Compaq Evo D5pM - problems using this model number, never find what he listed...
Compaq Evo D5pM - (Pent4 - 1.7 GHz) problems using this model looking for parts or information number. Serial number has not been useful.
Someone said "aka Compaq D510." Trying to buy memory model (found on the case) my number wasn't so I tried to use D510 (it was listed). Apparently not the same computer / mine use 168 pins sticks and D - 510 came 188 pins. I did my 'upgrade' purchase by check the number of pins and using the already installed type.
My computer is a vertical minitower - looks like D - 510-, but like I said the components are different.
I was wondering if anyone knows a model Compaq Evo w / same components (P4 1.7 GHz; 168 pin memory) I could use for research purposes. The smallest horizontal model Evo often uses different (smaller) maps, etc..
Tried the Ctrl-Alt-S keyboard shortcut to bring up the model number (etc.), but my keyboard shortcuts do not work on this computer. Run a search for edge came up with nothing to tune.
I tried HP support and drivers. With the help of several model numbers and found that absolutely nothing for HP Compaq or "Compaq" is in the list.
It is a great 3rd computer that I've updated w / spare parts, use it remotely, especially for music. Only problem was the dark model number. If anyone has something useful to add would be most appreciated. Thanks in advance...
PS I'm currently trying to identify MB for what it's worth, but a number of alternative model that works would be great.
Hello:
Your model is a d500 CMT HP.
1 GB 128 x 64-133 MHz PC133, 168P DIMM, 3.3V, sync
Type of memory: , (non - ECC)
Maximum memory: 3 GB
Slots: 3
This is the page for support and drivers for your PC.
QuickSpecs:
Because nobody does more than the memory, it will be hard to find and very expensive.
You can plan on paying more $ $70 / 1 GB chip if you do not find the specification above used on a place like eBay.
You can buy a newer, faster CMT from HP on eBay for less than $70 delivered. Memory is much cheaper to buy as well.
Tags: HP Desktops
Similar Questions
-
How and where can I find my Macbook Pro using the model number
How and where can I find my Macbook Pro "using the MODEL number" NOT the serial NUMBER please...
Hello world:
I would like to know more about my MacbookPro using model # is if there is a website or a program that I can type my model # so she'll tell me more on my computer...?
-
I created a Newsletter in Dreamweaver. I want to now the sales team to use this model in emails it. What is my next step?
I understand that when I open the html file in a browser, I can easily do a select all, copy and then paste into the body of the email. But if I explain that to the sales team, I am sure that a few of them go wrong select it and the email will get all messed up. This isn't a good solution.
I need to find an easy way for them to be able to implement this in email here. I've heard of the file called FTO that outlook uses to import these models of OTF, but not all the guys in sales use outlook.
Please help, any suggestions?
Thank you!!!
I would never recommend allowing HTML emails to be sent from Outlook. Have you considered investing in an email marketing or marketing automation solution? For a newsletter in particular, the quantity of reports and an overview of these solutions, you can collect is invaluable. If you use one of these tools, you can insert a record or sometimes attach to a CRM SYSTEM like Salesforce and make it look like the representative signed it. Some examples of different solutions:
Email marketing
-Mailchimp - http://mailchimp.com
-Constant contact - Email Marketing Software | Contact
Marketing Automation
-Eloqua - http://www.eloqua.com
-Marketo - http://www.marketo.com
-Adobe Marketing Cloud - digital marketing integrated platform | Cloud Marketing Adobe
-
I'm unable to empty a jpg of the Trash because the element is used. How can I find what is using the element?
option of command, escape on the keyboard and then on the force quit button for all applications listed
then empty the trash
-
Performance-to-many problem (using the model of the FAQ)
After reading "HOW TO: post a request for tuning SQL - model showing statement" I gathered:
I have included some general information at the bottom of the post
The following SQL statement has been identified as a bad performance. It takes ~ 160 seconds to run, but similar (indicated below first statement) SQL statements run in ~ 1 second.
SQL taking 160 seconds:
SQL in ~ 1 second or lessSELECT a.* FROM table_a a INNER JOIN table_a_b ab ON a.id = ab.media_fk WHERE ab.channel_fk IN (7, 1);
Or:... ab.channel_fk IN (7);
The purpose of the SQL is to return lines from table_a associated table_b (not in SQL) through the junction table table_a_b.... ab.channel_fk IN (6, 9, 170, 89);
The version of the database is 10.2.0.4.0
These are the parameters relevant for the optimizer:
Here is the output of the EXPLAIN PLAN of:show parameter optimizer; NAME TYPE VALUE -------------------------------------------------- ----------- ----------------------------------------- optimizer_dynamic_sampling integer 2 optimizer_features_enable string 10.2.0.4 optimizer_index_caching integer 0 optimizer_index_cost_adj integer 100 optimizer_mode string ALL_ROWS optimizer_secure_view_merging boolean TRUE show parameter db_file_multi; NAME TYPE VALUE -------------------------------------------------- ----------- ----------------------------------------- db_file_multiblock_read_count integer 16 show parameter db_block_size; NAME TYPE VALUE -------------------------------------------------- ----------- ----------------------------------------- db_file_multiblock_read_count integer 16 select sname, pname, pval1, pval2 from sys.aux_stats$; SNAME PNAME PVAL1 PVAL2 ------------------------------ ------------------------------ ---------------------- ------------------- SYSSTATS_INFO STATUS COMPLETED SYSSTATS_INFO DSTART 07-18-2006 23:19 SYSSTATS_INFO DSTOP 07-25-2006 23:19 SYSSTATS_INFO FLAGS 0 SYSSTATS_MAIN SREADTIM 5.918 SYSSTATS_MAIN MREADTIM 7.889 SYSSTATS_MAIN CPUSPEED 1383 SYSSTATS_MAIN MBRC 8 SYSSTATS_MAIN MAXTHR 1457152 SYSSTATS_MAIN SLAVETHR -1
For reference, the EXPLAIN PLAN when usingPLAN_TABLE_OUTPUT Plan hash value: 3781163428 ---------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time | ---------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1352K| 771M| | 60042 (3)| 00:05:56 | |* 1 | HASH JOIN | | 1352K| 771M| 27M| 60042 (3)| 00:05:56 | |* 2 | INDEX FAST FULL SCAN| SYS_IOT_TOP_316310 | 1352K| 11M| | 1816 (4)| 00:00:11 | | 3 | TABLE ACCESS FULL | TABLE_A | 2190K| 1230M| | 32357 (4)| 00:03:12 | ---------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - access(""AB"".""MEDIA_FK""=""A"".""ID"") 2 - filter(""AB"".""CHANNEL_FK""=1 OR ""AB"".""CHANNEL_FK""=7) Note ----- - 'PLAN_TABLE' is old version
that runs in ~ 1 second is:... ab.channel_fk IN (6, 9, 170, 89);
Here is the output of SQL * Plus AUTOTRACE, including CALENDAR information:PLAN_TABLE_OUTPUT Plan hash value: 794334170 ---------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time | ---------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 143K| 81M| | 58982 (3)| 00:05:50 | |* 1 | HASH JOIN | | 143K| 81M| 2952K| 58982 (3)| 00:05:50 | | 2 | INLIST ITERATOR | | | | | | | |* 3 | INDEX RANGE SCAN| C_M_INDEX | 143K| 1262K| | 1264 (1)| 00:00:08 | | 4 | TABLE ACCESS FULL| TABLE_A | 2190K| 1230M| | 32357 (4)| 00:03:12 | ---------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - access(""AB"".""MEDIA_FK""=""A"".""ID"") 3 - access(""AB"".""CHANNEL_FK""=6 OR ""AB"".""CHANNEL_FK""=9 OR ""AB"".""CHANNEL_FK""=89 OR ""AB"".""CHANNEL_FK""=170) Note ----- - 'PLAN_TABLE' is old version
The TKPROF output for that statement looks like the following:SQL> set autotrace traceonly arraysize 100; SQL> SELECT 2 a.* 3 FROM 4 table_a a 5 INNER JOIN table_a_b ab ON a.id = ab.media_fk 6 WHERE 7 ab.channel_fk IN (7, 1); 1336148 rows selected. Execution Plan ---------------------------------------------------------- Plan hash value: 3781163428 ---------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time | ---------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1352K| 771M| | 60042 (3)| 00:05:56 | |* 1 | HASH JOIN | | 1352K| 771M| 27M| 60042 (3)| 00:05:56 | |* 2 | INDEX FAST FULL SCAN| SYS_IOT_TOP_316310 | 1352K| 11M| | 1816 (4)| 00:00:11 | | 3 | TABLE ACCESS FULL | TABLE_A | 2190K| 1230M| | 32357 (4)| 00:03:12 | ---------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - access("AB"."MEDIA_FK"="A"."ID") 2 - filter("AB"."CHANNEL_FK"=1 OR "AB"."CHANNEL_FK"=7) Note ----- - 'PLAN_TABLE' is old version Statistics ---------------------------------------------------------- 10586 recursive calls 0 db block gets 200457 consistent gets 408343 physical reads 0 redo size 498740848 bytes sent via SQL*Net to client 147371 bytes received via SQL*Net from client 13363 SQL*Net roundtrips to/from client 49 sorts (memory) 0 sorts (disk) 1336148 rows processed
DBMS_XPLAN. Output DISPLAY_CURSOR:TKPROF: Release 10.2.0.4.0 - Production on Mon Oct 1 12:23:21 2012 Copyright (c) 1982, 2007, Oracle. All rights reserved. Trace file: ..._ora_4896.trc Sort options: default ******************************************************************************** count = number of times OCI procedure was executed cpu = cpu time in seconds executing elapsed = elapsed time in seconds executing disk = number of physical reads of buffers from disk query = number of buffers gotten for consistent read current = number of buffers gotten in current mode (usually for update) rows = number of rows processed by the fetch or execute call ******************************************************************************** ALTER SYSTEM SET TIMED_STATISTICS = TRUE call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 1 0.00 0.00 0 0 0 0 Execute 1 0.00 0.03 0 0 0 0 Fetch 0 0.00 0.00 0 0 0 0 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 2 0.00 0.03 0 0 0 0 Misses in library cache during parse: 0 Parsing user id: 21 ******************************************************************************** SELECT a.* FROM table_a a INNER JOIN table_a_b ab ON a.id = ab.media_fk WHERE ab.channel_fk IN (7, 1) call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 1 0.01 0.00 0 0 0 0 Execute 1 0.00 0.00 0 0 0 0 Fetch 2 27.23 163.57 179906 198394 0 16 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 4 27.25 163.58 179906 198394 0 16 Misses in library cache during parse: 1 Optimizer mode: ALL_ROWS Parsing user id: 21 ******************************************************************************** OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 2 0.01 0.00 0 0 0 0 Execute 2 0.00 0.03 0 0 0 0 Fetch 2 27.23 163.57 179906 198394 0 16 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 6 27.25 163.62 179906 198394 0 16 Misses in library cache during parse: 1 OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 0 0.00 0.00 0 0 0 0 Execute 0 0.00 0.00 0 0 0 0 Fetch 0 0.00 0.00 0 0 0 0 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 0 0.00 0.00 0 0 0 0 Misses in library cache during parse: 0 2 user SQL statements in session. 0 internal SQL statements in session. 2 SQL statements in session. ******************************************************************************** Trace file: ..._ora_4896.trc Trace file compatibility: 10.01.00 Sort options: default 1 session in tracefile. 2 user SQL statements in trace file. 0 internal SQL statements in trace file. 2 SQL statements in trace file. 2 unique SQL statements in trace file. 46 lines in trace file. 187 elapsed seconds in trace file.
Thank you for reading I'm waiting for suggestions to improve the performance of this statement.select * from table(dbms_xplan.display_cursor('474frsqbc1n4d', null, 'ALLSTATS LAST')); PLAN_TABLE_OUTPUT SQL_ID 474frsqbc1n4d, child number 0 ------------------------------------- SELECT /*+ gather_plan_statistics */ c.* FROM table_a c INNER JOIN table_a_b ab ON c.id = ab.media_fk WHERE ab.channel_fk IN (7, 1) Plan hash value: 3781163428 --------------------------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads | Writes | OMem | 1Mem | Used-Mem | --------------------------------------------------------------------------------------------------------------------------------------------------- |* 1 | HASH JOIN | | 1 | 1352K| 1050 |00:00:40.93 | 198K| 182K| 209K| 29M| 5266K| 3320K (1)| |* 2 | INDEX FAST FULL SCAN| SYS_IOT_TOP_316310 | 1 | 1352K| 1336K|00:00:01.34 | 10874 | 0 | 0 | | | | | 3 | TABLE ACCESS FULL | TABLE_A | 1 | 2190K| 2267K|00:02:45.56 | 187K| 182K| 0 | | | | --------------------------------------------------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - access(""AB"".""MEDIA_FK""=""C"".""ID"") 2 - filter((""AB"".""CHANNEL_FK""=1 OR ""AB"".""CHANNEL_FK""=7))
-----
H3. Backgroud
There are many years my company made decided to maintain many-to-many relationships in our database using pipe delimited fields. An example of field value:
Each delimited value refers to a unique "short" code TABLE_B (there is also a real digital foreign key to TABLE_B, which is what I use in the junction table). We are regularly using these columns with the next SQL style:'|ABC|XYZ|VTR|DVD|'
Appropriate indexes have been created over the years to make this process as soon a possible.... WHERE INSTR(pipedcolumn, '|ABC|') > 0 OR INSTR(pipedcolumn, '|XYZ|' > 0 ...
We now have an opportunity to correct some of these errors of design and implementation of junction tables to replace the current field. Before that, we have decided to take a copy of a database to a client with the largest set of records and test. I created a new junction table:
And the analysis on a pipe delimited field, populated by this new table.TABLE_A_B DDL: CREATE TABLE TABLE_A_B ( media_fk NUMBER, channel_fk NUMBER, PRIMARY KEY (media_fk, channel_fk), FOREIGN KEY (media_fk) REFERENCES TABLE_A (ID), FOREIGN KEY (channel_fk) REFERENCES TABLE_B (ID) ) ORGANIZATION INDEX COMPRESS; CREATE INDEX C_M_INDEX ON TABLE_A_B (channel_fk, media_fk) COMPRESS;
I then compared the performance of the following SQL:
When x, y, n are values that occur less frequently in the TABLE_A_B.CHANNEL_FK performance are comparable. However once the frequency of x, y, n increases, performance suffers. Here is a summary of the data CHANNEL_FK in TABLE_A_B:SELECT a.* FROM table_a a INNER JOIN table_a_b ab ON a.id = ab.media_fk WHERE ab.channel_fk IN (x, y, n); -- Can be Many Minutes --vs. SELECT a.* FROM table_a a WHERE INSTR(OWNERS,'|x|') >0 OR INSTR(OWNERS,'|y|') >0 OR INSTR(OWNERS,'|n|') >0; -- About 1 second seemingly regardless
I noticed that whenever I use any combination of values that occur over approximately 800 000 times (i.e. IN (7, 1) = 780741 + 555407 = 1336148) then I get performance problems.--SQL For Summary Data SELECT channel_fk, count(channel_fk) FROM table_a_b GROUP BY channel_fk ORDER BY COUNT(channel_fk) DESC; CHANNEL_FK COUNT(CHANNEL_FK) ---------------------- ---------------------- 7 780741 1 555407 2 422493 3 189493 169 144663 9 79457 6 53051 171 28401 170 19857 49 12603 ...
I find it very difficult to accept that the old pipe delimited fields are a better solution (without taking into account any other than this search criterion!).
Thank you for reading this far. I really look forward to suggestions on how to improve the performance of this statement.
Published by: user1950227 on October 1, 2012 12:06
Table of link renamed in DDL.davebcast wrote:
The following SQL statement has been identified as a bad performance. It takes ~ 160 seconds to run, but similar (indicated below first statement) SQL statements run in ~ 1 second.
Keep in mind that the enforcement timeframe has elapsed is a poor metric to use for benchmarking of SQL. The reason is that the same workload does not mean that the same elapsed execution time.
The workload for example shows a block of 1000 readings. There will be a difference marked by this workload reading data of the slow physical disks, or making this workload by reading data from memory in memory cache. And if it happens to be in memory or on disk is a kind of "random" thing (depends on many environment and factors of execution).
Thus, rather than measure the elapsed time and use it to compare, rather compare actual workloads. A workload of 500 block reading is faster and better than a block of 1000 DSL - despite the fact that a point of elapsed time can show the 500 read being slow (e/s physical) block a block of 1000 to read (e/s logic).
-
Beginner problem: using the model and cannot see in design or split
I put in place a model, he opened and saved as a html file. I don't see anything except in code view. Split and design view just shows a grey area with yellow outline and yellow tab with the words, "template: newbasic1". "newbasic" is the name of the template that I created.
I was able to do all my work in code view and it checks all the as valid and works. But I would like to be able to work in split view. I have no idea what I did to create this problem.
You can see the problem pages (all pages in the site have this problem) to:
Any suggestions much appreciated.
It is completely invalid code and is the reason why you don't see what in DW Design view - simply may not know what to do with your markup.
1. you can't have an editable region in the
tag. That's why DW will not allow you to do this via the user interface.2. you do not close the tag body the way you have. It is closed here-
-
I've had 8 first almost 2 months now and have never been able to use it and give up in despair.
I saw a few demo videos on the basics on how to use it and was sold because it was supposed to be easy to use.
I am running xp with 3 GB of ram and a discarded empty hard drive.
I can never cut the video between my brands of menu whenever I do this what it cuts elsewhere usually outside my brands of menu.
When I stretch out my calendar to make things easier to see exactly where to place my bearings, I can't see my video because it's far behind my audio files and jumping all over the place.
It's really a poster of despair that I am at the end of my patience with something that seems to be very complecated and obviously will not work properly, so can you tell me please is my PC low-power or something?
Thank you
There are two possibilities:
Proxy editing, as shown HERE
and then by converting HDV.
I did neither, as I don't shoot AVCHD, but others have and can probably help you with the Proxy, or the conversion.
Good luck
Hunt
-
model update and synchronize documents using this
Hello
If I create a new template, and then I noticed that I want to change some parts of it, is possible to update all my documents using this model?
Thank you
If you ask will be updated from existing documents that have used this model automatically, the answer is no. The model is not a link, but a framework. When you save your new document you do exactly that--creating a new independent document.
You CAN bind an InDesing file to another by placing pages from a doc in another. Update the placed document will cause indesign ask you to update the link everywhere where it was used. The disadvantage is that you cannot 'customize' the data for the various documents by editing in the destination.
Peter
-
Compaq Evo D300: Multimedia Audio controller drivers/Codecs
Compaq IT support/Codec.
Dear community of Compaq.
I was informed by the Intel online community to contact Compaq for Codecs that are not themselves. Can you please help me by providing the necessary driver/Codec below?
The Intel answer/advice for me and my original question which is lower. Thank you very much.
Mr. BennettIntel community advice
"The device that you identified is the Intel high definition Audio interface. The driver you need really need is not for the interface itself, but for the media Codec that completes the circuit. Intel cannot help you with that. they do not have these Codecs. You must contact the Board vendor for the correct driver. »
My original Question from Intel
"Dear community.
Can someone help me find a driver "Multimedia Audio Controller" for the "Compaq Evo D300" PC?
Exact model: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=92161 & lang = to & cc = us
"077Ch" is the main map.
Company and feature:
VEN 8086
DEV 2445
I've upgraded to Windows 7 from XP but I think that Intel don't do drivers more for this PC.
I would be very grateful for help.
Thank you.Mr. Bennett"
Thank you.
Mr O Bennett
You are the very welcome.
I mean, it is explore you the file and select with the mouse, then click Next and it should install the driver
You cannot copy and paste anything.
You can first try this method easier to install the driver...
When you arrive at her browse my computer for driver software option, go to: C:\SWSetup\sp27103, make sure that the include subfolders is selected and see if the pilot goes like this.
The original file that I gave my instructions has the hardware ID you posted, so you need to install the driver (8086-2445)
[AnalogDevices]
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00070E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00080E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00090E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000B0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000C0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000D0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000E0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000F0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00100E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00880E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00890E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008B0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008C0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008D0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A50E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A60E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A70E11
% * WDM_AC97AUD. DeviceDesc % = WDM_SPINNA, PCI VEN_8086 & dev_2445 & subsys_000A0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_SPIDER, PCI VEN_8086 & dev_2445 & subsys_008A0E11
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_124C103C
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_80101043
% * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_890D1509
% * WDM_AC97AUD. DeviceDesc % = WDM_ICH_H, PCI VEN_8086 & dev_2445 & subsys_1274103C
% * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_126E103C
% * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_126F103C
% * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_1279103C
% * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_127A103C
% * WDM_AC97AUD. DeviceDesc % = WDM_AMAZON, PCI VEN_8086 & dev_2445 & subsys_806A1043
% * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_3084109F
% * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_3181109F
% * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_80761043 -
Satellite Pro M50 - need MODEL number
Hello world
I'm new to this bear so please with me. I'm looking to sell my Satellite Pro M50 and need model number to the list correctly.
Where can I find this number, you can.Thanks Keith.
Hello
Did you look on the bottom of the unit?
Please do.There should be a label that contains the serial number and model.
If you need the hardware specifications of notebooks and then use the model number and google for more details
I sure that you will find at the Toshiba m product page -
Toshiba 39L 3300 problems using external USB WLan WLM-20U2
Hello
Recently, I brought a 39L 3300 smart TV toshiba and got a free dongle for internet connection.
However, I was unable to connect to internet via wifi. The dongle I got from the Bank is a Toshiba dual band wireless LAN adapter WLM-model 20U2. But it doesn't seem to work at all when connected to the USB port. I checked with the other connectors USB port to watch movies and it works well.
The choice of type of network does not appear after the dongle is connected. Could there be a problem with this model of dongle? The user manual specifies a Toshiba dual band wireless LAN adapter WLM - 40U model. But the store gave her.
No matter which also I have this problem, please help.
> User manual specifies a Toshiba dual band wireless LAN adapter WLM - 40U model. But the store gave her.
Yes, of course the problems of compatibility between the TV and the WiFi dongle could cause this problem.
I recommend to use the recommended WLan dongle WLM - 40U for this model of TV -
HP envy: need help with model number
I bought the hp laptop from amazon yesterday and its model number is
15 - k151nr
I can't find any support or help about this model number... Why this model not appearing is not on the hp Web site.
can someone find me this model on the hp Web site so I can watch the user and other info guide.
Here is the link to laptop, I bought:
http://www.Amazon.com/GP/product/B00QE893TQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&PSC=1
Hello:
I can't find either, but you can use the support page of the HP ENVY laptop - 15-k151us, as the same hardware as yours.
http://support.HP.com/us-en/product/HP-envy-15-K100-notebook-PC/7234894/model/7450438/drivers
HP does not seem to have a page of product for your model specifications.
-
CUC - uses the model of eggs of 1000 users for users of 1100?
Hello world
According to http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/suppor...
If I select the model of the EGGS for 'Platform Overlay for up to 1,000 virtual users'
-Means that the user account and the mailbox in the UCA should not exceed 1000 UESRS?If I have 1100 UESRS and very very low use of voicemail, I can still using this model of EGGS "CUC 1000 user?
Thanks in advance
Sam
Hello
According to my understanding, surpassing the number of users speciied in EGGS will not raise any errors. However, given that the product has been tested with some settings for optimum performance, exceeding the specified limit is not recommended and very probably is not supported by the TAC in the case of any performance issues.
Manish
-Does the rate of useful messages-
-
IMessage will use the telephone number; use a colurriel instead
I had no service iphone since February, so I only use imessage on wifi. Today, however, he ceased to imessages send my phone number, and I don't know what to do. I tried to turn on and off imessage but it said activation pending and send & receive there is a circle of loading of my phone number and number highlighted grey. I've never had this happen before that I am at a loss
UH I have never asked a question here but: iPhone 5. 64G, about 38 available; I don't know what everything is on my phone :-/
beachpickle wrote:
I got no service iphone since February
This is perhaps the reason for your question? You use an iPhone that has no telephone service? So you have no cellular carrier currently associated with the iPhone? Yet, you want to use this phone number non-functional as the mechanism for your iMessages?
-
How to register and use a model of timetable for consistent YouTube videos?
Hey there,
I have a model I intend to use on a consistent basis for my YouTube channel.
It consists of a video intro, music, titles and some models of animation with the drop areas.
I want to be able to use this model for all videos and simply insert my images to save me time in the edition.
Is there a simple way to perform this?
(I have some ideas how to do that, but I want to know if there is a very simple way to do)
Select clips and create a compound clip. Store in a dedicated event (or library) and the name for easy access.
Russ
Maybe you are looking for
-
I need to remove my camera but the previous owner does not exist
Hi I have an ipad that has not been deleted correctly, and the previous owner is not available for me how to remove this ipad for my son can use it x
-
Loss of storage space on my MacBook Air
Kindly help... storage space of 250 GB on my MacBook Air suddenly shrunk to 5.2 GB. My disk cleaner has shown that I have 35.5 GB Cache Application and large 54.9 GB files. My laptop will work in problem if I clear the Cache of my Application? Thank
-
15 - f305dx: I need a discount to zero-92122312 administrative
Can someone help me with an administrative PW reset? I have a 92122312 deactivation code. Thank you.
-
Satellite L550-10N - cannot read CD
My laptop can read DVD-ROM, but cannot read the CD. When I try to insert a CD, it runs, but does not show anything and if I click on it, they say, there is no cd insert an and try again.
-
How to restore the data that was on my computer 3 days ago
original title: restore data Can someone tell me please how to restore my computer had on it three days ago? I'm on the ignorant point, so please tell me what buttons to push and in what order. Thank you very much.