communication with agilent 33522A

Hi all

Please can someone help me communicate with my instrument named below (agilent 33522A)

What do I need exactly please (drivers, hardware)

Thank you

Here is an article in the knowledge base that helps solve your problem of GPIB communication. Have you seen this before?

http://digital.NI.com/public.nsf/allkb/A80DBFCCAC36EBDE862562C80058856E

Best,

Doug

Tags: NI Hardware

Similar Questions

  • with Agilent 33522 A data acquisition

    Hello everyone

    When you use the driver NOR-daqmx (for the acquisition of data with agilent 33522A) what material should I use and configure please (map name)

    anything that could help me please

    Thank you

    The cable surrounded in black looks like a USB-GPIB cable. You can use a NI PCI-GPIB and GPIB cable place for as long as you have a PC with an available PCI slot. If you connect via GPIB, you use DAQmx, as Intens said.

  • Problem with getting communication with old instrument GPIB-ENET/100

    Hello!

    I'm trying to get my program in VB.net to communicate with an older instrument (Infratek 305 A, measure of power) via a GPIB-ENET/100 device.

    The manual of the instrument does not say what GPIB standard, it supports, but the instrument is detected by the measurement and Automation Explorer.

    Detected by that I mean that MAE has detected an instrument located on the right GPIB address, but indicated identification is the output measure instrument string

    instead of the name of instrument (as shown for some more recent instruments of Agilent).

    When I run my application, I followed the communication with NISpy.

    Configuration of the device seems to work and I present only once in the program.

    The problem is reading data from the instrument. Whenever I read the data, I get a correct string of the instrument. But the problem is

    I get the same data in two consecutive and all readings first after that I get new data and also these new data are received in two consecutive readings.

    According to the manual of the instrument the instrument generates the data as follows:

    "A row of data ends with CRLF. The instrument can send multiple rows of data. "When all of the data transfer is complete the EOI (end or identify) is sent.

    My endpoint settings are:

    Send EOI to write complete: YES

    Terminate read on EOS: No.

    EOS byte: 2

    8 bit EOS compare: YES

    Define EOI with EOS on write: No.

    How can I configure the GPIB-ENET/100 to work with my instrument?

    Here are som NISpy logs:

    # Configuration #.

    61 ibwrt(UD3, "C0C2C4C8..", 10 (0xA))
    PID: 0x0000113C Thread ID: 0x000008B4
    Departure time: 13:54:43.671 call duration 00:00:00.079
    ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

    62 ThreadIbcntl()

    PID: 0x0000113C Thread ID: 0x000008B4
    Departure time: 13:54:43.750 call duration 00:00:00.000
    ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

    63 ibwrt(UD3, "K0K3K5K9..", 10 (0xA))
    PID: 0x0000113C Thread ID: 0x000008B4
    Departure time: 13:54:43.765 call duration 00:00:00.125
    ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

    64 ThreadIbcntl()
    PID: 0x0000113C Thread ID: 0x000008B4
    Departure time: 13:54:43.890 call duration 00:00:00.000
    ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

    65 ibwrt(UD3, "F14F18F24..", 11 (0xB))
    PID: 0x0000113C Thread ID: 0x000008B4
    Departure time: 13:54:43.890 call duration 00:00:09.250
    ibsta: 0 x 100 iberr: 0 ibcntl: 11 (0xb)

    66 ThreadIbcntl()
    PID: 0x0000113C Thread ID: 0x000008B4
    Departure time: 13:54:53.140 call duration 00:00:00.000
    ibsta: 0 x 100 iberr: 0 ibcntl: 11 (0xb)

    ### LU ###

    437 ibrd(UD3, "*AC/1.0A480V/...", 1024 (0x400))
    PID: 0x0000113C Thread ID: 0x000008B4
    Departure time: 13:58:52.484 call duration 00:00:00.094
    ibsta: 0 x 2100 iberr: 0 ibcntl: 225 (0xe1)

    438 ThreadIbcntl()
    PID: 0x0000113C Thread ID: 0x000008B4
    Departure time: 13:58:52.578 call duration 00:00:00.000
    ibsta: 0 x 2100 iberr: 0 ibcntl: 225 (0xe1)

    439 ThreadIbcntl()
    PID: 0x0000113C Thread ID: 0x000008B4
    Departure time: 13:58:52.578 call duration 00:00:00.000
    ibsta: 0 x 2100 iberr: 0 ibcntl: 225 (0xe1)

    Hello!

    I don't have the opportunity to test with other controllers.

    However, I found a solution to my problem.

    The instrument should output 4 lines of data.

    L1 - line with comments

    L2 - line with current values

    L3 - line with the values of voltage

    L4 - line with power values

    The first line of the reading stops the instrument of implementation of additional measures.

    The measurements in the instrument began reading the last line of data (L4)

    The problem was that the instrument for a reason any also released a fifth line, which was empty.

    Read this line 5' th stopped the instrument again.

    By configuring the HW to finish reading on EOS, with EOS PMQS, the value byte, I could read the

    buffer of the instrument with a line output instead. This way I could read just L1 - L4

    and the instrument could work again.

    Next time I should read data from the Instr. first of all, I would like to read the empty line, then

    L1 - L4.

    Why the outputs Instr. an additional empty line will be left not resolved.

    My problem is solved.

  • My ipad 3 has stopped communicating with my airport extreme.

    My ipad 3 has stopped communicating with my airport extreme.  I rebooted, both so that made a network reset on the ipad.  He sees the airport but does not connect.  It will work on the personal hotspot on my phone.

    Hello

    If your ipad works with a hot spot that's the Aiirport is the problem

    Go to the Apple Web site

    support. Apple.com

    You may need a software update for airport how old is this do you have another

    Router, you can try?

    See you soon

    Brian

  • I removed Applian freecorder in my programs, but I find myself with a toolbar of community with a button for Freecorder help page. How can I get rid of this, preferably on the entire toolbar

    I installed and now have uninstalleda Applian program (freecorder I think) but find myself with a toolbar of community with a button leading to the theFreecorder help page. I don't want the additional toolbar or button. How can I get rid of him? I tried to remove and reinstall Firefox, but this has not done it.

    Hello

    Please try to go to Tools (or Alt + T) > modules, Extensions , click on the left and if it is listed on the right, delete it. Otherwise, you will need to go to Add/Remove Programs in the Control Panel of BONE and remove it from there.

  • DASYLab is not communicating with the hardware dbk25a3

    Hello:

    I'm trying to troubleshoot a high pressure processing equipment. This system uses a PID controller. The level of pressure does not stop at the set point, but continue to increase. I am trying to solve this problem. As the program was written by someone else and there is no documentation on what each represent module and done. It is very difficult for me to solve the problems. Therefore, I decided to start all over again with my own module.  However, I have a problem. My hardware (DBK25 and others) is not communicating with the module of Dasylab. I tried several different things, that nothing seemed to work. I get this error.

    DBK25A3O

    An entry of a module is open.

    Any help is highly appreciated

    Thank you

    Krishna

    The error message indicates that you have a module that has one input open - nothing is connected. You must have a data wire to all entries.

  • SPI Communication with PIC24HJ256GP210

    Hello

    I need make the SPI Communication with hardware PIC24HJ256GP210 in LabVIEW 2010 with NI USB 8451.I want to send 8 bytes data and receive data of 8 bytes of PIC. I'll send data byte-by-byte change the signal of the chip Select (CS). Before you send the data I will send ENQ (mark 3A) to check the status PIC, then after receiving ACK (Acknowledge as A1), I will send the data packet.

    My test procedure indicated below,

    • Setting clock polarity at zero (LOW idle), a second Edge clock Phase) and the clock frequency of 1 MHz to device NI USB-8451

    • 3 sending data (ENQ) and followed meaningless data byte by byte, also change state Chip Select

    • No explicit deadline has provided since the sending of the API takes 20msec to run

    • Receive the acknowledgment of receipt (A1) of the sensor

    • Send DataPacket [Eg: A5, 03, 02, 00, 00, A6, 2 c, DD] byte by byte, also changing chip select signal

    • No explicit delay gave between each byte from API takes 20msec to perform sending

    • Send 8 bytes , which means less data byte-by-byte, and receive byte-by-byte data PEAK

    • Received all of the data of 8 bytes with an incorrect value

    If please review my test procedure and give your comments if you have worked with SPI or if you have any input for my query.

    Thanks in advance.

    Note: Tie my code with this mail for your reference.

    Kind regards

    Nicolas.

    Hello O_Proulx,

    Thanks for your reply.

    Communication SPI after sending the data we send again meaningless bytes, which equals how many bytes we would like to receive the answer System.So we cannot read the data in the same VI as you mentioned in the code.

    My problem has been resolved. Byte meaningless, I need to send the file HEX .beacuse 'AB' has been developed in this way.

    Kind regards

    Nicolas.

  • RS 232 communication with a projector

    Hello! I work in communication with my prjector. The controls are pretty simple, just PWR it for OFF\r PWR to turn off and LAMP? How many hours have the lamp worked \r to land the aircraft. So I just used the example of the writing/reading series with labview, but had a few problems.

    1º) it works but it keeps giving me an error, I can't handle. Is the current operation of visa wait time. I tried it here and all the people say something on the lines of commands, but I put them and set up in the port, so I don't really know how to handle this error. Another thing, it is how can I put \r or 0xD for my end of just the default write command?

    2º) how can I make my request just be an exe that you don't have to press ' EXECUTE ' always to use it?

    3º) my last question is to ask questions about how to manage this thing, I need to read used with the control LAMP lamp hours?, and projector will answer me with something like: LAMP = xxx. How to handle this response to send it via TCP/IP? Should I have to create a new variable or something? I mean, I just need with another application in order to power switch of the projector via tcp/ip and calling hours of lamps via TCP/IP, so I don't really know how to handle. Thanks for all the peoples and let me know if you need more information, I'm not native English sorry for my mistakes.

    Edit: I forgot to put my vi.

    1. you will obviously get a timeout when you send the commands that do not generate a frequency of the instrument. Only do a reading when you send the LAMP? interview and to automatically send \r, set the stop to "0 D" character.

    2. you have the app Builder to create an exe file. In order to make the VI automatically running, go to the properties of VI > execution and check "run then '.

    3. I do not understand. First, you talk about RS - 232 and now you want to convert this TCP/IP communication VI?

  • Checking the status of communication with NI DAQmx or NI6143

    Hello world
     
    I'm working on checking the status of communication with NI DAQmx or NI6143 in Microsoft Visual Studio 6.0 C++ on Windows XP. The communication situation is checked between the DLL and the NOR-DAQmx/NI6143. I wonder what is the command for the control of communication for NI DAQmx or NI6143, and if there is no code available. Any suggestion or advice is greatly appreciated.

    Thanks in advance.

    There are many examples available on your computer that install with NI DAQmx. For examples in C/C++, follow the steps listed in this white paper:

    http://www.NI.com/white-paper/6999/en

    If you are new to data acquisition, that I suggest using LabVIEW. LabVIEW has several examples to begin to use a data acquisition equipment. To find them, open LabVIEW and select help > find examples... > Input and Output material > DAQmx.

    As a note of clarification, NI DAQmx is the driver used to communicate with your device (NI 6143). You do not communicate with OR-DAQmx itself, but use it to send commands and receive data from your device.

    Cameron T

  • Labview compared with Agilent Vee Pro

    Hallo! Could someone show me the key benefits of Labview compared with Agilent Vee?

    Thanks in advance!

    A lot of old debates. Start here, and then follow the links.

    What type of project do you need to face?

  • Can someone help me on action with agilent 34970-34901 has continious

    I need assistance with 34970-34910 has continious measurements. Everyone says that you need to configure "Agilent 34970 has advanced Scan.vi". I have modified this vi to measure temperature and pressure (current) but I could not go a sterp before measuring very. How can I do this? I have attached the vi that I modified.

    I solved the issue of measuring continuous with Agilent 34970-34901 has. All my error is in the configuration of the usb serial port. To the continuous measurement, the flow of control of the usb serial port configuration must be implemented as 'XON/OFF' and the same setting should be made in the vi. You could measure temperature/voltage/current at the same time by doing this.

  • Modbus communication with a piezoelectric dynamometer

    Hello..!

    I am a new user of LV and I try to communicate with a piezoelectric dynamometer in modbus RS232.

    After you install NI Modbus Library, I created a master VI with labview 8.6 using these libraries and I can get communication with scale, these values are added in the registry U32Bit 1 and it's good, if I press a load cell, I can see the values exceed. (from 0 to 65535). Now, I want to show on the front the weight in KG, as the decimal separator, for a proper interpretation of the value for my client, so I added a block table to unbundle that I convert a value with I32Bit (-32768 a 32768) with a flag, but I don't see not all values...

    I guess I did something wrong (conversion), I read a few KB, but I do not see a solution...

    Can someone give me a link or information to show me an example to convert this value... ?

    Thanks in advance for any help to...

    Configuration of master VI:

    Read now register

    Address starting 2012 (query to get the net value of the load cell)

    Quantity 1

    Slave address: 1

    RTU

    9600

    3 com

    parity none

    Can you post some examples of bytes you receive from the Modbus read and you expect that these values are?  It's probably just a matter of the right of casting, or the number endianism, or operation of scale that must be done.

  • Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

    Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

    Hello

    Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

    Please answer the following questions that would help us provide a better solution.

    What version of Windows are you using?

    Try to follow the steps and check:

    Step 1:

    Visit the link following if you are using Windows 7.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    If you are using Windows Vista, see the steps mentioned in the link.

    http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

    Try the steps from the link following if you are using Windows XP.

    Resources for the resolution of the printer in Windows XP problems

    http://support.Microsoft.com/kb/308028

    Step 2:

    Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

    You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Put the normal computer as mentioned in step 7 of section.

    Step 3:

    About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Please feel free to respond if you have any other questions, we would be happy to help.

  • Games on the Internet give the error "a network error occurred during communication with the game server. "Error code: 0 x 80041006.

    I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.

    Actually, no, the answer in the links were also less than helpful... suggested this, that.  Things that I had already done b4 posting my question.
    More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again.  Coincidence? No doubt, but still...

  • My laptop has stopped communicating with my CD/DVD drive

    Why my laptop stopped communicating with my CD/DVD drive, D drive?  When I put a CD in the player it swirls, light comes on, but there is no indication on the screen. I bought an external CD/DVD drive that plugs into the USB port, but he did not see anyone.

    Hello

    Glad to know that you have addressed the issue. Your efforts to solve this problem is appreciated. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

Maybe you are looking for

  • iOS 10 no signal problem

    I have an iPhone 5s (model 1533) and after the update to iOS 10 I can't get a signal, I tried a full restore and update and also reset network as well as the obvious reboot. First, he would get a signal a little while but if I tried to make a call, i

  • Re: Qosmio G20: DVD-RAM UJ-845 s does not read CDs or DVDs

    I'm a big supporter of Toshiba product. Please help me Given that I had to do to update form my * Toshiba Qosmio G20-123 *.My * DVD UJ-845 s * do not read any CD or DVD.Before that, he worked a lot of good. But unfortunately now, he does ' t read any

  • Problems restoring 64 bit Windows Vista - sfc/scannow still find things to fix even if run multiple times in a row

    I had a hard drive failure; However, the operating system has been on another disk, a 250 GB SSD. After replacing the faulty discs, I tried to move Windows Vista 64 bit to a larger 512 SSD concert. I keep running into problems with these efforts. To

  • My new ViewSonic LED displays 'signal' when it is plugged

    I recently bought a ViewSonic LED monitor from amazon (option to come back, would rather try to fix first) and it is supposed to be the second monitor. I have my operating system and went to plug the new viewsonic, I now have almost identical 2, the

  • Substitution of WLAN in CLI Config

    I currently have the box to open with TAC where my LWAPs lost their substitution parameters. The solution I gave is to manually add the SSID for substitution via the user interface settings. The GUI sucks for that. Can't search for text and that you