Como hacer funcionar a device con puerto usb using firewire

Hola tengo una marca audio graphical M-Audio http://la.m-audio.com/products/es_la/FireWireSolo.html than tiene una conexion firewire pero tengo referencia a lenovo pc all-in-one c225 con win 7 profesional y este no tiene firewire puerto, against a cable are al parecer UN convertidor firewire-usb al conectarlo el device none are representatives Québec puedo hacer in this case I need a driver para lo o como could usually connect mi graphical recognize what?

the agradeceria una respuesta ojala en Español gracias

Hello

See this page to select your language:

http://support.Microsoft.com/common/international.aspx

====================================

Or sorry that it is area English.

Left click at the bottom of the Microsoft Community page

English and set your language.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • Como hacer funcionar IL 2 1946 Sturmovic.

    Tengo el el juego IL 2 1946 Sturmovic of Ufisoft original DVD. Esta pensado para ser used in Window XP.

    Yo tengo Windows 7, y durante 10 dias lo pude use. Desde entonces dejo leerme el DVD, not sell me any type of aviso, parece no reconocerlo.

    No tengo restablecerlo modo, if alguien sabe algo para el problema thank the delivery.

    Hello

    See this page to select your language:

    http://support.Microsoft.com/common/international.aspx

    ====================================

    Or sorry that it is area English.

    Left click at the bottom of the Microsoft Community page

    English and set your language.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I NEED SPEED CONTROL A 120 V UTILIZANDO LABNIEW CON POR EL PUERTO USB PID MOTOR

    : manindifferent: HOLA A TODOS, ALGUIEN CAN help ME A PROGRAMAR EN LABVIEW EL CONTROL OF SPEED OF ONE MOTOR DE CORRIENTE ALTERNA OF 120V. I NEED THAT TENGA EL PID Y Q SE RELEASE POR EL PUERTO USB CON EL PIC 16F628A U OTRO MICRO... ESTE ARE A HMI PROJECT...

    GRACIAS POR SU POST... :-)

    Hola Barcelona

    No you tiendo very well the pregunta respecto a en parte that need help.

    Respecto a lo del PID against este foro el cual tiene links in con PID information y controls Motors DC aunque vayas a usar para a CA, information engine you can be util además TR el control going to use usas UN PWM igualmente you serviria mucho gran parte the ahi esta info.

    Command PID made al control of DC motors

    Respecto al PIC the Comunicación y, mi primera mid-week seria using a PWM con UN cDAQ o una tarjeta and NO esa manera you mas eficiente el sistema control resultaria. Lo contrario seria UN media series utilizando el cable USB utililzar. O the third option you puedo recomendable usar UI an Arduino para which are hay una libreria Comunicación con cual ordered using LabVIEW seguir y UN mircontrolador sin tener as complicarte mucho.

    OR LabVIEW Interface for Arduino Toolkit

    I hope this information you sea util

    Saludos

    R. Esteban

  • Como hacer para that el ares sea compaible con windo 7? Instale el programa y no puedo por each me appears a message don't con el cuadro windo el no esta designed para run one

    Como hacer para that el ares compatible sea don't con windo 7 instale el programa y no puedo porque each me appears a message don't con el cuadro windo el no esta designed para run one what no compatible pero are no antes usaba well mas lo lo

    Choose your correct language with this icon English at the bottom of this web page.

    Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

    Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

    Make older programs in this version of Windows (Windows 7)
    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Help with Windows 7 compatibility issues
    http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

    Windows 7 Compatibility Center
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  • Los puertos usb mi pc no retomarse las usb than hago para corregir esto

    Los puertos usb mi pc no reconosen las memorias usb, if miro los puertos usb me dicen as how no reconoce pero correctamente las memorias usb, aunque TR reconoce el control... that debo hacer juegos para

    Hello

    Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

    http://support.Microsoft.com/common/international.aspx

    Thank you

  • Conversor puerto USB a series

    Necesito UN driver para el conversor puerto USB series; Marca "EDGEPORT/1 '.

    Hello

    See this page to select your language:

    http://support.Microsoft.com/common/international.aspx

    ====================================

    Or sorry that it is area English.

    Left click at the bottom of the Microsoft Community page

    English and set your language.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Acer XC-605. I have a wireless usb device and a usb dongle. Can I replace my w wireless card

    Acer XC-605. I have a wireless usb device and a usb dongle. Can I replace my card without extra wire with usb3 Sockets. If so, should what material I go for? Front Sockets have been botched again and are now worse thn useless. Thank you.

    Thanks Asdfguy86. The map you suggested was not good because it was full of size, but, thanks to your liknk, so I knew what to ask and what seearching I just added "low profile."

    My search came up with this https://www.amazon.co.uk/gp/product/B008N3FPXS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

    This has also been enlarged but came with an alternative mounting plate.

    There is a free space above so I was able to move my antenna wi - fi so far and release the slot for pci express to the new card usb3 so I was even able to keep my embedded wireless and bluetooth. What a result!

  • my USB not conectec driver doesn't instal no eror show usb device not shown usb me

    My usb device does not show eror conectected lock me eror see the

    Hello

    1. What is the accurate and complete error that you receive when you connect the USB device to the computer?

    2. what USB device you have connected to the computer?

    3. are you having problems with USB devices or specific USB device?

    4 you did changes to the computer before the show?

    Please provide more information on the issue so that we can better help you.

    In the meantime, you can try the steps of troubleshooting provided in the links below.

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

    http://support.Microsoft.com/kb/925196

  • Toshiba laptop A105-S1013 msg device not recognized USB.

    will not recognize usb keys.

    right now, I don't have connection capabilities as I am waiting for AT & T to connect with DSL.

    tried to connect to a wireless Belkin device but the USB does not recognize the he or the Belkin drivers on another device.

    find WiFi driver update on the Toshiba site. will try and install from a cd that this update talks of G which seems to me the minimum required here in our mobile Park that requires WiFi.

    Also will try to connect to the library or McDonald's today.

    Is there a way re install the software for the USB that comes with the CD of the OS? I also searched on Toshiba, but there is no update for the USB driver.

    Last January, I re installed Windows XP on this laptop and at that time there all worked as it should. Now, we're back in the Park and the laptop was not for months and it all started with the USB recognizing one of my memory sticks.

    Thank you.

    Larry

    Hi Larry,

    Follow these methods.

    Method 1: Follow the steps in the article.

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

    Method 2: Update the chipset drivers.

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

  • computer fails to install the hardware device connected to USB

    computer recognizes the new device but said device is configured incorrectly (code i1) It does not install the driver for the device. The USB port works OK with a mouse and a printer. It will not install the items include a wireless, software modem mobile camera and flash drives. All these work OK on another computer. It seems that for some reason any driver is not installed when connected to the defective computer. The driver file to be installed is c:\windows\system32\drivers\usbstor.sys

    Hi dorothy.k,

    1. did you of recent changes on the computer?

    2. What is the exact error message that you receive when connect you these devices to the computer?

    3 - is the first time that you connect these devices to the computer?

    4. the other computer have also Windows XP installed?

    Method 1

    See the link below and run the fixit tool available, check if it helps.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2

    Check the status of the device to the computer by using the Device Manager and later, see the Microsoft article below and according to the error code try the steps mentioned in the article.

    Explanation of error codes generated by Device Manager in Windows XP Professional

    http://support.Microsoft.com/kb/310123

  • How can I save the audio settings for a USB device on all USB ports?

    I have a USB minimic and need to trigger the MCO. However, if the device is disconnected and reconnected, or plugged into different USB, settings are reset. Is it possible to configure the settings of the USB device on all USB ports?

    Hello

    See this link:

    http://forums.Logitech.com/T5/USB-speakers-read-only-archive/how-to-setup-a-USB-audio-device-in-Windows-XP/TD-p/292846

    http://www.NuForce.com/HP/support/USB-audio-setup.php

    http://www.von-phone.com/audio-settings-USB-phone.php

    LTE, we know the results.

  • Device not recognized USB message with iPhone 3g

    Here's the story from the beginning, I hope that I have provide sufficient detail.

    I got my iPhone 3 G is replaced. Therefore, a new phone... I went on iTunes in the middle of the restoration... It gave an error message and put my phone in recovery mode. Since my computer gives me the message "USB DEVICE NOT RECOGNIZED" and appears as an "unknown device" in Bus USB controller in Device Manager.

    I went to apple and they finished the restoration... I plugged the phone on other computers... It is therefore not the phone.

    Still nothing pops up... It keeps giving me "USB DEVICE NOT RECOGNIZED" I have uninstalled iTunes the right way... as Apple people walking through and reinstalled... the Apple Mobile Device is started.

    I still get nothing... everything is... newly installed... Windows doesn't recognize just... that it doesn't show up as a camera... and it does not even charge my phone.

    I tried different ports... and I get the same message... my camera and my sisters iPod shuffle connect correctly.

    I really need help! I don't know what else to do... I need to work on this computer. It's a Toshiba Satellite Windows Xp SP3

    I just went through two weeks of tampering with my 'old' computer trying to recognize my new 4370dn Canon multifunction printer after installing Windows 7.  I tried to reinstall Windows XP, uninstall the USB ports and hubs in Device Manager, update the printer drivers and several combinations of these elements.  In my case the ports would recognize external hard drives and flash drives, but my printer would come as a device not recognized.  Finally, what worked for me was to uninstall all the ports/USB hubs listed in Device Manager (they get automatically reinstalled with a soft reboot of the computer) again, download a driver from the Intel website (http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/16023/a08/infinst_autol.exe&agr=&ProductID=&DwnldId=16023&strOSs=&OSFullName=&lang=eng) chipset installation utility and restart the computer.  When I plugged the USB cable from the printer, the normal process of new device was launched.
  • When I try to copy a single file (for example: size of 1 GB) drive hard to any what external memory device via the USB port, the copy process takes several hours to complete

    I use a DELL Studio 15 laptop computer. When I try to copy a single file (for example: size of 1 GB) hard drive to any external memory device (for example: USB key or external hard drive) via the port USB, the copy process takes several hours to complete. I have checked the viruses using McAfee Antivirus, but could not find. Can someone suggest me a solution?

    Hello

    ·          Were there any changes made to your computer before this problem?

    Step 1: Format the external device to the NTFS format and check if the problem persists.

    See: http://windows.microsoft.com/en-US/windows-vista/Convert-a-hard-disk-or-partition-to-NTFS-format

  • Device not recognized USB error message - all USB ports.

    Apologies if all this seems a bit simple, but I'm not an expert, so bear with me.

    I have a laptop Fujitsu Siemens Amilo Li 1718.

    My USB ports have stopped working in 2-3 weeks.  I get the message "USB device not recognized.  One of the devices attached to this computer has malfunctioned and Windows does not recognize... »

    I don't seem to get any yellow exclamation point in device, all my drivers in Device Manager and software are up to date and Windows Update is running.

    My mobile phone and ipod always charge when I plug them in and out of this problem, everything works fine.

    In addition to the usual updates of Windows, only two other things have occurred since last, they worked.  One was that I renewed my subscription to Norton Antivirus, the other was that my laptop battery ran right out while he was in mode 'sleep' as I did not know that I had not plugged to the socket properly.

    So far, I went through some process as suggested by various items and/or help & support on Microsoft.com.  They include:

    * (From multiple locations) system restore has failed.
    * Diagnostic software Ran Fujitsu Siemens, which says that my computer is fine.
    * Run the virus scan who come clean.
    * Tries to connect via a USB hub.
    * Deletied the USB controllers in Device Manager to re - install.
    * Changing the settings of ForceHcResetOnResume 3-to-1
    * Change AdditionalCriticalWorkerThreads from 0 to 2

    (The last two I've changed back again after neither worked).

    My opinion of beginner, it's that looks like it will create new registry details for each device when valid seem to exist already is not thankful.  Although given my lack of technical knowledge, this could well be stating the obvious.

    So, now, I drew a blank.  Anyone got any ideas?  Got 9 months left a 3-year warranty, I don't want to go through the hassle if it can be avoided without too much trouble.

    Thanks in advance!

    Tim

    Hello

    Maybe these will help.

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or does not work - a Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Have you tried to use an external hub powered by USB power is very limited in a computer and if overloaded
    strange problems will come up.

    ------------------------------------------

    Even if you did some of this departure please up and work until low and if necessary check
    with the utility.

    Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

    Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
    It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

    now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

    APPLY/OK

    RESET

    This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

    Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
    USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
    Try to remove all instances and restart then plug the drive.
    http://www.NirSoft.NET/utils/usb_devices_view.html

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

    Original title: problem ejecting USB Mass Storage Device

    When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

    Hi a. Cook,

    (1) how long have you been faced with this problem?

    (2) is limited to any specific USB device?

    This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

    Method 1:

    (a) Download Process Explorer from the link below

    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

    (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

    (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

    (d) find the process and its PID (process identifier) in the following box.

    (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

    (f) press Ctrl + H to display the handles in the view in the lower pane.

    (g) find the file according to the drive letter and right click, choose Manage close.

    Reference:


    Problem ejecting USB mass storage device
    http://support.Microsoft.com/kb/555665

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Method 2: You can see the steps in the link below by Diana d.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

    Method 3: A scanner online for any threat and try to correct

    http://OneCare.live.com/site/en-us/Center/cleanup.htm

Maybe you are looking for

  • I don't get a password reset confirmation email.

    After triple verification of the entered e-mail address I so that the duration and Trash files I do not receive the password reset email link... I am on Windows 7, Version of Pale Moon: 25.2.1 (x 64). Tried to get that resolved on Firefox 36.0.1 - bu

  • My tabs are invisible.

    http://prntscr.com/50f05a My tabs Gets the same color as the background, and I don't really see a sh * t. In any case, it can be rotated the same color as the rest of firefox?

  • How can I enable Satellite Pro L770 in a Wi - Fi hootspot?

    Hello Please can someone tell me how to turn my laptop into a wifi hotspot using the mobile wifi dongle I have? I can get online with the laptop perfectly but I would use it as a point of interest for other devices (mobile phones) - is it possible? T

  • Satellite A100-225: battery power light flash orange

    Last night, plugged my AGES of NINE DAYS by Satellite A100-225, the lights were on, it was working fine. This morning, woke up, lights were turned off, tried to turn it on, the battery power button flashed light Orange. Tried to play with the cable b

  • Why print not working and everything freeze-preview

    When one wants to print the installation of print preview translates into a stall and just freezes or sometimes causes IE crash. How can I fix it?