Compaq dc7800: DC7800 CPu id and BIOS update probem

Similar Questions

• Compaq dc7800 not DETECT in bios network controller

  Compaq dc7800 not DETECT in bios network controller when worked fine yesterday

  Hello:

  If I clear the CMOS and see if the PC learns the material.

  If this does not work, I have to assume the on-board NETWORK interface has failed and you need to add a PCI or PCIe NIC card.

  Please see the below troubleshooting guide, annex B, page 60.

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c01162207/c01162207.PDF

  Paul

• Configuration at the request of update Retriever to download only the drivers and BIOS update?

  I'm looking to automate the update of extractor and our organization doesn't want or need additional software such as SHAREit or WRITEit, just the drivers and BIOS update. Is it possible to retrieve only the BIOS and the driver for the repository updates?

  Thank you

  At one point AHA a little there, discovered that I can mark the drivers/software I want installed as test or hidden mode and ThinInstaller don't provide that updates available, which works very well for us.

  Thank you

• Compaq dc7800 CMT: PCI and PCIe versions

  Hello everyone, I want to install in my pc (Compaq dc7800 CMT) into the slot one SATA controller card PCI or PCI Express.
  So I would need some information:

  What version are PCI slots (for example 1, 2.2, 3,...) and the pci express x 1 slots (for example, 1.0, 2.0,...) of the motherboard of this computer?

  This motherboard is adjustable to boot from a drive connected to a SATA PCI or PCIe controller?
  Thanks in advance

  Hello

  You can see in the patterns of chipset and the plug.

  PCI Express x 1 1.0 (500 MB/s) but is difficult whether the BIOS can be started PCIE SATA Adapter

  Intel® Q35 and Q33 Express for laptops

  Concerning

  

• CPU and BIOS update problem

  I have a M57P 6395 33 M system and some time ago I added an E8500 CPU, I thought it would work even if Lenovo not listed the E8200, E8400. I was a little disappointed and I still wonder WHY lenovo gets SO specific with CPU connection. I don't see why she accepts only 2 CPUs and no other?

  Well, I bit the bullet and found an E8400 to put in the machine. I added CPU, removed the MB battery and left out for a while then went back on the new shoe, set all the necessary info. The first part of the BIOS screen mentions that there lies an E8400 (as he did for the E8500) but when it goes through the boot process it is said AGAIN that the CPU code is not enough to recognize the E8400. I am now confused.

  When I updated the BIOS, I used the that I've been led to believe was the GOOD .54KT23AUS (through the windows), but I still get the error 0167. It would be better for me to put the back E8200, re run the BIOS update using a CD?

  and there is another update of BIOS listed for the M57P 2RKT64A, I wonder if it would be better? It is not for use on 6395 but, the FIRST thing listed for THIS update is an update of firmware of CPU.

  I know that this means not much to all the world and I hear people say 'why bother? ' but I would use the machine as I'm n ot offer a more recent machine as I am a pensioner.

  A little help please.

  Thanks a lot for the quick response. I tried Flash via the CD with the E8400 in and it would not allow me to do when he came up with the error of CPU to half way through. I have since updated the E8200 back and did the BIOS update through the CD. The machine seems to have taken the update of the better BIOS this time but, the E8400 still does not work

  As for the E8400 CPU, I have an Intel CPU program on the computer and deepening classified by it for the E8400 says it's A07? However, I can't find any info on it. I guess I either will set up with hitting the F2 key when I start with the E8400 inside or just keep the E8200.

  I finnd the info on these rather confusing processors. The Intel CPU app I have gives me different information from a site like CPU world. The TDP of the processors are 65W but the ONLY thing I see different is the deepening of the base. The E8200 is listed as C0, while the E8400/8500 are E0. Why who would have much effect on the use of the more major? You would have thought that Lenovo engineers could make the system accepts the E0 revision or what is Lenovo wants to sell a new machine?

  Like I said, it's a shame that Lenovo is so affected by these machines with tunnel vision. Well

• Portege Z810 and BIOS update 1.80

  What the BIOS for Portege Z830 update (PT224 / PT225 / PT22L), version 1.80 do?

  The description says fair + "This BIOS update adds functionality to your system." +, and I couldn't find anything about this website more Toshiba on. The update has been published on 24-05 - 2013.

  I assume that Z810 Portege European must be like us Z830/Z835 (PT224x/PT225x) so I ve checked the page American support for the update of the BIOS and here's the info on the BIOS updates:

  + Version 1.80 - 2013-04-25 +.
  + Optimized a BIOS setting to improve the reliability of hibernation RESUME. +

  + Version 1.70 - 2012-09-12 +.
  + Implemented the Intel specification for stability - put MEBX up-to-date at 7.0.0.0063. +.
  + V1.30 EC/KBC: ensures better stability. +
  + V1.30 EC/KBC: changed the method of detection of power supply error. +

  + Version 1.50 - 2012-02-13 +.
  + Add a boot LOGO sequence for ZAT (GPS) models. +
  + Improved: Control of the TPM on Intel TXT module enabled systems. +
  + Implemented a fix for a problem where the BIOS password can be entered when it is configured as follows: 1. wired USB keyboard is connected to the port replicator. Wireless USB mouse is connected to a USB port on the computer. 3. computer is docked in the duplicator. +
  + Implemented a fix for a problem where the BIOS password can be entered with some USB keyboards. +

  + Version 1.40 - 2011-11-15 +.
  + Improved: The TPM on Intel TXT control enabled systems. +

  + Version 1.30 - 2011-10-27 +.
  + Initial production BIOS for these models. +

  I hope this will help you.

• Equium M40x-189 and BIOS update

  There are updates of bios for my laptop, and so I thought I would try a flash update. I can only find the Trad version and not the flash version of Win.
  the problem is that the traditional flash update file asks you to create a bootable cd for the update procedure. Software CD, Toshiba in their wisdom have provided a cutting of the version of "save now". Guess what this special version of toshiba cannot create a bootable cd you have to spend £25 for the full version.
  Someone knows, there is a version of the flash upgrade Win

  Hello Andy

  As far as I know just BIOS updates listed on the download from Toshiba site are available. I guess that your unit is a relatively new. If you have any problems with this device do not do any BIOS update. Only if there is a problem the update of the BIOS by using external devices or something like that is recommended.

  Good bye

• Satellite L40 PSL48L: No noise and Bios Update after installing XP

  Hai guys

  I have a toshiba laptop psl48l-0200u and lowered the score on XP Professional, but realtek audio does not work.
  At the launch of the facility, there is an error message "realtek audio installation failed.

  I think that this may have to do something with bios - then I downloaded Bios for XP and extracted into a folder - but the update of the bios.

  Help, please
  Thank you

  What to first say if you installed XP on your laptop, then you should also update the BIOS to the version of Win XP.
  The BIOS update must be performed on Windows XP!
  Simply run the exe file and follow the instructions on the screen.

  Regarding the sound issue.
  Well this problem is not related to the BIOS, but you have not installed the XP patches!

  Have you checked this forum for a similar question? I don t think so.
  I found this example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=59&ThreadId=25916

  or this

  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  As you can see, you need fixes KB888111 and KB835221

  Good bye

• Satellite U300 maximum PSU30E of expandable RAM and Bios Update

  What is the maximum expandable ram for the U300? The last update of the bios will allow two sticks of 4 GB of ram for a total of 8 GB?

  Only, I ask this because there is no history of clear version with the Bios Toshiba updates.

  I appreciate all the advice, thanks in advance.

  Hi Bob

  I'll try to help. Let's go:
  > What is the maximum expandable ram for the U300?
  Satellite U300 with model number PSU30E-xxxxxx can handle with 4 GB RAM max.
  > The last update of the bios will allow two sticks of 4 GB of ram for a total of 8 GB?
  N ° BIOS update has nothing to do with it. There is limitation chipset.

  If you have any other questions let us know.

  Good bye

• XPS 15 9550 CPU speed is as low as 0.75 ghz after manually installed windows 10 with all the drivers installed and BIOS updated

  I just bought this XPS 15 9550 in January, and I really appreciate it at first.

  However, one day, as pushed microsoft update to 10586 version of windows 10 and the machine will always fail to install the update, so I decided to download the image file and install it myself.

  The installation went smooth, but after a few days use, I found the computer is very slow during playback of videos and games and I came to find the speed of the CPU shows the label of performance in the Task Manager always will be 0.75 ghz and 0.78 ghz. He cannot go above that. I also found that the use of the CPU cannot exceed 30%.

  I've already updated my BIOS to 1.1.19, reinstall the system, a few times, choose the battery mode high performance, etc and this does not help.

  I also downloaded the power of intel and found gadget for my processor power consumers are still weak and the speed of the CPU is always not 0.80 ghz.

  In addition, I encountered the problem that after plugin the AC power, the speed of the CPU will fall to 0.39 ghz...

  Someone at - it an idea of what is happening here and how can I solve the problem? I'll really appreciate it. Thank you.

  I had my problem is solved. Follow these steps:

  1. download gadget power intel, you can search online for it.

  2. check the power of your CPU (package pw...) rate and open the videos and applications that will constantly consume the CPU power. See if the power is still weak.

  3. If the power is still weak, try to update your BIOS (download dell drivers and the new version should currently be 1.1.20) and see if things are getting better.

  4. If the power is still low, you must contact dell technical service to replace your hardware (my computer has replaced the northbridge, southbridge, I forgot, but after replacing, the CPU works fine)

  Note: If you run games using your discreet graphics card, such as starcraft II and you found that it's extremely slow, it is possible that your cpu is capped.

• Tecra 8100 - CPU max, DVD - ROM and BIOS update issues

  1. I have a 500 MHz processor on my 8100. I would like to upgrade to maximum capacity. I think it's 800 MHz since it is the highest, the series went to.
  But if it's 800 MHz, any Mobile PIII on this frequency do? Or should I check for special settings of the processor?

  2. I don't have a floppy, or ways to get drive one. And I'm not going to ebay one just for an update of the BIOS. Any ideas? A bootable CD with the files will do?

  3. What is the location of the DVD-ROM and what alternative models can I use? The 8200 went up to 8 x DVD - RW. Could I go further?

  Thank you. I hope that my post is OK like this instead of three different positions.

  1 take a look at the other Tecra 8100 models to determine which processors are compatible.

  2. I don't think that would work a bootable CD, you must follow a special procedure to update the BIOS and requires a floppy drive. If there is a version of Windows, you must use that instead.

  3 upgrade the DVD player can be difficult because you must use the correct master/slave settings, and it must have the same design of the façade of the original.

  Personally, I'm selling the laptop and buy a second hand faster one. It can work out to be cheaper.

• Update satellite A200 - 14F CPU T7400/T7600 and BIOS update

  Hello

  I want to upgrade my current Core Duo T2450 CPU to something faster or T7400, T7600.

  I know that PM945 will manage it but what about the BIOS? I have 1.80 which is the last for my model.

  Where can I find that some BIOS change log to see if the newer processors are supported?

  Are you sure that you want to upgrade the processor?
  An upgrade of the CPU will not bring much more performance but mobile CPU's are fairly expensive and maybe they are not supported in the BIOS or motherboard.

  Moreover, Toshiba doesn't support a CPU Exchange. You can do this, but at your own risk.

  Normally a BIOS change log you can find on the driver of Toshiba download page, but if you can find t we Web does not exist on the site.
  But I'm pretty sure that Toshiba doesn't add new taken processors supported by a new BIOS because it s not supported.

• Satellite A210 - heating and BIOS update problem

  My aunt was having problems with his A210, so she bought herself a new and gave me the old one. The problems that she has been seen was the computer kept stopping at random. I think it's an overheating problem because the laptop runs quite hot. The BIOS has never been updated so I thought that might help with this problem. in any case, when I tried to update the BIOS this error message came.

  Cannot load the C:\Users\Dan\Desktop\MK10AWF\PHLASHNT driver. SYS.
  Please verify that your accounts, if you have no administrator privileges, please sign in again!
  Access is denied.
  Error code: 5

  I am the only user on the computer so I have administrator privileges and I don't know why this error is coming. Help, please. Thank you

  > Has anyone else experienced problems with the A210 of overheating? All solutions?
  Hi mate

  I m a Satellite A210 owner and to be honest, a higher internal temperature might occur if the laptop would not get enough air to cool the internal parts like CPU and GPU.
  A few weeks ago, I used the laptop on the sofa I don't the opinion of t that the cooling that are placed at the bottom of the unit fans were clogged because of my position relax, if you know what I mean ;)

  After a short period of use, the laptop shut down automatically I was a little surprised, but I realized that air could not circulate, and so the laptop overheated

  Now, I m using the unit only on the desktop. This method is recommended, and it helps to keep the temperature at the lower level

  PS: My BIOS is updated...

• Compaq 061 sees no audio after BIOS update

  I have a Compaq 061 dual-started between Win XP and Win7 x 64. I've recently updated my BIOS (to correct a startup problem) and now Win7 will not see my audio device (Realtek). However, my boot Win XP still sees, which confuses me. Any help?

  If you have access to the previous Bios then try to downgrade to the previous version.

• Satellite T210 - Windows 8 x 64 drivers and BIOS update

  Toshiba support would anyone tell me if and when we can expect Windows 8 x 64 drivers for Toshiba T210? The equipment is fairly standard. I'm sure it's very easy to compile the drivers available in the official version

  I also wanted to know like when Toshiba T210 finally gets the update of the BIOS. Its current version of BIOS is 1.60 while many other models similar and earlier jumped to version 2.2 of BIOS and above

  Kind regards

  It is user forum so that you will not receive response from Toshiba support directly.
  What I can say is followed by:
  All about Win8 on Toshiba laptops, you can read on http://www.toshiba.eu/innovation/generic/windows8-message/
  Under the terms of the Toshiba compatibility matrix, you can check if your phone model is supported for Win8 or not.

  What about BIOS. Toshiba doesn't offer updated BIOS if there is not a critical issue or a reason for it. If your piece of hardware working well and stable there is no reason to update BIOS. What do you expect should happen with the latest version of the BIOS?