CommView for Wifi pilot

Try using the 4.2.2.104 network card driver (AR5006X) also called net5211-Commview for Wifi - but the Device manager says that there is something wrong and gives me code 10.  I have the Atheros 5007 802 WIRELESS network adapter. 11 b/g.  At first, I thought maybe that the pilot was not compatible with my card, but I looked on the site of tamos, and my card is indeed supported by commview for wifi.  So basically, every time I install the 4.2.2.104 driver, my WIFI is turned off and I can't connect to the internet.  Tamos site said that I could use commview for wifi in dual mode, so I don't know what is happening.  I have vista, is this why? Help?

Hello TA1LGUNN3R, welcome.

I have confirmed that your adapter is supported:
"Atheros Wireless Network adapt (AR5001 through AR5007).

My recommendation would be to try this driver I put together located here:
http://sites.Google.com/site/pwdionline/home/Atheros5007x7.7.0.329whql.zip?attredirects=0

Should not be a Vista issue, as this card has been reported to run without problem.
What is the service pack level are you running out of curiosity?

Thank you!

Tags: Windows

Similar Questions

  • Satellite L350-277 - update the new BIOS and Wifi pilot

    TEMPRO gave me 2 new drivers, but received instructions.

    BIOS setting has been an operation involving the driver of the copy on a disk and then to change to start with disk boot order.
    However, I think that the new BIOS drivers are installed with running Windows - like a normal program. Does anyone know for sure?

    I guess the wifi pilot is a normal installation, with the wifi on or off?

    Hello

    Just a question;
    Is an update of the driver WLan and BIOS update needed?
    I mean; you have problems with your laptop where these updates would be necessary?

    You should not update if everything is OK. in most cases the Tempro informs you about the drivers and tools that are uploaded on the page of the driver, but it is not a recommendation for an update, you know what I mean?

    I'm always this trick; never change a running system.

  • Pavilion 15 AB205TU: WIFI pilot missing 15 HP-Pavilion ab205tu

    I bought the HP Pavilion Notebook 15-ab205TU July 22 2016.when I tried to connect to the wireless (WIFI) network he did not to any connection and asked to connect to the internet using LAN? I opened the Device Manager and discovered that there is no driver for wifi available. It has not been 6 hours since I bought it and the first time I opened it does not connect to wifi.

    Hello:

    I see that your laptop came with FreeDOS.

    You should be able to use the W8.1 drivers and software ab000-15 t on your model, except the BIOS and firmware files.  Use the latest graphics driver Intel traded (the date by the exe file).

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-ab000-notebook-PC-series/7771366/model/8542715

    Your model has the Intel Dual Band Wireless-AC 3165 802.11 adapter ac 1 x 1 WiFi and Bluetooth 4.2 combination WLAN.

    You need get the W8.1 directly from Intel wireless driver.

    Wireless: a 2nd down on the left is for 64 bit

    https://Downloadcenter.Intel.com/download/26149/Intel-PROSet-Wireless-software-and-drivers-for-Windows-8-1-?product=89450

    Bluetooth:

    This package contains the installation package driver for the Bluetooth of Intel in the laptop models running a supported operating systems.

    File name: sp74472.exe

  • I have 2 routers.  Both can have time capsule for wifi?

    I have a Netgear C3000 Modem/Router, where my internet comes from the wall.  I also have a router VPN Sonicwall for work.  My sonicwall going through my Time Capsule for wifi.  Recently, I upgraded my internet speed with my ISP to 150.  When the internet is channeled through two routers, the speed is quite slow (about what it was before the upgrade).  When I get wifi directly from my Netgear, the speed is much faster.  Can I have 2 sources on the internet through my Time Capsule?  1 for the work (slower wifi) and 1 for home (faster wifi)?

    Can I have 2 sources on the internet through my Time Capsule?

    Unfortunately, the time Capsule cannot handle this... because it would need to have two WAN ports to be able to handle two Internet connections. Since then she has only one, you will need to decide which source you want to use with time Capsule.

  • How do I turn on the radio for WiFi connection?

    My Tecra A2 has a switch for WiFi but I can not know how to market.
    The OS is XP Pro with SP2

    Hi Frana

    Can you tell me what type of processor your device? Pentium-M or Celeron?
    As far as I know WiFi is available in models of Pentium-M and not in Celeron models.

    Good bye

  • I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

    I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

    You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

  • for got password for wifi

    I forgot the password for wifi

    so, how can I change password

  • How can I change the password for wifi on Apple TV 4?

    I changed my password for wifi and when I go into settings wifi on Apple TV, the network is there, but when I click on the name of the network, nothing happens.  He asks me the password.  It was a half hour and it still does nothing.  I tried to do a system restart and still nothing.  How can I change the password so I can reconnect to my network?  Is there a way to tell him to forget the network as on my iPad and iPhone?

    (btw, I changed the password to "*".)  I feel like the punchline of a cosmic joke.   )

    Do a reset.

    Also, not a good idea to post your password on a public forum

  • Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

    Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

    Superior...

    After all, the chip is mainly a modem.

    Wireless is there but not designed as the primary connection.

    Wireless 802.11n 300Mbps AP with 2 x 2 MIMO Wireless bridge, WDS multiple SSID, including isolated invited SSID WiFi QoS (WMM) and PowerSave wireless security: • Wi - Fi Protected Access (WPA, WPA2) • AES, TKIP, WEP encryptio

    It is the Wireless N standard.

    The TC is dual-band simultaneous AC1750... even if in fact apple never leaves anything use 300mbit on the 2.4 GHz is more like AC1450... It is also 3 streams on both bands not 2 x 2.

    The fact that aid.

    The only thing to note is that a router from Apple can join never a router wireless not apple... so, there must always be plugged in by ethernet.

  • T520. What to install for wifi

    Hello. I t520 (Win7 64) and I was wondering what I should install for wifi.

    I installed ThinkPad 1 x 1 11 b/g/n Wireless LAN PCI Express Half-Mini Card adapter for Windows 7 (32 bit, 64 bit), Vista (32 bit, 64 bit), XP Version: 1005.32.306.2012 and it turns out be enough for the job of wifi.

    Does make sense to install Intel Wireless LAN (11abgn, 11bgn, 11ac) for Windows 8.1 (64-bit), 8 (64-bit), 7 (32-bit,) 64-bit - Version: 16.6.0.8/15.10.4.2/15.9.1.2?

    Thank you

    Lenovo has used several other wireless card for the T520. What mithunr said, is that if you have the ThinkPad 1 x 1 b/g/n card, then you will not be able to install the adapter driver WiFi Intel.

    Each wireless card have their own driver for the wireless card, you can not install driver wireless card intel on a computer with ThinkPad 1 x 1 b/g/n and vice cersa card.

  • PIXMA PRO 10 can not configure for WiFi

    Everything works fine on USB key, but I can't seem to configure for WiFI. I am using the recommended network driver

    MP68-victory-mg3200-1_02 - ejs.exe

    but for some reason some it does not detect the network. I use Xfinity and have the router SMCD3GNV. I have a printer HP on WiFi but no luck with this one. I don't have the original CD that came with it I bought it used and the seller couldn't find. Is there a better network driver? Thanks, Jim

    Hi, Jim!

    Thanks for posting on our forum! This community is designed for Canon owners your colleagues help each other any problem they may encounter. If it is a question of time-sensitive, contact our technical support team at the United States is the most effective way to get these issues straightened. They are standing, ready to help you 24/7 by Email http://bit.ly/Canon-Support or by phone at 1-800-OK-CANON (1-800-652-2666) Monday to Friday between 10:00 and 10: 00, et (07:00 to 19:00 PT).

    Thank you and have a great day!

  • installed windows 7 64-bit on the Acer Aspire E5-573 but drivers for WiFi, VGA is not found

    I installed windows 7 64-bit Home Basic but drivers for WiFi, VGA is not found on the Acer site.

    When installing driver VGA of Windows 8.1 of intel Acer site for E5 - 573 on windows 7 64 bit OS then camera photo and graphic development works but USB ceases to function, another camera doesnot work.

    Customer service Acer told me that it will support only simple windows version 8.1 Professional and non-windows 10.

    Please suggest drivers for WiFi, Bluetooth, VGA etc for windows 7 64 or 32-bit.

    1 Atheros QCA9377

    https://www.Atheros.cz/Atheros-wireless-download.php?chipset=104&system=5

    Click on the "click to Download" and wait until the download starts

    2 Intel Management engine

    Try this

    https://Downloadcenter.Intel.com/download/24499/Intel-me-10-management-engine-driver-for-Intel-NUC

    or this

    https://Downloadcenter.Intel.com/download/22093/Intel-me-8-management-engine-driver

    3. realtek card reader

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  • WiFi pilot (hard key F12) problem

    I can't find drivers for wifi button (F12) hard... using windows 8 (32-bit)

    Hello:

    See if this driver works...

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124774_1%257CswEnvOID%253D4131%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • How to change my password for wifi on my printer Canon MG 2950

    How to change my Wifi password on my printer Canon MG 2950

    Hi Piet,

    Thanks for posting your query on the Microsoft Community.

    According to the description of the problem, you are ready to change your printer Canon MG 2950 WIFI password.

    Before connecting your PIXMA printer to your wireless network, check that you meet the following two conditions:

    1. Ensure that you have an access point (sometimes called a router or a hub) through which you get an Internet connection. Your access point must be fully functional before proceeding to the next step.
    2. Make sure you have a computing device, PC, Mac, tablet or Smartphone, here referred to as a computer that is connected to the Internet.

    I suggest you to return the item mentioned below and see if it helps allows you to change the password for WIFI.

    Setting up wireless PIXMA MG2950

    Use of the Machine with the Access Point Mode

    Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

    Kind regards

  • How to change password for wifi I phone 4S help?

    trying to connect on apple apps for getting the message wrong pasword but I know its right, I'll change the wifi password if someone will tell me how I have a netgear wireless modem

    Hi joegreco,

    Welcome to the Microsoft community. According to the description of the problem, you want to change the password for wifi.

    Make sure that you provide the password.

    You can connect to the web interface of the router with the administrative law and reset the password. For information about how to do this with the router, please consult the router's manual or contact the manufacture of the router.
    You can also do a hard reset on the router back to the default factory settings. Please consult the manual of the router or the router manufacture.

    For apple iPhone apps cause contact Apple support for assistance.

    I hope this helps. Let us know if you need more assistance.

Maybe you are looking for