Combining results of the previous steps in digital test

Similar Questions

• Remove additional results of the previous step

  Hello world

  I have a step of the 'statement' (step 1) inside a while loop that creates an additional result to the stage (using Step.AdditionalResults.CustomResults.Insert).  For each row in the While loop this 'statement' step will create a new additional result.  After step 1, I want to delete the additional result created in step 1.  If I don't delete it, after each loop my report file will include all previous results additional loop.

  Is there a way to remove the additional result created in step 1?

  Thank you very much!

  Review the attached file in sequence.  Why don't you just use the same result?  Why do you need to insert and remove every time?

  Can you send me this sequence you sent the screenshot?  This way I can get a better feel what you are doing.

• Where are the result of the seq steps?

  Hello

  I'm calling a sous-suite that has a lot of steps.

  Now, I want to find (in the RunState... variable) the result of certain stages in the same sequence (not the MainSequence).

  There is a dedicated line for the previous step (which is excellent), I would use a similar one for the other steps.

  Thank you

  Rafi

  I think you can use the name of RunState.Sequence.Main ["Step"]. Result for the results of all the steps.

  Thank you

• Move to another frame as a result of the previous

  Hello guys, once again

  Just another question - is it possible to go to another frame as a result of the previous comes. For example, if I have a photo posted on frame 1, I want to keep referring to the. So in part 2, I create a button that goes back to frame 1, also I do the same in 5 and 6 frameworks, there are 3 images that return to section 1. I want then to frame 1 of each of the individual frames based on the one you have just returned. Thus, for example, so I came back 5 frame to frame 1, I wish back to frame 1 in section 5, by pressing another button. The same button should then return you frames 2 and 6 respectively based on what image you just came (2 to 2 and 6 to 6). Is this possible or am I barking the wrong tree and I'm going to have to make several images with the same image and change the action for the button script?

  See you soon,.

  Chris

  assign a variable to store the previous image and use this variable in your image 1 button:

  section 1:

  {returnBtn.onRelease = function ()}

  {if (previousFrame)}

  Stop (previousFrame;

  }

  }

  your other executives:

  previousFrame = this ._currentframe;

• How to return to the previous step in a workflow to void?

  We call a workflow under an approval action in a main workflow. In the child workflow, we have 9 steps. If at any stage in the child (other than the first) workflow user rejects action, workflow control should return to the previous step in the child workflow itself.
  
  We have added a custom action in the output of all stages of children workflow events. This is the logic of the output of step 4 of the child workflow event. A similar logic is there for every step of the workflow of the child.
  
  < $if wfAction and wfAction as "REJECT" $>
  < $wfSet ("wfJumpTargetStep", "Step3@childWF") $>
  < $wfSet ("wfJumpEntryNotifyOff", "0") $>
  < $endif$ >
  
  With this code when the user made the rejection of the child workflow action, it takes us back to the main workflow and not to the previous step in the child workflow.
  
  This approach is correct?
  
  -Pratap

  1 3 events are input, output and set to date.
  2. rejects arrives in the area to update but you can not reliably respond it because to reject it, he leaves immediately (don't not through the exit event).
  3. the rejected content goes to the rear in the workflow step by step (even going back to the main workflow in a workflow sup) until he finds a step that has valid editors (not only reviewers).
  4. If it does not find a Publisher he goes all the way back to the step of automatic Contribution at the beginning of the workflow and is in a kind of no mans land until the donor (or an administrator) will and approve it again.
  5. to check if something has been rejected to the input of an editor event stage BEFORE the stage where it is rejected needs to have the code to check the status of rejection.

  The workflow under should be able to capture dismiss it as you wish. All the steps in the child are steps only workflow (workflow sup)? Or maybe the people in the steps do not have RW access to the document? This is what I would predict with your described symptoms.

• call run params in the taskflow with the results of the previous run

  I have a requirement to call the executeParams on the object from a point of view after the execution of the executeparams on another display object in a taskflow. I'm able to pass the variable to the view object binding 1 of taskflow input parameters. But variables bind to the view of the second depends on the results (current line, it returns only one row) execution of view 1st in the taskflow.
  
  How to bind to the 2nd display performance variables in the taskflow according to the results of enforcement of 1 view. The second point of view expects 2 parameters of the current line of the 1st viewiterator.
  
  Taskflow definition:
  
  ----------------------
  
  executeWithParams1stView-> executeParams2ndView-> .jsff
  
  
  The page definition for the second executewithParams with links, I configured. But the following returns no results of the 2nd iterator. But if I pass values hardcoded for the NDValue I get the correct results.
  
  
  < action IterBinding = "AgencyPoliciesIterator" id = "ExecuteWithParams" RequiresUpdateModel = "true" Action = "executeWithParams" >
  < NamedData NDName = "bPolicyNum".
  NDValue = "${data.renewal_policyterm_taskflow_renewal_policyterm_taskflow_ExecuteWithParamsPageDef.PolicyNum.inputValue}" "
  NDType="oracle.jbo.domain.Number"/ >
  < NamedData NDName = "bAgencyNum".
  NDValue = "${data.renewal_policyterm_taskflow_renewal_policyterm_taskflow_ExecuteWithParamsPageDef.AgencyNum.inputValue}" "
  NDType="oracle.jbo.domain.Number"/ >
  < / action >
  
  
  Thank you and best regards,
  
  S R Prasad
  
  Published by: oumar s Prasad on November 10, 2010 13:36

  Hello

  I don't know exactly what the problem with your application, but maybe you could try to create a method in the application module impl.
  If I understand correctly, you must run the firstVO as soon as the taskFlow is called and based on the line returned by one, run the secondVO.

  You can do this with a method in the ApplicationModuleImpl. I created an example:

  public void executeViewObjects(Number managerId){
      if(managerId!=null){
        getDepartments1().setNamedWhereClauseParam("inManagerId", managerId);
        getDepartments1().executeQuery();
        Row dep=getDepartments1().first();
        if(dep!=null){
          Number departmentId=(Number)dep.getAttribute("DepartmentId");
          getEmployees1().setNamedWhereClauseParam("inDepartmentId", departmentId);
          getEmployees1().executeQuery();
        }
      }
    }
  

  If you expose this method and drop in your taskFlow you can map it is the input of the taskFlow parameter input parameter.

  Gabriel.

• How do I report the results of the previous record to the next record in a query

  Hello

  For example if I have data of the table as.

  AC_CODE DATE CREDIT DEBIT

  ----------------------------------

  1001 15 APRIL 15 10

  1001 APRIL 25, 15 2

  1005 5 APRIL 15 100

  1005 8 APRIL 15 25

  ----------------------------------

  And I want to train as below, where, BALANCE = (previous record BALANCE) + CREDIT - DEBIT

  (assuming that NVL (, 0) for all columns)

  (assuming the BALANCE reset after change of AC_CODE)

  DATE AC_CODE CREDIT DEBIT BALANCE

  --------------------------------------------

  1001 15 APRIL 15 10 10

  1001 APRIL 25 15 2 8

  1005 5 APRIL 15 100 - 100

  1005 8 APRIL 15 25 - 75

  --------------------------------------------

  (AC_CODE ORDER, DATE)

  Of course, it can be reached using query of database function.  My question is, is it possible by using a query without involving all functions.

  Thank you

  -Anand

  Model clause could help you meet this goal...

  Note: There is a separate area for SQL, PL/SQL issues here in OTN and don't forget to provide insertion, create scripts for your sample data for a quick response

  with t as(select 1001 AC_CODE,to_date('15-APR-2015','DD-MON-yyyy') dt,10 credit,null debit from dual union all
            select 1001,to_date('25-APR-2015','DD-MON-yyyy'),null,2 from dual union all
            select 1005,to_date('05-APR-2015','DD-MON-yyyy'),null,100 from dual union all
            select 1005,to_date('08-APR-2015','DD-MON-yyyy'),25,null from dual
          )
      select ac_code
            ,dt
            ,credit
            ,debit
            ,balance
          from t
          model
              partition by (ac_code)
              dimension by (row_number() over(partition by ac_code order by dt) rn)
              measures (dt,credit,debit,0 as balance)
              rules
                  (
                      balance[any] = nvl(balance[cv()-1],0) + nvl(credit[cv()],0) - nvl(debit[cv()],0)
                  )
          ;
  

• Pages: Open Office has a checkbox option to return to the previous step, such as get back a deleted row. Y at - it such an option with Pages?

  Open Office has a verification option to bring back a deleted word or a line. Y at - it such an option with Pages?

  Raymond,

  Try using the hotkey (⌘Z)

  

• PLANING: Select new week / tabel combines results

  Hello!

  I made it simple for you! In the map below (SHEET 1) I did a week plan, but he does not remember the results of the previous weeks. I thought of a solution, but I'm not very good. Can you help me? :))

  / My thought is: if I have another worksheet (such as sheet 2) so that it can store my results.

  I would like to 'select week', sheet 1 and store the results of "DONE (THIS WEEK) ' in sheet 2.

  SHEET 1

  MY PROJECTS	[SELECT WEEK]
  RESULTS AND GOALS - 19. APRIL
  PROJECTS	DONE (THIS WEEK)	GOAL (THIS WEEK)	(TOTAL)	OBJECTIVE (TOTAL)	UNIT	% THIS WEEK	% TOTAL
  PAPER	2	4	0	60	pages	50%	0%
  BLOGGING	1	5	0	25	messages	20%	0%

  SHEET 2

  	MY PROJECTS
  	WEEK
  PROJECTS	WEEK 11	WEEK 12	WEEK 13	WEEK 14	WEEK 15	…	TOTAL
  PAPER	[AUTO FILL: (THIS WEEK)]						0
  BLOGGING							0

  Best regards Mathias

  Hi Mathias,.

  Could be possible, but not by the worksheet only if you hope to treat the upper table as a form empty reusable.

  The color black table two format, it is difficult to determine where on the table (ie. Address cell) each displayed value appears. The color palette may be ideal for your ultimate goal, but it is quite detrimental to the development of the document. Use the default colors of a new table at this stage numbers. When all the plumbing and wiring is running, it's time to apply the paint.

  On the upper table:

  It took a study to determine (correctly, I hope) that the red numbers are associated to "DONE (THIS WEEK)" and not with "GOAL (THIS WEEK), etc.»

  I guess the top table is a record for 'Week 11', but I don't see any indication on the table that it is correct.

  What values on the top table are entered? Who are they calculated?

  On the coffee table:

  Is the space marked "[AUTO FILL: (THIS WEEK)] ' a single cell?

  What the value of (or calculated from) the upper table is to go in this cell (or cells)?

  I think you want here, "2" by "1" below.

  All numerical values in this table must be calculated, even if the calculation I have simply a search to retrieve the value of the top table.

  Once we have a better idea of the small jets, you should begin to receive a few more practical answers. At present, there is not enough information.

  Kind regards

  Barry

• Fix the activation parameters for caching the results of the customer? No performance gain

  I gathered and made every detail I could search. I use Oracle EE 11.2 g 32-bit on Windows 7 64 bit
  
  But despite I activate client caching result, I see no difference response API despite I have remote, connect to the server on LAN 1Gbit network
  
  I see > difference 1 sec only when you enable caching of server (2nd opening files 300% faster 57 dry-> 18 s) and 32 MB are cached for the opening.
  I don't know how to see the client_result_cache except the network traffic, detours, IO
  MEASURES_
  * 1.* I activated the parameter setting Statement Caching on the client and dbhome and set it equal to my ora.ini file OPEN_CURSORS (300) the registry as possible. And rebooted the system, of course.
  ---------
  HKEY_LOCAL_MACHINE > SOFTWARE > Wow6432Node > ORACLE > KEY_OraClient11g_home1 > OLED > StmtCacheSize
  HKEY_LOCAL_MACHINE > SOFTWARE > Wow6432Node > ORACLE > KEY_OraDb11g_home1 > OLED > StmtCacheSize
  -There is no standard oracle registry dir - probably cause its 64 bit +.
  -* 2 I have Super-activated all relevant SYSTEM parameters. 3 X the size necessary to be cached, FORCED cach, 100% of the result, 600000ms lag(10min)
  -------
  client_result_cache_lag... large integer 600000
  client_result_cache_size... great integer.100M
  ...
  db_cache_advice... chain... WE
  db_cache_size... large integer 0
  ...
  ... full object_cache_max_size_percent... 10
  ... full object_cache_optimal_size... 102400
  ... full result_cache_max_result... 100
  result_cache_max_size... big integer.100M-this is for caching wright + server
  result_cache_mode... chain... FORCE
  ... full result_cache_remote_expiration... 30
  session_cached_cursors... around... 50
  -Is everything OK? Why not better time response then?
  The LAN 1Gbit 1 customer is perhaps too fast anyway, and I should try via internet or something?
  
  Hope that you have an idea, I can't search to find or think of something.

  As said by John, SQL * Plus does not implement caching the result to the client. You write an application for OIC (or another application that knows the OIC calls appropriate to make) that implements the setting cache the result of the customer.

  Your test is behaving as expected.

  Justin

• What happens after the full download? I don't see a program, an icon, or the next steps...

  What are the next steps for open test software after the Download Assistant has been installed?  No instructions for the next steps!

  Biggly2000 try to download a new copy of products download Acrobat installation files | Standard, Pro | XI, X.  You can install the software in trial mode.

• How to store the results in several digital Test

  My VI returns two double individual (not in a table), output power and frequency

  I am configuring a multiple digital test in TestStand but struggling to store readings.

  Using the following, I get an error.

  Output power of VI: Step.Result.Measurement ["Measurement 0"]. Data

  VI output frequency: Step.Result.Measurement ["Measurement 1"]. Data

  Would appreciate some advice.

  Thank you

  Got, it works

  Results were to be stored in Step.NumericArray [0], Step.NumericArray [1] and not Step.Result.Measurement ["Measurement 0"] as I've had.

  Thank you

• How can I take several consecutive steps of a frequency meter and keep the previous measure?

  I'm sorry, I'm very new to view lab and I am taking several consecutive steps of a frequency counter. I place the sub measures VI and the indicator with a loop and then set N to the number of iterations. The problem is that I don't get a box in my display board when I need all the previous measures taken for this iteration. Thanks for your time.

  Your data inside the loop to an object outside the loop of the wire. Right-click on the tunnel and turn on indexing. You will have a 2D array (if your data was in 1 d) where each row (row or column, you will need to understand) is the result of the iteration.

  You can separate the 2D table by using the Index of table vi.

• The value Post step Expression (no next or previous step)

  Is it possible to define the term post to a step, which is not the next or previous step?

  I know that it is possible

  RunState.NextStep.PostExpression = "Enter Post here"

  I'm looking for something like

  RunState.Step ("StepID"). PostExpression = "Enter Post here"

  Does anyone know if there is a way to accomplish something in this direction?

  Thank you!

  RunState.Sequence.GetStepByUniqueId ("ID"). PostExpression = 'Blah '.

  Hope this helps,

• I have a problem with the previous results of LEDs and indicators of compensation

  I'm working on a proper VI for my building project, but there is a problem... The project here is to define the occurrence of the error and the error type to decide what actions are required to protect the circuit. This isn't a problem here...

  The problem is when I run the VI for the first time... Everything is good and I got what I need... But when I run it after that... The new results to come out with the results of the first round... So my problem is with the previous results of LEDs and indicators of compensation

  Hope my question is clear and not confusing

  Well, show us a code instead. How do you call the VI?

  Have you tried the option: "properties of the VI... run... clear the flags when called?