Compaq dc7800 not DETECT in bios network controller

Similar Questions

• HP configuration wizard does not detect my wireless network.

  Hello

  I have a HP Photosmart C4580 multifunction device for a few years, works as a printer/scanner wireless for the household. In the House, we have an iMac, a Macbook Air and two computers HP laptop.

  Last weekend I bought a MacBook Pro in lieu of the iMac and a router Airport Extreme Base Station to replace my ISP provided. Since then, I can't have the printer hooked up again.

  All the wireless devices in the House for example iPad, iPhones etc connect the new router without problem so I'm glad that the wireless signal is OK.

  I downloaded the latest HP Setup application and it ran with the printer connected by USB to install on the MacBook. However, even if the USB device is detected when I try to configure it to the wireless, the installation software does not detect my wireless network.

  I tried the following: -.

  -Rebooted router

  -Reset default printer is turned off, unplug the unit and unplugged the cable, left for 30 seconds then reconnected again.

  -Created a new comments system.

  -The router is configured to run g and n network.

  -The network names have any unusual characters.

  -Tried to enter the name manually.

  USB printing is fine.

  Is there something about the installation wizard that can not locate networks?

  OK, on the front of the printer, go to wireless menu and restore the default settings.

  When you start the HP software to connect the wireless printer, make sure that the USB cable is NOT connected to the printer.  Only connect when the software tells you to do.

  Be careful with the comments network, if your computer or printer connect you will not be able to print.

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• Generic adapter Bluetooth is not working properly and network controller has no driver

  I use the version ultimate windows 7 in my computer dell laptop inspiron n5110.

  After reloading the OS, I started to deal with the following issues:
  
  
  Generic adapter Bluetooth is not working properly
  Windows has detected a problem with the generic Bluetooth adapter.

  The device information: generic Bluetooth adapter

  ID: USB\VID_0CF3 & PID_3002\6 & 58952F4 & 0 & 4

  Error code: 43

  Network controller is not a driver

  There is no driver installed for the network controller.

  Name: Network controller

  ID: PCI\VEN_168C & DEV_002B & \001517FFFF24141200 SUBSYS_02051028 & REV_01

  Error code: 28

  You will need to download and install the drivers from here:

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-15R-n5110

  Choose 32-bit or 64-bit, depending on what you have.

  SC Tom

• Alienware 14 - integrated graphics not detected in BIOS

  Recently my NVidia graphics card was not detected in the bios and in Device Manager, so I contacted Dell and they replaced my motherboard (NVidia is built into the motherboard). Now I can see my NVidia card in my system. But original window 8 still gives me blue screen error (ERROR FATALE VIDEO) and when the pc is restarted, NVidia has also disappeared. But I see once again when I shut down and turn on again. So, I use my own 8.1 window, and all is still ok, now with the exception of two errors.

  First one, it of my intel graphics hd went and not detected in the BIOS. I don't want to run on NVidia card all the time.

  Second, one is that I can not install my killer LAN driver for my LAN network. I can only install driver wifi.

  Is it because of 8.1 window problem or hardware problem? I hope the technician Dell can help me. Thank you.

  Now, I solved the problem. Thanks for your advice. Problem is that in windows 8, I can see the two crads graphics in Manager mode optimus devices or not. But in windows 8.1 I don't see them both when I'm in the mode optimus, only nvidai map is visible in Device Manager. But can see them both in mode no optimus. Hope that the answer will help others.

• HARD drive is not detected in BIOS - need to recover data.

  What happened is that my laptolaptop takes a long time to start, so I slapped him. After that I kept getting the error message "no boot device, please restart". So whenever I restarted I kept getting this message. I also sometimes had "Media Fail" message. I pressed F2 at startup to get into the Bios. Settings so check I saw that hard disk still showed it's a Hitachi one.

  My hard drive was clicking to it so I searched online advice on what to do and I saw on the opening of the hard drive in a clean environment, ensuring that no dust went on the drive. I expect the head being stuck on disc, but it was not stuck. So basically, I put the lid on. Since then, the hard drive was not detected.

  Not in the Bios (he said no). I bought a CD to restart which can temporarily become Windows to the screen under Xp, so I can go to the computer to retrieve data from the hard drive. It shows nothing. There is always a clicking hard drive, more a ticking sound. It is always possible that an expert could remove the hard drive and recover my data that are valuable photos and videos.

  Thank you

  What model of laptop do you have?
  Try to set the BIOS to default settings and check if the HARD drive is recognized correctly.

• Satellite Pro C660-1NQ does not detect the WLan network

  Hi guys,.

  We have a Toshiba Satellite Pro C660-1NQ here that does not at all, detect the wireless network
  I checked the Device Manager and the wireless card does not show here.

  I tried scanning for new hardware, but nothing was found. I tried to turn the wireless off tension with the function and the keys F8 but not yet showing in Manager devices or any new hardware...

  Any ideas as to what I can try next?

  See you soon,.
  Ash

  Hello

  It seems that the laptop would support the Wlan Atheros 802.11agn card.
  Usually the Atheros Wlan card must appear in Device Manager as on the menu network cards.
  If it s not appear do not then I recommend that you install the WLAN driver which can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
  I hope this helps to detect the WiFi chip!

• Satellite sometimes does not detect the wireless network

  Hello

  My laptop Satellite sometimes does not detect wireless networks and the only thing I can do is to restart my computer, is there a solution for this?

  Hello

  Well, in most cases the WLan driver update could solve this problem.
  In addition its advised to check the firmware of the might of Wlan router must be updated as well.
  I recommend also to reset the settings of the WLan router and set it up again

  Another idea; Disable the save option in Win 7 the power supply WLan management

  Welcome them

• Second SATA hard drive not detected by Bios and Device Manager

  Original title: second SATA hard drive

  Hard drive not detected by the Bios and the device under Vista Home Premiun Manager

  Hi trinitario,.

  Because the hard drive is not detected in the BIOS also, it may be due to a hard drive configuration that should be changed or a rider. If you need to get in touch with a Local tech-store for assistance.

  Note: change in the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is helpful
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite Pro A60 - HARD drive not detected by BIOS

  Hi all!
  I received a Pro (PSA65E) Satellite A60 for free... because it has a bug! But I want to fix it and use it.
  Problem is that the HARD drive is not recognized by the BIOS. Strange enough, it is possible to format during the initial phase of an installation of the OS from scratch (I tried with Win XP and Win 2000), but facilities do not proceed any further because it won't start HD. If I try to install a time shild, he can't find some data already present in the HD and gives warnongs... which means that it is also possible to write to the disk.
  The BIOS screen shows: no drive.
  CD-ROM drive is OK, shown as secondary.
  I also look in the forums to nothing does not.
  Actions taken so far:
  * flashed the BIOS, now at version 1.90
  * Replaced the original HD (Toshiba, 40 GB) known to be good, by another more small (Toshiba, 30 GB)
  * Tried to remove the drive CD and checked BIOS recognizes, it has been removed and recognized it even when delivered. The same manoeuvre with the HD does not change the BIOS screen: he says still 'no drive '.
  * Tried with the BACK of Partition Magic version: it says "no disk found. Same thing with the backup came with the PC disks.
  Tried other stuff found in Fora them: remove all the power sorce, let the PC for a few minutes... open and checked for visible problems in the area of the disc HARD and so on.
  Any suggestion would be appreciated!

  Thank you
  aurcri

  Have you used the default settings for the BIOS settings?

• HP Pavilion p6520y (win7) built-in wireless adapter will not detect ANY wireless network.

  HP Pavilion p6520y Desktop on Windows 7 Home Premium

  Error MESSAGE: "DO NOT CONNECTED - NO CONNECTION IS AVAILABLE" (from the tray icon of wireless with X red network connection).

  No changes to the system, in fact, it's brand new. I just want to use my built-in 802.11n Wireless LAN Card to connect to a network including all other PCs (laptops and desktop computers) can see.

  I tried a lot of things: toggle, adapter, adapter to uninstall/install, driver update (RT3090), PC restore/recovery, reset the router, change the configuration of the card (e.g., power management), all no. AVAIL.

  There is a port of type mini co - ax at the back of the tower for an ANTENNA which came with the PC. However, I think that the internal card could still detect a signal from 20 ft away without antenna. Isn't it?

  PROBLEM SOLVED:

  Of course, the last thing I mentioned was the cause. I have set up the office within inches of the wireless router and a signal (albeit low) was detected.

  So I guess the fixing of an antenna (which should have with my PC) will improve the signal reception when the office is further away (say 20 ft, or more). already checked radio shack with no luck.

  In any case, at least, I know what the problem is. Hope this helps someone in a similar scenario... See you soon...

• dv7-6c21nr pravilion: downloaded windows 7 in pc, should not the ethernet or network controller drivers? Need help please

  I had to get out my laptop with all my files cause I giving it to a friend I got 10 download version inside windows. I removed thinking my previous windows version 7.1 was there, but I guessed wrong. In any case, I contacted Microsoft got windows 7 is a dvd of it and restore laptop well the drivers for the bus network and eithernet controller and device CPI and sm download for me Conect on the internet. Already went to the area of drivers and downloaded the driver for this laptop and installed them and nothing happens. Computer worked great until I deleted windows 10 latter. Could some please help me I don't know what to do anymore.

  Hello:

  There are some missing drivers on the support page, which is probably why you have questions...

  HP never includes the chipset drivers for laptops equipped with AMD processors and chipsets.  Him do not include the well based for their laptops Intel chipset drivers.   Don't ask me why.

  Then... To get the controllers smbus and usb work, you must install the drivers for the chipset directly to AMD.

  You want the first file on the Web page.  Install and reboot the PC.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  The ethernet driver is listed on the support page...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp54998.exe

  The driver for the PCI device (I think that's what you meant to type) is on the support page...

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp54995.exe

  The driver of the wireless adapter is not on the support page, so you need this...

  This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp57001-57500/sp57049.exe

• Pavilion X 2 running as Windows 10 does not detect any WiFi networks

  When starting the Tablet this morning, I received a message "not connected - no connection is available. My home network is up, running and accessible by other devices co-located, including the smartphone with which I'm making this post. Troubleshooting of the Internet connection and the network adapter with Windows Network Diagnostics 3.0 gives "no problems found".
  
  Help? Restore Win 8.1?

  Do not take into account. The Tablet has been at the center of an important Windows Update with no noticeable indication (for me). Detection of network resumed work at the end of the update, and this message is sent on the Tablet already affected. Moral: patience.

• EliteBook 8460p: battery not detected - update Bios?

  Right now my Elitebook running WIN10 and I get a message that says no battery detected.  I read that possibly the BIOS update "might" help with this situation.

  I looked at the details including the suggested site:

  Date of revision of the BIOS - 26/08/2001

  BIOS Rev 68SCF worm. F.08

  Type of processor - Intel Core i5 - 2410 M CPU

  I will be downgrading back to WIN7 PRO and back again to WIN10 as soon as my recovery disks are coming, but I wanted to know what Version of Bios should I download and install.  I want to get this right.

  Hi fkbsar1954,

  If I understand your post of the BIOS on your lapop is currently F.08.  If that is correct, it would be hard to bet that your laptop is at least four years because the BIOS F.08 was released in August 2011. That would mean that there is a high probability of 'no battery detected' error was due to a defective battery, but for troubleshooting of sake, it would be a good step to update the BIOS because there have been 4 separate BIOS releases the correction of different battery problems. What is the recommended version I would recommend that you upgrade to the latest version, F.61, in order to ensure the best possible compatibility with Windows 10 account taken of your system does not officially support Windows 10. F.61 BIOS can be found here:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5056901&swItemId=ob_152511_1&swEnvOid=4060

• Alienware 17 - integrated graphics not detected in BIOS - cannot switch to the integrated graphics card

  As the title says, I own an Alienware 17, bought around November of 2013. My NVidia GeForce GTX 770 M runs like a champ. But I can't go to the integrated graphics card (should be Intel HD Graphics 4600). I tried the Fn + F5 (several times). It is said that it is "optimal". Tried with the laptop plugged in and not plugged. I looked in Device Manager and there is only a single index card (NVidia) view. I then booted the BIOS and it said: 'Integrated Graphics - undetected. " I have the latest BIOS version available on the support Web site.

  Don't know what to do at this point. I should have integrated and discrete, but only discreet is detected. I want to be able to switch to the Intel card, so that I can mess around with things like the Intel WiDi and want to also DO NOT perform my NVidia card all the time, and because I'm not playing games all the time.

  Any ideas? All support staff out there who can help out me?

  Cub... I think I might have answered my own question... My laptop has the option to display 3D 120 Hz. For this reason, 'Optimus' technology is not available (I think I say this right), and so I can't go to the graphics card Intel because of the way the 3D display is wired. There is a YouTube video that I saw what explains the all (link below).

  "Alienware 17 with 120 Hz 3D display has no integrated graphics":

  https://www.YouTube.com/watch?v=RJ3IRvCkllg

  Then... Not sure that I'm too happy with Dell right now. One of the advantages that I looked forward had to be able to change maps and play with some of the features of the Intel WiDi map in particular. When I bought the laptop, I was not made aware that I would lose the functionality of upgrade of the screen to get the 3D option. Would have been nice to know, so that I know what are the trade-offs.