Compadability issues with fallout 3 and windows 7

I already tried to go under XP, XP SP2 & 3, Vista, Vista SP1 & 2

I run it on a laptop with intel core i5 4 x 3GB of ram and geforce gt 520 m, 330 m 1 GB vram
It worked fine on my old computer laptop amd turion 2 x 4 GB ram ati 3200 m 256 MB vram
It will work fine on full setting up until I get to where I select my _ while it freezes
I also tried on minimum settings (set to low temperature preferably windowed 800 x 450) and it always fails at the same place
My drivers are as up-to-date as possible (nvidia didn't even pilots from the 300 series to the top yet) and I had the cpu running task manager was used only 23% and total of 1.4 GB of ram and video card gets warm barely im wondering if it could be a problem of compadability with the new 300 series?
Advertisement

I solved the problem I am running a core i5 520 m and geforce gt 330 m on a toshiba satellite p500-st6844 and it came out of the box with hyper threading enabled (the problem) fallout 3 would not run after a lapse of time or a change of scene sertai, I checked the permissions I even ran it under admin account I've updated to the latest version with a supposed windows 7 total compadability fix made sure I had the last ditectx taken care of by my gfx card, I also made, I got the latest nvidia drivers (nvidia still has not all drivers update for the Witch of the 300 series only makes no sense, because they have the same hardware/software as the 200 series) I finally decided to turn off hyperthreading to see if that had nothing to do with it and I seriously doubt that but to my surprise she has a great even better than my office upstairs with a 8800 gtx, so if you have a gambling problem where the game starts well but crashes after a short period of time or during a change of scene and you have active hyperthreading, that might be your problem

Tags: Windows

Similar Questions

  • Compatibility issue with DVD Maker and Windows Media Player

    I was helping a friend with his DVD Maker and after successfully completing a DVD (music and images) using Windows Media Player music on our second attempt, he indicated that there was a compatibility problem with the music that he snatched from Media Player. He said that it would not accept the ".wma" format.  How do fix us the problem?

    I was helping a friend with his DVD Maker and after successfully completing a DVD (music and images) using Windows Media Player music on our second attempt, he indicated that there was a compatibility problem with the music that he snatched from Media Player. He said that it would not accept the ".wma" format.  How do fix us the problem?

    I'm no expert in this area, but I think that you used the wrong application, namely Windows Media Player.
    A month ago, I did 2 DVD with images and music. Here's what I did...
    Open Windows Movie Maker...
    1. I imported images in the timeline.
    2. I imported the music (wma in your case) file to Audio column / music.
    3. I have synced it so that the images and the music would start and end at the same time.
    Note : If you already have the video file with import loan, then simple music video to the timeline and go to step #4.
    4. I clicked on publish on DVD.
    Windows DVD Maker wil pop up. You know the rest of the steps.

    t-4-2

  • Are there still known issues with Lightoom 5 and El Capitan with respect to attachment? I know that problems have been resolved with CC Lightoom

    Are there still known issues with Lightoom 5 and El capitan with respect to attachment? I know that problems have been resolved with Lightoom CC.  I looked on the Internet but most of the references are Lightoom CC.  Ive got all the updates with Lightoom 5, (Camera RAW 8.1), but also Apple, (El Capitan 10.11.3), but my Nikon D800 will not always tie.

    HAL P Anderson wrote:

    The problem is in the SDK (SDK) of Nikon. He used features of OS that changed with El Cap. All previous versions of LR were broken by the Exchange operating system. For LR 5 to work, it must be associated with the new SDK of Nikon, and Adobe is not reissue of older versions.

    The result is: LR5 and previous versions will continue to not be able to attach Nikon under El Capitan. I'm sorry.

    HAL

    Although what you say is maybe true, I'm not sure, but there were reports of people that says exactly the opposite. Home of Nikon has not worked in 2015/6 but continued to work in LR 5 on the same Mac running 10.11.x.

  • I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

    I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

    Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

  • Very slow network with 10 Workstation and Windows 8 / 8.1 Windows

    Hello

    I come to you because I have a problem with the network with 10 Workstation and Windows 8 / 8.1

    In fact, if I copy files from or to a virtual machine with my host of Windows 8 by sharing Windows (SMB / CIFS), it is very very slow and unusable.

    Example: My host is a Windows 8 x 64 and Windows 8 x 64 host: transfer speed is about 100 or 200 KB/s and often 0 KB/s (transfer seems to be paused).

    With a guest Windows 8.1, same problem.

    After many tests, I also tried with Windows PE 5 (same kernel as Windows 8.1): same problem, unusable.

    But, miracle, if I use "Utility MSI - X OFF" Intel, I reboot and the problem disappears.

    There:https://downloadcenter.intel.com/Detail_Desc.aspx?lang=eng & DwnldID = 18946

    Someone in this community, said that it have the same problem and a workaround solution was not to use Intel e1000e but e1000 then: I must admit, it works.

    With e1000, speed is around 30 to 60 MB/s and stable.

    But, by default, 10 Workstation e1000e value when I create a new VM Windows 8.1, so it's a problem... Do not manually change for each new virtual machine and explain this to my students.

    Please, you can reproduce this bug and fix it?

    Thank you very much.

    New workstation 10.0.2 fixed this bug. Perfect.

  • My PC will not repair or install an operating system. I tried with Vista, 7 and Windows Server 2008 installation media, but it does not get as much as the first menu.

    As it is said above. Everything worked fine until a few days ago. Now, it will fail to start correctly wih STOP 0 x 00000024 (ntfs corruption), but I can't boot from any installation media to reinstall the OS or repair Vista. All I get is the wallpaper but no menu. I tried to unplug the SATA HDD and inserting an IDE drive with no effect.

    I can't start to BACK among the several start-up/repair CD I tried but I am unable to boot from a DVD of Windows XP PE (BartPE or Hiren boot CD), but I can boot Knoppix Linux (5.3.1 and 6.4.3).

    All I want to do is run chkdsk /r and then either to repair or install a new OS to make it work again.

    Any thoughts?

    Dave

    Hi Dave,.

    You can read the following article which talks about the same issue:

    Error message in Windows 2000: "Stop 0 x 24 ' or «NTFS_FILE_SYSTEM»

    Note: The steps mentioned in the article apply to Windows Vista n 7, so operating systems.

    1. do you have the original supplied with the computer disks?

    2 have you tried to use the original Vista disks?

  • A bit of an issue with Microsoft & AVG and Isearch & Myclean PC

    A bit of a problem with Microsoft & AVG and Isearch & Myclean pc, after installation of AVG, I find that they elect themselves install Isearch & possibly other programs without permission and are now charging money to remove the said nuisance with MY own PC.  It's MY computer, not theirs.  I don't think that Microsoft should be in the browser hijacking business or cooperate with those who are.

    Hi Carl,

    AVG and Isearch is not a Microsoft product, this problem occurs if you install AVG, you may need to select another installation option bar tools and modules.

    See the following for more information Microsoft article.

    http://forums.Avg.com/in-en/AVG-forums?sec=thread&Act=show&ID=185183

    More information or update, I recommend you contact the AVG support.

    http://forums.Avg.com/in-en/AVG-forums

    I suggest you to check if there is no toolbar or associated with Isearch & Myclean modules are installed on your computer.

    Manage Add-ons in Internet Explorer: http://windows.microsoft.com/en-in/internet-explorer/manage-add-ons#ie=ie-9

    I suggest a full system virus scan and check if it helps.

    Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

    Keep us updated on the status of the issue.

  • network variable will not work with VBAI 2010 and windows 7

    Hello

    In fact, I have a problem with 2 EVS-1464 (windows 7) and VBAI 2010.

    I have to use network variables to allow the communication between two electric vehicles, but I can't use it. My network is ok (I can ping between the two facilities) but I can't (t access the network variable.

    I did a test with VBAI2011 EVS / VBAI2010 PC windows XP--> it works. (but I don't want to use VBAI 2011).

    You have solutions to solve my problem?

    Thank you

    Ulysses

    Hello

    Here are several documents that might be useful for you:

    Using the LabVIEW shared Variable

    Troubleshooting network-published static Variables

    How can I use shared Variables to transfer data from Vision Builder for Automated Inspection (VBAI)...

    You can also try something. To do this, you must go to the EXE VBAI here:

    For 32-bit machines:
    C:\Program NIUninstaller Instruments\Vision 20XX\ VBAI

    For 64-bit machines:
    C:\Program Files (x 86) \National Instruments\Vision VBAI 20XX\

    Right-click on "Vision Builder.exe", and then select Properties.  Make sure "run this program as an administrator" is checked.

    Click OK, and then try to rerun VBAI. You may need to redeploy the variables in the variable Manager until they work properly.

    Kind regards

  • Port Forwarding issue with HP Photosmart C7250 / Windows 7 / Linksys router

    Help, please! I worked on this problem with HP, Microsoft, No - IP.com, etc with no resolution.

    I have a 650 workstation DELL computer in office which has been recently formatted and had a clean install of Windows 7 will be of all installed updates. He is running Free AVG 9.0. There is a Linksys WRT54GS Wireless with disabled DMZ and Port 80 (only) active.

    I have installed no.-solution of IP.com for the creation of a hostname to point to my dynamic IP address.

    I need to have Port 80 go to the IP address of my PC so that I can set up synchronization option Wireless of my CRM with my iPhone and Blackberry. Instead, whenever I created the public IP address or host name, it brings me to the Web Interface of my HP Photosmart C7250 printer. Even, I assigned a static internal IP (and DNS) address to the printer (192.168.1.101) but no matter what I do Port 80 goes into that compared to the IP from my PC to 192.168.1.110 which is the IP in my router.  The printer is set up wireless on Channel 6 (WEP encryption).  UPnP is disabled.

    I called HP and they said, there is no place that port forwarding is enabled. This doesn't seem to be the case. I tried to change the internal IP address of the PC to 192.168.1.101, but it had nothing works (could not ping or pull up the Web Interface for HP). I tried to add a different port number and it doesn't work.

    I need Port 80 to connect to my IIS server. Microsoft says that this is but another State Tech that disrupts the HP software. From the HP Web Interface, it is what appears when I type in my host name or public IP address and it's not going to my PC, then I have a tendency to agree.

    FYI... I unplugged the printer and now when I try to ping the public IP address, I always get a response (even after half an hour of the printer being disconnected). Please HELP ASAP! Thank you!!!

    Solution - on secondment in case anyone else ever runs into this.  Update the firmware on the Linksys router did the trick!

    From and upward... FINALLY!

  • problems with 5.01 and Windows 8

    Hello

    I've been having some problems with the 5.0.1 and Windows 8 and wanted to see if anyone knew these.

    1 aero glass does not work correctly. I originally had problems with Office 2013 and which was fixed by disabling hardware acceleration for office only

    2. problems with USB currencies when 3 USB is enabled. The custom of the machine is taken out of service and the machine locks up frequently. As a solution, I changed the virtual computer to use only USB 2.0

    Thank you!

    Aero has not been removed in the RTM and retail of Windows 8?  I thought it was.

  • Anyone know why I have some formatting issues with my Tablet and phone of the sites? I only have the layout of office. There are banners and footers only reaching is not the edge of the screen.

    I only have the layout of office. As I had problems with the phone and Tablet page layouts. However there are are the banners and footers only reaching is not the edge of the screen. This is only a problem when accessing the site via a phone or a tablet.

    the site is www.excellententertainment.biz

    See you soon

    Hughie

    Do a Select all on your pages (most likely a master page is it effects all pages) and you'll probably find an empty element or element that goes beyond the edges of the design to the design of your office.

  • Problem with Internet Explorer and Windows Update on a Windows XP new install

    I just do a fresh install of Windows XP home.  When I went to Internet Explorer (version 6), the program open, but then soon a Microsoft error message said that there was a problem and had to stop.  I also found that Windows Update when activated is back with a message "[error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying to display." The options provided below may help you solve the problem. "I installed XP on multiple computers and have never encountered this.  Can you help me?

    You must be at Service Pack 3 level before you can use Windows updates.

    To determine which service pack is currently installed on your computer, follow these steps:

    1. Click Startand then click run.
    2. Copy and paste, or type the following command, and then click OK:

    winver

    A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

    If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    It is stated in "How to obtain the latest service pack XP" is.

    If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

    See also: http://support.microsoft.com/kb/2497281
    You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

    Internet Explorer:

    http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

    http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us

    Support for IE: http://support.microsoft.com/ph/807 Support for Windows Internet Explore 6, 7, 8 and 9

    Help and support for Internet Explorer. Links to the service customer and technical solutions, downloads, updates, and responses to the major issues.

    EI answers Forum: http://answers.microsoft.com/en-us/ie/forum

  • have windows vista with IE 9 and windows messaging gives me an error 0x800CCC92

    I am running vista downloaded windows IE 9 and now I can't go to my email with windows mail I receive

    Account: 'pop.mypcstv.com', Protocol; POP3, server response. ' ' - ERR problem temporary, please try again later ", Port; 110, secure (SSL): no, Server error:

    0x800CCC90, error number: 0x800CCC92

    What is my problem or what I am, I am doing wrong?

    Thank you

    Ron

    Hotmail is completely different from a POP3 account, it's a moot point.
     
    Did you get on the site of the Webmail Server with this password? I can't find that for TV of MyPC POP3 server settings then if it is a new issue, give it some time error said temporary, but if this account has never worked, tech support contact and get the appropriate settings.
     
     
  • compatibility issue with the software for Windows XP

    When I try to install a program, it says that I need to be runniing in windows XP. I try to install the program in compatibility mode and get the same message, and the program does not load. When I called the technical support for the program they tell me I need to download a donwload of compatibility for microsoft. I find no download for this issue. Thank you for your help.

    You could ask Zoll Medical to be more specific about any download (get a link) that they could help you.

    You are in contact with other users of this equipment you can ask them if they have similar problems and have any alliterative solution.

    Have you tried right clicking on the shortcut to the Setup.exe and choose the option "Run As Administrator"?

  • I can only run firefox with admin rights, and windows cannot find links sites. 0 x 00000002 (2) system cannot find the specified file

    I tried to install adobe, but said he can't because firefox is always on, I tried to uninstall it and download a new version, but it wouldn't let me.

    Hi Goondung,

    A. What is your default browser?
    B. do you receive this error only with firefox?

    Try to change the registry and check if it helps.

    1. go to "Start-> Run" (or press the windows key + R) and type regedit and click OK
    2. use the directory tree hierarchy to access the 'HKEY_CLASSES_ROOT\HTTP\shell\open\ddeexec '.
    3. delete the registry key 'ddeexec '.
    4. Repeat for 'HKEY_CLASSES_ROOT\HTTPS\shell\open\ddeexec' (and any other protocol that you want to solve)
    5 repeat for 'HKEY_CLASSES_ROOT\FirefoxURL\shell\open\ddeexec '.
    6. Repeat for 'HKEY_CLASSES_ROOT\FirefoxHTML\shell\open\ddeexec '.
    Important this article contains information about how to edit the registry. Make sure that you back up the registry before you edit it. Make sure you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

    If registry editing does not work then you can try to uninstall google add and check the status

    ·         You can also ask your question in firefox forums regarding this issue.

    ·         End the firefox process for Task Manager tab.

    http://Windows.Microsoft.com/en-us/Windows-Vista/end-a-process

    Previous post: the result.

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

Maybe you are looking for