Compaq 6910p - wireless adapter turns off when the ethernet cable is connected
Then, when I plug in an ethernet cable (connected to a router), my wireless adapter turns off.
He immediately turns on when I unplug the ethernet cable.
It isn't really a problem, either connection will provide my needs of networking, but it's just weird and I don't like it.
Using Win7 Ultimate 64 bit.
advice would be appreciated.
This is the default setting to save the battery.
If you always want the wireless on, go into BIOS > Menu of device Configuration and activation to deactivate WLAN-LAN.
The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?
Original title: clear the display
Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.
Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.
You can now close the Power Options pane when you return.
I can't stop my P300 correctly.
Whenever the ethernet cable is plugged or wifi is connected, stop work until the screen goes black but the power remains on: fan, always active LEDs. The only way to stop then is to press the power button.
As the network is always connected, it's really annoying.
Can you please help?
Very strange problem
First have you checked if you use the latest version of the BIOS?
Please check this!
On the European driver Toshiba page you will always find the latest BIOS and divers.
Secondly, I would recommend disabling more upward on LAN option in the BIOS and in properties (device-> LAN properties-> Advanced tab management) LAN card
Check if this may help solve this problem
Recently my original adapter has stopped working and I bought a new one. However, the problem with this new is that when it works perfectly until you hear the windows that open sounds and then she just turns off. But when I plug the AC with the battery connected to the laptop, it works fine. It's just that it will not correctly work with just the AC is plugged.
HEY Fan Wai,
It seems that your new adapter cannot supply enough current to power your laptop when it is under load. I suggest you check the rated power of the new adapter agaoinst those of the original.
I have problem with my system. every time I connect a projector or a HDMI my system stays for a short time and shuts...
Thanks for posting your question on the Forums of community of Microsoft.
- The computer completely off, or only the monitor turns off?
- You get an error message or a blue screen while the system is turns off? If Yes, what is the exact error message you get?
- What is brand and model your computer?
- Apart to plug the projector, does this problem occurs in all other conditions also?
- What happens when you try to turn on the computer later, with a projector connected?
I suggest you to check if the computer shuts down completely or only the monitor turns off. If the computer shuts down, the problem may reside with the graphics card driver that fits inconsistent or has become unstable or corrupt. Therefore, I would suggest trying the following steps and check if the problem persists.
- Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
- Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
For more information, visit the below mentioned link:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer's Web site and download & install the latest driver. Or contact the manufacturer of your system to do.
Hope this information is useful. If the problem persists, please post back with answers to questions for assistance, we will be happy to help you.
Windows 7 64 bit, HP DV4 laptop. Was working fine until the update of adobe reader may also have a windows update. Have since been uninstalled adobe reader software and reinstalled. Updated the qualcom wireless driver. WLAN keeps logging service when my laptop goes to sleep. I can restart with services and it works again. Autoconfiguration WLAN service is set to restart the service for 2 trys.
. You receive an error code or message?
Please follow the methods and mark the question below:
You need perform a clean boot to prevent possible ask contradictory from interfering with your computer.
To put the computer in a clean boot state, you must follow the steps in the article mentioned below. How to solve a problem by performing a clean boot? : For more information on the execution of clean boot, follow the link.
Note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.
Using the troubleshooter from network in Windows 7:
Why am I disconnected from my network? :
Wi - Fi and in Windows network connection issues:
I hope this helps.
Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.
As you have a laptop, better make this laptop in the computer Forum post here:
Tip: when you post a message, preferable to always include the computer model.
original title: power problems: computer shit turned off when the power supply cord is unplugged.
I have a HP Pavilion dv2000
Windows vista home premium/sp2
AMD Turion (TM) 64/2 1.80 ghz processor
1 GB memory
32 bit operating system
I have 2 problems with this laptop.
!. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)
When I first plugg cord battery charge light came on the balance, then he started to come on and outside.
now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.
the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.
Any help will be greatly appreciated.
(a) what kind of mouse you are using?
(b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?
Step 1: Test the mouse on another computer or another mouse on the test computer
To determine whether the mouse or the computer is defective, follow these steps:
1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.
2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.
In regard to the battery not holding charge
Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.
Troubleshooting battery problems
Thank you, and in what concerns:
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
HP printer all-in-one B210a win 7 64 bit.
no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls. power saving mode is turned off, but still goes to sleep.
First, you will need to make sure that the printer is under warranty. You can do it here. So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.
When testing my application on a Z10 android port the accelerometer turns off when the screen is off. A partial wake lock does not turn the sensor back on. A wake dim screen lock is needed to re - turn on the detector. This behavior forces the screen to be all the time when an application requires the use of these sensors.
An example would be a pedometer recording the steps throughout the day. In order to operate the screen must be turned on by the application that runs in the background. This will cause a fast draining of the battery and is not an acceptable solution.
On Android, a partial wake lock is enough to keep the accelerometer running.
I think this should be reported as a deficiency, a lot of motion carried since Android applications will be blocked by this and my app port is one of them.
Tested on system Z10, model number STL100-3. Version of the 10.1.0.273 software
The fix will appear in MR 10.2, 10.2.1 aka.
I recently submitted a fix for the problem.
Public folder of Windows Vista sharing problem.
Whenever my pc is disconnected from the internet sharing files turns back on. Options: network discovery, file sharing and public folder sharing will turn on if the ethernet cable is removed and plugged. How can I prevent this from happening.
1. Since when are you facing this problem?
2. don't you make recent changes?
I suggest you try to perform the clean boot and check if it helps:
NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
For more information, see this link:
It will be useful.
Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control. I need the laptop screen too. It started just after years of correct use.
Original title: VGA:
In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...
Hey all. I desperately need help. I have a laptop "Durabook" with Windows XP meidand service pack 3 update. The internal speakers have never turned off when I plug a headset or headphone cable of the adapter into the outlet. It is an option that I have figured out. All my other laptops have silenced the computer speakers when headphones are connected.
The most frustrating problem I have is in Media Player when you use the tab OUT, when I insert a cd Ripper in the computer, it is not recognized. If I close and reopen WMP (Windows Media Player) cd, the cover and all the info of the cd is here and ready to be torn APART. Once the cd ends and ejects I insert another cd and nothing happens. Once again, I've closed and reopened WMP and evrything is ready to be torn APART again.
Please please help. I can't be the only one who had this problem. I removed all anti-virus programs, removed and reinstalled WMP, twice.
I'd appreciate any help.
Thank you all
Carl aka theSTUNG1
1. don't you make changes before the show?
Try these steps and check the result.
Step 1: Check if a parameter to extract music select "Always".
a. open Windows Media Player 11.
b. click Extract, click more options.
c. click the rip music and make sure 'Always' is selection in accordance with article "Rip CD when inserted.
d. click ok to apply the changes and restart the media player.
e. check if the problem persists.
Step 2: Make sure the headset is plugged into the socket on the right
a. connect the headphones to the right sleeve and check the result.
b. you can also right click on the volume icon and adjust the sound settings.
Visit our Microsoft answers feedback Forum and let us know what you think.
I bought a brand new ThinkPad T460 ten days ago and I noticed that when I plug in an Ethernet cable, the touchpad responds: just a few clicks and taps are missed, the movement is slow and and sometimes temporarily blocked. The touchpad comes alive again as soon as the Ethernet cable is disconnected. The trackpoint and trackpoint button above the touchpad are not affected, only the touchpad starts to misbehave.
This happens on both Windows and Linux, this isn't a problem of specific operating system. Furthermore, I checked to see if I am running the latest version of the BIOS, and I am. And there are no problems when you use the wireless adapter, but one of the reasons why I bought a ThinkPad was she has a port Ethernet, so not being able to use it would be extremely disappointing.
I checked to see if there are any IRQ conflicts for the touchpad, but could find none. The problem occurs when the computer is plugged in and when it runs on battery only. I also tried two different cables in the same router, each in a different router port, and the problem persisted.
I'm using the latest drivers for Windows 7 directly on the Lenovo site, and Arch Linux with kernel 4.4.5 - the Ethernet card is considered:
e1000e [2.751703]: Intel® PRO/1000 3.2.6 - k network driver
e1000e [2.751705]: Copyright (c) Intel Corporation 1999-2015.
Should I expect it is fixed with a BIOS update, or do I have to contact guarantee? It is unacceptable to live with it.
Tried in another House as promised, and the touchpad works very well with cable Ethernet is plugged. Also, before you leave the House with the problem, I discovered that the problem occurs only when the cable from my ISP switch is plugged into my router.
Respect my opinion that this machine deserves a stronger touchpad, but apparently is not due to lack of computer - under normal circumstances, there is no problem with the touchpad.
I'm stumped on how to proceed. Can I use a multimeter on the ISP switch from cable, but I'm not sure what to check (voltage? how does and between what son?). I'll also look into the suggestion of ferrite, I don't know where they are available - this thread is first heard of them.
Anyway, I wanted to just erase Lenovo name on it.
Currently I am facing problem with my touchpad. When my ethernet cable is pluged in my touchpad no longer works, and as soon as I remove my ethernet wire touchpad started working. Earlier when I plud in power with pluged wire ethernet cord in the touchpad used to work, but now the tht has also collapsed.
Pease help me guys CIHI.
> When my ethernet cable is pluged in my touchpad no longer works, and as soon as I remove my ethernet wire touchpad started working.
Hmmm... strange question. Maybe, it's driver conflict problem. In any case, try reinstalling driver Lan and touchpad. Before you update, edition of lan and touchpad drivers (usb mouse may be necessary after edition touchpad driver). If there is still problem, restore the settings from the factory with a recovery disk...
Maybe you are looking for
I lost the hard drive with all my music on it. I tried to download them because they were purchased on Itunes. These songs are all have the exclamation point in the circle. There is no other choice when I upload them to the store. If I delete the son
I've upgraded to the latest version yesterday and when I went to a website of the Government today, it tells me that I have no access until I have activate the Virtual Machine (JVM) Java. How can I do this? (I access this site using Internet Explorer
Currently, using Windows Vista Ultimate 64-bit service pack 1. After that I restarted the computer to finish the update/install Windows I can't use the functions from the Start button. Any attempt also runs programs through the Task Manager is met ev
It is time to dispose of my old computer. I put all my files I want on a flash drive. What is the best way to remove all my personal files and information? Thank you CAT
It is a SEAGATE HDD.I have XP Pro with SP3.