Compaq 5008 MT, fresh install win7 pro. PCI slot does not recognize the card wireless linksys, (wmp54g)
My hard drive doesn't have the other day (western digital 320g). He left me stranded, I installed a new HD, installed windows 7 pro costs. Everything seems to work except for my linksys PCI slot wireless network card. In my control panel, I have a yellow on my network controller in the properties of the material.
All ideas, it won't let me add a driver?
I installed windows with the card in the slot, which shouldn't matter should it?
Averagejoe56553 wrote: windows 7 pro 64 bit, version 4 linksys
Hello Averagejoe56553, it seems that Linksys does not provide drivers for Windows 7 x 64. Wireless chipset used in the Linksys Card made by Ralink and they throw a few Windows 7 x 64 drivers for this card.
Here a link to Ralink is where you will find all the Ralink drivers.
Here is a link where the drivers for your card.
You will be asked to enter your name and e-mail address to access the doe to download these drivers.
If the one I linked to does not install or work on your Windows 7 x 64 system, try another version on the first linked page.
Tags: HP Desktops
Similar Questions
-
After installing service pack 2, computer does not recognize the cd drive
Original title: after installation of service pack 2, computer does not recognize my cd drive, I deleted the computer recognizes the drive but the programs are not yet loads
My burning software are not yet picking up the car, it says no recorder found or is just let me burn, I had none of these problems before I started to install the updates
Hi Shon S,.
Since you are facing problems after you remove the filters, you can try to uninstall and reinstall the DVD player and check.
For more information, you can refer to the following article:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
Hope this information is useful.
-
Reference Dell place 11 Pro - SD card does not recognize the card
Anyone else have this same problem? I got my 11 Pro last night (from Dell direct) coming, I tried several SD cards, and none of them does not seem to work. It does not recognize that anything has been inserted into the slot. Very frustrating.
Out of curiosity, have you tried different formatting on SD cards to see if it helped the recognition (eg. exFAT, NTFS)?
-Woody
-
Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery
Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA
Randy RichI found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2
-
New installation of XP PRO sp3 does not recognize the 500 GB HD
OK, here are the details:
System: Computer PORTABLE of Acer Aspire 1700 Pent4, 2 GB of RAM, 80GB (3.5 "full-size, trainee) IDE HD [this is the original HD on this laptop of size important which is designed to use disks 3.5" hard].
Initial situation: Windows XP Pro (SP3 integrated) installed on HDD of 80 GB and works without poblems. BIOS does NOT show the ability of the intern HD in the BIOS screen. BIOS reports only the model and the serial number of the HD, and there is no options to specify the HD type/format (e.g., MLA, etc.)
Available: Win XP Pro bootable CD slipstreamed with SP3; It is tested and verified work well to install PC or laptop!
When running XP Pro on a partition internal 80 GB HD, and when I join a brand new WD 500 GB IDE HD via USB, HD is recognized correctly. I can partition and copy data on the HD 500 GB with no problems!
When I replaced the old 80 GB HD with the new HD 500 GB HD interning on the laptop, I have the following problems:
1. I can NOT boot into Windows XP Pro (SP3) which was Ghost on the HD 500 GB of the old 80 GB portable HD it recharges, and if I try the console recovery or secure boot, then the laptop restarts also.
1B. I have Ghost xp partition to 80 GB HD to a piece of spare HD (40 GB) and replaced the 80 GB with the 40 GB HD and was able to start the laptop without problem. So the problem is NOT related ghost!2. I can't perform a clean install of Windows XP Pro (SP3 integrated) because Windows XP Setup recognizes the HD 500 GB GB 131 HD. Therefore, the remaining capacity is not recognized.
3. I can NOT perform the installation of Windows XP pro (SP3 integrated), even if I have previously partition new HD 500 GB by attaching it to a free desktop PC and use Partition Magic, partitioner of Paragon Disk or other partitioning tools. After partitioning prior, when the 500 GB HD is installed on the laptop (as a trainee HD), then win xp installation lists quality HD of GB 131 and lists the existing partitions as corrupt!
4. Curiously, if I use Knoppix, Debian, Ubuntu or linux boot CD Mint and start the laptop computer with one of these linux distributions, then the linux installer recognize the HD properly during the phase of recognition of material and later during the phase partitioning HD, the linux system to report a full capacity of 500 GB available for partitioning. In addition, when there are partitions, partitioning linux program then lists these partitions properly as well!
Considering the 4 points and especially MS Windows XP PRO (integrated with SP3, which should recognize HD with sizes exceeding 137 GB limit - from MS says you must be at least XP SP1 to overcome the size 137 GB limit - and that the different distributions of linux can see the full-size HD 500 GB with no problems) which is exactly the problem with Win XP? Why it does not recognize the full capacity? And how to win xp recognizes a 500 GB capacity, if the new HD is attached to the laptop via USB as an external drive when running XP PRO (SP3) of the 80 GB internal HD?
so... Can anyone sheds light on the issue with Win XP Pro installation on HD 500 GB IDE?
Nicely,
LO
Hi Palcouk and Doc,
I think that's the final answer!
Although, there is a mixture of simple to complex responses to the problem at hand, what it all comes down is that there is a significant difference between the installation of Windows XP and Linux installer program. The XP installation program needs help from the BIOS to deal with HD, and if the BIOS does not support, XP not has no facility to remedy the situation. OTOH, most of Linux new kernels rely on the BIOS for a limited number of extended, but communicate directly with the hardware, in this case, with the HD and therefore manages the material accordingly.
It seems among users of dual-booting (win/linux) using old PCs, it is a matter of very pretty. What they end up doing is using the first 137 GB that is seen by the BIOS without problem for XP (either as a single partition or divided into several partitions), and the rest of the space is used for Linux because linux has no problem.
I guess that it really nails the problem with my laptop to a BIOS NON-lba-48-bit!
Then close this thread as answered or matter who has more to say about this?
LO
P.S.: It was very nice meeting you fellows and appreciate all the help and tech expertise.
-
Computer does not recognize the monitor after update of Win7.
Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector. Suggestions?
It is a laptop?
And if you start in safe mode?
Desktop
Haven't tried safe modeDisconnected the projector, and then restarted; back to work now! -
Install Windows 8 does not recognize the system drive
I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.
Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.
The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.
I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.
Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.
This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.
Thank you in advance for any assistance.
Windows 8 Pro 64-bit (full version) - OEM
Intel Core i5 - 3570K
Card mother GIGABYTE GA-Z77X-UD5H
Crucial Ballistix 2 x 8 GB DDR3 1600
Crucial M4 2.5 "128 GB SSD (system disk)
WD Green WD30EZRX x 4 (data readers) 3 TB drive
Rosewill Challenger-U3 ATX Mid Tower Case
SeaSonic M12II 620W 620 Bronze PSU
ASUS DVD writerThe DSS must be LOW LEVEL FORMATE.
Once, there may be no other [HDDs] not connected to the SATA ports.
Install Windows 8 Pro now.
[Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.
-
Premiere Pro CC 2015 does not recognize my 4 AJA Kona card
Hello world
Premiere Pro CC 2015 does not recognize my 4 AJA Kona card. Here are the specs:
Computer:
Mac Pro 2013 (trash)
OS: 10.10.5
Map:
AJA Kona 3 G + 4 e/s
Installed in mercure Helios via Thunderbolt
I can capture in the AJA control room, the computer recognizes the card and my Mac Pro towers plays very well with the first CC 2015 + combo 4 Kona.
What I did to solve problems:
-Replace the mercure Helios with mercure Helios 2
-Replace cable Thunderbolt
-Ports exchanged
-J' tried CC 2014
-Restarted
-Standing on one foot...
Any help would be appreciated!
Hi Vinay,
What has ended up having to happen was 12.3 UN-installing, installation of 10.6.1, can upgrade to 12.3. Just solved! Thank you
jZ
-
In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this? I rebooted my MacBook Pro, but it does not solve the problem.
Details please
What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?
LN
-
Satellite Pro 6100 does not recognize the single battery external power
Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.
By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?
I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
Any ideas?
Concerning
PhilHello
Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician. -
PCMCIA card does not recognize the connection to the local network on Satellite Pro 4340
Hello world
I have 2 Satellite Pro 4340, running Win2K, SP4. I bought a card PCMCIA 10 / 100MB of Ultron (more or less no name :-))
When you insert the card, Win2k recognizes the card, but when the I plug the network cable, it does not recognize the connection. Cable is fine. It seems there is no power on the PCMCIA card. I read on some forums that there is a problem with the Topic100 Card Bus driver and voltage. I see that many people have the problem but not where to find the driver for the problem :-/ I couldn't find a driver on toshiba support site. A
ll have an idea, or better a link where I can download this driver? Any help is appreciated and thanks in advance for your help, support and answers.
CoreyIf this card needs a driver you will not find it on the download page of manufacturer of portable. You must check the card producer site.
As you know in the world of computers, it has set different standards. Produced very often cheap are not designed for these standards, and you can have different problems. I recommend you to use high quality products.
-
Printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.
Hello
- What were the changes made before the problem occurred?
You try to run this fix and check.
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
If above does not work, try contacting Lexmark support for assistance.
http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml
-
iMac does not recognize the function analysis of the LaserJet Pro
My iMac has OS X v. 10.7.3. It does not recognize the analysis function of the HP LaserJet professional M1217 MFP nfw which is connected wireless. I can print with the HP success but the dialog box not incllude not a scan option. I can't scan from preview or iPhoto or (as suggested by some rsources). I tried to connect the printer LaserJet by USB but that doesn't solve a problem either. I uninstalled and reinstalled the software, including HP PrinterDrivers.pkg. I get the automatic updates from Apple which have not helped.
Hello
I apologize for any inconvinence,
The Director of HP taken do supported by Lion for some specific models, including the M1217.
However, as mentioned above, only the latest version of the software supported by Lion. any prior version of the software is not supported by the operating system.
If you have not installed the complete softwatre features attached to my previous post, please be sure to install it. It is compatible with Lion you will find listed on the download page.
Compatibility: Mac OS X 10.4, Mac OS X 10.5, Mac OS X 10.6, Mac OS X, Mac OS X 10.7
I appriciate if you can guide me where you see the information that the HP Director is not supported by the OS, I can't take any possible measure to get it corrected.
Thank you and best regards,
Shlomi
-
Device drivers for a Win 7 install on Ubuntu system
Hello
I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed. I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not... So, how do you get drivers for Windows can install (or y at - it another way to work around it)?
Thank you!
The bios on fail safe defaults options are?
It will probably take the raid driver
-
Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.
Any ideas out there?
I know the pro 2 surface is not the real model, but at least it should work fine.arwinq,
You can see the system requirements, including the maps here.
https://helpx.Adobe.com/Illustrator/system-requirements.html
but I fear that you may be taken in this GPU issue described by butz in post #13 here:
https://forums.Adobe.com/message/7773402#7773402
You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.
Maybe you are looking for
-
iPhone7 +: what type of glass is used in the display
I tried to find in the description of apple for the new iPhone7 tech + but see no mention of the type of glass used in the display. Where can I find info on it? Type of glass Notation for the scratch resistance Rating for break resistance Hoping it's
-
Where can I find toolbar separators and spaces containing the separated my icons?
I've updated to Firefox 36.0 and I refreshed it was slow in its operation. My toolbars customization, I noticed that the separators and adjustable spaces previously, I had to keep my separated toolbar icons were is no longer included in the charge.My
-
It happened once that shortly after Firefox the default browser and I could not have restored functional, even after disabling restore on all drives, restarting and creating a manual restore point. I then did a clean install of Windows XP and found a
-
my new lptop does not illuminate
Hi my new hp i5dool will not turn... I checked the charger is perfectly supported WiFi light thinking... but the pointer is not on... including a new...
-
NET has disappeared on the side, how to fix
using the computer, then everything happened on the side. How can I get that standing back?