Communication between two Sites

Similar Questions

• Replication between two sites with essential Kit more

  Hi all

  can anyone confirm that the following scenario is possible?

  A basic Kit Plus - replication - another essential Kit Plus
  3 Hosts                                                                      Other 3 Hosts

  In other words: is it possible to replicate virtual machines between two sites, each managed by a single essential Kit Plus (outside the bounds of the CV)?

  I'm sure that is correct, but I want to be sure.

  Thank you guys!

  Alex

  Yes, you can use replication between vCenters thus vSphere. To do that you would like to devices VR is deployed to each vCenter and then connect them. How to do this is described in the VR installation and config and administrative documents.

  BTW, my name is GS.

  See you soon!

• I want to create communication between two laptops by Bluetooth series

  Hello

  I'm trying to accomplish communication series between two laptops via a Bluetooth connection.

  The two laptops are NOT portable Toshiba, but they work together the Toshiba Bluetooth Stack For Windows. They have both also use the default Bluetooth Manager program supplied by Toshiba and Dell (just rebadged?).

  Basically I can set up a connection no problem, but then I have never send data serially from one computer and watch the receiver serial port on another computer but nothing happens.

  Is there a good tutorials for this? It would be nice to have something for the Toshiba Bluetooth Manager especially windows and buttons have names as explained in the tutorial.

  Thanks in advance.

  Adam

  I tried via a hyperterminal connection for testing purposes and it worked.
  Maybe the description also contains useful information for you.
  It is here:

  PC1:
  Start "Bluetooth settings-> Mode custom-> Select Remote PC-> Select"Serial Port"-> Accept proposed (in my case COM40) COM-> Confirm Assistant windows port
  until the installation is completed".

  PC2:
  Start 'HyperTerminal-> Select COM7.

  PC1:
  Start 'HyperTerminal-> Select COM40 (in my case. (See step 1 above) »

  PC1, PC2:
  Enter the password even if security is enabled for example "0000".

  PC1:
  Everything you type in HyperTerminal must be visible in HyperTerminal of PC2 and vice versa.

• GPIB communication between two computers

  I try to communicate between two computers via GPIB. A computer to send an order, the other will receive, save and then respond accordingly. This response will then be received by the first computer and displays (this is the emulation of a device, the real need is to communicate with a satellite TT & C)

  I realized all of this. However, to be in listening mode I wired a property node with a timeout-infinity (1) before reading. Now I can't leave the VI as he is still stuck in playback until the receipt of an order.

  How can I get out of the VI when he's stuck in playback function.

  PS: Using GPIB for communication is a requiremnet of ht eproect and cannot be replaced.

  Hello

  You can have the timeout of read and then clear the error and keep looping until you get a message.  And then you can use arithmetic consisting of stop the loop if you click on the stop button, or get one error other than a timeout, or if playback returns data.

  If it works for you?  I joined your 'writing and then read.vi' with the added code.  Double check my logic, I'm sure it's just but not run it.  Also, if you return a large amount of data make sure that the time-out period is sufficient.

• Problem set up RV connection between two sites

  Dear all,

  I'm putting a replication for some virtual machines from the production site to a recovery site. The two sites are on ESXi with vCenter 5.5 5.5 with their own AD domains. The connection between them is done with customer VPN Cisco of DR site in Production site.

  I installed SRM 5.5.1 on two places and I was able to successfully combine the two sites. The State of them is CONNECTED on both sites. On both environments, I deployed unit of replication vsphere and that they are properly registered on the two vCenters.

  The problem is that when I try to configure the connection of VR, I get the following error:

  VRM Server generic error. Please see the documentation for troubleshooting information. The detailed exception is: '"HmsServiceInstance" thrown an unexpected exception "java.net.UnknownHostException' with message 'siteB.dns.name' when calling method of managed objects' getContent".

  I get this error from two different points.

  I can't do a ping on the two sites using the FULL domain name and I've tried the following article:

  VMware KB: Configuration to connect to the VR in VMware vCenter Site Recovery Manager server reports the error:' managed objectives...

  Could you please help me solve this problem.

  Thank you

  Aleksandar Aleksandrov

  Hello

  In fact the two devices needs a connection between them as they periodically exchange messages for the two sites must be able to connect to vCenter Server port 80.

  Thank you

  Dzhem

• TimesTen - Communication between two DSN

  Hello
  
  Currently I have a setup in Oracle DB in which there are two databases and objects are accessible in all of these databases via the link/synonyms database.
  
  Now, I need to replicate that in a Cache Timesten InMemory DB underlying of Oracle databases configuration that would involve the creation of a link between two DSN names stored on two different servers.
  
  Can you guide me on how to go about it.
  
  Thank you
  Karan

  Unfortunately there are several constraints here that aren't going to help you:

  1. when using the TimesTen "cache" feature a single TimesTen database can only cache data to a backend Oracle single instance. Only regular tables can be cached (not views, dblinks etc.). So, if you have two instances of Oracle Db and you need data in cache at the same time you will need two TimesTen databases.

  2. as mentioned, TimesTen does not support dblinks, remote queries or queries/transactions distributed between various databases TimesTen (well, what he does in some circumstances, but anything that will help you I think).

  3 TimesTen can replicate data between different databases TimesTen, but in general you can not use the level replication table with cache tables.

  So I think, to adopt TimesTen in your application as an important architectural work may be necessary. Only you can be the judge of that, of course, but considering this please keep in mind the constraints above.

  Kind regards

  Chris

• Connectivity between two site to site VPN

  I have two remote sites that each connect to our main office using a site to site VPN. Remote offices have 831 routers. The main office has a PIX 515.

  A remote office is 192.168.15.X and the other is 192.168.100.X. The main office is on a 10.X.X.X network.

  Each remote office can contact the office with no problems. However, they cannot communicate with each other at all and I need this to work. I just want to be able to access the network 192.168.100.X network 192.168.15.X through the VPN tunnel that is already set up between each remote desktop.

  I tried to add the other network to the ACL for the tunnel, but that did not work. I feel I'm missing something simple.

  For example, the following ACL initially.

  Note access-list 103 IPSec rule

  access-list 103 allow ip 192.168.15.0 0.0.0.255 10.0.0.0 0.255.255.255

  I added this line to this LIST.

  access-list 103 allow ip 192.168.15.0 0.0.0.255 192.168.100.0 0.0.0.255

  But that did not help.

  Thanks in advance.

  Hello

  What code are you running on the Pix. Talk to talk IPSEC connectivity is supported only in version 7.0 and higher.

  Enhanced support has spoke-to-Spoke VPN

  Version 7.0 (1) improving support communications a spoke-to-spoke (customer-to-customer) VPN, providing the ability to traffic to enter and exit the same interface. In addition, remote access to splitting tunnel connections can be completed on the external interface of the security apparatus, enabling traffic destined to the Internet for remote user VPN tunnels to leave on the same interface as it happened (after that the firewall rules have been applied).

  The same-security-traffic command permits traffic to enter and exit the same interface when it is used with the keyword a spoke-to-spoke VPN using intra-interface. For more information, see the section "Allows Intra-Interface traffic" in the in the command line Configuration Guide Cisco Security Appliance.

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_sw/v_70/70_rn/pix_70rn.htm#wp162358

  Example of Configuration:

  http://www.Cisco.com/en/us/partner/products/HW/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml

  Let me know if it helps.

  Kind regards

  Arul

  * Please note all useful messages *.

• Communication between two hosts on the host only

  I have a host ESXi 5.5 with two reviews, a Linux / Centos 6.5 comments and a guest Server R2 2012.

  I've muddled through many questions - time zone, being the biggest problem, but am confused on how to get these guests to see one another, not even sure what to put in Google.

  My goal is to be able to share files between the two guests and access their consoles with putty and RDP, but I can't make them one ping to another. Everyone on the LAN can connect these two guests, but they cannot see.

  A kind soul told me that I forgot?

  Thank you

  Hey katycomputersystems,

  Could you give us a quick screenshot of your vSwitch / Port groups.

  Of the IP information you should be able to ping to each of the systems if they are on the same vSwitch / Portgroup / VLAN.

  Try this

  vSwitch0

  VM Network - Port Group - VLAN 110 - physical Nic don't matter we will keep all the VMS on this port group

  Configure all your VMS on the port network of VM group.  As long as all the VM living on the same port group vlan and vSwitch traffic should never leave this vSwitch and each VM must be able to communicate with each other.  If not you can always ping each other take off the VLAN and try again.  Make sure also that you have no firewall or tables ip enabled on the operating systems that could prevent communication.

  Let us know how it goes

• How to enable wireless communication between two clients?

  I've got a WRT54GL with the latest firmware.  I have two computers that are both connected to the router with the IP via DHCP addresses.  Nor has a firewall running.  I can't communicate with them - even ping does not work.  I can ping the router itself by using the IP address assigned to this side WAN by my ISP.   Both computers have no problem to reach the internet through the router.

  What the router settings will allow communication to occur?  I can't find anything in the user interface of the router, which seems to control it.

  Thank you.

  I just figured out the problem: Isolation AP (in advanced wireless settings) has been activated.  I turned it off, and the problem is solved.

• Communication between two network cards on windows 2003

  Hi all

  I need your help.

  I have a machine virtual windows 2003 with two network adapters.

  NIC 1 - external - 192.168.1.101

  Map NETWORK 2 10.10.10.1 - internal -.

  I've configured to operate as a DC and DNS serving 10.10.10.x network.

  DNS is configured to resolve before on 192.168.1.1 as redirector DNS requests.

  I have other machines connected to the 10.10.10.x network.

  They can ping 10.10.10.1, they can ping 192.168.1.101 but not 192.168.1.1

  I want to just be able to talk to 192.168.1.1 and be able to access the internet.

  No firewall between the two.

  Command-line may help, but I would need your help.

  Hello Prasad,

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forum.

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer&filter=AllTypes&sort=lastpostdesc

  Hope this helps you solve the problem, if any question you can write us and we will be happy to help you further.

• Channels of communication between two applications?

  Hi Experts,

  Y at - it anyway (s) for two applications on the same device to talk to eachother? Something like a local socket communication?

  Thank you

  MoWriter

  Hi there did you look at this KB?

  http://supportforums.BlackBerry.com/T5/Java-development/communicating-with-other-applications/Ta-p/4...

• Communication between two EAR

  Hello
  
  I have two EARS, deployed on an application server. If I want to call a method in the object of the EAR 2 What are the options?
  
  Thank you
  CGI

  jtahlborn wrote:

  If the OP calls between the ears, local EJB calls should not be used. EJBs them must be used within a unit deployed (i.e. an ear).

  If the ears are in the same VM then local can be used. Local's VM not even the same deployment unit. If it of a good idea or not is another matter.

• Communication between two extensions of a bundle

  Hello

  I use builder extension 3.4 SDK with Flash Builder 4.6 on Mac.

  I have 2 extensions in my package that are properly created. The first is a model and a data that I need for my second.

  Is there a way to call the first extension in the second, getting the data you want? I am looking for a way to communicate between 2 extensions of the same whole. I think to create my own events...  Existing methods, how about in the SDK?

  Thank you

  A solution that has worked for me in the past is to communicate through events CSXS - your first extension would register a listener for some types of events, and your second extension would send events with this same type. Something like:

  A: extension

  CSXSInterface.getInstance () .addEventListener (B_TO_A_EVENT, myEventHandler);

  B: extension

  CSXSInterface.getInstance () .dispatchEvent (B_TO_A_EVENT, myCSXSEvent);

  If you require communication in both directions you can also add an event listener in the Extension B and the expedition of Extension.

  Hope that helps!

  -Louis

• Question of VLAN.  Communication between two Vlan

  Hello

  We have a network of laboratories.  My ESX Server has two cards on this segment under a Vswitch named Lab_Lan (under default vlan0).  We already have a few virtual machine running on this segment of the lab.  I would like to create two new vlan to simulate the two region.  But for what I understand him Vlan cannot communicate with each other easily. ?  We allow Vlan Trunk on the physical switch?  There is no way to do it in the ESX only... ? Perhaps via a software router?  I need these two new VLANs (1 and 2) can communicate with each other.

  Thanks for the help...

  Don't forget: If you find this information useful, please give points to "correct" or "useful".

  ESX does not routing for VM.

  You can do this with some switches, Layer 3, or with a device of linux that act as a router (with two interfaces).

  André

• Communication between two projects

  Hello
  I have two projects in my application, DataModel and UserInterface. In the DataModel package, I asked Modul where to add my custom code. In the UserInterface package I have custom Java class. Now I would like to access this class of Application Modul in the DataModel package. Y at - it anyway how to proceed? Because the import does not work in this case. Thank you.

  1. right click your project
  2. go in the project properties
  3. Select the dependencies
  4. Select your projects depended