Communication satellite U500 wifi switch control does not work

Similar Questions

• Satellite L300-22R - fan control does not work on Ubuntu

  Hello together,

  I have a problem with my Satellite L300-22R model PSLB8E-0QL028GR (Ubuntu 8.10) and the fan control. At first the fan does not work. After a few minutes, the fan operates at 100% until the laptop is turned off. I think it's a problem with acpi.

  The BIOSis: InsydeH20, worm. 1.60. There is not a more recent.

  Thank you for your support.

  Hello

  Is this laptop model is not supported for Linux and everything you find on the Toshiba download page (updates to the BIOS) is for the use of Windows XP Home/Vista edition only. :(

• Satellite U500 - 11G - wireless LAN does not work

  Please could some help me because I have a problem with the Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

  Whenever I turn on my laptop in the seem to do not to work. You put the laptop restarting and it works I tried to talk to the pc world, where I had the laptop but I seem to be hitting a brick wall with them.

  I had some other Toshiba laptops and never had this problem. I also will not download the date is

  Sometimes every reboot of the router can help. ;)

  Can you detect some other router in your area?
  Do not forget that the same protocol is enabled on the router and laptop.
  Often the small error in the WLAN settings is responsible for connecting Wireless does not.

• Satellite U500-1DV - recovery disk does not work

  Satellite U500-1DV
  When windows starts up the first time, and while Toshiba request is things installation and system configuration, Windows crashes and restarts the system.
  What can I do? It happens every time.

  Thank you

  It may be the laptop computer hardware problem or recovery disk.
  You can try to start the installation using another disk installation disc for example clean Microsoft Win 7.

  If the installation would be functions, then your laptop s material should be ok and the problem is with the recovery disk

• Satellite P100 remote control does not work

  Hello

  Guys, I bought a toshiba satellite p100 and the remote with it does not work...

  no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

  Help, please...

  Thank you...

  Post edited by: qazam

  Hi Qazam

  How did you test the remote control?
  What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

  I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.

• Satellite X 200 - after upgrading Vista remote control does not work

  Hello

  I have upgrated my Vista Home Premium to Vista Ultimate and the remote control does not work. Well upgraded... I bought Vista ultimate and it installed.

  Is there a driver for my remote?

  You may need to install the infrared driver.
  This driver is required to activate the infrared port on your laptop.

  You can find it here in the X 200 section
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Re: Satellite L500 iCQ, as Volume Rotary control does not work

  Front volume control does not work. Volume is set to maximum and can only be controlled by the mouse and the slider control.
  Can anyone help?

  To be honest I don't think that anyone will be able to help you with this.
  As far as I know that's not used such mechanical volume on older models of computers laptops, but electronically part controlled by software, so the only thing you can do is to test the functionality with the settings and see if the problem will be the same.

  What else can you do? I do not know. Maybe update the BIOS, but I do not think that this will help you.

  Do you use pre-installed OS original you got with your laptop?
  Have you made some changes or anything that can have a negative influence in this?
  Since when you noticed this strange behavior?

• My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

  My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

  Original title: control sign Vaio

  Hello

  According to my research, the actions must be enabled for individual applications. Check out the following link and activate the gesture for Power Point and Cyberlink PDVD.

  https://us.en.kb.sony.com/app/answers/detail/a_id/36487/~/how-to-configure-vaio-gesture-control-settings.

  For more help, you can contact Sony support.

  https://community.Sony.com/?XID=M:kb_header:eSupport

  Hope that the information provided is useful. Do not respond if you need more help.

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Satellite Pro P100: remote control does not not-> error ' cannot be read handle. ".

  Hello

  My Satellite Pro P100 began to show the error "Failed to read handle." at startup. I found a related post and removed from the area of registry Toshibarc.exe control startup programs. This does not prevent the pop-up dialog box, but now my remote does not work.

  Does anyone know if toshibarc.exe must run for the remote control work? And if so, how do I fix the error in the program (rather than simply removing from the register). Could this be a hardware problem?

  If I try to manually run the C:\WINDOWS\SMSC\CIRHID\V1_0_0000_0\toshibarc.exe, I get the same popup "Impossible to get read handle.".

  Thanks for any help or ideas
  Steve

  After a long period of investigation in the internet and visit many Web sites, I discovered that the ToshibaRC.exe file belongs to the Remote Application from Toshiba. It seems that the file is required to use the remote on the laptop...
  But I can't give you a reason why it causes an error.

  I found this similar thread in the forum
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16959

• Satellite M40X - CD/DVD control does not

  I've had my laptop a few months back and the controls have not worked since I got it. Is it a software problem that I can fix it, or something else? I tried to update the software for him, but he did nothing. I have an extra monitor currently connected, does it affect it at all, because it seems to prevent the standalone DVD player work when it is connected.

  PS. any way to get the controls to work for iTunes?
  Thank you

  Hello scot

  If I remember right on your unit is pre-installed Express Media Player. This drive is installed on the small hidden partition and you can use it without booting the operating system. I'm sure that these buttons can be used only with her. Please test.

  The same Satellite M40 a and I know that everything is described in s operating manuals. I'm not 100% sure but I think there is no chance to use with external devices.

  Good bye

• P850 satellite and a WiFi - internet connection does not work well

  Hello

  My internet connection does not work with a Wi - Fi connection.
  I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

  All solutions?

  > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  If such a problem would appear again start the console (window BACK in typing CMS in search)
  Here, use the command * ipconfig / renew *.

• Satellite U500 - the volume buttons do not work

  Hello

  I just bought a Toshiba Satellite U500 two days ago and already problems :(

  It has a control buttons sensitive contact, which includes the eco, the media buttons and the volume control utility (+ and -)
  The volume buttons do not work, and sometimes the computer crashes to their contact. Once I touch the-, he begins to turn volume down until it reaches zero, and even if I turn it up using windows, back to zero (as if the button is still depressed). The + does not work.

  Help, please. Is it possible to re-install the drivers?
  The only solution I found is to disable them using HWSetup...

  Great news. Thanks for the comments!