Compaq 610: update RAM for Compaq 610

Similar Questions

• Updating BIOS for motherboard Μatx-IG41-H on format Microtour Compaq 500 b

  OK, here's my problem;

  I just bought a 4GB Ram DDR3 1333 Mhz Kingston for my computer format Microtour Compaq 500 b. But when I try to connect this new RAM for my motherboard, pc gives error of RAM and that it does not open.

  It works well with other computers.

  Support members told me to update my Bios, but I can't find any update file which is updated. The only thing I could find is the following; http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = HR & prodTypeId = 12...

  I hope someone can help me with this.

  Thanks in advance...

  Here is the HP Compaq Business Desktop ROMPaq Firmware (ROM family CPT006) aka BIOS downloads for HP/Compaq 500 b/510 MT Professional computer. These BIOS/firmware updates do not appear to address any memory related questions. HP/Compaq 5xxB MT maintenance & Service Guide;

  Memory:
  The computer comes with synchronous dynamic RAM 3 double rate
  (DDR3-SDRAM) dual inline memory modules (DIMMS).
  DIMM DDR3-SDRAM:
  Media memory on the system card can be filled with up to two industry standards
  DIMMs. These media memory are filled with at least one DIMM preinstalled. To achieve the
  maximum memory support, that you can fill out the card system with up to 4 GB memory
  configured in a high-performance dual channel mode.
  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:
  240 industry standard pins
  unbuffered PC3 - 10600 1333 MHz compatible
  DIMM DDR3-SDRAM 1.5 volts
  DIMM DDR3-SDRAM strips must also:
  support the latency CASE 9 DDR3 1333 Mhz (9-9-9 calendar)
  contain the compulsory particulars of the JEDEC SPD
  In addition, the computer supports:
  512Mbit, 1Gbit and 2 GB non - ECC memory technology
  front and double-sided DIMMs
  DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not
  support
  NOTE: The system will not work properly if you install unsupported DIMM modules.

  The total State "up to 4 GB' plug... which is in both slots, therefore each slot can only use a 2 GB DIMM.

• RAM for use in DC7800 HP Compaq DC5800?

  I misordered little RAM for a compact DC7800 I noticed is marked for the DC5800. Anyne know if they are interchangeable?

  Thank you

  Hello:

  Yes it can.

  There is only a minor difference in the Intel chipset of series 3 between the two models, but the memory is exactly the same.

• Maximum RAM for old computer with operating system updated

  I have old a laptop Compaq Presario C700 initially provided with 1 GB of RAM and Windows Vista.  This computer has since been updated for Windows 7 32-bit and upgrade to 2 GB of RAM.  I checked Crucial site and he informed me that the maximum RAM for this computer is the 2 GB that I am currently.  Despite this, I read the posts of people successfully 3 to 4GB of RAM installed and still having their computer function properly.  I also read that the maximum RAM that can run on a Windows 7 32-bit system is 4 GB.

  Since I now have Windows 7, I will be able to further improve my computer to a 4 GB of RAM or the hardware of the laptop itself prevents me to do?

  The manual for a Compaq Presario C700 says on page 2 supports up to 2 GB of RAM:
  http://www.HP.com/CTG/manual/c01301275.PDF

  With all computers, you have two factors limiting the amount of RAM memory that may be installed, or the motherboard, and the version of Windows installed. In your case, it is the motherboard that prevent you from adding more RAM.

• Update of the modules of RAM for my desktop pc

  I want to buy G.Skill Ares RAM for my HP Pavilion G5460uk. The specs are below the RAM

  Model number

  Yes, memory G. Skill you watch should work. This would allow your system with 8 GB of RAM.

  Please send Bravo

• updated 32-bit to 64-bit vista if I can use the extra ram for FSX. but many download problems.

  Hello

  I'm a nut FSX but have very IT limited knowledge. I wanted to achieve the best result for FSX (this 2 me not a game cos I can afford is more to fly the flat light where I 300hours and noticed a true likeness in fsx to plans I stole) so I bought the new PC i7/920 call t0 3.6 ghz. NVIDIA gtx285. 6 GB/ram/166 corsair.and installs 3 x monitor @22 inch with TrackIR 5.I thought I was going to enter Heaven FSX. However majority or all of the FSX CD I my system 32 bits do not appear in the installation of 100%. I appreciate the new way of loading FSX in 64-bit is different from 32-bit, etc.. My main complaint is I lose my GPS function on mission downloads and it's not good. I understand there is a way to increase the use of the ram for 32-bit (works 100%) where there has never been a problem, but seems very complicated. I currently use the resolution of 1980 but 3 screen in place will be allowed to 1680 etc.. HOW can I REACH 100% DOWNLOAD WITH 64 BIT as I can with 32 bits, which is limited to 3 GB of ram. Any FSX readers in addition to my download problems, what I need to have an incredible fast pc including 4 times cheaper than my cp very dear son. FSX is super super smooth with cadence to the max

  Hey booleyz,

  Vista 64 bit is compatible with the game and you should get all the functions. When you download missions and if missing the GPS function, imply that there are no required files on the PC for the game. I suggest that you uninstall and reinstall the game once and see if it works.

  You can also try to reduce the graphic details in the game Options.

  Here is a link I found that contains information about this:
  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.simulators&tid=4b308963-5394-47f0-a8e2-7478ec338622&cat=en_US_f5c26c4c-9442-4038-ab1e-b3d34006e2de&lang=en&cr=US&sloc=en-us&m=1&p=1

  I hope this information helps.

  Thank you.

  Kind regards

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Extra RAM for Satellite L70-B-14Z

  Hello
  I cannot find anywhere how to adapt the increase ram for my new Satellite L70-B-14z, am I to guess that this model should be returned to the Toshiba authorized service center?

  We can just confirm that this model be OK to win 10 updated.

  I'll take delivery of this unit this week.

  Any help and advice will be great

  Tony

  According to specification for laptop, your laptop can be upgraded up to 16 GB. Unfortunately your laptop isn't the cover of RAM in the bottom corner so the whole bottom cover needs to be removed and it must be done by the authorized service provider.

  What about Win10? Win 10 support is not officially started, and now Toshiba offers no additional drivers for the upgrade. Anyway, you can download and install Win10 and test your machine, how it works.

  Before doing this, create a recovery (DVD or USB) media. This recovery media, you can use if you want to install the original version of Windows that you have with your machine and that he put your laptop to factory settings.

• Question about updating BIOS for Satellite 2450-101

  Hi, I want to update BIOS for my Satellite 2450-101 (model: PS245E-01TMY-IT). I downloaded the BIOS "bios - 20071008123347.zip" on Toshiba Europe site (see link below). Is this the right one for my PC?
  What do you propose to make a backup of the existing before installing the new?

  I want to make an extension of memory, but I'm not sure whether this is necessary. Do you reccoment to update the bios anyway?

  Thank you very much!

  BIOS

  Hello!

  Yes, it's the good BIOS because it s also for your model (Satellite 2450-101).

  A BIOS update is an upgrade of RAM is not necessary. The BIOS has nothing to do with the maximum RAM capacity.
  Satellite 2450-101 supports up to 1 GB, type PC2100 DDR - RAM.

  Good bye

• Maximum RAM for Y460N

  Hi all

  I want to update my RAM for my Lenovo Y460N, but I do not know the RAM max it can supports. Can someone advise me on this... COS of the user manual doesn't say RAM max... Thank you very much!

  Martin

  8 gb max7. PC3-10600 1333 mhz ddr33, no parity, two-channel capable, two sockets dimm 204-pin so.

  It is for the models y460, thanks for posting the submodel. (xxxx format)

• Pavilion dv6 1100sv: which RAM for my Pavilion dv6

  I need to update my Pavilion dv6 1100sv ram.

  Please tell me the type of ram I need.

  Thank you.

  PALAIOLOGOS

  Hello;

  Let me welcome you on the HP forums!

  I read your post on neediong RAM for your DV6 and wanted to help.

  According to the interview and the Guide Service for your PC, it uses SODIMM PC2-6400 memory modules DDR2 800 MHZ.

  If you want to confirm that on your PC, then I suggest you download and run CPU - Z from here: CPUID

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Automatic update failed for Excel 2003 (KB959995)

  After the initial update indicates a significant update was not tried again. She's not too, and I got code error 80070643. Who directed me to go to Services and check the engine for Service Bureau, set it for auto - delayed start and start it. However, I found that it was running OK, but did change the automatic setting - delay and left it running. Then, I rebooted the PC in the case where the other updates is in conflict with this one.

  I then tried to reinstall the update from Windows Update, and again once it failed with the same error code. I checked again the services and the OSA works well. Help!

  Under Vista Home Premium and Office 2003 w/SP3 on an AMD Athlon 64 3500 2.21 GHz and 4 GB of ram

  Hi Bergie532,

  See:
  http://support.Microsoft.com/kb/959995
  "MS09-009: Description of the update of security for Excel 2003: 14 April 2009.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/

• Good Ram for my Acer?

  Hey guys I just wanted to make sure if it's the right ram for my acer aspire E11 2.16 ghz laptop 11.6.

  http://www.Amazon.com/crucial-PC3-12800-204-pin-notebook-CT102464BF160B/DP/B006YG8X9Y/ref=sr_1_1?IE=...

  Then, I upgraded the ram to the Kingston 4 GB, but when I go to properties on my computer, it says now 4, 00GB but I noticed it says still 1.88 GB usable, am I missing something?   Also when I go to MSconfig and go to the option memory max I can now move the numbers up to 4096 instead of 2096 which was before with the 2 GB, so after changing this number to 4096 now that I have 4 GB, it asks me to restart so I do, when I check again on this subject , the number for some reason any is on 0.  What is going on?

  Update: nevermind, I thought about it.

• What the correct update BIOS for my Lenovo R61?

  Main question:

  I have a Lenovo R61 15.4 "laptop computer screen with IEEE. 1394  What is the good BIOS update version for my system?

  * The version on the Web the matrix file BIOS Lenovo page, 7KET72WW (1.22 - 1, 06), seems wrong and outdated compared to this page:

  http://74.125.45.104/search?q=cache: jqsAECxdXDoJ:www-307.ibm.com/pc/support/site.wss/MIGR-68183.html+7OET24WW&hl=en&ct=clnk&cd=5&gl=us

  which indicates that it should be 7OETC1WW (2.21). **

  Background:

  This Lenovo R61 laptop has always been slow and difficult, with performance much worse than my old XP system with worst record.  Originally, I tried to reinstall Vista to remove the useless factory software I thought may be responsible for slowing down the system.  This was the beginning of many problems.  I had added a stick of 1 GB 2 brand new RAM for the system, and I couldn't properly reinstall Vista with the ThinkVantage tools.  When I contacted the support, they told me it was due to the system are different from the original specifications (additional RAM).  It's ridiculous, but also to correct.  In addition, my Windows key at the bottom of the laptop sticker was scratched and unreadable, directly from the factory.  Support told me that the key is not useful or necessary because the only way to reinstall Vista is using the ThinkVantage tools.  Once again, ridiculous, but after removing my extra RAM, I was able to reinstall Vista.  This did not help the performance, even with the additional software deleted.

  On the current problem:

  I have experience several daily BSOD. Analysis of accident of Vista generally points to the USB driver, sometimes the network adapter driver and often does not return anything.

  I want to update my BIOS, but I don't know which version to use.  According to the information of the system, my system model is 8932CTO. The current system BIOS is the 7OET24WW version (1.03).  I did a search on Google for this BIOS and found the following cached page:

  [ http://74.125.45.104/search?q=cache: jqsAECxdXDoJ:www-307.ibm.com/pc/support/site.wss/MIGR-68183.html+7OET24WW&hl=en&ct=clnk&cd=5&gl=us] It lists the following:

  This version supports the following systems:
  -ThinkPad R61 - 15.4-inch wide screen models
  Machine types: 8930 8933, 8934, 8935, 8936, 8937
  -ThinkPad R61i - model widescreen 15.4 inches with IEEE 1394
  Computer type: 8932

  The latest BIOS for my system model number is indicated as:

  Version:     2.21-1.08Release Date:     2008/09/16File link             File size             File description7ouj13us.exe             2,728,120             BIOS Update Utility
  
  The BIOS history is shown as:Utility version  BIOS version    Previous release  Embedded Controller version2.21-1.08        7OETC1WW (2.21) Current release   7KHT24WW (1.08)2.20-1.08        7OETC0WW (2.20) 7ouj12us          7KHT24WW (1.08)2.18-1.08        7OETB8WW (2.18) 7ouj10us          7KHT24WW (1.08)2.16-1.08        7OETB6WW (2.16) 7ouj09us          7KHT24WW (1.08)2.15-1.08        7OETB5WW (2.15) 7ouj08us          7KHT24WW (1.08)2.14-1.08        7OETB4WW (2.14) 7ouj07us          7KHT24WW (1.08)2.10-1.08        7OETB0WW (2.10) 7ouj05us          7KHT24WW (1.08)2.09-1.08        7OETA9WW (2.09) 7ouj04us          7KHT24WW (1.08)2.07-1.08        7OETA7WW (2.07) 7ouj03us          7KHT24WW (1.08)1.07-1.08        7OET28WW (1.07) 7ouj02us          7KHT24WW (1.08)1.03-1.06        7OET24WW (1.03) 7ouj01us          7KHT22WW (1.06)
  

  The first version of this list, 7OET24WW (1.03) matches the BIOS on my system, which indicates that I have to upgrade to the current version, 7OETC1WW (2.21).

  This page shows that my system model supports IEEE 1394 (Firewire), and of course, the Device Manager shows a RICOH OHCI Compliant IEEE 1394 Host Controller, even if my laptop is not a firewire port!  Then...

  QUESTION: why does my laptop have an IEEE 1394 controller, but no port?  It is used to something else? Safely disable the controller driver if it is pointless?

  The same page also lists the history of BIOS for thise models, and the current BIOS version does not match the name on the matrix of the file BIOS Lenovo - ThinkPad page here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=BMOE-3VAM8Y#r

  BIOS version          BIOS release date  Embedded controller version  Embedded controller release date
  R61 14.1 inch widescreen with IEEE 1394
  7LET52WW (1.22-1.06)  19 Sep 2007        Included in the BIOS Update Utility
  
  R61 14.1inch and 15.4inch widescreen without IEEE 1394
  7KET72WW (1.22-1.06)  28 Aug 2007        Included in the BIOS Update Utility
  
  R61 15 inch
  7QET25WW (1.07)       09 Sep 2007        Included in the BIOS Update Utility
  
  R61 14.1inch and 15.4inch widescreen without IEEE 1394
  7KET72WW (1.22-1.06)   28 Aug 2007       Included in the BIOS Update Utility
  

  My computer is a R61 widescreen 15.4 inches with IEEE 1394 (at least the controller).  NONE OF THESE VERSIONS OF BIOS MATCHES THE OTHER PAGE, I FOUND, WHICH SEEMS MORE ACCURATE!  Also, only one of the many, many BIOS versions presented on this page are from 2008.  So the page of the Lenovo BIOS file matrix totally out of date or what?

  What version of BIOS should I use to upgrade my system, and what else can I diagnose these BSOD and performance problems?

  Agotthelf is correct; 2.21 is the latest version of the BIOS, and to install it, you must burn it to a CD as an ISO file. I was too lazy to do.

  My R61, too, is the 15.4-inch (1680 x 1050) model, but unlike you, I have XP Professional and a 1394 a miniport. The reason your system shows Firewire, it's Ricoh Board which controls the 4 - 1 or 5-in-1 memory card reader includes the R61 Firewire controller. I guess it's convenient is you decide, as I do, to add a CardBus (or, as the case may be, an ExpressCard) with full major ports 1394 a(1) FireWire, 1394b (FireWire 2), or both.

• 32 GB or 64 GB of RAM for After Effects CC 2014?

  -All right, let's do this:

  1. System Specs:
  3. Card mother Asus X 99 Deluxe Usb 3.1
  4. 32 GB DDR4 RAM Corsair
  5. Intel i7 5960 x @ 3.0 GHZ CPU
  6. 2 x EVGA NVIDIA GTX 970 s
  7. Samsung 256 GB 850 Pro (boot drive)
  8. 1 TB Samsung 850 Pro (Cache, Source footage, rendering output, etc. By car)
  9. Seagate 2 TB HDD (backup drive)
  10. Thermaltake 1000W PSU gold
  11. Corsair H105 cooler of liquid

  So, I do create After Effects compositions really intensive (usually from 10 to 20 layers by composition) and to make use of almost all the effects, there (as the displacement of pixels, motion blur, etc.) for many of my compositions.  32GB has worked pretty well, but I recently had a problem where the computer recognizes only 8 GB of RAM; in view of this, I noticed the huge difference in performance after effects CC 2014 between 8 and 32 GB (8GB off multiprocessing, for example).  This makes me wonder... saw how intense my compositions are, 64 GB would create a noticeable difference?  I have the ability to be upgraded to 64 GB right now (optionally) for free by "scheming and business."  What types of performance gains I could expect from 32 GB to 64 GB DDR4 DDR4?

  The performance gain would be very important for After Effects. Go ahead!

  Premiere Pro (this forum) isn't really helped a lot when the RAM is updated past 32 GB, but After Effects uses RAM for previews and may even beg for more than 64 GB on systems either.

• Can I update OS for iMac (early 2008)?

  Can I update OS for iMac (early 2008)?

  The OS is currently 10.9.5. I want to upgrade the operating system to something a bit more recent. It cannot be upgraded to Sierra.
  Can I go to Yosemite or El Capitan etc.? If so, how?

  Click here and download El Capitan.

  (145120)