Compaq elite 8300 all in 1: Compaq 8300 allin 1 bought with HARD drive erased

Similar Questions

• Installation of restore in Compaq Presario V2000 after replacing the hard drive disk

  I have a Compaq Presario V2000, I had the hard drive replaced at CompUSA.  The drive is a 250 gig to replace the original HD 40 gig.  When you load the restore of the operating system (Windows XP) disc nothing happens just a note on the ethernet controller and the media test failure then exit ROM PXE.  How to load the operating system.  I follow the procedures on the Web site?

  Thank you very much.  After a discussion at CompUSA, they decided to try another HD concert 160 instead of 250. Wallah... OS began the installation of restore disc program.  It is a problem with the new hard drive.

  Help a what to do CompUSA actually tech the problem finally.

  Thanks again!

• My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  Welcome to the Apple community.

  Locate in iCloud drive in your Finder, drag to where you want to save them on your Mac, confirm, you want to move them when the Finder prompts.

• HP Officejet 7310xi all in one: the HP Officejet 7310xi all-in-One Printer-t - y at - it a hard drive?

  The all-in-one printer HP Officejet 7310xi contains a hard drive?   So if, for the purposes of recycling how to remove or disable otherwise?  Thank you.

  There is no hard drive in the Officejet 7310xi.  Verify that no memory card is inserted in the memory locations in the lower right front side of the machine.

• Presario CQ5110F: COMPAQ Presario CQ5110F adding a second hard drive and...

  Good so I took the lead when writing my original post on how to combine the two computers successfully.
  Not enough research, no question, just a little say aloud... Sorry about that.
  http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/HP-Pavilion-slimline-s3505f-amp-...

  I had little time today messing with both ' puters and discovered...
  They need a good cleaning and had.
  The noise of the Presario is indeed the fan on the radiator, it's just old and tired. Who cannot be strong in a music room; new fan may not be too expensive.
  So I decided the Presario is my starting point.

  I would add the hard drive of the Slimline as slave; they have different connectors tho.

  (1) if I just unplug the V2000 CD reader (that has the straight plugs) and use them to connect the second hard drive will I just lost my CD player? It is very good.
  (2) what parameters of rider (if any) do I need to have on each disc? Do not see outside the car Slimlines.

  I looked closer 2 slots for RAM and noticed that beside them there seems to be 2 places in addition to the Board of Directors, unused with no present holders plastic.

  (3) is it possible to add more slots and double the RAM? I would get 8 + GB and a 64-bit system end by ;~)

  Neither office seems to have the ability to run 2 monitors as is. No problem 29 "should do for now.
  Can't see a way to take the card out of the Slimline wireless and put it in the Presario. Internet not immediately necessary, hard connection cable always an option.

  All the other tips and advice on how to optimize my sytem are also welcome.
  Thank you for your time and helping an old guy handyman.
  See you soon!

  COMPAQ Presario CQ5110F (2008ish)
  Processor AMD Athlon X 2 7550 Dual Core 2.5 GHz = Socket: AM2 +.
  Card mother = Narra5 M2N68 - THE Chipset: NVIDIA GeForce 6150SE nForce 430 Socket: AM2 +.
  Memory RAM = 4 GB RAM DDR2 DIMM PC2-6400 MB/s
  = Video/graphic card nVidia GeForce 6150SE integrated graphics
  Sound/Audio = Audio integrated Realtek ALC888S
  Hard = 320 GB SATA 7200 RPM drive
  CD/DVD Player = DVD +/-R / RW 16 X SuperMulti SATA drive
  OS = Vista Edition Windows Home Premium SP1
  Power = 300w
  Case = Mid size 38cmHx17cmWx43cmL ATX

  Hard drives has no different connectors if they are both SATA specifications like other post indicated.

  There is no adjustment to make on hard disks of the rider SATAS. According to me, that one can think of the old school the IDE drives.

  ) If I just unplug the V2000 CD reader (that has the straight plugs) and use them to connect the second hard drive will I just lost my CD player? It is very good.

  The image below is a diagram for your motherboard. You have enough SATA ports to be used for the second and even a third hard drive.

  

  DDR2 memory modules can be a little difficult to source. The current generation of add-on memory is the DDR3 specification.

  Perform a Google or any search engine is your preference in the memory of the source by using the update of Compaq presario CQ5110F RAM as keywords.

• Compaq presario c795tu model - problem IDE hard drive /disques

  Hello please help me... In my laptop model no presario c795tu, I found some virus a few days ago and I removed it. From here only, my laptop gives error windows repair and SATA / IDE hard disk error.

  Whenever I connect to my laptop. All data are accessible, but it is automatically hidden.

  It gives the error 4 - 5 times this system has a problem in IDE / Sata hard disk. Kindly it reboot and it restarts automatically.

  Please help me how I can solve my problem.

  Diakite says:

  Hello please help me... In my laptop model no presario c795tu, I found some virus a few days ago and I removed it. From here only, my laptop gives error windows repair and SATA / IDE hard disk error.

  Whenever I connect to my laptop. All data are accessible, but it is automatically hidden.

  It gives the error 4 - 5 times this system has a problem in IDE / Sata hard disk. Kindly it reboot and it restarts automatically.

  Please help me how I can solve my problem.

  Press the power button and then press the F10 key to access the BIOS. Run the hard drive Diagnostics. What I saw in my investigation shows it's a 160 GB SATA hard drive.

  There are a few ways that you can use to solve the problem.  You can try the online scanner of ESET.com to remove the offending code or you can try Malwarebytes. MalwareBytes is recommended by some members of the forum, and there is a free version. The ESET online scanner is also free. I prefer the ESET online scanner.

  The simpler but more radical solution would be to make a recovery to factory state using the HP Recovery Manager. You should be able to access the market with the F11 key recovery manager. If this isn't the case, you can use your set of recovery disks. The downside of the HP recovery solution is that you will lose all data and programs you have on your laptop. advantage is that everything works again once you have installed the drivers.

  Best regards
  ERICO

• XPS 8300 - steps to install boot hard drive replacement

  So my original Dell hard drive needs to be replaced because it has been send me errors and it is clearly a failure. If I get a new hard drive, I know how to get into the case and fasten the cables. Should I just turn on the computer with the system recovery disk I created previously? Do I need to 'Drivers and Utilties' disc comes with the computer? I've already invited Dell to the Windows 7 disc, but they never sent (4 years ago). I guess the system recovery disk should be sufficient. For any help or suggestion would be appreciated before I take the plunge.

  Hi Nively,

  Using this recovery disk, you will install the image of hard drive Dell of origin on the new hard drive. So, you will have all the drivers and original applications. Of course, you then need to uninstall all software that you don't want, like for example the MacAfee and install all the updates of Windows.

  Make sure the new drive has the same capacity or greater than your original drive.

• All files and folders show hidden after virus corrupted hard drive XP

  I recently got a virus on my laptop which made all the files and folders hidden and says that my hard drive is damaged. I managed to get rid of the virus, but all my files are always hidden. I went to my computer and made sure all the hidden files are visible. This fixed the problem a bit. My main problem now is that all my files and folders are slightly transparent. It's a more of a nuisance than a real problem. I downloaded a program that would allow me to change each file in groups, but it would take an extremely long time to go by a record throughout my entire computer. I was wondering if there is any means possible to put all my files and folders hidden not Hidden to get rid of their transparency.

  Thanks for any help you can give.

  See this:

  http://www.troublefixers.com/hidden-files-and-folders-are-not-visible/

• All the tools to monitor the temperature of the HARD drive?

  Someone knows any tools to monitor the temperature of the HARD drive? which can be set all of a specific level.  If the temperature is over 50 degrees, it will give any warning.

  Does anyone have any suggestions.

  Thanks in advance for your suggestions

  I'm not sure about the alerts, but I remember using SpeedFan , a long time ago to monitor temperatures.

• need to upgrade 250 GB hard drive, how I transferred all my files and xps3 pro for the new hard drive without lsing all this?

  need to upgrade hdd 250 GB how I transferred all of the files and opperatting sys win xp sp3 new disk hard ad not lose any

  Hello

  You cannot transfer the operating system from one hard disk to another. But you can use the backup utility to backup data and restore it on the new hard drive.

  Reference:
  Install, reinstall, or uninstall Windows
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
  How to use the backup utility to back up files and folders in Windows XP Home Edition
  http://support.Microsoft.com/kb/308422
  How to use the backup utility to back up files and folders in Windows XP Home Edition
  http://support.Microsoft.com/kb/320820
  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
  http://support.Microsoft.com/kb/309340

• How can I get WMP to find all my songs that are stored on an external hard drive?

  I bought an external hard drive to store music for my product and WMP adds only about 30% of the songs to the Player library.  Some are wma and some are in mp3 format (added to the library and which must still be added).  I tried to uncheck Read-only after reading some responses online, but who did not stick and nothing changed.  How can I get WMP to find all my songs?

  I couldn't change them to read-only.  Fortunately after the computer restarts several times it work itself.

  Thanks for all the tips!

• I want to copy all my jpg files to another directory (a portable hard drive) with some of the same names of JPGs, but not necessarily all. What will happen? The word 'COPY', will be some of the deleted files be added or nothing at all.

  I have a LOT of pictures in my computer (over a thousand) and I want to put them on a portable hard drive, I bought (1 terabyte) but I won't write any of the names of existing files with different images. IS THIS POSSIBLE? Do I need software or special hardware? I tried the copy/paste standard as well as move files to the new directory, but it seems that I can lose files. I'm not sure if the files that are missing (or lack, in my opinion) are not copied. When I finished emptying the directory, it shows that it is empty but the new directory does not seem to have any additional files that should be there based on the counting of the files before and after.

  Thanks for any help you can provide, Bill

  1: right-click and then drag the pix on the external drive. Release the right mouse button and choose copy here. They are there?  Now remove it from the computer.

  2: you can see pix of the same name overwrite each other, or be done with (1), (2), etc.. But even in this case, they will be interspersed with the former. If keep you them in separate folders with different names, that should not happen. Personally, I rename all the pix before storing them. You can select the set instead of the code of the camera and a group, rename the first holiday 2009 yo and the rest will be renamed holiday 2009 and each havf will one (1), (2), (3), after them.

  It is also a nice freeware tool which, among other things, can rename a group of photos easily.

  FastStone Image Viewer
  http://www.FastStone.org/

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Get the "Access denied" error when you try to play all video files in another folder on my external hard drive.

  A couple of days, I've had accidentally one of the folders slipped on my hard drive in the folder above him and was presented with the "Access denied" error messages when I tried the two a) reglisser it out & b) open it from the record she had been driven to (which was not a folder of my making that is a jibberish titled folder containing two .vdm files it contains first)

  After receiving advice of a friend, I did a restore from safe mode on the eve of the day when he moved and he did bring him back with all the files and files in the right place, but now I'm getting an access denied for each file, I try to play. Whether Real Player, Windows Media Player etc none will play.

  Just to test, I slipped a .avi file in the folder to see if he was going to play and he did it can be the folder settings, I'm just hoping that all these files are now not corrupted and unplayable as I have some 180 GB of data in this folder in more than 1000 files.

  Any help is very appreciated.
  Kind regards
  Haley

  Hey HRolston,

  What version/service pack of XP are you using?

  What format of your hard drive is formatted to?

  You can check the version/service pack:

  ·         Click Start

  ·         Right click my computer

  ·         Click on Properties

  ·         On the general tab, under System: you will see your information

  For example: Microsoft Windows XP Professional, Version 2002, Service Pack 3

  You can check what is the format of your hard drive is:

  ·         Click Start

  ·         Click on my computer

  ·         Right click on Local disk (c) (or letter that contains your operating system)

  ·         Click on Properties

  ·         On the general tab, next to file system: you will see the format of your hard drive (Fat32 or NTFS)

  Can't wait to hear back on your part.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I want to upgrade Windows XP to 7. If I have all my files copy on a second partition on hard drive, they will remain intact during an installation of Windows 7?

  I want to upgrade XP to 7. My machine got a C: and an onboard hard drive D:. (as well as a lot of CPU power) If I move all critical files on my D: drive, if they are not disturbed during installation of Windows 7 or what must I drag in a remote entity prior to completing the upgrade?

  Also, I have to run 32 bit on my unit which is an installation option?

  Thank you

  original title: Windows 7 upgrade Question

  Hello

  I suggest you to move all of the critical files the D drive that won't cause any disruption during installation of Windows 7, so the installation would take on the C: drive

  Upgrade Windows XP to Windows 7: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-xp-to-windows-7

  Windows 7 Upgrade Advisor: http://windows.microsoft.com/en-US/windows/downloads/upgrade-advisor

  Hope this information is useful.

• How can I move all win xp pro 64-bit programs old internal hard drive to hard drive internal nine win 7 pro 64 bit

  I want to install a new internal hard drive of my computer, my old internal drive is running Win XP Pro 64 bit OS, the new drive will be Win 7 Pro.

  Is there a method much less time to transfer programs from the old drive to the new?

  I have both drives in the same machine to do the transfer. If you have a set of instructions please post them to send me the instructions.

  Thanks in advance

  Sorry, but you can't do that.  When you move from one computer to another, you must reinstall all the programs.  This is because the parts of the program go to different places, and there are updates the registry involved as well.  There are also some activation to worry.  The last time, you can copy programs from one computer to another in the BACK long days long ago.

  Good luck.