command that must be sent to the pen drive to detect using labview

Similar Questions

• How can I tell a hyperlink (< a > order) to open in a new window? Is there a specific code/command that must be plugged?

  How can I tell a hyperlink (< a > order) to open in a new window? Is there a specific code/command that must be plugged?

  http://www.example.com"target ="_blank"> click here!"

  "Target ="_blank"is the key.

• I want to know the requirements that must be given to the team of storage before you create a lun

  I want to know the requirements that must be given to the team of storage before asking a LUN

  Generally the responsibility of a team of storage is to provide space for guests and make sure they can meet the space and I/O requirements. creating a virtual machine is usually done by the administration of VMware.

  Basic information the storage team is the needs of WWN (in the case of FC storage) or IP addresses and s iqn (in the case of iSCSI) to set up the hosts. In addition to this the high need know that it is a VMware environment. According to the storage systems, hosts must be defined with the appropriate operating system that uses the LUN. Once the hosts are configured, all you have to do is to tell the storage team what LUN size you need, who is hosting the LUN must be submitted and probably the input/output expected for the VM running on this LUN, so that they can make the decision for example RAID levels a hierarchy...

  André

• Is it true that RIM does not want the attention of implementers to use the BES/MDS bridge going forward?

  We are developing an application for the BB Storm and plan on the use of the BES for routing data traffic between the enterprise application and enforcement of the storm. We have sent a number of people on a BES installation course offered by RIM. During the course, we were informed by the instructor that RIM does not want the attention of implementers to use the BES for this purpose and that RIM recommends the BES be used only for purposes of e-mail, and that we should use the network providers IP gateway?

  Can anyone confirm or deny this assertion?

  See you soon

  Gord99

  Excellent!

  Thank you Garrett who responded to the questionnaire.

  Gord

• I accidently deleted pictures from the camera chip while it was in drive d:, but before that I copied them to the hard drive. Is there a way to recover?

  I accidently deleted pictures from the camera chip while it was in drive d:, but before that I copied them to the hard drive.  Is there a way to recover?

  Hello

  What version of Windows are you using?

  If it is deleted from the memory card, it can not be recovered. However, there are some third-party applications or the tool that will help you recover photos. If you have saved the pictures on the hard drive and deleted, so you can check in the trash.

  See also:

  http://social.msdn.Microsoft.com/forums/en-us/olsbgeneral/thread/10ef8d69-1049-49D3-9957-9e07d5ed5804/

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• I noticed that my user name in the C drive has disappeared and is displayed under the desk

  original title: save files on the net / backup of the files in the C drive

  These 20 to 30 days, I noticed that my user name in the C drive has disappeared and is displayed under the desk. In addition, whenever I try to save a file on the net on my laptop, this allows me to record only at this location:

  C:\Users\vijai\AppData\Local\Microsoft\Windows\Temporary Internet Files\Virtualized\C\Users\vijai\Documents

  Also in the Solution Explorer, while all other folders category, like documents, pictures, music etc appear in the left panel, these do not appear in the right panel. I also note that a "Application Data" folder appeared under my user name and all files stored in this folder only.

  Can someone help me solve this problem

  Hi, VIJAIRAGHAVANP V,.

  You can try the following steps and check.

  Method 1:

  You can try a system restore to a prior restore point before you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2:

  If you are still facing problems then try creating a new user account and check if the problem occurs:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If you are not faced with any issue, then check out the following link to correct a damaged account.

  Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information helps.

• How to check the CPU usage and paging using LabVIEW

  Hi guys,.

  I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?

  any help, suggestions or advice will be greatly appreciated...

  Kind regards

  Prashant

  Hello

  If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb

  

  Also, you have several screws that you can use to verify information about the processor.

  

  Kind regards

• CP7 SCORM 2004: what a State of success must be sent to the LMS?

  I see success sent only the quizzes passed with the completion status. However, I would like it to be sent on a slide, with the sent on quiz completion spent.

  Success seems to be sent when the completion status is changed from unknown name in complete or incomplete, even if you have it set to trigger on a slide.

• View messes up and says something that has to do with the "display driver"?

  randomly my laptop screen will start going haywire for about five seconds, recovers, said "my recovered display driver" and then gives me the blue screen and restarts. What is going on? should I get a new hard drive?

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 116

  BCP1: FFFFFA8008DB34E0

  BCP2: FFFFF88004007A2C

  BCP3: 0000000000000000

  BCP4: 0000000000000002

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\062612-30622-01.dmp

  C:\Users\hailey\AppData\Local\Temp\WER-99201-0.SysData.XML

  [quote]
  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.

  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.

  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.

  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time
  [/ quote]

• I want to save my email and then reinstall it after that I have to wipe the hard drive.

  I'll update the hard drive wiping and reloading the software I want, get rid of the junk that I have collected over the years. I backed up my data, photos and music from My Documents, etc. but I can't figure out how I can save my email so that when I reinstall Thunderbird I can just empty files saved in the program and I'm back in business. I'm sure that's not hard, but I don't know the meaning of "Computerese" I get lost in technical language. How can I do this?

  Thanks for your help.

  If you have saved your whole Documents & Settings (or 'Users' since Vista) then you have probably already what you need.

  Thunderbird stores your data and profile settings.

  https://support.Mozilla.org/en-us/KB/Profiles-TB

  (Firefox also uses its own profile).

• I just bought a Seagate Back Up Plus, but when I try to format it with the disk utilities it says that it cannot do. The other option is to use the software Seagate provides to do my job of Mac with Windows. Is this right?

  I just bought an external hard drive Seagate Back Up more to use with my Mac. I have several old without the backup function. I formatted them with the disc on my Mac utilities. This is not the format. It says that it failed because of mounting problems. First of all is it possible to format it with disk utility? Otherwise, it's good to install software that provides Seagate that will allow my Mac work with Windows? IM don't like this idea, but...

  Kootkid wrote:

  I just bought an external hard drive Seagate Back Up more to use with my Mac. I have several old without the backup function. I formatted them with the disc on my Mac utilities. This is not the format. It says that it failed because of mounting problems. First of all is it possible to format it with disk utility? Otherwise, it's good to install software that provides Seagate that will allow my Mac work with Windows? IM don't like this idea, but...

  If I understand the question - if this drive will be used for both copies of backup for Mac and Windows-R/W, you should leave a Windows machine format the drive for fewer problems.

  Mac will need software http://www.tuxera.com/products/tuxera-ntfs-for-mac/ for the ability of NTFS R/W or similar

  I would certainly recommend format the drive to remove a remnant of the software pre-installed on the new drive.

  If on the other hand to use Mac - and you cannot mount the drive, try to force mount DiskUtility > file > Mount

  If not can do - the reader is bad out of the box.

• Error code 0 x 80040154 appears when I try to copy a music cd, media player does not read a cd that has been installed in the disk drive

  as above, turn on windows media player, insert a music cd to rip and does not recognize that the cd has been inserted, are asked to insert the cd when there is already one in.

  Hello

  1. is the issue limited to any particular CD?

  2. What is the file format of the music files on the CD?

  3. are you able to burn other files using the CD/DVD drive?

  4. is the CD/DVD drive detected in Windows Explorer?

  5. What is the brand and model of your DVD player and the computer?

  6. have you done any software or changes to the material on the computer before this problem?

  You can see the steps in the link.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  See also:

  The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vista

  http://support.Microsoft.com/kb/929461

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-frequently-asked-questions

  Hope this information is useful.

• Question about reinstalling windows on a laptop that came with it, but the hard drive failed and had to be replaced.

  OK, until recently, the hard drive of my laptop couldn't, and I had to replace, no biggie, I really care about this laptop in any case. Then I threw ubuntu top and let it go from there. But recently, I wonder, if I could get windows again for her, for free. I am sure that it is not under warranty, but I could go and check of 90 percent. I have no back ups for it because it was cheap.

  Additional information:

  HP Pavilion G6-2235us

  Bought in the United States

  Provided with Windows 8

  No backups.

  Yes, if the hard drive has been installed you can just catch a Windows ISO-8 8.1 is not available now and make an own Install.Then, if you have the sticker of the product key on the back of your laptop use the product key to activate. Devices with Windows 8 generally have incorporated in their BIOS product key and use the following tool to get the product key:

  Download the key tool produces OEM of Windows

  Then, you can use the key to activate. In the meantime, here is the link to download windows ISO 8.1 and generate the installation media

  http://www.eightforums.com/tutorials/18309-Windows-8-Windows-8-1-ISO-download-create.html

  Later you can improve Windows 10 too if you wish.

  Let us know if you have any other questions.

• How convert the string in enum by using LabVIEW 7.0

  I learned LabVIEW 8.6, but here at work, so we must use the Solaris workstations built in 95, the more advanced version of LV they will work is version 7.0.  On LV8.6, it was very to change a string to an enum using the format 'text' vi.  On LV7.0, is not available.  I made my own conversion from type vi with a structure of the case, but this is very annoying, because every time I add an element to the enum, I must add something to this vi.  I added the verification code so there is a warning if I add to the enum, but don't forget to update of the conversion of the vi errors.  Is it possible to reproduce the "text format" vi, using LV7.0?

  

  The analysis of primitive string will do the job in LV7.0.  Its a darn good idea to create a control of the enum type-def you use! If the constant and the witness are instances of your type definition, when you change the control (add, delete, rename, swap values) you can press the button to change to apply and PRESTO all your commands, constants and indicators that use the def type are updated with new info.

• HP X 705 PEN DRIVE NOT DETECTED IN ANY PC

  I plugged my USB on my laptop, and he asked me to dial before use. I formatted and the format has been successful. After that I was transferring some of my files and suddenly the USB connection has been lost due to unknown reasons. I reinserted it and then found out that it is not detected. I tried by assigning a drive letter in disk management, but I couldn't see my pen drive listed. I also tried to connect to other computers and devices, but none of them detected. I hope that there is not any problem with USB 2.0 as connection he used to work earlier. It could be a hardware problem and I can not return or ask the supplier I bought at snapdeal.

  Hello Hackerschoice,

  You say it happened when writing files to it. The player bumped or moved while this was happening?

  If the drive is not detected in ANY computer or device, then the reader has become physically corrupted or damaged in some way.

  If snapdeal will not honor a warranty for a recent purchase, your only recourse is to contact HP support directly for your country and ask questions on the help of the guarantee.

  Here is a link with the numbers of the different countries.

  HP technical support / phone call HP customer service

  Good luck.