Command line to stop ix2

Similar Questions

• Keep getting 'command line' has stopped working

  When I try to turn on windows Defender - will work a few minutes then I get the error message the command line has stoped working and leaves the program - it won't turn after I restarted my computer - but maintains it of the thing happens - I have to run a malware scan - but just Defender will not stay

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and should automatically disable the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Use this program:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• On several programs, I get "command line has stopped working".

  I have windows vista, it is currently installed correctly updated - but malware, language programs stop working after I was online - what is the problem and how do I fix

  Hello

  Method 1:

  It seems that some background programs is in conflict with other programs. You can configure your computer in a clean boot state in order to identify what is causing the problem. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2:

  Also, like what happens when you're online it could be both a virus problems, you can run a scan for viruses online for your computer and check if that helps.

  http://www.Microsoft.com/security/products/MSE.aspx

  http://www.Microsoft.com/security/malwareremove/default.aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 10.11.5 only stops the command line

  I have an iMac late 2013 and since the public beta 1, up to the final version of the published 10.11.5 today, my computer just stops or restarts from the command line. There is no problem on 10.11.4.

  Please, what can I do?

  Quit all applications and then disconnect all external devices except the mouse and keyboard and try a stop

• How to stop the command line defragmentation Vista 64?

  I started "defrag - v w" command line 15 hours ago and I think she's still going because I do not have a command line prompt and the hard drive light flashes quickly (and somewhat randomly).  Anyone know how to stop the defrag process command line without altering anything?

  Key does nothing and the Task Manager shows that defragmentation is running.

  The f

  CTRL-c should stop.

• stop all VMS using the command line

  Hello

  I use vSphere 4.1.

  I want to stop all using my VM command line, but at the same time (if possible), in a flexible way.

  I know there is the command vmware-cmd, but it only works if the virtual machine has vmtools installed, and this is not the case in some of my virtual machines.

  So, is there another way to stop a virtual machine (which is not installed vmtool) command line?

  Thank you.

  I have changed according to your needs. the following command turns off only to the desired virtual machine

  Just replace the name of yourvm with the name of the virtual machine and provide your credentials vcenter IP and the user. I marked in red.

  When executing this command to keep an eye on vcenter you will notice vm stop

  Connect-VIServer vcenterIP address - protocol https-yourusername username-password yourpassword

  Get-VM-yourvm name. Stop-VMGuest-confirm: $false

• Stop the virtual machine of comments using command line on esx 3.5

  does anyone know to stop the virtual computer prompt using command-line on ESX 3.5

  Take a look at this thread for instructions in detail: http://communities.vmware.com//message/1219151#1219151

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

• Command line option to stop the update at startup?

  We have a shortcut on the desktop to access webmail server. (Firefox is the default browser.) When Firefox has updates available, the link fails with a message of network downtime, which connfuses users. Y at - it an option to command line, I can add to the shortcut to prevent the update at startup of Firefox?

  http://developer.Mozilla.org/en/docs/Command_Line_Options

• Update to the ARD El Capitan command line

  I use the ARD to manage a growing number of Mac on a single network.  I'm up to 40 now and I'm looking to upgrade the existing installation of Yosemite to El Capitan.  I googled high and low and can't seem to find an answer - the question is-

  With the help of the ARD-tools (installation and unix command line, etc.) is there an effective or recommended to upgrade all 40 machines without having to touch each?

  ARD is really updated the operating system as possibly other related - including applications Apple components. There is a major difference between the upgrade and update and if you tried to use ARD to the upgrade you would effectively disable the client ARD, stopping the upgrade.

  There are a number of ways to all of your mac estate 'upgrade' without needing to touch each one, and most will involve having a NetInstall/NetBoot server on your network. TheNetBoot Service comes with the.app that buy you from the App Store. All methods will be asked to download the installer from El Capitan first. It's to you how you want to go about this, but using the network, but also the OS X Server to deploy the upgrade, as well as the wealth of other services and tools available once you move to the server can be a little too far - no insult intended - for all of your skills? If this is the case for you then maybe simply by downloading the installer once, the cloning of an external hard drive (or a number of external hard drives) and to upgrade as it would be best for your situation?

  Apple gives the the terminal commands for the creation of a bootable El Capitan installer in this article:

  Create an installer for OS X - Apple support bootable

  Tony

• Visual c# command line compiler

  Greetings,

  About 14 days ago I received an error message at startup 'command line compiler Visual c# has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "I click on 'Close' and after a few more screens (same message), the laptop is now running.

  I studied this during two weeks at three sites including two Microsoft sites. No one has an answer. However, when I searched Microsoft technical support I have referred me to the Sony because of the OEM license. So, I find myself in this forum.

  I found according to my research it is a file associated with this - csc.exe. I don't know if it is the cause or not. From research it is a component in C++ and associated with .NET. When I stop I get another error "the application could not initialize properly (0xc0000142). Click OK to close the application. »

  I have tried to use sfc but only get to 96% and received the message "Windows Resource Protection found violations of integrity." BTW, I'm under sfc since a high cmd prompt. I also ran check and looked at the newspapers. Because the paper is too large, but neither the newspaper for analysis or check all the items close to what I feel, I am enclosing details of the sfc.

  I have Norton 360 with virus update subscriptions and also ran CCleaner and SpyBot (I do it each month).

  I don't know what to do. I'm not a programmer and most of the Visual c# sites are for programmers, and told me that if my post is specific, in writing, or debug code, I need to ask for help from someone else.

  I also did the clean boot, add services, and startups. I can't find the program or the offending service. I am at a loss. I need help. Any ideas or suggestions are appreciated.

  Thank you

  Hello Legman,
  Thank you for your message
  It is quite possible that you may encounter a hardware problem if you have a C drive recovery and that you always encounter the error.
  Try to run the hidden partition hardware diagnostic software.

  to access the partition hidden startup cold.
  Spam [F10] several times from the VAIO logo
  Press ENTER to "Edit boot options".
  Once the recovery tools launch hardware diagnostics select.

  If the hard drive test fails to contact alternative service.
  www.sonyrepairservices.com

• 0xc000000e - Windows Home Server 2011 - how to open the repair or the command line option

  Hello

  I currently have the problem that my Windows Home Server 2011 stops booting with the 0xc000000e error code.

  Of course, I searched the web and found the following article:

  https://support.Microsoft.com/en-us/KB/2261423

  Can I boot from my installation DVD. "Windows loading files.

  While two options:

  -new installation

  -repair

  I click on repair. The next screen prompts to choose a restore image. ???? No other options or possibilities. No command line, nothing.

  OK boot with F8. Start menu. No repair option. Only "safe mode with cmd. Tried this. Then download the same GUI as before. Same two options. No CMD and taxation not possibility to use STARTREP. EXE.

  Any suggestions?

  Thanks in advance.

  Alexander

  Hello

  Your question is beyond the scope of this community.

  Repost in Windows Home Server Forums.

  https://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

  See you soon.

• are there options of command line for wuapp.exe (windows update)?

  I have some Vista virtual machines set up to perform specific tasks, then stop - these VMs run at specific times, as if a physical computer running, ran a task, then stop.  I want to be able to automate the Vista updates without having to manually open each VM on a weekly basis.  Are there options for command line for wuapp.exe so that I can program the virtual machine to turn on, install updates, and then click Stop again?  Or y at - it another way to accomplish what I'm doing?

  Thank you

  Hi Prisoft,
  
  Welcome to the responses of Microsoft Vista Forums!

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro/

  With regard to:

  Divya R -Microsoft Support

  --------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think

• MAX command line parameters

  I could program a panel to allow the user to change the configuration settings for a task DAQmx, but decided that it was easer to simply stop the task and launch MAX with LaunchExecutableEx and let the user play with the parameters of the task. Is it possible to tell MAX, for example through command-line settings, to open and view a particular start DAQmx task?

  HELO pblase,

  I don't think that it is possible to configure MAX to open on a particular task. It also seems that there is no MAX ActiveX Automation Server to which we have access.

• What a privilege is necessary for the judgment on the command line?

  I just finish to manage a bunch of files, something I think is sometimes easier to use a MS-DOS prompt with wildcards with. I wanted to put the computer power off and goto bed. I was connected with my normal user account when I published the shutdown command from the command prompt that I used instead of the mouse. To my surprise, I received this message:
  E:\Shared>shutdown s
  The operation completed successfully.
  A required privilege is not held by the client.

  I can understand this restriction for remote clients, but not for the users of the console. What privilege or registry setting would I need to activate this command works for all users of the console? It seems stupid when they can just as easily use Start-> turn off computer-> Turn Off power.

  I'm also surprised with this if the first time I tried it as a regular user in all these years. I use XP Pro, so I can change the local security policy and the security policy templates.

  Can I stop my system with an account standard account standard Windows XP SP3 in command prompt. Was curious when I saw your post.  I'm sure you have checked user account rights.  You have another user account to test?  I would create a user if you have not just to see what happens.

  Just found this, shows your exact error trying to shutdown from the command line.

  http://www.windowsnetworking.com/kbase/WindowsTips/WindowsXP/AdminTips/utilities/Cantshutdownfromcommandline.html

  If you have a Windows XP desktop computer and you try to stop your machine from the command-line by typing shutdown-s you might get the following in response to this command result:

  The operation completed successfully.
  A required privilege is not held by the client.

• Need help to remove the files of the United Nations necessary for the command line

  Original title: DELETING FILES

  I have a large amount of support .png files that have been placed on my C:\ drive, by some malicious programs or the system.  Whatever it is, I want to remove them because they take a disproportionate amount of space (about 25 GB to an indicative value).  They are in a sub-sub-sub etc directory and appear to be copies of random images as advertisements for computers, cars, soccer players and goodness knows what else, since every time I try to see, explore stops at halfway through, due to the large amount of files.

  So my question is: is there a way to delete these files without the help of Windows Explorer, for example by using a command line? or is there another utility of file management that I could use?

  I would appreciate help on this.

  Start > type CMD

  Right click on CMD and select run as administrator

  You type the command DEl as written in the link I mentioned earlier.  Just make sure that you type the location of the file and names as you see them on your system.

  This is another article about the MS BACK Del command

  http://www.computerhope.com/delhlp.htm

  Edit: This may be temporary files from Web pages, that you have seen.  Try this before you use the DEL command.

  Tools > Internet Options > general tab

  Click on delete

  Uncheck data Preserve favorite

  Check all the other available options

  Click on delete

  Windows will remove these temporary files

  Click Ok

  Then, go to start > my computer

  Select the C drive

  In search type *.tmp

  This is more temporary files stored on the computer

  Press Ctrl + A to select

  Press DELETE to remove all the

  You may receive a message file is in use, press on ignore

  Empty folder cookies as well - C:\Users\username\cookies

  Do not delete the file; all content

  I forgot to add.  Once you type the command del, press ENTER to execute it.