Compact Z5 camera away from the lock screen and the camera button does not work as well

Similar Questions

• The scan button does not work on Windows XP Media Center edition 2005

  Name of the printer: hp psc 1350 all-in-one

  Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.

  I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.

  Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)

  OK, that explains why the scan button does not work.

  The complete software is required for the scan button to work, it is not a feature of the base software.

  Be sure to follow the steps below in order to get is torted:

  1. Unplug the USB from the printer.
  2. On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
  3. If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
  4. Download and install the full feature below:
     http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
  5. You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
     http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe

  Kind regards

  Shlomi

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.

• Firefox automatically updated itself, would not add new bookmarks, then deleted all mine, will not always add new, now the back button does not work. I'm Livid.

  I think I'm on Firefox 13.0. He put itself as part of the update of my computer up to date (at least I guess that's what happened, because it has changed). I noticed yesterday that he would not favorite Web sites, but I thought it was just the website or bookmarks have been full-time or something. Today, I tried to remove a few bookmarks to make more, but they would not remove. I tried to register a new site, and it wouldn't work. I tried to close/exit firefox and re-opening of the program. While the program was closed, I installed the next set of updates on my computer. When I have opened firefox, all my favorites, and the tab menu (or what you call personal small bar on the actual tabs) were gone. I can't always favorite of new sites, so I can't even re-do all my favorites (and I got a lot, all of them arranged so it's a big loss and incredibly annoying). Then I realized that the back button does not work. And the cursor remains on the typing that I symbol, it does not change the arrow, when I click on a link.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• the light on the power button does not work. How can I activate it?

  HP pavilion dv7

  Windows 7.

  the light on the power button does not work. How can I activate it?

  If the key light is not lighting up, then more than likely that the LED is just out for your power button. If the laptop is still under warranty, you can it be repaired or replaced, but as long as its not causing you any serious issues, I worry too much with it.
  
  BRAVO is just a system we use to say thank you to informative messages.

• My optical drive is not displayed in "Device Manager" the eject button does not work

  Latitude Dell with Windows 7

  My optical drive does not show in the "Device Manager", the eject button does not work - I can only eject through the pin hole.

  This means that the drivers are missing or that the disc is broken?

  I tried to restart.

  Thanks in advance

  Dave Roberts

  Original title: Reader in mind windows 7

  Its possible the drive has failed. Is this an internal or an external drive? In both cases, make sure that all cables are properly connected and functional, including the power cables. If its a USB external drive then try another USB port.

  But, assuming that you tried to update the drivers (get the latest compatible drivers on the manufacturers for your brand/model/OS(32/64 bit) PC support site and install to see if that helps - first set a system restore point)) and then see if this MS article helps - https://support.microsoft.com/en-us/mats/cd_dvd_drive_problems?wa=wsignin1.0

• Download in the market button does not work!

  Download in the market button does not work! No download by clicking the download button. Enough storage + reboots.

  I just restarted my computer and now I can download.

  Thank you!

• My computer is stuck on the Welcome screen and the power button does not work. How can I activate it finish (and on)?

  My computer is a Windows XP laptop. It actually worked fine this morning, but now my power button does not work and the computer does not start correctly.

  Hello

  Its best to contact the manufacturer of the computer as it might be a hardware problem.

• The jump button does not work on iPhone

  Skip to the next song button does not work on iPhone. When you press the jump key, instead of going to the next track or shuffle to the next song, he repeats / restarts the track that is currently playing. Even when the song ends, it starts all over. It's like all my songs are stuck on repeat. The only way to change a song is by manually choosing a different, or by manually typing the shuffle button. Everything worked great yesterday. I asked several of my friends to check my conclusions, and they have confirmed the same questions. If anyone knows how to fix this help please.

  Hello Gus87,

  I understand that your iPhone seems to be stuck playing the same song, regardless of your attempts to move to the next track. This may be due to the function "Repeat" enabled in the current reading on your iPhone screen.

  

  • Control playback. Tap a song to play and show the Miniplayer. Tap the Miniplayer to display the now playing screen, where you can do the following:

  Repeat steps. Press on to repeat an album or a playlist. Double click to repeat one piece.

  iPhone user Guide - play music

  http://help.Apple.com/iPhone/9/

  See you soon!

• Satellite A100-499 - function for the WiFi button does not work

  Hello, I have a Toshiba Satellite A100 - 499 PSAA9E.

  I formatted my laptop and installed XP with SP3. I downloaded and installed the drivers (in the right order) for this OS of the toshiba - Europe.com and everything is going well except Fn + F8. It is assumed that this combination has toggle Wifi & Bluetooth. When I switch side 'off' position and I press the keys, appears a message saying that I should switch to position 'on' but when I switch lateral position 'on' and I press Fn + F8 it does nothing.

  If I want to disable the wi - fi I have to do it with other methods: the function key does not work correctly.

  Any clue?
  Thanks for the advice (and sorry for my English).

  When the WLAN switch is on orange LED is also on?
  You can scan area available networks?
  Have you tried to use the WLAN without using FN + F8?

• lock the mouse button does not work

  It worked fine until a few weeks ago.  Now, I need to left-click while using the touch of the finger. I'm going to: mouse properties, buttons, lock, turn on click-lock and ok.  It does not help.  Thank you.

  Hello

  1 did you change on your computer?

  2. What is the brand and model of the computer?

  3. I suggest you perform the clean boot and check.

  Method 1:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to update mouse drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings

• My computer from the Start button does not respond

  Original title: my computer from the Start button is (no response), it shows nothing... no ductwork is.

  I am running Vista and when I go into my computer from the Start button it says (not responding) and does not show its readers just a big blank page. I do not have a shortcut on the desktop. He's NEVER done this before. I had internet Explorer (not answer) before but never my 'computer '! What would cause this?

  Hello

  1. Since when you are facing this problem?
  2. don't you make changes before the show?
  3 is the other shortcuts in button start doesn't work very well?
  4. have you run a virus scan?

  5. what happens when you type explorer.exe in the start search box and press enter?
  6. are you able to open that way?

  Method 1:
  You can perform a System File Checker on your computer and check if it works.

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.  You can check the link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:
  Try to solve this problem with boot.
  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  
  Method 3:

  I suggest you check for errors related to Event Viewer. You can check the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• BlackBerry smartphones HELP! I lost all my application icons and the menu button does not work!

  I don't know what I did.  All the application icons are moved from the home page.   The menu button does nothing. The trackball does not have anthing. The only thing on the screen is the time, date, battery, new mail envelope, signal and volume. I pulled the battery and it has no effect. I don't know what to do. Help!

  Hey, JSammy.  I had mine works again with the help of someone from another site.  Here's what you need to do: press the green call button, then the menu button.  Select options, then on options General, highlight "dial from homescreen" and the value. Save and exit. Now on your home screen, press "O".  After that, the General menu options will come.  Choose the option 'theme' and choose a different theme or return to the default value.  This should be all your application icons to reappear.  After doing all this make sure you go back to reset the "dial" since the homescreen on 'yes '.  I hope it works for you.

• Hidden behind the symbol button does not work

  Hello

  I have a button named "Log" that can't be clicked because I have a symbol in front of it.

  The symbol is set to 'off', but still appears to be hiding the button.

  The symbol is an animated menu I want to introduce (on the click of the menu button) and cover the sign in button, but I need the sign in button to be clickable when the menu is not open, i.e. I can not put the sign in button in the front of my menu symbol.

  What should I do to stop the symbol menu "masking" functionality of the sign in button?

  Thank you

  OI, you're right that everything does not work, try this good

  the value always on burgermenu

  burger_btn code should now be:

  If (sym.getSymbol("burgermenu").getPosition ("menuout")) {}

  setTimeout (function () {sym.$("burgermenu").css ({"z-index":-10});}, 1200);})

  sym.getSymbol("burgermenu").playReverse ("menuout") ;}

  else {}

  SYM.$("burgermenu"). CSS({"z-index":+10});)

  SYM.$("TOP_BAR_grey"). CSS({"z-index":+10});)

  SYM.$("burger_btn"). CSS({"z-index":+10});)

  sym.getSymbol("burgermenu").play ();

  };

  and on creationComplete (stage), add this line:

  SYM.$("burgermenu"). CSS({"z-index":-10});)

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/