Similar Questions

• Construction GetVMFiles.CS errors

  I am trying to build one of the examples of project in the Web development kit. In this case GetVMFiles.CS.  I use Visual Studio 2008 Professional. I tried the two GetVMFiles2008.csproj and the GetVMFiles.csproj with the same mistakes:

  C:\WINDOWS\Microsoft.NET\Framework\v3.5\Microsoft.common.targets: warning MSB3245: cannot resolve this reference. Unable to locate the assembly "AppUtil. C:\WINDOWS\Microsoft.NET\Framework\v3.5\Microsoft.common.targets: warning MSB3245: cannot resolve this reference. Unable to locate the assembly 'VimService2008.XmlSerializers '. C:\WINDOWS\Microsoft.NET\Framework\v3.5\Microsoft.common.targets: warning MSB3245: cannot resolve this reference. Unable to locate the assembly 'VimService2008 '. GetVMFiles.cs (8.7): error CS0246: "AppUtil" type or namespace name could not be found GetVMFiles.cs (9.7): error CS0246: the name of namespace or type 'VimApi' could not be found GetVMFiles.cs (15.24): error CS0246: "AppUtil" type or namespace name could not be found GetVMFiles.cs (16,16): error CS0246: the name of the namespace or type 'VimService' could not be found GetVMFiles.cs (17,16) : error CS0246: "ServiceContent" type or namespace name could not be found GetVMFiles.cs (143,42): error CS0246: the name of the namespace or type 'ManagedObjectReference' could not be found GetVMFiles.cs (159,38): error CS0246: the name of namespace or type 'ManagedObjectReference' could not be found GetVMFiles.cs (258,45): error CS0246: the name of namespace or type 'ManagedObjectReference' could not be found GetVMFiles.cs (290,23) : error CS0246: the name of the namespace or type 'OptionSpec' is not found

  I tried the target of creating project construction in the .NET Framework 2.0, 3.0, and 3.5, once again, all with the same results.

  Any suggestions as to what to try?  Thank you

  In order to build the project, you will need to generate stubs. You will be required to run the available in < SDK > Build2005.cmd \samples\DotNet, which will generate stubs to build the samples. You can also refer to the configuration guide of the developer for further details.

  http://www.VMware.com/support/developer/VC-SDK/visdk41pubs/vsp41_developerssetupguide.PDF

  I hope this helps.

• can someone provide me with processes of generation and deployment for bb os 6

  If possible common build process for all blackberry platforms. The docs that are provided by blackberry drove me crazy. Those who are really help less.

  Please provide me the details as soon as possible

  If you are targeting WebWorks for BBOS 5 - 7.x, Tablet OS and WebWorks 1.0 for BB10, you can do it with an Ant Build script that allows you to build and deploy by modifying and running the script. The Setup is pretty painless, but there is a bit of a learning curve. However, she should really improve your speed by producing new construction to test.

  See the script here: https://github.com/timwindsor/BB10-WebWorks-Community-Samples/tree/master/Ant-Build-Script

  There is a link to a video that shows how to set up as well.

  This script does not work with the new WebWorks 2.x for BB10 if, but if you are targeting the old platforms, WebWorks 1.0 is more compatible anyway.

• creating graphs from report data series

  I want to add the chart to my report and add a control chart on my report.

  I double click on the chart and change the chart type in the chart and edit the series in the chart.

  I use data from a correction of values and choose the name of the field in the drop of my data source domain name, but I got following error message.

  An error occurred trying to create a graph on this report.

  Make sure that the columns selected for the series in the chart are numeric values. Error: The graph could not be generated as a result of an error in the graphics engine.

  I tried to select query data. I have to build my report query.

  I use a stored procedure for this report, so I need advance to build my application once I use the stored procedure, and then Report Builder warn me that this clears all the fields to recreate fileds.

  I would like to know what is the correct procedure to create chart for the report.

  Your information and help is much appreciated,

  Kind regards

  Iccsi

  Please forgive me, never personally, I used the method described in the link I provided. I looked at how I have done the same thing and I have done it differently.

  Click on your chart in Report Builder and in the window Properties give it a name like MyChart.

  Then change your CFML as follows:

  See details in the documentation for ColdFusion here:

  Adobe ColdFusion 9 * cfreportparam

• Clipping paths - practical uses of?

  Hi all

  So I have a trace of shadow around a periodicity created with Xtreampath. A square with what I can only describe as invisible edges. Mostimes I find intuitive Illustrator but I honestly have no idea what to do with it.

  So two questions please.

  1. What is a clipping path?

  2. What are, it is practical use? Please provide examples of how you used, if I can find a practical use for it, so I'll be able to learn it!

  Thank you

  s

  Then there is that the manual will not tell you:

  In Illustrator, a clipping path (the generic term for a common building for which Illustrator inexplicably deemed necessary to replace by "Clipping mask") is the Illustrator for his 25 year, lack of the correct path cutting tool. If Illustrator users generally use clipping paths much more often that shouldn't be necessary.

  An example: Illustrator has this wonderful ability to apply several traces a single path (under the table, he draws in fact several paths, but...). This is very useful for the development of road maps. Large print users, develop road maps include hundreds or thousands of paths open, unfulfilled. Said users then need to cut a small part or detail of the said card. But are all cutting tools for the path of the Illustrator... Well well... of junk, especially because Illustrator has some kind of mental with its own open paths, not satisfied to be demonstrated by the inability of the knife to cut and the inability of gum poorly designed to let the rest of them. Affection is also revealed in usage of combination path common controls that work correctly in other programs, but not in Illustrator. (Illustrator optimistically calls Scouts because their use in Illustrator does a State of confusion similar to get lost in the Woods.)

  So the users throw up their collective hands and resort to using clipping paths... uh...... Masks that simply hide said users would really rather be able to actually cut, resulting in unnecessarily bloated PDFs and print streams. Just think of it as kicks from things on the floor under the couch when guests are expected.

  Mostimes I find intuitive Illustrator

  I would have checked if I were you.

  JET

• ptverify works ok, but not diagnostic.bat

  I am installing Webcenter Interaction with Portal on IIS and SQLExpress 2005 as the database. When I run the diagnostic tool, it gives me the following message
  
  
  PORTAL_HOME = D:\Program Files\bea\alui\ptportal\10.3.0
  Should PORTAL_HOME = D:\Program Files\bea\alui\ptportal\10.3.0
  OpenLog: level of verbosity = 2
  Initializing the system diagnosis OK.
  Portal startup begins: 15 total tasks.
  OpenLog: Inscribed the name of the application: ConfigInitialization (local machine only)
  OpenLog: Inscribed the name of the application: portal. CHIRES35510.kghosh (local computer o)
  EUL)
  FATAL: #1 (InitPortalObjects) step 4 has not completed the task.
  OpenKernel configuration failed. This usually means INVALID DATABASE SETTIN
  DSM run ptconfig to verify your connection to the base. If this fails, check the w
  access rights of the user of the application EB server to the file system. Finally, check
  the XML settings files are not corrupt.
  
  PortalObjectsFactory (.NET) initialization failed
  RECOMMENDATION: Review the exception below for more details.
  Since OpenKernel initialized correctly, that means usually only
  the portal database isn't scripted or properly configured
  or there is an installation problem associated with the .NET assemblies.
  This may mean that find it in libraries is not on your path. Try
  ptverify running.
  com.plumtree.openkernel.exceptions.OKConfigException: error opening data source
  URL: Host = CHIRES35510\SQLEXPRESS2005; Port = 2285; User ID = admin; Database = al
  IDB; The size of the Pool of min = 2; Max Pool Size = 32; Clone of connection if necessary = true
  to com.plumtree.openkernel.impl.db.DatabaseService.DoConnect () in e:\buildroo
  t\Release\openmanagement\4.1.x\opendb\build\x86\src\csharp\com\plumtree\openkern
  at com.plumtree.openkernel.impl.db.DatabaseService.init (IOKComponent configCo
  mposante, IOKLogService ioklsMyLogService, IOKCounterSystem iokcsMyCounterSystem)
  in e:\buildroot\Release\openmanagement\4.1.x\opendb\build\x86\src\csharp\com\pl
  at System.RuntimeMethodHandle._InvokeMethodFast (Object target, Object [] argument
  ENTs, SignatureStruct & sig, MethodAttributes methodAttributes, RuntimeTypeHandle
  at System.RuntimeMethodHandle.InvokeMethodFast (Object target, Object [] argume
  NTS sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwn
  at System.Reflection.RuntimeMethodInfo.Invoke (Object obj, BindingFlags invoke
  Attr, Binder binder, Object [] parameters, CultureInfo culture, Boolean skipVisib
  at System.Reflection.RuntimeMethodInfo.Invoke (Object obj, BindingFlags invoke
  at com.plumtree.openfoundation.reflect.XPReflect.InvokeMethod (Object target,
  at com.plumtree.openfoundation.reflect.XPReflect.InvokeMethod (Object target,
  to com.plumtree.openkernel.factory.AOKFactory.createAndInitializeInstance (Str
  ING sClassName, String sAssemblyName, Object [] arrInitArgs) in e:\buildroot\Rele
  ase\openmanagement\4.1.x\common\build\x86\src\csharp\com\plumtree\openkernel\fac
  at com.plumtree.openkernel.factory.AOKFactory.createAndInitializeCachedInstan
  This (String sClassName, String sAssemblyName, IOKComponent componentConfig, Type c
  lsKey, Object [] arrInitArgs) in e:\buildroot\Release\openmanagement\4.1.x\common
  at com.plumtree.openkernel.factory.AOKFactory.getInstance (IOKComponent compon
  entConfig, Type clKey, String sClassName, String sAssemblyName, Object [] arrInit
  Args) in e:\buildroot\Release\openmanagement\4.1.x\common\build\x86\src\csharp\c
  at com.plumtree.openkernel.factory.OKDBFactory.getInstance (IOKContext icmCont
  Ext) in e:\buildroot\Release\openmanagement\4.1.x\common\build\x86\src\csharp\co
  at com.plumtree.server.impl.core.InternalSession.Init (IOKContext context) in
  e:\buildroot\Release\portalserver\10.3.0.x\portalobjects\build\x86\src\dotnet\co
  at com.plumtree.server.PortalObjectsFactory.Init (IOKContext context) in e:\bu
  ildroot\Release\portalserver\10.3.0.x\portalobjects\build\x86\src\dotnet\com\plu
  at com.plumtree.uiinfrastructure.application.startup.InitPortalObjects.InitPo
  rtalObjectsStep() in e:\buildroot\Release\portalui\10.3.0.x\ptwebui\uiinfrastruc
  ture\dotnet\prod\src\com\plumtree\uiinfrastructure\application\startup\InitPorta
  at com.plumtree.uiinfrastructure.application.startup.InitPortalObjects.execut
  eStep (Int32 sequentialStepID) in e:\buildroot\Release\portalui\10.3.0.x\ptwebui\
  uiinfrastructure\dotnet\prod\src\com\plumtree\uiinfrastructure\application\start
  to com.plumtree.uiinfrastructure.application.AppWarmUp.LoopStartupTasks (Strin
  g _strApplicationName, Boolean bPreflightForProgress) in e:\buildroot\Release\po
  rtalui\10.3.0.x\ptwebui\uiinfrastructure\dotnet\prod\src\com\plumtree\uiinfrastr
  at com.plumtree.uiinfrastructure.application.AppWarmUp.RunStartupTasks (String
  _strApplicationName) in e:\buildroot\Release\portalui\10.3.0.x\ptwebui\uiinfras
  tructure\dotnet\prod\src\com\plumtree\uiinfrastructure\application\AppWarmUp.cs:
  at com.plumtree.uiinfrastructure.application.AppWarmUp.Init (String _strApplic
  ationName) in e:\buildroot\Release\portalui\10.3.0.x\ptwebui\uiinfrastructure\do
  at com.plumtree.uiinfrastructure.diagnostic.DiagnosticRunner.executeAllTestsW
  ithoutPause() in e:\buildroot\Release\portalui\10.3.0.x\ptwebui\uiinfrastructure
  \dotnet\prod\src\com\plumtree\uiinfrastructure\diagnostic\DiagnosticRunner.cs:Li
  to com.plumtree.uiinfrastructure.diagnostic.DiagnosticRunner.executeAllTests)
  ) in e:\buildroot\Release\portalui\10.3.0.x\ptwebui\uiinfrastructure\dotnet\prod
  to com.plumtree.diagtool.diagnostic_net. Main(String[]_args).cs:line 123
  Caused by: com.plumtree.openkernel.exceptions.OKDBException: SQLServer is unavai
  lable or does not exist
  to com.plumtree.openkernel.impl.db.DatabaseService.GetConnection () in e:\buil
  droot\Release\openmanagement\4.1.x\opendb\build\x86\src\csharp\com\plumtree\open
  kernel\impl\db\DatabaseService.cs:line 1374
  to com.plumtree.openkernel.impl.db.DatabaseService.DoConnect () in e:\buildroo
  t\Release\openmanagement\4.1.x\opendb\build\x86\src\csharp\com\plumtree\openkern
  el\impl\db\DatabaseService.cs:line 1181
  ... 21 more
  Caused by: DDTek.SQLServer.SQLServerException: SQL Server is unavailable or doesn't
  not exist
  to DDTek.SQLServer.SQLServerSession.dbConnect (pers. SQLServerTDSCommunication)
  
  at DDTek.SQLServer.SQLServerSession.Connect)
  at DDInt.Common.CommonSession.Open)
  at DDInt.Common.CommonSessionPool.Fill)
  at DDInt.Common.CommonSessionFactory.GetMatchedPool (CommonConnectionOptions c
  onnectionOptions, CommonIdentity identity)
  at DDInt.Common.CommonSessionFactory.GetSession (object owningObject, CommonCo
  nnectionOptions connectionOptions, Boolean skipLicCheck)
  at DDTek.SQLServer.SQLServerConnection.Open)
  to com.plumtree.openkernel.impl.db.DatabaseService.GetConnection () in e:\buil
  droot\Release\openmanagement\4.1.x\opendb\build\x86\src\csharp\com\plumtree\open
  kernel\impl\db\DatabaseService.cs:line 1348
  
  Task 'InitPortalObjects' failed during startup
  
  Step #1 (InitPortalObjects) #4 the task
  --------------------------------------------------------------------------------
  
  error: failed to initialize of PortalObjectsFactory (.NET)
  platform: Windows (.NET)
  failure: FATAL: failed to initialize of PortalObjectsFactory (.NET)
  Recommendation: RECOMMENDATION: consider exception below for more information
  Details. Since the OpenKernel is initialized correctly, this is usually
  means that the portal database isn't scripted or correctly
  configured, or there is an installation problem associated with .NET
  assemblies. This may mean look for it in libraries is not on your
  path. Try to run ptverify.
  exception: OKConfigException
  OpenKernel configuration failed. This usually means not VALID
  DATABASE SETTINGS. Run ptconfig to check your database
  connection. If this fails, check the web application server
  user access to the file system rights. Finally, check the
  The XML settings files are not corrupt.
  
  message: error opening data source URL:
  Host = CHIRES35510\SQLEXPRESS2005; Port = 2285; User
  ID = administrator; Database = alidb; The size of the Pool of min = 2; Max pool
  Size = 32; Clone of connection if necessary = true
  secondary exception: to
  com.plumtree.openkernel.impl.db.DatabaseService.DoConnect () in
  e:\buildroot\Release\openmanagement\4.1.x\opendb\build\x86\src\csharp
  \com\plumtree\openkernel\impl\db\DatabaseService.cs:line
  130W
  --------------------------------------------------------------------------------
  
  FAILED TO INITIALIZE THE SYSTEM. YOU CAN'T PROGRESS BEYOND THIS POINT.
  = Diagnostic run full =.
  Starting completion percentage: 10% (5 steps to 50 full)
  Diagnostic testing complete.
  Press on < enter > key to exit.
  
  Although ptverify works ok. Any suggestions? Thanks in advance
  
  Published by: user13387710 on August 3, 2010 15:46

  Maybe a problem with the host: CHIRES35510\SQLEXPRESS2005
  Is this an instance name after the name of the server? Maybe you need not the name of the instance if you have a fixed port for this instance?

• Installing Oracle retail point of service

  Hi guys;
  I will implement in the laboratory service oracle retail point them, my server runs on the use of the virtual machine sun Oracle enterprise linux 5.2, sun jdk 1.5, derby apache 1.2.2, and oracle database 10g release 2. my client runs on windows xp, sun jdk 1.5, derby apache 1.2.2. I created the database schema owner and a user data source; in my installation, I chose N-guard-store server for the server and the Client, N-guard. for the client, the installation went fine without error. server-side I lance./dbbuild.sh seed_data, the objects have been created in the database, I am connected via isqlplus with details of schema owner to check. My goal is to launch the application client side, whenever I run Clientconduit.bat I had the first screen with the following message: initialization failure.it gives me time on time and he also said online. I never do that before, I would be really grateful if anyone can help me get this right. just the application connection to the database, not to mention any device connected to the customer now. can someone give me the title of a book and an ISBN for Oracle Retail service point? (for now I use the oracle documentation)
  
  
  Thank you.

  Note: _ check JDIC. JAR, FOLDER WINDOWS is already in your \Client\360common\common\build if SO confirm if jdic is according to specific BONES.

  I think you do not copied the jdic.jar, the folder windows jdic-20061102-bin - crossplatform.zip, or the jdic - xxx.zip make sure that you have selected right zip as in specific operating system, please follow the link for jdic - xxx.zip

  https://JDIC.dev.Java.NET/servlets/ProjectDocumentList?folderid=6267
  and select jdic-20061102-bin - crossplatform.zip

  Extract the ZIP and just COPY jdic.jar, windows folder in the \Client\360common\common\build folder.

  (a) reboot the server and the Client
  (b) at the end of the Client console, you can find the following lines added

  native lib \Client\360common\common\build\windows\x86na path
  tive \Client\360common\common\build\windows\x86 lib path.

  Now you can access browser, because I tried the same scenario without jdic.jar, windows record is same error produced here.

  Concerning
  Nanan

• No error message or warning in the build output, but the generation fails

  Hello

  I'm trying to compile a project that I wore CVI 5.0 on ICB 2013. When I compile it the output Build window displays all the files included in the project, no warning or error but the build failed. I must say that I am new to the CVI. I tried most of the options generation and of course to configure warnings. It makes no difference. And as long as I don't get any error message I can't start to debug. I hope that I made a rookie mistake simple. So thanks for any information you may have.

  Hello rdwitt,

  I was able to reproduce the problem. The problem lies within the CVI, so he is not related to a project setting. Apparently, the special characters in the word "Prüfstand" affect the functionality of the build system. It was a known issue for 2013 CVI and has been corrected in the patch. I was able to update CVI 2013 with the patch and the problem disappeared. The build fails due to errors in several files.

  Don't update patch has not worked for you? I applied the patch, restarted CVI and was able to build the project of Desktop\NTC Prufstand III\Main\...

  Another solution would be to delete the special character of Prufstand.

  Best regards

  = Nelu F. | National Instruments.

• yet man WARNING said "the project has problems", but none are listed and dvd build work if hit ignore

  I am building a dvd project in still and when I try to compile I get a popup warning that says "the project has problems that could cause the disk to play properly...". "but when you click on 'view' to see the problems (in the form of test generation) there is no problem. And if you click on 'ignore', he seems to build a perfect drive. Should I be worried?

  You are probably right, but I would test the disc more than usual.

  Make sure you have all the options checked in the error checking window that opens.

• Flash Builder - Exit Code: 6-0 fatal Error (s), 6 (s), 4 warning (s)

  Hello

  I can't install Flash Builder or catalyst. They're both part of CS5.

  I had a look at the forum and tried a few things

  · Run as administrator or re-installed Flash Builder and catalyst

  · restarted the computer in a State downplayed, did a scan of the system etc.

  These two methods have not worked for me and I get the same message:

  Exit code: 6

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 6 (s), 4 warning (s)

  WARNING: WARNING: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding will not be repaired, because of update patch ITS and a payload of high level is being installed.

  WARNING: WARNING: {68CEA5C9-2964-4ECB-84A4-D77C511332BC} Adobe Media Encoder CS5 X 64 will not be repaired, because of ITS update patch and a payload of high level is being installed.

  WARNING: WARNING: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding will not be repaired, because of update patch ITS and a payload of high level is being installed.

  WARNING: WARNING: {68CEA5C9-2964-4ECB-84A4-D77C511332BC} Adobe Media Encoder CS5 X 64 will not be repaired, because of ITS update patch and a payload of high level is being installed.

  ERROR: A Custom Action for payload {177E1CA1-14CC-4398-AB15-A5746EFE8F22} Adobe Flash Builder returned the error. Failure to comply with this payload.

  ERROR: A Custom Action for payload {E8815668-95B0-443D-AC92-2BFD7DD8F16A} Adobe Flash Catalyst CS5 returned the error. Failure to comply with this payload.

  ERROR: The following payload errors were found during the installation:

  ERROR: -Adobe Flash Builder: installation failed

  ERROR: -Adobe Flash Player ActiveX 10: installation failed

  ERROR: -Adobe Flash Catalyst CS5: installation failed

  -------------------------------------------------------------------------------------

  I am running Windows 7, x 64 (Home premium) with memory of 8 GB and a terabyte of hard drive.

  I'm new to all this, I must admit for any help or advice would be greatly appreciated.

  Cheers J

  By looking at the log you have sent (under separate cover), it seems that your user name contains an ampersand - &.

  I think it is one of the characters that java does not properly handle in railways, reported in the error. Here's a way you can test this theory:

  -connect as another user with a user only alphanumeric name, preferably one with Admin rights machine

  -install FB under this user and see if it succeeds.

  If so, then you can return to your privileged user account and run there instead. In this case, you probably want to change path workspace default FB to a custom path that is not under your home folder of the user, in order to avoid other problems with this sign in the path.

  -Chris

• Firefox Nightly build 30.0a1 warn me when closing window with tabs

  When I close my window I do not get the option 'Save and exit', not even a window warning me. I liked this option because I was able to decide whether or not I wanted to keep the current group of tabs open.

  It turns out that I had to put the "when starts every night" affecting something other that "show my windows and tabs from last time '. Sorry about that.

• Absurd WARNING repeating in Flex Builder 3 beta 3

  I get a repeating warning (appears more than once in the log window), but nothing wrong with the code at line number referenced.
  
  The warning is "variable deceleration duplicate" and while it is true that, at some point, I had this problem, I have since fixed and in fact added a bunch of new code that poses for line numbers to move, yet I still get a dozen instances of the same caveat on the same line number.
  
  is it possible to clear the warnings or make them cool? I think that it is a caching problem.

  Yes, it did. Thank you very much.

• KB2418241 Installation causes TFS Build to fail

  We recently had a series of automatic updates installed on our TFS server over the weekend.  After these updates have been installed - our generation automated nightly began failing, he could get later - would not have build - nothing...

  Backup off the patches that have been installed one at a time until he started working again - and then reinstalled the ones we removed until we could get his failure once more, we started.  We were able to narrow the problem down to a fix.

  The problem that happens when install us KB2418241 (updated for .NET Framework SP 2.0 and 3.5)

  http://support.Microsoft.com/kb/2418241

  Our generation is nothing fancy - just get latest - perform a build, and that's all.

  The event log provides no details as to why this is happening, just a single message with the command start MSBuild - when you try to run this in the command prompt - you get a WindowsShellEx "Access denied" error.  Our services are connecting with the right credentials and the domain account using the service has full access to the folder to get later.

  For the time being - we will not re - install the patch until we find out why it does not work - but it would be good to know why it fails at first.  All I have this problem and have ideas on how to resolve the issue in addition to not use the patch?

  Thank you

  Chase

  See the section "How to get help" of http://support.microsoft.com/kb/2418241

  For individuals (only), visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 10 build 9926 unusually heavy use of CPU on the venue Pro 7130 i3 11

  Define how the other owners of 11 Pro 7130 meeting places had good success in the management of the Windows 10 preview, I conducted today a place in upgraded from 8.1 to 10 build 9926 (the one with the Continuum, which is great), but I'm having the issue of constant between 50 and 99 percent high CPU load , with no guilty in the Task Manager. Before you go to format and do a clean install I wanted to ask if anyone knew this problem.

  EDIT: the unusually high load seems to be triggered by a process called Windows Driver Foundation - user, whose executable mode driver is wudfhost.exe.

  A complete reinstallation did not help.

  EDIT 2: If someone experience the problem, disable completely the service named "Windows Driver Foundation - user-mode driver framework" helped, with seemingly no ill effects, although after weird restarting it may need to be disabled later.

  As a warning, I note how in general, it is never a good idea to go mucking in services.msc.

  Some information about my experience with the Windows preview 10, the two pre - and after Cortana on a Dell coming Pro 11:

  1. Builds before the last Technical Preview 9926 looked much more like Windows 8.1
     1. They shared the same start menu and app store. It was almost like 8.1 with all it's bugs ironed out - and a few goodies in. Really worked well on my V11P.
  2. 9926 build adds many new features - but also adds tons of bugs.
     1. Look around the net and you will see common problems that are corroborated by many users of the technique of the preview. You will have to take the good with the bad.
  3. Upgrades (from 8.1 to 10) on-site are problematic - ESPECIALLY with the most recent Technical Preview 9926
     1. My installation of the latest version of Win10, migrate my settings 8.1 resulted in an installation with tons of questions. My Active stylus barely worked - sensor HID driver will fail to load and having problems. He would go to the mode standby and never go on low power, draining my battery. He had 100% fail still to wake up from its sleep - I would get a black screen that requires a hard shutdown and reboot. I also had the CPU usage very high with the WDF service. As mentioned above.
     2. Overall, a lot of things online really as you can imagine - and this is frankly not worth it to upgrade on site.

  So, with that said - what was the solution?

  New installation.

  Here are the steps to get the best Windows 10 installation on a coming 11 Pro (I know - in my experience).

  1. Download the version of ISO - installation of a USB disk with the utility in Rufus 
     1. Boot on it by pressing volume up several times during boot up until you get the boot menu. Then use volume up to move to the bottom of the list - low volume to select the highlight boot device.
     2. After the installation of the key USB - copy the most recent copy of Dell Wireless driver for your Intel/Dell Wireless card, a copy of 7-zip, and a copy of the latest Dell cabin Pack for the 7130 file in a directory on the USB drive (make one, name drivers or something).
  2. Install the Windows technical overview 10
     1. Delete all partitions on disk 0 (or whatever your SSD) until you have one unpartitioned space - and install it.
  3. When you first - start your screen will be slow/choppy as all hell!
     1. This is mainly due to the fact that there are very few compatible drivers cooked in Windows 10.
  4. Do not start to install the drivers from the Dell site - many will prove to be obsolete.
     1. Only install the drivers from Dell/Intel Wireless to obtain network connectivity and the internet
     2. Then install 7 - Zip and extract the CAB Driver Dell file in a directory on your C:\ called "C:\Dell.
  5. Now you have a network connection - start Windows Update
  
  
  1. Windows different Intel chipset - including video device drivers will begin to download.
  2. It will ask to reboot - let him.
• Now - if your tablet is something like mine - after it restarts, it will start flickering like hell.
  1. This is the video driver Intel panic hell. Tablet may hang - just persist through the pain and continue.
  2. I found mine to panic more with the help of the touchscreen - so I plugged a mouse.
  3. Mine has been fixed by disabling "Auto Refresh Panel" in the Intel graphics options menu (click Law Office, Graphics Options). This setting can be found under the section power options.
     1. Do it and restart. My flicker ceased thereafter.
• At this point - I expected and wanted things worked, but open Device Manager
  1. (Start menu - type "Device Manager") - or-(Start Menu-> Control Panel-> Device Manager)
  2. There was a last device without driver SM Bus controller. Click - Update right driver and point it to the directory of D:\Dell you have extracted the CAB file.
  3. It was't until what I installed the driver for the device that he would go to sleep properly connected.

Now - a word of warning. Unlike earlier versions of win 10 - my Eve connected sessions drain about 1, 500 MW/h. That's what I saw in 8.1 Win no matter what I tried - I wonder if there is some sort of driver problem - and replacement needs. My sleep study reports show some offenders - everything works for less than 1% of the sleep cycle, but the material is not a descendant to C3 to sleep, which is where the power drain is. Looks like a driver chipset of a certain type of malfunction - I'll do a trace and try to isolate the problem.

Apart from that-, all has been MUCH more stable. Sleep (although draining the battery) are coherent rock, I have the high utilization of the processor in the stronger WDF service, and the active stylus works exactly as it should.

I'll stop it between uses for now - and keep stable and see if there is a driver chipset or something that solves this problem.

• How will I know InForm minor version (build) before installing the product?

  Hello world

  If I was a developer (or you have always wanted to be), or had friends in Prod Dev, I would not distract here (so you call a warning).

  I need to know Oracle Health Sciences inform build number (aka minor version number?) without having to install the product.

  It is a dotted version number normally observed in properties extended to most recent or dll, as well as files exe in 'about system' - like 6.1.0.1.1009, for example.

  I need to know this '1009' part to install the package I will or will not be installed.

  It is not mentioned in the release notes and not tied the number of patch in the name of the archive downloaded.

  I tried to decompress data {#} .cab manually to check a few binary, but it must be a new format of InstallShield, so 7-zip and deballeurs as Universal Extractor cannot deal with it.

  It sounds ridiculous that I need to spend hours to build a full blown server and installing a product just to get acquainted with this thing.

  I must be missing something trivial (but see warning).

  I'm OK with any solution - a link to the reference doc that lists built for versions 6.X or a patch number formula (if it exists), or a tool confirmed to unpack this version of Oracle CAB format is used to inform these days.

  Can anyone help?

  Thank you

  -S.

  MargiS thanks!

  Moved to the Health Sciences Community.

  In addition, found a friend in the development, which explains the common rule for other products, which is used to inform both:

  If a product install media is supplied in the form of ISO image, then the last number name of file is the minor version, i.e. for InForm_60_x.y_zzzz.iso the build number zzzz.

  Answer to a person who can find an answer here.

  If this message appears to be in non-compliance with the subjects of this space, feel free to delete.

  Thank you

  -S.