition, this document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  If you have any other questions, please use the forum search!

  Good bye

• Not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system

  HP Pavilion Dm1 4000au, windows 7 Home premium 32-bit, error: not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system diagnostics, how do I 3Fo system to be installed my notebook/laptop...please help me...?

  If F9 does not run the diagnostic, then most likely to replace the hard drive.  Once the new drive in place, start the recovery DVD series that was made when the PC was new.  If you do not make them, or they are lost, order a new set of HP.

  See here: http://support.hp.com/us-en/document/bph07143

• my lap top says device not found Boot please install an operating system on your hard drive

  I was on yahoo and page froze. I hit ctrl/alt/del and nothing happened. Then, I hit ctrl/esc. I now have a screen saying device not found Boot. Please install an operating system on your hard drive. hard drive (3FO) what hurts? It is a Compaq presario CQ56-112 NR computer laptop Windows 7

  I suggest go on the link following and through the listed troubleshooting steps based on your symptoms:

  http://support.HP.com/us-en/document/c01443371

• Hard drive not found - installing WXP on Equium P200

  Dear all

  I have an Equium P200 with Vista. I decided to remove vista and install windows XP. I put the XP and it goes through a verification process, I guess. At the end of the audit and after I pressed the button to install XP, I get the message "hard drive not found on this computer. Help me with as I want to install XP, my laptop?

  Concerning
  REDA

  The XP operating system could not find the HARD drive because you have not installed the Intel Matrix Storage Manager.
  It is a SATA driver is needed t install the XP.

  During the operating system installation process, you will need to press the F6 key to include the external USB FDD drive SATA driver.

  It you don t have a USB FDD drive then nLite software could be a solution.

  PS; Search this forum for similar topics, because this has already been asked several times

• not found boot device. Please install a drive of system.hard of operation (3FO) past all the hard drive test

  not found boot device. Please install a drive of system.hard of operation (3FO) passed all the test drive I get this message after the recovery disc 1 stops at 36% and tells me to put in disk 2, I just discovered that my grandson was trying to help me by resetting my computer from factory settings off he thinks about 27% complete , it is only 8 and just trying to help this computer is only a few weeks was a Christmas gift its my fault for complaing about windows 8, can someone help me please thanks in advance

  I solved this problem myself thanks all syudents there to post what you've tried I went to bios and disabled the startup enabled legacey mode sucure tried to go to the Boot Manager it was my boot devices tried to use recovery disc recived the same message I have reset to factory settings and was able to reinstall windows normally

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• Windows could not install your (CEWL 1) not found driver software for your device

  After you download sony_tvupdate_2012_1158_ucf_auth

  A new folder will be created called sony_dtv026000066006_00000301

  Inserted UWA - BR100 and received the following:

  Windows needs to install driver software for your (CEWL 1)

  Locate and install driver software (recommended)

  C:\Windows\system32\new dev.exe

  Windows could not install your (CEWL 1)

  Check the support section for driver software

  Insertion of USB causes the following message: not found driver software for your device

  Hello
   
   
  I would suggest trying the following methods and check.
   
   
  Method 1:
  Tips for solving common driver problems.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems    
   
   
  Method 2:
  Download the driver on the device manufacturer's website and install on your computer by keeping the computer in a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

   
   
  You can also refer to:
  Update a hardware driver that is not working properly. http://Windows.Microsoft.com/en-US/Windows-Vista/Update-a-Driver-for-Hardware-that-isn ' t-work properly

• HP Pavillion l 17-g192dx: not found boot device, please install an operating system on your hard drive.

  ProdID:V0Q01UA #ABA

  Hello, so I performed a reset that restore my computer to factory settings, I have chosen to erase all files. I've done this before, and everything went well. What was going on, it was my disc useage was at 100% a lot and that something was wrong with my computer then I factory reset it. While the factory reset is 44% in "resetting your computer" and the next thing I knew I had 2 options, stop or start with advanced options. Well, I chose to stop it, 5 minutes later, I turned it back on and I ran a SMART check has no that was the ID # 9367LW-86J89N-MFPX7G-60BR3 followed by the product id that is shown above. He said that when I start to Boot Device not found, please install an operating system on your hard drive. Followed by the hard drive (3FO), I can only click f2 and it gives me the link to visit the Help Center. The computer saying that it did not have an operating system was not the first alert, that I had, it was something else saying there was an error of hard disk which then became not having not not an operting system. I tried to go to f11 and go in this way, but regardless of what it always comes back to the screen that shows the found boot device, please install an operating system. Help, please! Thank you. in advance.

  He was sent to HP they will solve this problem, my warrienty coverd.

• Webcam driver installed, windows search pilot, driver not found

  I recently changed from windows xp to vista, I bought a new webcam (philips SPC 230NC easy) and installed the accompanying cd. When I plugged the camera that a box appears in the lower right of the screen (install the software) it says not identified found device and promtps get me online software driver, but then can't find. my device hardware ID is USB\VID_093A & PID_262C & REV_0100 & MI_00

  The signature of the said problem as PnPDriver not found.  Also it is sometimes this INF file not found or something, error 409

  What happens on my laptop and desktop, any help much appreciated

  Hello
  
  1 did you encounter any error messages during the installation of the drivers?
  
  Method 1.
  I recommend you to download the drivers from the link below and check.
  http://download.P4C.Philips.com/files/s/spc230nc_00/spc230nc_00_pvt_eng.zip
  
  Method 2.
  If the error persists, remove all the drivers and the software for this device, and then reinstall.
  See the link below on the manufacturer's Web site.
  http://www.P4C.Philips.com/cgi-bin/dcbint/faqview.pl?CTN=SPC230NC%2F00&DCT=QAC&new_tmpl=1&refdisplay=WEBCAM_QAC_61090&refnr=0061090&scy=GB&SLG=Eng
  
  For more information, see the articles below.
  Installing new hardware: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-new-hardware-recommended-links
   
  Demo: Find drivers for your hardware
  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-update-your-drivers-automatically
   
  Looking for drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• C: drive is not found when installing Vista

  I am trying to reinstall windows vista on my computer, but it says there is no driver found? my C drive is not found

  How to do a clean install:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Installed the new hard drive - now "OS not found"

  Hi, I recently installed a new hard drive in my laptop because the old hard drive was dead. So, I installed the hard drive and I am now installing the operating system using the Dell disk I received with my laptop. This is for the 32-bit window Vista and it says it should be used for re-installation of Vista. It was in a sealed envelope - so it has never been used.

  When I start the laptop and insert the disc, it just says: operating system not found.  I made sure the cd drive is the first in the startup list.  I also put the drive into another laptop and copied the files on a USB key.  Then tried to install it on the USB. No luck.

  I have run the system diagnostics, and it says that my hard drive and cd drive are recognized and functioning.

  The dell cd drive is not bootable?  Thanks in advance for your help.

  I was able to fix this on my own. It turns out that one of the files has been altered I discovered once I was finally able to get it to boot from a USB device.  I found the one window Vista installation disk other that I have with another computer laptop and used that. Worked well.