COMPAQ EVO D500: 1801 MICROCODE PATCH ERROR

Similar Questions

• 1801 - Microcode Patch error after upgrading D310v EVO 1.7 GHz Celeron processor Celeron 2.8 GHz

  I replaced my processor, as described and on startup, I get the "1801 - Microcode Patch error...". "mssg telling me to 'contact' Compaq for a new ROM BIOS to take in charge the new stepping. I have to push 'F1' at startup, then it starts and runs significantly faster than before the upgrade. I found the BIOS upgrades to the HP site but I cannot know which is correct. I've tried a couple and nothing happened after downloading; How will I know which is the right one, how to throw, etc? Can damage my computer if I run that badly?

  Hello:

  I'm sure that a Pentium 4 processor 2.8/533/512 will work fine with your current configuration to 95%.

  Certainly better than celery.  I even think that the P4 2.4/533/512 would be better than celery 2.8.

  But go for the P4 2.8. They should be cheap and abundant.

  Just check you get one with the FSB 533 and 512 KB of L2, FSB 800 or 1 MB L2 cache cache, or it won't work.

  It's one you need - and the cheapest I could find - buy - it now.

  http://www.eBay.com/ITM/SL6PF-2-80-GHz-Intel-Pentium-4-processor-CPU-478-pin-/330678567620?PT=CPUs&hash=item4cfdfa82c4

  Paul

• 1801 - Microcode Patch error

  I've updated my Pentium 4 processor, 1500 MHz for Pentium 4, 2400 MHz.  Now, I get the following error on POST.

  1801: Microcode Patch error.  Missing or invalid processor Microcode patch.  Please contact Compaq Computer Corporation for a new ROM BIOS to support the new stepping.

  How to solve this?  I don't find any update of the Compaq BIOS at this address:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=us&lang=en&product=405364

  You can try this update if you have not already... otherwise I think you're the GROUND.
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=37580&LC=en&DLC=en&cc=us&product=92873&OS=228&lang=en

• Change processor, 1801 - Microcode Patch error.

  Hello world

  I changed the processor on my HP SFF 4000 (decommissioning the core 2 duo E7500 to a core 2 duo E6300, I need the E7500 in another computer) and I get this nasty 1801 - Microcode Patch error.

  I can't get into the bios, or do anything.

  I can press F1 to jump, then computers goes to windows but switches off the power in an emergency a minute later.

  I guess I can have Flash my bios, but if someone can lead me to detailed instructions and a download link to a bios that supports the E6300 for my SFF 4000, I would be really grateful!

  Thanks in advance!

  Hello:

  You will live by pressing F1 to continue or install a supported processor.

  There are no updates BIOS or firmware updates that will add support for the E6300 processor in your PC.

  Here is the list of processors supported, that you can choose.

  HP Compaq 4000 Pro Series

  Standard features and configurable components (availability may vary depending on country)

  Intel Celeron processors

  Intel Celeron E3300 processor

  2.50 GHz, 1 MB, 800 MHz FSB L2 cache

  Processor Intel Celeron E3500

  2.70 GHz, 1 MB, 800 MHz FSB L2 cache

  Intel Pentium processors:

  Processor Intel Pentium E5700

  3.0 GHz, cache L2 2 MB, 800 MHz FSB

  Processor Intel Pentium E5800

  3.20 GHz, cache L2 2 MB, 800 MHz FSB

  Intel Pentium E6700 processor

  3.20 GHz, cache L2 2 MB, FSB 1066 MHz

  Processor Intel Pentium E6800

  3.33 GHz, cache L2 2 MB, FSB 1066 MHz

  Intel Core 2 Duo processors

  Intel Core 2 Duo E7500 processor

  2.93 GHz, cache 3 MB L2, FSB to 1066 MHz

  Intel Core 2 Duo E7600 processor

  3.06 GHz, cache 3 MB L2, FSB to 1066 MHz

  Intel Core 2 Duo E8400 processor

  3.0 GHz, cache 6 MB L2, 1333 MHz FSB

  Intel Core 2 Duo E8500 processor

  3.16 GHz, cache 6 MB L2, 1333 MHz FSB

  Intel Core 2 Duo E8600 processor

  3.33 GHz, cache 6 MB L2, 1333 MHz FSB

  Intel Core 2 Quad Processors

  Intel Core 2 Quad Q8400 processor

  2.66 GHz, 1333 MHz FSB, 4 MB L2 cache

  Intel Core 2 Quad Processors

  Processor Intel Core 2 Quad Q8400s

  2.66 GHz, 4 MB L2 cache, 1333 MHz FSB, 95W TDP

  I saw the BIOS release notes, and only also supports processor Q8400s.  No other processor support has been added.

  Paul

• HP Compaq dc7700p: how to fix '1801 Microcode Update error' HP Compaq dc7700p Convertible Minitowers

  Hello

  I read and read this post for a few times and I'm not sure it will work on my PC so I have to ask, how to solve '1801 Microcode Update error' in HP Compaq dc7700p Convertible Minitowers I upgraded it with E7200 instead of the original E6300

  Here is the product number: p/n RN120ET #UUZ

  I am in a position to start and start windows, I don't know is that it works normally or not, I'm just bored with the startup message:

  Please HELP and thank you in advance!

  Hello:

  You must upgrade the BIOS to version to get rid of the error of microcode, and processor at half the speed of the FSB only works because the update of the BIOS was not written for the E7xxx processors work correctly.

  You will need to run this software whenever you enter windows and change the multiplier up.

  Or you can run this batch file listed on the bottom of Web page so that it runs automatically.

  http://CrystalMark.info/software/CrystalCPUID/index-e.html

  If I were you, I just install an E6700 Conroe and have an update without problem.

  You will need to use the BACK base flash because I don't think that there is an update of the BIOS written for W7.

• How to solve '1801 Microcode Update error' in HP Compaq dc7800 Convertible Minitowers

  I have Intel Core 2 Duo 2.93 GHz. My operating system is Windows 7 Ultimate x 64.

  Hello:

  The E7500 processor is not supported in the dc7800, reason why you get the error of microcode.

  Here is the list of supported processors.

  Intel Core 2 Duo processors:

  Processor Intel Core 2 Duo E4500 (2.20 GHz, 2 MB L2 cache, 800 MHz FSB)

  Processor Intel Core 2 Duo E4600 (2.40 GHz, 2 MB L2 cache, 800 MHz FSB)

  Processor Intel Core 2 Duo E4700 (2.6 GHz, 2 MB L2 cache, 800 MHz FSB)

  Processor Intel Core 2 Duo E6550 (2.33 GHz, 4 MB L2 cache, 1333 MHz FSB)

  Processor Intel Core 2 Duo E6750 (2.66 GHz, 4 MB L2 cache, 1333 MHz FSB)

  Processor Intel Core 2 Duo E6850 (3.0 GHz, 4 MB L2 cache, 1333 MHz FSB)

  Processor Intel Core 2 Duo E7200 (2.53 GHz, 3 MB cache L2, FSB to 1066 MHz)

  Processor Intel Core 2 Duo E7300 (2.66 GHz, 1066 MHz FSB, L2 cache 3 MB)

  Processor Intel Core 2 Duo E8200 (2.66 GHz, 6 MB L2 cache, 1333 MHz FSB)

  Processor Intel Core 2 Duo E8300 (2.83 GHz, 6 MB L2 cache, 1333 MHz FSB)

  Processor Intel Core 2 Duo E8400 (3.00 GHz, 6 MB L2 cache, 1333 MHz FSB)

  Processor Intel Core 2 Duo E8500 (3.16 GHz, 6 MB L2 cache, 1333 MHz FSB)

  Inter Processor Core 2 Duo E8600 (3.33 GHz, 6 MB L2 Cache, bus front end to 1 333 MHz)

  As a long shot, you can try to install the latest firmware update. You must use a bootable USB key with back files in order to run the flashbin.exe command after copying the microcode update files in your USB drive bootable.

  I can't support dc7800 site. When you can, choose the 2010 v1.14 firmware update download

  If you are unfamiliar with how to make a bootable flash drive, this is a good 'how' of the article with the files you need.

  http://www.techpowerup.com/forums/showthread.php?t=47812

  Paul

• Compaq dc5800: 1801 H.P. Microcode update error; message at startup

  I bought this computer used as what a year ago, whenever I start it, I get this message "1801 microcode update error H.P.. Can anyone suggest me how I can remeady this situation. Thank you.

  Croft, welcome to the forum.

  What is the style of the computer, format microtour or Small Form Factor?

  Results for "compaq dc5800" (6 products)

• Compaq Evo graphics card question

  Hello

  Recently we gave me a Compaq Evo D500 or D510 CMT opportunity, not sure which, but it looks like this: http://www.computronicsdistribution.com/images/Compaq_Evo_D510_Tower.jpg

  I wanted to update the video card which is the following: http://cdn3.ioffer.com/img/item/104/527/401/VDve.jpg

  for maybe a 32 MB card. The computer is currently the operating system Windows 2000 w / SP4 installed.

  The reason for the upgrade is that I tried to install games on it for my mother to play and it seems most have compatibility issues. I guess it's the video card or drivers (I have drivers installed already). I thought it would be a sure way to make all the games to play correctly. The computer is pretty much only used for these games and is not yet online. Any help would be useful.

  Thank you

  Eric

  It's an old AGP card that can run in a slot 3.3 v or 1.5 v and I saw that the motherboard is a 1.5V AGP slot, so pretty much any AGP card will work. If you have any type MOM computer stores and pop in your town I would go to one and ask them if they have an old school used AGP cards. You could switch to something like a card GeForce2 or GeForce3, which should cost only a few bucks now.

  Here are 2 ebay auction for what I'm talking about:

  eBay

  eBay 2

  It would also be useful to know what games you are talking about. They have specific minimum specifications. I might also suggest that the upgrade to Windows XP would be a good idea. Windows 2000 was not a good gaming platform and Windows Xp handles much better 3D graphics.

• HP dc5700 sff: 1801 microcode error

  I have HP Compaq DC5700 Small factor, I changed it "Intel Core 2 Duo 1.83 GHz e6300" CPU to "Intel Core 2 Duo e7200 2.53 GHz.

  When the ups system is initialized, it gives an error about"1801, processor microcode update, error... »,

  Also in the information system of F10 it doesn't show the correct information on the CPU.

  Windows 7 computer temptation see the processor: Intel Core 2 Duo CPU E7200 @ 2.53 GHz 1.60 GHz.

  The BIOS version and the date is: Hewlett-Packard 786E2 v020.9, November 10, 11.

  You are the very welcome.

  If you do what I wrote above, your PC will work fine and normal scoring of the processor.

  No firmware errors, no problem.

  There are, and will never have any official fix to the problem.

  Intel says the E7xxx processors are not at all based on the 965 chipset, and HP has refused to fix the problem of BIOS where the processor only runs at 1/2 speed.

  But as I wrote yesterday, I posted the utility will fix the problem of the speed of 1/2.

  If you enter these commands as they have suggested at the bottom of the Web page to make the program starts automatically after windows loads, you won't even have to worry either.

• Compaq Evo D5pM - problems using this model number, never find what he listed...

  Compaq Evo D5pM - (Pent4 - 1.7 GHz) problems using this model looking for parts or information number.  Serial number has not been useful.

  Someone said "aka Compaq D510." Trying to buy memory model (found on the case) my number wasn't so I tried to use D510 (it was listed). Apparently not the same computer / mine use 168 pins sticks and D - 510 came 188 pins. I did my 'upgrade' purchase by check the number of pins and using the already installed type.

  My computer is a vertical minitower - looks like D - 510-, but like I said the components are different.

  I was wondering if anyone knows a model Compaq Evo w / same components (P4 1.7 GHz; 168 pin memory) I could use for research purposes. The smallest horizontal model Evo often uses different (smaller) maps, etc..

  Tried the Ctrl-Alt-S keyboard shortcut to bring up the model number (etc.), but my keyboard shortcuts do not work on this computer. Run a search for edge came up with nothing to tune.

  I tried HP support and drivers.  With the help of several model numbers and found that absolutely nothing for HP Compaq or "Compaq" is in the list.

  It is a great 3rd computer that I've updated w / spare parts, use it remotely, especially for music. Only problem was the dark model number. If anyone has something useful to add would be most appreciated. Thanks in advance...

  PS I'm currently trying to identify MB for what it's worth, but a number of alternative model that works would be great.

  Hello:

  Your model is a d500 CMT HP.

  1 GB 128 x 64-133 MHz PC133, 168P DIMM, 3.3V, sync

  Type of memory: , (non - ECC)
  Maximum memory: 3 GB
  Slots: 3

  This is the page for support and drivers for your PC.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/home/?cc=us & lang = in & sp4ts. OID = 96294 & Task = & AC.admitted = 1389381517647.876444892.199480143

  QuickSpecs:

  http://h18000.www1.HP.com/products/QuickSpecs/productbulletin.html#spectype=North_America & type = HTML & docid = 10946

  Because nobody does more than the memory, it will be hard to find and very expensive.

  You can plan on paying more $ $70 / 1 GB chip if you do not find the specification above used on a place like eBay.

  You can buy a newer, faster CMT from HP on eBay for less than $70 delivered.  Memory is much cheaper to buy as well.

  http://www.eBay.com/ITM/HP-DC7600-Pentium-4-3-0GHz-40Gb-512MB-DVDRW-XPPRO-30-day-warranty-/281231108334?PT=Desktop_PCs & Hash = item417aae28ee

• Compaq Evo Notebook - hard drive problem

  Hi eveyone,

  I bought a Compaq Evo Notebook online on eBay two years ago. Yesterday, I went to use it on and got an error of the controller. So I moved the computer and noticed the my cat peeded and he went under the computer and go to some of them in the area of the hard drive. I quickly turned it off and took apart and gently he cleaned with wet towels and let rest overnight with dehumidifiers. I then put together around noon and the computer will not start past the compaq logo, but when I took out the hard drive and tried to see if it would start past the logo, what he did and when I put a CD/OS-Ubuntu and it went to the operating system install screen (since it has an option from the CD). Anyone know what I can do to be able to at least install Ubuntu, rather than start from the CD or recover windows XP.

  Thanks for any help provided.

  Andy

  It seems that the hard drive has been damaged by the cat wee, you can buy a usb hard drive adapter and connect it to another PC, see if it will be displayed in the Solution Explorer, if it copies your files off quickly.

• Compaq Evo D300: Multimedia Audio controller drivers/Codecs

  Compaq IT support/Codec.

  Dear community of Compaq.

  I was informed by the Intel online community to contact Compaq for Codecs that are not themselves. Can you please help me by providing the necessary driver/Codec below?

  The Intel answer/advice for me and my original question which is lower. Thank you very much.
  Mr. Bennett

  Intel community advice

  "The device that you identified is the Intel high definition Audio interface. The driver you need really need is not for the interface itself, but for the media Codec that completes the circuit. Intel cannot help you with that. they do not have these Codecs. You must contact the Board vendor for the correct driver. »

  My original Question from Intel

  "Dear community.
  Can someone help me find a driver "Multimedia Audio Controller" for the "Compaq Evo D300" PC?
  Exact model: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=92161 & lang = to & cc = us
  "077Ch" is the main map.
  Company and feature:
  VEN 8086
  DEV 2445
  I've upgraded to Windows 7 from XP but I think that Intel don't do drivers more for this PC.
  I would be very grateful for help.
  Thank you.

  Mr. Bennett"

  Thank you.

  Mr O Bennett

  You are the very welcome.

  I mean, it is explore you the file and select with the mouse, then click Next and it should install the driver

  You cannot copy and paste anything.

  You can first try this method easier to install the driver...

  When you arrive at her browse my computer for driver software option, go to: C:\SWSetup\sp27103, make sure that the include subfolders is selected and see if the pilot goes like this.

  The original file that I gave my instructions has the hardware ID you posted, so you need to install the driver (8086-2445)

  [AnalogDevices]
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00070E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00080E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00090E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000B0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000C0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000D0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000E0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000F0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00100E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00880E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00890E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008B0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008C0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008D0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A50E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A60E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A70E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_SPINNA, PCI VEN_8086 & dev_2445 & subsys_000A0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_SPIDER, PCI VEN_8086 & dev_2445 & subsys_008A0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_124C103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_80101043
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_890D1509
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICH_H, PCI VEN_8086 & dev_2445 & subsys_1274103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_126E103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_126F103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_1279103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_127A103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_AMAZON, PCI VEN_8086 & dev_2445 & subsys_806A1043
  % * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_3084109F
  % * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_3181109F
  % * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_80761043

• Network for Compaq Evo D51C Windows 7 driver

  I'm looking for a network driver for a Compaq EVO D51C running Windows 7. Any help would be appreciated.

  Hello:

  Someone added an ethernet card in your machine...

  Download and manually install this driver.  The first on the list.

  Hit the Green click to the download button, and then it takes several seconds to load.

  http://www.Atheros.cz/Atheros-network-download.php?chipset=50&system=5

• Old Compaq Evo N1020V, replace the hard drive on the SSD

  Hello
  I wanted to extend the life of my old Compaq Evo N1020V Intel P4. I bought a Transcend SSD TS32GSSD25-m, connected to the computer, I have updated the BIOS to the latest version available F.0B January 24, 2007. Unfortunately, when the computer starts the message: 0200: failure fixed disk 0
  Is it possible to connect the SSD drive to the old computer?

  I see that now.

  You initialize the drive using the FDISK utility? If it is not initialized it would not even necessarily considered gift.

  Installation of an operating system on an SSD, this isn't the same as it is with an electromagnetic drive legacy.  It is a little involved with an old SSD OCZ Vertex and enough conversely simple with a Corsair SSD upgrade kit. I own both. The upgrade of the Corsair was as simple as with the SATA supplied to the usb connector and software cloning with that also it was delivered.

  To do a bit of research I saw that there is not much in material information facility available on the web for this particular SSD. Maybe the transcend technical support would have been a better place to look for info on the installation. Transcend would have supported their product. The post that is marked as the solution is not correct. It is as you say a disc SSD PATA. It must have worked. the problem seems to be more a problem installation or a failing Transcend SSD drive. return the drive for a replacement and try again.

  Best regards
  ERICO

• Recovery of Compaq Evo N610v

  Compaq Evo N610v

  She is a hot RECOVERY key?
  Which one?

  If in case he doesn't have this feature, is an available recovery disk?
  Available for download?
  Or buy?

  Thank you.

  This web document describes all the recovery options available for the EVO N610V.

  The age of the laptop EVO N610V makes very little probable that you will be able to find recovery discs. I found a seller that sells laptop recovery disks. Do a Google or Bing search to find the game of recovery Compaq EVO N610V diskettes.

  You would be better using a Windows XP installation disk and do a clean install of the operating system if the license activation key 25 characters is always visible on the sticker attached to the bottom of the laptop. After eight years he is perhaps more visible, unless someone put on transparent tape.

  You can get all the drivers from here. http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=316666&prodTypeId=321957&prodSeriesId=316664&swLang=8&TaskID=135&swEnvOID=1093