Combo DVD - RW drive won't burn a disc

Similar Questions

• My DVD - RW drive won't read any discs of all kinds

  Original title: Please help me with my cd/dvd!

  I have a laptop HP Compaq 6735 s with a Xp Sp3 system and I have problems with the Sony optiarc DvdRw AD7561S dvd, he doesn't read any type of disc (Cd and DvD new or original or burned), anyone have a suggestion for me please?

  Hi FabrizioBazzani,

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• My CD drive won't burn

  My CD drive won't burn a cd, it will try to burn them and then writing on the cd it says: an error has occurred. How can I solve this problem?

  Hello

  1. What is the full error message you get?

  2. what type of disc you are trying to burn?

  3. when the problem started?

  4. have you made changes on the computer recently?

  I suggest you try the fix it from the link given below and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope this information is useful.

• CD drive won't burn dvd or read burned dvd but will play store bought dvd

  TSSTcorp cd/DVGW-ts-h652m ata device, it's my player to cd for some reason, I can't burn cd/DVDs, but the reader will read these and play them, also it won't read burned DVDs, Noah he reformatted dvd, how can I solve this problem

  Hello

  Have you tried to close all programs and then insert the disc in the drive?

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you have to write on the side outside their tolerance. They can be given
  However, it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

  The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

  We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

  The specifications of the laptop are:

  HP Pavilion dv7

  Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

  4 GB OF RAM

  64-bit Windows Vista

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Equium L40 DVD Multi drive - do not burn files to DVD

  Hello

  Whenever I try to burn files to DVD discs using my dvd/rw drive, it holds in check the same point and comes with the invalid 'MS-DOS function' error. CDs write very well that it's just the DVD.

  Please could someone help with this problem?

  Equium L40 series
  Vista operating system
  My * a DVD-RAM UJ-850 s

  Hello

  What burning software did you use?

  I use Nero, and I've never had any problems!

• DVD-ROM drive won't read DVD

  I have this CD/DVD which will play normal CD but will not play any DVD (DVD + R, DVD-R). I noticed that the DVD would not work when I was a BONE

  RESETTLEMENT. I put in my Windows XP restore disc, and installed successfully. Then I put in my drivers disk that was on a DVD-ROM drive and it wouldn't work!

  I could hear the spinning, but it sounded abnormal, and nothing appeared in my computer. Not open same AutoPlay. Frustrated, I decided to get the drivers of

  sites of different manufacturers, including the driver of CD-ROM to see if I could start the DVD. Even after that I installed the drivers for the hard disk, DVD will not play again.

  Any ideas?

  Hello
  I suggest you run the fixit and see if it helps:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  It will be useful.

• DVD/CD driver does not properly, the discs are not read.

  I tried different discs and none are read which is very annoying, because I can not install my new printer! When I checked the driver, the following message is displayed:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I click for solutions and he's looking for a few seconds and then nothing happens. I tried it 3 days ago and still today, but it still does not work, can I do?

  Thanks in advance for any help

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• dvd/cd HL dt st gh15f drive won't burn CDs

  This DVD/CD player provided with my Acert AX1200-ED5200A desktop computer.  The CD/DVD drive will burn DVD but stopped buring CD - however, she plays a CD.  If you insert a blank CD into the drive, it freezes the computer and any program that you use to burn the CD.  I tried to uninstall and reinstall the player - who has not worked.  I looked for new drivers - it has the most up-to-date.  Any ideas?

  Hello Daisiemazy,

  ·         Remember to make changes to the computer before having this problem?

  I suggest that you run by following the below Fix - it. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD drive won't burn DVDs

  I have a laptop DV2000 and although the DVD Player reads and plays CD and DVD it doesn't burn a data DVD.  The properties of the driver are so-called "working properly", but I lost many DVDs trying to burn playlists to itunes.

  It could be as simple a problem that do not use white to DVD quality. Learn more about best drives to http://www.digitalfaq.com/reviews/dvd-media.htm

  I suggest Verbatim or Taiyo Yuden discs only.

• DVD drive won't burn CDs?

  I can't copy of CD. I tried to copy an audio CD by using Windows Media Player 10 and Sonic Record now Toshiba, but at the same time produce an error towards the end of the combustion process.
  I reinstalled the driver DVD and reinstalled Windows Media Player, but these measures are not addressing the problem.
  Someone at - it other suggestions that might help?

  Thanks in advance, monkey

  Hello

  Try to remove the preinstalled software from Sonic and use Nero. I used Nero on many models of different laptops without any problem.

• s parts, DVD, cd but DVD drive won't burn does not recognize any cd loaded into it?

  

  I want you to try the upper and lower filter thing (link below). Often, this fixes the problem with DVD burners recognizes only not DVD discs.

• my media player won't burn a disc. It gets about thirty percent through, and then stops

  I tried to burn a CD of mixes for my friend, and I got music files lined and ready. I put the blank CD - RW disc in and hit burn. It takes about thirty percent before it stopped, whenever I tried, and I even switched to a new drive and had the same results. I really need to make this CD, but I don't know why it does not burn.

  I tried to burn a CD of mixes for my friend, and I got music files lined and ready. I put the blank CD - RW disc in and hit burn. It takes about thirty percent before it stopped, whenever I tried, and I even switched to a new drive and had the same results. I really need to make this CD, but I don't know why it does not burn.

  =================================================
  A mix CD seems to indicate that the files can be
  various sources.

  Apparently, one or more of the files are causing the
  issue. Might be interesting to try to delete the files in a
  at a time and try again until you identify the problem
  file/s.

  Another alternative would be to copy all of the files
  to a new folder in your music folder and convert
  a different format... it would create new
  versions of the files that could burn successfully...

  There are to many converters available on the net...
  Some are free - some details... the following freeware
  is but one example. :

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your files music on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your audio files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your music files are imported into Freemake,
  On the left, click on the WMA icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  That should do it...

• CD/DVD device driver not loading / use / recognition discs when inserted (Code 19)

  Here is an explanatory text, but the question is how is it resolved?

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Why windows 7 won't burn a dvd Iso or even video file for me?

  I use the cyberlink dvd software that came with my windows 7 PC, but it won't burn a disc for me at all. Be it an ISO or video file is there anything I can download to address and solve this problem? If so, please link me to the top.

  I do not think that the program burn ISO (if you double-click on an ISO), thing of ISO of windows 7 should appear. Then you can burn it. I do not think that it burns DVD either t - it. He plays the

  Use DVD maker, which is part of Windows 7 (that's if it can load the video format you have)