Comments on a loop in may put the filter in

Similar Questions

• I put the filter for my file flat source?

  Hi all
  Please help me with best practices of ODI.
  My source is the flat file and I want to put the filter.
  
  I put the filter for my file flat source? If so, please help me with best practices from the application of the filter.
  
  Concerning
  Suresh

  Hello

  If you try to create--> Datastore model---> filter---> Insert condition
  then it will not work for files technology. You will get "Invalid Format Description"

  But you can specify a filter in the interface.
  Just drag the columns in your flat file of data store into the canvas and then specify the filter condition.

  Thank you
  Fati

• How can we put the filter

  Hi guru OBIEE,.
  
  I have only one requirement, which will display the records only 10 of the presentation table, the delicate I is not any column in my table of presentation as rownum or represents the number of records, how do I limit only 10 records in my filter OBIEE answers.
  
  for example:-select * from EMP
  where rownum < = 10; - like that I have to put in obiee answers...
  
  Thanks in advance.

  Example:

  RCOMPTE (CHANNEL_DESC) - CHANNEL_DESC - QUANTITY_SOLD
  1 - Catalogue - 96488.00
  Direct selling 2 - 1550224.00
  3 - Internet - 396876.00
  4 - partners - 834700.00
  Sale of TV 5 - 10081747.00

  Place the filter on the column rcount (channel_desc)<= 10,="" for="">

  Concerning
  Goran
  http://108obiee.blogspot.com

• How can I remove the filter TB bar?

  In earlier versions of TB, you may hide the filter bar. How can I do this in the new version? I don't want to show him.
  Thank you ~.

  The Menu bar, select View-Toolbars and uncheck the box.

  No menu bar? Press the ALT key.

  Using the overview of the AppMenu on Options button until the choice of the toolbar appear and uncheck the box.

• It's good to put in glass on screen? is - that may decrease the effectiveness of the screen?

  friends, I brought 6 s more. It's good to put in glass on screen? is - that may decrease the effectiveness of the screen?

  < re-titled by host >

  It could cause your iPhone overheating which may also void the warranty.

• My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  Original title: XP Pro crashes when MB died and move new HDD PC.

  My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  I can access the HARD drive if I boot from another HARD drive (delivered with the Machine).  Windows just hangs.

  Thanks for any help...

  Hello

  If you try to boot from the hard disk on which windows was installed by using another computer and then, you will not be able to boot from it. You can try to perform a Windows XP repair install and check.

• This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switchi

  This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switching autour.

  If you have symbols of button on the stage to the next and previous, each of these symbols has an instance name with a listener event attached to it. The event listener is linked to a mandate. You can have a single event point to a function. So for example, if you have a next button and a click event that points to a function that says something like nextFrame(); and then you want to use the next button to point to a function that says something like nextScene(); you will need to use another instance of this next button and have this different instance to use a different event handler to point to a different function. Who help me?

• Can I put the Mountain Lion Snow Leopard?  Where can I download Mountain Lion?

  Can I put the Mountain Lion Snow Leopard?  Where can I download Mountain Lion?  I don't wan to upgrade all the way to El Capitan.  Some of my software may not be compatible.

  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  You should have a complete backup of your system before performing an upgrade. Given that, we risk minimum trying to El Capitan before adopting it. Instead of spending $20 on the Mountain Lion, when El Capitan is much higher.

  There are not many apps running in Cougar and El Capitan.

  Compatibility lists: http://roaringapps.com/apps

• Can u put the Apple Watch mode bedside table without getting the dock?

  I Haz one question I am about to get a Apple Watch for my birthday

  question, version 1

  can u put the Apple Watch mode bedside table with the original charger, or get the dock from Apple?

  Hello

  Yes - you can put Apple Watch mode table bedside without having to buy the Apple (or other) docking station.

  To place your watch mode bedside table:

  • Make sure the option is turned on: on your iPhone, in the application of the watch, go to My Watch (tab) > General > scroll mode bedside table.
  • Connect your watch to its charger (with power connected):
    • Place your watch on the side with the buttons facing up.
  • To see the time, tap the screen or slightly shift your watch:
    • By design, when the watch is in this mode, pushing even your bedside table may be sufficient.
  • If you also set an alarm with the alarm clock app on your watch, it will warn you at the specified time.

  More information:

  Use the mode table bedside on your Apple Watch - Apple Support

• Equium L20-198: keyboard forgets to put the letters here and there

  My laptop Toshiba Equium L20-198 plays up. The keyboard sometimes seems to be a bit lazy and forgets to put the letters here and here. It seems to be worse when you type faster; is this a driver problem? If yes where can I update keyboard drivers?

  There seems to be none on the toshiba site. If it is not a driver issue - what is the problem?

  Any ideas anyone?

  Don t think that this issue was caused by a defective keyboard driver.
  I read some of the comments in this forum on similar keyboard problems on different laptops and especially BIOS update has solved a similar question.
  I recommend to check and compare the version of the BIOS of your laptop computer with the version on the Toshiba page.
  If it s a newer version then try to update the BIOS, but be careful!
  Don't forget to use the good BIOS and the proper procedure because wrong BIOS can damage the motherboard.

• trigger a loop to run during the impulse is received

  Hi I have an operation simple that I need to run however I can't understand how to perform.  I have a signal that goes up (or true, I can do either) for an iteration then returns low (or false).  I need this high signal to trigger the start of a loop that stays on until it receives a signal to turn it off after the execution of the function inside.  In a circuit point of view, I use a D-flip-flop, which takes in the impulse and the output remains high until it receives a signal to erase it, closing the loop.  I can use either a business structure or loop as my loop, but I just need to know if there is a way to run continuously one loop on receives a single pulse.  Thanks for your suggestions.

  Put the inner circle while loop in a housing structure.  Jump to the main loop the inner loop (inside a case of T/F) until the case selector goes to T, by running a case F is empty.  Once the trigger is going to T then the inner loop before full outer loop moves to another iteration.

• LabVIEW FPGA. Where should I put the custom controls - or type defs in a project

  Hello

  Maybe this is a stupid question - but I'm a little confused on where within a project I should put the controls (or type defs) used in FPGA screws.  If you put in the bit "module FPGA" project, so they come up as "dependencies" - as if they are not in the project within the project when you read/write values in the target FPGA.  Also, it seems that if you copy the project to a different location folder then the FPGA vi can be distributed in a way that she needs to be recompiled - even if you don't change anything - that's not cool if it takes an hour or two to compile.

  I had the controls in the external project for awhile - but seems not ideal from the point of view modular programming, and also, it seems that it may also cause the recompilation unnessary - although perhaps less often that put them in the FPGA subproject.

  Any thoughts?

  I've seen the same behavior and it is a fact that the code must be recompiled if you move a project even if the FPGA code is unchanged. From my point of view, it's a real BUG. This is independent of any file source or target FPGA.

  The other point of your question is not clear relly. Of course, you will get the dependencies if you place the necessary files outside the structure of the target project. But I see no problem to reference them twice because it won't double the source itself. So I suggest to refer to these files several times in the project structure. Actually I'm doing this because I manage a project file LV with different targets CRIO where the complete code for the target FPGA is double referenced under each target.

  It may be useful

  Christian

• When I try to scan several pages, it puts the pages as separate files instead of a single file.

  When I try to scan several pages, it puts the pages as separate files instead of a single file. For example, I may want to scan 5pages ofa patient office visit, yet, when I scan using the ADF, it separates each page in a single file.  I need to have the pages I scan have a single file. OfficeJet 6700

  prod # CV078A

  Windows 7 premium 64-bit

  Same thing for me.  I called HP about it the first time I tried I scans a document when my printer was 7 days old.  I was connected with the service to customers in India.  The technician spent about an hour with me trying to get the 6510/6515 printer to work, even to take control of my new 64 bit Windows 7 core i7 notebook.  Ultimately she essentially told me that even if it is announced to scan documents, this really means that each page is a separate document.  In other words, this printer, as well as all other issues, it is will only scan one page at a time.

• moving table to a spreadsheet of loop string to accelerate the program

  I'm working on a program that should save about 1200 number of data in a spreadsheet file several times per second (the longer the better). Right now, it reads all the data peak, puts all the data in a table 1 d of dbl, converts the array to a string of worksheet and adds the data to the output file, all inside the loop. The problem is that the loop takes a long time to run, then he tops out at about 480 Hz time through the loop. I think that the table to the string of worksheet function is what is bogged down. I just need to record a few seconds of data, so I thought that I could somehow put the data in memory (perhaps an array of arrays?) while the loop tracks, then convert it to the string of spreadsheet and save it outside of the loop. I'm pretty new to labview, and I'm not familiar with how to do it. Any suggestions?

  There are enough little things you can do to optimize this operation:

  1. Learn more about the producer/consumer architectures.  This kind of thing works best with two or more loops.  For example, we take the data and independently, it is shaped and writes data to the disk.  Alternatively, you could have a given to a format the data and you write the data to disk.
  2. Use queues to pass data between the loops.
  3. For best performance in writing on Windows platforms, write songs about 65 000 characters.  This means that you will need to put your data in the buffer and write it in pieces as soon as they are available.  You can use a shift register on the loop to write to the buffer and write only when size is greater than 65 000 characters.

  There is a lot to digest in a short period of time.  Give a shot and post your code with other issues we can help you more.

• My screen keeps bouncing. This may be the cause?

  BOUNCE

  My screen keeps bouncing. This may be the cause? Almost impossible to read.

  Hello

  1. you remember to make changes to your computer before the problem?

  Check if you need to make changes on the monitor.

  Follow these steps and check if the problem persists.

  Step 1:

  Update your drivers to view the manufacturer's Web site and see if they help.

  http://support.Microsoft.com/kb/283658

  Step 2:

  Test the issue in safe mode.

  Step 3:

  If the screen does not bounce in safemode, I you would have put your computer in a clean boot State in order to eliminate conflicts of third party software.

  Note: Don't forget to restart your computer as usual.