Comenting code - style - how to keep coments anywhere - without the help of sequences

Similar Questions

• How to copy DAQmx task without the help of MAX?

  Howdy-

  I hit a bit of trouble here I think points to a fundamental misunderstanding I can have on DAQmx channels and tasks.  I can hack together a workaround, but I would like to know how to do these things, common sense.

  In a Word, I prefer to do everything in the code and not use MAX.  For my application, I would like to create a single channel/task initialized with all the scaling, the physical channel parameters and units (it is what is, in my case, a 'channel').  I would then like to create copies of this channel/task and configure each with parameters of specific task of sampling... corresponding to what I would call the "tasks" to use "Channel".

  I'll have no chance, so of course, I do not understand what I do.  Any reading/posts I've met use MAX.  Here's what I've tried so far:

  

  Even when you try to use MAX, I am the breath.  Any help straightening on my confusion here is very appreciated.

  Thanks in advance and have a nice day.

  -Brad

  In fact, you're not confused.  In this instance of National Instruments is perhaps...

  See the links ofthese ideas in the link.

  But a 'task' is really just a section in an XML file.  If this file is named *.lvproj the project has access to tasks.  If this file is *.nce any labview application has access to tasks.  If this file is created by the RTE that vi has access to the task.  In short, the "tasks" are never really defined by 'Code' but by the XML code to the file than declairs them and teir properties.  Tasks need to be defined a time-preference during design - project

  Yes, it's a bit simplistic but a good analogy!

  Go ahead and kiss MAX to set your tasks... use DAQmx property nodes if you need to programmatically determine a task property.   "do everything in code" as you say is just not really the way it is... the way I think you hear it...  'S really not 'made it in the code"but rather how LabVIEW is inherintly multithreaded.  The IDE just handles it for you "So easy that could encode a cave man!  Relax and let it work the way it does work for you.

• Error code 0xc0000221, how do I fix this without the disc?

  This answer gives no help. As with the OP didn't

  software installation (I've updated to Vista online.) How can I solve this error diskless code. None of the boot parameters anything and I changed nothing on my computer after its last use.

  Separated from the <> https://answers.microsoft.com/en-us/windows/forum/windows_8-performance/recieve-error-code-0xc0000221-missing-kernel/c2e33d0f-6837-4466-8d03-2f9440b65cab >

  I solved this problem by a lot of Googling. I suspect the issue was as a result of low memory - no changes had been made to the computer any time recently.

  I could not boot into safe mode, or I could use a system restore point, because it there was not enough memory to run the restore. I also could not download everything. ISO files to create the installation media that I couldn't get on the computer to access the net to do the download.

  When you start boot I pressed F12 and in the chosen boot HDD Menu.

  I went to solve problems > Advanced Options > start settings and had a violin around there. Subsequently one of the options worked.

  I hope this helps someone else who is also not a massive tech-head like me.

• How can I download pictures without the help of Photos?

  V10.10.5 using OS X Yosemite with pictures v1.0.1. I would like to upload RAW files without having to import through Photos, because I want to change them. Unfortunately, I was not very successful. While exporting pictures (RAW) images in a folder, the images have been converted to jpg. :-(

  Therefore, how can I download photos from my camera without using pictures?

  Download from where to where?

  Usually you download using Safari or another web browser and click load and select the RAW file wherever you downloaded it to disk

  If you talk about form of import a mount of the camera the card in a card reader and use the finder to copy the files to the location you want RAW format - or use Image Capture to import them to any desired location

  And importing RAW woes not convert them to JPEG using the finder, transfer of images or Photos - each of these copy the RAW file as that disc for your use, you choose

  LN

• I have a .pmd file how can I open it without the Pagemaker?

  I have a .pmd file how can I open it without the Pagemaker?

  InDesign CS6 and earlier can open it with putting in custody who they're going anywhere nearby unusable.

• How Downgrade of El Capitan in Yosemite without data loss and without the help of a Time Machine?

  I, are looking for an answer to this question, but couldn't find one.  If there is an and missed it, please tell me and I will look happily on it.  I want to do it without the help of a Time Machine, because I used it at the time of Yosemite.  And I discovered that you can use a cable USB or SD to come down, but how do you do this without losing all my data?

  You must save, erase the drive, install Yosemite, restore your backup of the data

• I have an IBM PC camera, but do not have the installation CD. How do I install it without the CD

  I have an IBM PC camera, but do not have the installation CD. How do I install it without the CD

  Hello

  What is a model supported by your version of Windows? You could just plug it in and see if Windows recognizes
  and they get the drivers off of the internet. Although it is recognized that you should always check the manufacturer's website
  new drivers and control software.

  Check with the site of the manufacturer of the camera brand and model you should be able to download the necessary software.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to print a document without the background of color?

  I use HP Deskjet 2050. Just wonder how to print a document without the background of color? Thks

  You want to print the entire page in only black and white, or are you wanting to remove a background from an image and print it?

• How to reformat DV2500 HP without the recovery disk? my recovery disk went please help me thank you

  How to reformat DV2500 HP without the recovery disk? my recovery disk went T_T PLEASE help me thank you

  jamboy16 wrote

  How to reformat DV2500 HP without the recovery disk? my recovery disk went T_T PLEASE help me thank you

  If your goal is to reinstall the operating system there are ways to achieve

  We need to tap the F11 key immediately after presswing the laptop power button. Who will call the Recovery Manager unless you have deleted the recovery partition or have done something to the original disk partition scheme. In the Recovery Manager simply choose to recover your PC for the original operating system

  Alternatively, you can order a set of HP recovery disks.

  Best regards

  ERICO

• Hello! Has bought the photos but they have still the watermark Adobe &amp; the free also, how I can get them without the watermark?

  Hello! Has bought the photos but they have still the watermark Adobe & the free also, how I can get them without the watermark?

  Follow the steps in these screenshots: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• My computer crashed. I lost CS3. How can I re - install without the disc.

  My computer crashed. I lost CS3. How can I re - install without the disc.

  Hi Sydneybrown,

  Please use the link below to download your CS3 product.

  Download the CS3 products

  Once downloaded, you can use your serial number to install and activate the product.

  ~ UL

• How to keep Freecell data during the upgrade Windows XP to Windows 7

  that I upgrade from Windows XP to windows 7 Pro. I have years of freecell statistics. can that copy to the new windows 7?

  Thanks in advance...

  original title: data saved freecell

  Hi crcjetty,

  Try the method below and check if it works.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  (a) go to Start > run

  (b) type regedit and click OK

  (c) press ctrl+f

  (d) type freecell and click Next
  Look at the bottom of the screen and you should see the registry key you are is

  e) HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\FreeCell

  (f) in the top toolbar: click on register

  (g) click export a file of the registry...

  (h) in the window that opens: type the name of the file a:\Freecell.reg

  (i) check the selected branch under Export range

  (j) put a floppy disk in the A: drive

  (k) click Save

  ·         When you did a new install of Windows 7, put your floppy disk in the A: drive and double-click on the Freecell.reg file

  ·         Click Yes when asked if you are sure you want to add the information to your registry.

  ·         Click OK when advised that the information has been added.

  Windows Easy Transfer

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

• How to reinstall Windows 7 without the CD?

  Hello, I'm afraid that I may have a botnet on my computer and my anti-virus is not picking it up. How can I completely reset Windows 7 without the CD? (I lost it).

  If this is in any way possible, what is a good software that is specifically designed for detecting botnets with a very high detection rate? I tried the software anti-botnet of Trendmicro, but it does not install on 64-bit computers.

  I'd really rather reinstall Windows 7 I have a lot of junk files and programs that I just would rather start over. I have already backed up my files, etc. I'm ready for it, I just need to know how to do it without the CD.

  Some of the links to the. Download the ISO file may no longer be active, but if your version of Windows is still an active line, you can download the. ISO files and create a bootable DVD from the. ISO file. Your product key will work for the version you purchased.

  Once you have created the. ISO, you can perform a new installation.

  Also down at the bottom of this post is a link to a good how to remove the virus site and what software to use. I also posted my own experience of suppression of vituses of different computers belonged to some of my friends.

  Download the Windows 7 ISO Image
  http://Windows7.digitalriver.com/servlet/ControllerServlet?Action=ContentTheme&locale=en_US&siteid=mswpus&pbPage=upgrade&RESID=FhincAoBAkYAADeY5U4AAAAP&rests=1259460117930

  Also: Download the Pro 33 or 64 - bit. ISO file and read this article to create a universal DVD. http://www.mydigitallife.info/2009/11/10/Windows-7-ISO-x86-and-x64-official-direct-download-links-ultimate-professional-and-Home-Premium/comment-page-1/

  How to select any edition or Version (SKU) of Windows 7 to install from ISO or single edition DVD disc media:
  http://www.mydigitallife.info/2009/07/23/how-to-select-any-Edition-or-version-SKU-of-Windows-7-to-install-from-single-Edition-DVD-disc-media-or-ISO/

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Download and install burn ISO Gear (free):
  http://www.GearSoftware.com/gear-ISO-burn.php

  The best approach for a very infected PC
  is a 'Clean Install' you can never be 100% certain that every last bit of the infections have been removed.

  That said if you have time and want to see how you can go to eliminate viruses, malware and bots then read on.

  Start by reading the following information of the Virus removal:
  Provided by: Malke - MS MVP:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  For me on a PC friends who had more than 60 infections and there is no CD of restoration and the key code has been lost, the article above "Malware Bytes", "AVG Free" and Norton NIS 2010 has been around.

  NIS 2010 trial recently released software:
  http://shop.symantecstore.com/store/symnahho/en_US/ContentTheme/ThemeID.1313000/pbPage.Trialware_en_US?RESID=vyAfXgoBAkgAACCz2K4AAAAQ&rests=1252512234289

  (Note: the trial download Norton NIS requires a credit card, read the terms 'Opt Out' before you start)

  AVG Free:
  http://free.Avg.com/

  In addition, a second pass using Malware Bytes and NIS seems to have removed all infections.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How Automation plug-ins appears under the Help menu?

  Hello

  My Automation plug-ins appear in the controller menu, and it works.

  Here too the menu and submenu. Find and select my plug-in is boring.

  How does appear under Help menu?

  change pipl file may resolve this problem. code is below

  resource "PiPL" (XXXID, "AutomationFilter," purgeable)

  {

  {

  Like {action},

  Name {plugInName'... »},

  Category {' * Help * '}, //Use category {' * Help * '} plugin automation will be under the Help menu

  {"Another string"} category, category {"another string"} //Use plugin automation will be under file | Automation menu.

  Thank you.

• I got rid of a virus. I lost some files as system tools, administration tools, and others. How to make a comeback without the xp disk?

  I have the VIRUS has GOT IT ATTACHED himself to SOME OF MY FILES. WHEN i GOT RID OF THE VIRUS, THE FILES THAT WERE CRUPT am ALLE WITH THE VIRUS.

  HOW OR WHERE CAN I REPLACE THE LACK of FILES that COME WITH WINDOWS?

  Monday, February 27, 2012, 10:15:14 + 0000, CRAIGJENSEMA wrote:

  I have the VIRUS has GOT IT ATTACHED himself to SOME OF MY FILES. WHEN i GOT RID OF THE VIRUS, THE FILES THAT WERE CRUPT am ALLE WITH THE VIRUS.
  HOW OR WHERE CAN I REPLACE THE LACK of FILES that COME WITH WINDOWS?

  Ouch! Please do not yell at us. We can hear you if you type normally,
  in different cases.

  Please answer the following questions:

  What virus do you have? How did you know you had it? How did you
  get rid of him? What files are missing?

  Ken Blake, Microsoft MVP