Compact virtual hard disk and change the type of drive in static

Similar Questions

• Is there a way to increase the size of the virtual hard disk? in the VM? ESXI 4.1

  HelloW to all.

  I created VM with the size of the hard drive of 80 GB and now I want to increase the size of the 80 GB to 150 GB drive does not add whit extra 70 GB partition but to increase the patitionn of 80 GB.

  Is there a way to increase the size of 150 GB of the virtual hard disk? in the VM? ESXI 4.1

  Thanks in advance.

  If the guest operating system is windows, then follow below process-

  Scenario-1 his drive is not the boot partition.

  1. click on the settings of the virtual machine

  2. Select the hard drive to increase and give the size you want (don't forget that you should have a free space available on the data store).

  3. go to disk to the virtual machine management, and then rescan disk (you will see the unused space)

  4. open the cmd/command prompt, then run diskpart by using the diskpart command

  5 then... the drive... After this list give the command "select disk 1" (1 is the disk you want to expand)

  6. After selecting the disk, type extend (extend order will extend the drive)

  7. exit diskpart.

  Scenario-2 If the drive is the boot partition.

  1. power of the virtual machine. (go on change settings of ==> click on the drive you want to extend ==> copy the path of the disc)

  2. go to any other test VM and add disk--> disk existing use ==> give the drive path that you want to extend ==> Assistant to finish.

  3. Select the hard drive to increase and give the size you want (don't forget that you should have a free space available on the data store).

  4. select disk of the virtual machine management, and then rescan disk (you will see the unused space)

  5. open / cmd command prompt, then run diskpart by using the diskpart command

  6. then... the drive... After this list give the command "select disk 1" (1 is the disk you want to expand)

  7. After selecting the disk, type extend (extend order will extend the drive)

  8 exit diskpart.

  9. go to change the setting of this test VM and select the hard drive... ==> click on remove virtual machine. (do not drive delete)

• How to reformat hard disk and write the hard drive C, of zeros

  I gatewayway 500 x with windows xp home ditiond... This is a manufactured office 05/28/02. I have all the restore disks. How to write c or a hard drive, of zeros to make clean reinstall? It must be real simple, but people at the door give me a hard time. All the computer Gateway manufactured after OCT 2008 have a numnber SIND. Mine does not work. I did once in the year 2003, I phone to life as long as I am the original owner. I also have a Gateway VISTA laptop. I met two compuers myself. I use the desktop computer and error, learning and music. I studied logic computing to CSUN Northridge, CA in 1999, I was a student. I love this kind of thing, but I can't afford to pay losts of money at the time.  I'm disabled because I had two failed back operations less than 18 years. Now Iam 65, sea musician tought and I want to become a tech free tought. Help, please. I never learned to type properly... I have a lot of free time amd, I'm ready to help others. CC to BILL GATES.

  SHALOM BARRY

  Just use one of the managers of two partitions described below to remove the existing Windows XP partition (or will write zeros, but this is not necessary just to reinstall XP)

  -Partition management-

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• My disk cleanup not in system tools, hard disk and even the 32 system folder properties. Need help

  I have problems with my drive cleanup.exe, I try to cleapup my hard drive with disk cleanup but there is no diskcleapup in my hard drive directory, real estate system tools and also my system 32 folder...

  I just format and install the new windows xp sp3 operating system, but the disc cleapup sad does not... IDK what's going on...
  Any solution for this?

  Hi HafizAkira,

  You can try the open disk of cleaning of

  1. start-> all programs-> Accessories-> system-> disk cleanup tool.

  2. my computer-> right click on your Local C drive-> properties-> tools-> disk cleanup.

  3. click on start-> run, type &-> cleanmgr.exe-> Ok.

  I hope this helps.

• Read the last sector of the virtual hard disk

  Hello

  I'm running Windows 7 Home Premium VM inside VMWare Workstation image. I want to access the last sector of this Virtual Hard Drive. However, I do not within Windows 7 itself.

  Instead, I want to start this virtual system using a bootable Livecd. To this end, I can create an ISO using the Windows XP Installation CD and Bart PE Builder.

  Now my question is, how do I boot under VmWare Workstation Livecd Bootable using Bart PE created so that I can access the virtual hard disk.

  And also, once I started the new system, I want to read this last sector of the virtual hard disk. This is for testing purposes. I know, it could be done on a running system as well however, I want to be able to do this in VmWare Workstation.

  I searched the net for a solution. I came across the Disk Explorer utility, which is available here:

  www.Runtime.org/DiskExplorer.htm

  In my view, this will allow me to read the last sector and thus copy. It is however an expensive software. They have even a plugin developed to work with BartPE, which is available online here:

  http://www.Runtime.org/diskexplorer_for_ntfs.cab

  But we need to provide the license key in the .inf for this file to work.

  In any case, I know how to prepare the Windows Bootable Live CD using BartPE.

  Issues related to the:

  How to get started in using a windows live CD VMWare?

  How to access the virtual hard disk of the Windows 7 operating system?

  And finally, are there other alternatives that are easier to explore this disk that would allow me to read the last sector of this virtual hard disk and copy another medium?

  Thank you.

  I am able to use the keyboard in knoppix, but the mouse doesn't seem to work properly. I am able to click right on the desktop but not able to select any option. The behavior of the mice is completely wrong.

  Is it possible to fix it?

  You can try to temporarily adjust the Type of guest OS Linux or edit the .vmx to have these parameters/values or temporarily remove the USB controller.

  usb:0.deviceType = "mouse"
  usb:0.present = "FALSE"
  mouse.vusb.enable = "FALSE"
  

• To change the type of search to a string field in the DataObject Layout

  Hi all

  I am trying to change a simple string search field type, but at the same time, I don't want to lose the contents of the field. Is it possible to BAM?

  Thank you

  Jayanthi

  Hi Anne,.

  When we have data in place, that we cannot change data - type.you can do you something like make a backup of the data using Icommand object.

  and change the type of xml data exported in importing data Object.and the same.

  It's like ricks, if the purpose of these data are interrelated with other data object or if you created reports on the same.

  try something like that when you finished taking backup of all things

  Concerning

  Shankar

• Cannot change the type of data in the columns referenced by foreign keys

  Hello:
  
  I'm using Version 3.1.0.691 and change the types of data in many columns of data derived from the field types. If a column is referenced by a foreign key, however, the data type radio buttons are grayed out. I suppose that if I deleted the foreign key, that I would be able to change the data type of the column to a field, but that would be tedious. Is there another way to go about this?
  
  Any help would be greatly appreciated.
  
  Thank you
  
  Doc

  Hi Doc,

  If a column is referenced by a foreign key, however, the data type radio buttons are grayed out.

  It is not good - if you have the PK column, and it is called by another FK column you can change the data type of column PK and FK column data type will follow the change. You cannot manually change the data type of column FK. Good column PK itself could relate to another column, and in this case you cannot change the data type of column PK.
  In your case - you need to find the first PK/Uk column that is not the column FK itself and change its data type. FK columns in the chain will follow.

  Philippe

• Machine virtual hard disk (virtual disk) of the upper size limit put into service

  Hi there, so I'm trying to create a hard drive or a virtual disk in a Virtual Machine in order to configure the virtual machine as a file server. The data store is a Promise VTrak M610P and I installed the vtrak as a type of VMFS5 5,46 TB of space (4 2 hard disks to each RAID 5). In the virtual machine, I added a hard drive and selected the store data vtrak and tried to set the provisioned to 5.46 TB size and type thick lazy disposition to zero, but I get an error of DiskCapControl with the range values. I changed the size set in service and 4 TB and he accepted the new hard drive. I can't find anything on the actual limit on the creation of hard disk in a virtual computer.

  
  

  I'm running a server Supermicro X7DAL-E with VMware ESXi 5.5 U2.

  Any ideas would be useful. Thank you.
  

  I forgot I asked a similar question on a different section of the forum (shame on me), but I found a solution. Please see the following post Re: SMB access using esxi host and manage with MS server 2008 storage

  Here's what I wrote on the link above:

  So it turns out that there seems to be something wrong with vClient when you add a hard disk (virtual disk) to a virtual machine of size greater than 4 TB. Article VMware KB: value of range error message when you add more than 4 TB capacity discs in vSphere Client describes this if you encounter this problem, add the hard drive via vSphere CLI, CLI power or vmkfstools. So this seems to be a known issue on vClient. What I ended up doing was using vClient, creation of hard disk, adding to the virtual machine (size of the hard drive is to 5.45) and when I would get the error message on the DiskCapControl out of reach, I would just click OK and then finalize the creation of the hard drive on the virtual machine. Once the process is complete, I selected the virtual machine and noticed that he indeed added a new HDD size 5.45 TB even if he's complained about it. I pulled to the top of the virtual machine with windows server 2008 R2 installed and was able to create a new disk under windows and set it up as a shared drive on the network. Looks like vClient must be updated by VMware and correct this bug, if it's a bug that I think. Thank you for the help vervoort!

• The virtual hard disk size

  For worker Analyzer IO VM, it is recommended to create a larger second virtual hard disk that serves as a target IOmeter.

  
  

  Is the size of the virtual hard drive exactly the same workload working set size, which means that all data in the virtual disk is read from or written to storage during the race?

  Do you have other recommendations to decide what size the second virtual hard disk should be a VM worker?

  Thank you

  Rebecca

  Hi RS_1, it's useful, but I was looking for some additional tips for the user guide.

  I received responses from some of the developers of IO parser and also ran a few tests of my own.

  Iometer generates its I/O based on the number of blocks of target disc (i.e. the manually added virtual hard disk on the worker VM).  The size of the disk hard virtual will be be equivalent to e/s working set size.

  For a virtual hard drive that strikes only cache, a rule would be its size to 100 MB.

  For a virtual hard drive that hits the disk, the virtual hard disk could be sized anywhere from 10 GB to the top. The drive, / o most actually hits disc rather than cache.

  To do this, I created a 200 GB thin provisioned virtual hard disk for my e/s VM Analyzer worker. As I ran the Iometer workload, I could see the thin disc quickly increase from almost nothing to its size fully provisioned. This means that the new virtual hard disk sectors were continually being read and written by Iometer. Interestingly, it only took about 5 minutes to flesh out a whole 200 GB drive. Obviously, this speed would depend on the type of I/O profile used.

  I also tested a 20 GB disk Iometer vs virtual a virtual drive of 200 GB. Average latency, IOPS / s and flow were all better for 20 GB disk - because a greater proportion of e/s in this case was hit the cache, tilt the numbers positively.

  So, even at the drive hard virtual, sizes last 10 GB, size of the VHD will affect yet observed performance to Iometer.

• Increase the size of virtual hard disk to a virtual computer with snapshots

  Is it possible to increase the size of a virtual hard disk on a virtual machine that has snapshots on this subject?  I can use VMware converter to increase the size of the disk, but who commits snapshots during the conversion-

  Thank you

  As everybody said that it is not a good idea to increase the space for a VM with a snapshot.   The snapshot files are all related originally vmdk and when you change this vmdk he breaks the link.

  A particular reason that you cannot commit the snapshot before adding the space.

• I can't and never been able to open a file that was previously saved on hard disk by selecting the print option to get in the print dialog box

  I can not and never been able to open a file that was previously saved on hard disk by selecting the print option to get in the print dialog box. Firefox displays gooblygook, even if the name of file is an html element, the Notepad of Windows crashes, MS Excel does not recognize the file type. MS Word also displays goobblys when the file has no file extension.

  If you use the file printing, then you will get a file that is supposed to be sent to a printer, and this file has any sort of code formatting for this printer.

  Open such a file in Firefox or a text editor can only work if you use one printer for text to print the file to, then make sure that such a printer is installed and selected.

• Qosmio F10 - cannot change the type of HARD drive in the BIOS

  I want to change my hard drive, but the category in the BIOS is not editable.

  I can not change the type of hard drive in the BIOS on my desktop PC.

  Hello

  And you want to change in the BIOS now?
  I put t know which option you mean exactly

  The drive in the BIOS, you can change t. That's why you should buy a new

• When you access the virtual machine, getting the error "encountered an error when you try to use one of its virtual hard disks". Help?

  I received the "low disk space error" on a hard drive of the virtual machine dynamic expanding. I have increased my space of virtual hard disk using "My Computer" > manage > storage > "Disk management" and choose "Attach VHD" then resizing to max available (64 GB), and now I can not start the virtual machine. It gives the error: encountered an error when you try to use one of its virtual hard disks. Help?

  Hi NatalieFoster,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 Virtual PC and XP Mode TechNet Forums

• Is it possible to transfer everything to a virtual hard disk that is smaller on a virtual hard disk that is larger in VMWare Workstation, using the same virtual machine?

  Hello

  I was wondering if it is possible to transfer everything to a virtual hard disk that is smaller on a virtual hard disk that is larger in VMWare Workstation, using the same virtual machine? In the affirmative, please could someone advise me on how to do it. Also utility management and disk transfer can be used in virtual machines to do this?

  Thank you very much

  Tim Auluck

  I'm not sure what exactly you are asking. Can you please clarify!

  Basically you can resize a virtual drive or add a second virtual disk to a virtual machine and transfer/copy files. You can also resize the virtual disk using VMware Converter for example.

  André

• How to specify the file of virtual hard disk when you create a new virtual machine using virtual hard disk on the data store?

  I'm new to PowerCLI and find quite simple, but in the documentation I read, I don't see how to use a virtual hard drive, existing on a data store when you create a new virtual machine.

  Is this simple registration on the virtual hard disk, or did I miss something?

  My current create VM is the following statement:

  New-VM

  -Name $TargetHostName -host $TargetVMCenterHost -data store $TargetVMCenterDatastore DiskMB - 20000 -MemoryMB $TargetHostMemoryMB -NumCPU $TargetHostCPUs -ID $TargetHostOS -CD -Description $TargetHostName

  Didn't notice this before, but I think that vSphere will use a backslash instead of a slash in the paths.