Command prompt to activate Windows 10 after the upgrade to Windows 7

Similar Questions

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• After upgrading motherboard continually prompted to activate windows vista

  After the upgrade of my motherboard and processor I'm continually request now to activate windows.  I go through the process and then it will ask you again at a later date.  I have no day the hard drive or my windows vista (vista ultimate 64 Windows) version

  Guatrau salvation,

  ·        Is this a copy retail Windows?

  ·        Or it's a copy of Windows OEM?

  ·        You have installed the latest service pack for Windows vista?

  Check the status of the activation, you can check the link below: activating Windows: frequently asked questions:http://windows.microsoft.com/en-US/windows-vista/Activating-Windows-frequently-asked-questions

  Try to install the latest service pack, you can view the link below: how to obtain the latest Windows Vista service pack:http://support.microsoft.com/kb/935791

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to activate Windows 7 Pro after the upgrade of the system

  Old Config: Celeron / 2 GB / 40 GB. -Win7Pro retail trade / retail Office10H & B

  New Config: i3 / 2GB / 500GB. -Win7Pro retail trade / retail Office10H & B

  Windows worked perfect (but slow). I have updated the comp & installed fresh from the same media. Old hard drive is formatted. Office activated. but windows gives the error "the product key you entered cannot be used to activate windows on this computer". I tried the online activation & the phone activation. for only informed 10 days for activation. Help, please.

  Try the phone activation once again:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If this does not work, try direct telephone activation:

  Direct activation number: (888) 725-1047

  1-800-936-5700

  If the copy of Windows 7 that you installed an upgrade, please note the following:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• HP Support Assistant broke up shortly after the upgrade to windows 8

  I use a 4 month old desktop HP Pavilion HPE h9-1130 Phoenix, with windows 8 pro (64-bit). There are 2 or more months, I upgraded to windows 7 (64-bit), and I followed the instructions of the windows Upgrade Wizard 8. He said not to uninstall HP support assistant, so I left. After the upgrade, which went through flawlessly, hp support Assistant works perfectly. But a few weeks or months, he ran an update, and update failed to start and the program crashed. Immediately after that, the icon of Wizard support hp in the taskbar has disappeared, as well as the program itself. It will be displayed on the list of programs, but I'm not able to uninstall or do something with it. I can't either start. I tried to get help from HP customer care, but they were a bunch of idiots who just wasted my time. I couldn't even communicate with them, because they were all Indians and speaks very by the English. I tried to ask to speak with a customer support English agent or a Manager, but they would put me on hold and it would never transfer, so I hung up. I think I spoke to 6 different customer support agents a few week spans and via different outlets (live chat, phone, email). One of the "agents of support" has been so incompetent that he spent an hour on the remote just link sitting there, doing repetitive things I told him constantly, I had already tried, like trying to do a base installation of the Web-_-... That said, I was wondering if someone could help me solve the problem, because I would like to have Deputy support back on my computer. But I am doing nothing tedious as a reinstallation of windows or something like that, because it's just ridiculous for a program very little relevant.

  Resolved, by none other than myself. No, thanks to HP customer care, or this forumn. Of a curious, I uninstalled a crap tone of the files and folders that are associated with HP Support Assistant, including HP, frame Support HP, HP Setup, HP Setup Manager support and many other files via Windows Explorer (by searching appropriate tab of the computer), Windows uninstaller and Revo Uninstaller free control panel. Once I felt I had managed to get rid of a bunch of broken files of shit, I tried to install a new HP SA on their site, but it wouldn't work. To fix that, I found that guests "Overwriting" mentioned above has led to the problem, which was "swsetup" and HP SA files have been left and prevented a clean install.  So to fix that, I deleted all pre-existing swsetup and files HP SA from Windows Explorer. After all this, I was able to successfully install SA HP, although I had to download it and then manually start the installation process by clicking on the executable file of the application in the new HP SA folder. Everything seems to work fine now, I ran pretty much all the features of the program and they work fine.  The only thing that seems to be a bit weird is that I updated the original HP Bluetooth driver and rebooted, but it seems not to save the update, as it is still prompting me to do it again.  This isn't a big deal, as an easy solution is just for x on this recommended update and hide.   I will update if something happens, but if I don't update, it means that the product works as it should.  Let's hope I don't have to deal with HP customer support once again, what a terrible experience!

• Windows XP mode virtual machine does not start after the upgrade to Windows 10

  Hello

  After the upgrade to Windows 7 Pro for Windows 10 Pro, my virtual Windows XP machine (which was created from the "XP" mode in Windows 7) no longer starts.

  It shows:

  This system is not allowed to run "Windows XP Mode". Now, the virtual machine will be turned off.

  How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?

  VMware Workstation 12.1

  Hello

  How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?

  I fear that the statement is pretty much on the mark.

  Microsoft caught only supported XP Mode in Windows 7, it has been since Windows 8.

  See also:

  https://support.Microsoft.com/en-us/KB/2724115

  You might be able to extract the folder integer vhd it and import it in VMware Workstation as a separate virtual machine. In the end, 'XP Mode' just was running a virtual machine in your Windows 7 after all.

  --

  Wil

• After the upgrade to Firefox 34.0.5, app opens but there is no indication in the browser window, i.e. no URL opens, and there is no message error, but Safari OSX 10.9.5 misfortune

  After the upgrade to Firefox 34.0.5, app opens but there is no indication in the browser window, i.e. no URL opens, and there is no error message.

  Safari (OSX 10.9.5) works.

  I tried the firewall solution, but it does not work.

  Previous version of Firefox work very well. I tried the version installation 34 twice and the computer restart.

  Yoono is a free software that allows you to connect and share with all your social networks and instant messaging in one place services
  www.Yoono.com

  It was very good work. Play well.
  Please mark your last post as solved so other will know.

• After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and are not working properly.

  After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and do not work properly (I already tried several keyboards and is not Firefox or Chrome). This behavior is exacerbated in Illustrator CC, but also affect all programs and even my office. It drives me crazy, does anyone know how I can fix this problem?

  Mi IMac is a 27-inch, late 2013, 3.4 GHz Intel Core i5, and use a Wacom Intuos Pro.

  Could possibly be interfering with the entry Wacom drivers.

  Start safe mode and see if there are still have the problem there. Safe mode is slow and some things do not work, but it prevents some third-party boot loading software. If your keyboard works properly in Mode without fail, this would imply that some third-party software is causing the problem. If so, check the updates.

  It also takes more time to start because the BONE is clean some system caches that can also help.

  Try safe mode if your Mac does not end commissioning - Apple Support

• How to activate IPAD 2 after the last update.

  I was not able to activate iPad 2 after the last update.   I tried to restore from Itunes and still get the same message. "the activation server is temporarily unavailable.   Connection, try your ipad to iTunes to activate it. or try again in a few minutes.

  Has anyone found a solution?    I restored via Itunes and everything done is lose my serial number. That appears is no longer...

  Support told me to send my ipad to them for a quote on the cost to repair?    It is obviously a software issue since there are so many people here have the same problem

  any suggestions?

  This problem is at the end of Apple. Wait until they fix.

  (140876)

• FN keys do not work after the upgrade to Windows 10

  Why the FN keyboard does not work after upgrade to Windows 10?

  FN keys are controlled by utilities and special tools of Toshiba. Usually after the upgrade to Windows 10, the parts of the pre-installed Toshiba software must be upgraded to version compatible and support Windows 10...

  You have not provided information on the laptop model so I can't say with certainty if your unit is 10 Windows supported or not...

• Satellite P855 - function keys do not work after the upgrade to Windows 10

  Function keys do not work after the upgrade to Windows 10
  I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
  Anyone know when and if it will be available?
  Thank you

  I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.

• Problem with a keyboard key of T440 after the upgrade to Windows 10

  Hello world

  I have a Brazilian keyboard layout (ABNT2) on my T440 and I am facing a problem after the upgrade to Windows 10. The new version of Windows recognizes this key:

  

  As long as the "CTRL on the right" (commom on other layouts).

  Everyone was faced with a similar problem or have any clues as to what might solve this problem?

  Thanks in advance,

  Felipe

  Solved.

  Do more research, I fount out is an old bug with Lenovo's Thinkpad laptops with this Brazilian keyboard.

  If you are facing the same problem, use this registry tweak and the problem is solved:

  http://ZTop.com.br/WP-content/uploads/2009/11/thinkpad_abnt_win7.zip

  (the file name indicates "win7" but it also works for Windows 10)

• Re: Satellite A500 - FN key does not work after the upgrade to Windows 7

  Hello
  The FN key does not work even if I have (Toshiba Value added Package) and (toshiba flash Cards help).
  Happened after the upgrade to Windows 7 and using the upgrade CD to retrieve all of the tools and utilities.

  Satellite A500 - 134

  Try restarting Flash cards.
  Start > all programs > Toshiba > utilities > restart Flash cards.
  After doing this press FN button several times.

• Volume controls on the keyboard after the upgrade to Windows 8

  I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory.  After the upgrade to WIndows 8, the volume controls no longer work.  I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.

  In the following device manager are listed under keyboards:

  HID keyboard device

  Keyboard 109 MCIR Microsoft eHome

  Keyboard MCIR Microsoft eHome

  Microsoft eHome key remove control Keayboard

  PS/2 standard keyboard

  Any report that they are installed and are working correctly and that the drivers are up to date.

  Has anyone else seen or solved this problem with a Touchsmart computer?

  The instructions below were provided by HP support.  This has restored the function on the keyboard volume controls.  The referenced below drivers are drivers IDT high definition Audio Device.  I am not sure that it was necessary to reinstall the audio drivers.  It can only had to remove the USB dongle and back to restore the functionality of the button.  Note: the USB dongle is located behind the VESA Panel to the back of the PC.  No tools are required and the dongle can be removed and replaced without shutting down the PC.  VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.

  Instructions received from HP:

  Please go to the following link and check the "return of the system", article #7 is the USB dongle:

  http://support.HP.com/us-en/document/c03026390

  After you have reinstalled the receiver, please download and install the following driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-110499-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

  Then install the following update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-112060-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

• Envy 15 j139tx: fingerprint does not work after the upgrade to windows 10

  I have improved my ENVY 15 NoteBook Windows 8.1 for windows 10 j138tx. But after the upgrade of my fingerprint also does not work. I have updated software driver and it shows as follows.

  

  And the unit is also working (it is said ;-))

  

  But I can't add my fingerprint in sign in option. It does'nt allow me to set up.

  

  And when I open simple passage, it shows me after the error message.

  

  can someone please help me to reactivate it?

  Hello

  Open windows control panel, open programs and features, make entry for HP SimplePass right click and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download the version of HP SimplePass on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71729.exe

  Once the download is complete, open your downloads folder, right click on the installer SimplePass and select "Run as Administrator" to launch the installation.

  Once again, when this has completed, restart the laptop.

  When windows has reloaded, open windows control panel and on the top right, next to the display by: select "large icons".  The new layout, select the HP SimplePass entry and see if you can set your footprint digital log - on.

  Kind regards

  DP - K