Compaq Nc 6000: Device not complete Code 28

Dear Mr. Paul,

I have a problem with pc portable compaq nc 6000. I had upgraded to windows 7 32 bit on the old XP Professional. Everything worked well. Then I reinstalled, ex novo: windows 7 32-bit, but now I have the problem.

It says 2 BUS PCI Device 6 function 2 (not completed device Code 28). How to solve it?

Thank you.

[Personal information]

(Italy)

Hello.

That's the good news that you have to work on Windows 7.

Tags: Notebooks

Similar Questions

Windows don't con not load drivers for 6 to 4 adaptorCode 31__Tun mimiport con adaptor\device not stsrt Code 10

CDRom does not work and the DVD player does not work. Have you checked the two drivers are up-to-date.

Hello

For the 6to4 card number, which is separate from the issue of the CD/DVD.

Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

Nothing else to do, Windows will do the rest. And you can ignore errors if you wish and on some
computers, it will always be there but no problem to be expected.

On a Windows Vista-based computer or on a computer, Windows Server 2008, the card Microsoft ISATAP
appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520

==============================================

Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/

Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
solves the problem.

Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.

Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

If necessary:

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
that the troubleshooter does not, and those who "could" be the cause.

Check with your system manufacturer Maker and device for possible firmware updates and the good
Your player registry entries.

Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
a person with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Linksys wusb100 device not detected-'Code 43'

Original title: linksys wusb100 device not detected

I am running windows 7 64 bit I have a Linksys WUSB100 the error I get is Windows has stopped this device because it has reported problems. (Code 43) I think that the device does not work in windows 7 any idea out there

Hello
1. Have you made changes on the computer before this problem?
2. He previously worked?
3. Have you installed device driver oon your computer?
I suggest you try these methods and check the status of the issue.

Method 1:

Run the facilities of diagnostic tool do not work or are not detected in Windows

Hardware devices do not work or are not detected in Windows.

http://support.Microsoft.com/mats/hardware_device_problems/

Method 2:

Update a hardware driver that is not working properly.

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

Method 3:

Uninstall the device driver, download the latest driver by downloading from the website of the manufacturer of the device, install on your computer and check the status of the issue.

a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

b. in the list, double-click the type of device and then look for the specific device that is not working properly.

If an exclamation point appears next to the device name, Device Manager cannot find the device driver. Go to "Use Windows Update to find a device driver."

If no exclamation point appears next to the name of the device, go to "uninstall and reinstall the driver for the device."

Hauppauge HD PVR device not recognized / Code error 10

From the beginning, I bought a Hauppauge HD PVR about four months ago and, to my delight, it worked flawlessly out of the box on my laptop Toshiba in Windows Vista and my laptop Windows 7 Sony. I had saved a good part of my X - Box 360 images when, one day, the device has mysteriously stopped working on my Windows Vista laptop. Whenever I plug it into the laptop Toshiba, it registers as an unknown device or with a wrong code error 10 device. Sometimes, maybe once in ten when moving from one port to another, it will come to the top and works correctly, but if I dared to turn off the computer, turn off the PVR or unplug the USB cable it immediately returns to what is not recognized / 10 state code.

The laptop is a Toshiba Satellite A305.
The processor is an Intel Core 2 Duo T5800 2 .00GHz
There 4.00 GB RAM
The display adapter is an ATI Mobility Radeon HD 3470
I am running Windows Vista Service Pack 2, 64-Bit.

The device in question works perfectly on my other laptop. I tried another USB cable. I uninstalled and reinstalled the USB controllers repeatedly. I tried to uninstall and reinstall the drivers, as well as trying to do multiple versions of the drivers. The device works without error on the Sony laptop, but refuses to work correctly with the Toshiba.

Any help you could offer would be great.

Hi ZeroAlex,

Because you are always faced with the question, I suggest you do an InPlace Upgrade\Repair installation.

Note Run a repair installation will not damage files and applications that are currently installed on your computer. However, before you perform an Inplace upgrade, you can take a backup of important data. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

To perform an upgrade in-place, follow these steps.
a. close all running applications.

b. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

c. in the settings window, click install now.

Note If Windows does not automatically detect the DVD, follow these steps:

Click on start and type Drive: \setup.exe in the box to start the search.

Note The placeholder drive is the drive letter of the computer's DVD.

List programs, click Setup.exe.

In the settings window, click install now.

a. click go online to get the latest updates for installation (recommended).

b. type the CD key if you are prompted to do so.

c. in the "Windows Installer" page select the operating system you want to update or Inplace.

d. click Yes to accept the Microsoft software license agreement.

e. on the which type of installation you want? of the screen, click upgrade.

f. when the installation is complete, restart your computer.

For more information, please see the link:

How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

Once the upgrade has completed, you must activate your copy of Windows Vista.

For more information about how to activate Windows Vista, see the following article:

How to activate Windows Vista.

Hope this information is useful.

HP Deskjet F4180: Installation of the device not complete

Due to a printer problem, I had to reinstall all my drivers and software and did that on the HP site. However when I went to analyze, the Solution Center always tells me that "the device is not full. I'm no expert, but I've tried everything I can think of. I ran the doctor printing and scanning, the installation wizard. The impression scanning doctor tells me that Device Manager.ok: check.ok Device, device status ok, BUT Solution Center X,

HP printer test scan OK installation wizard.

However, when I tried again to do a reinstall of the printer's drivers/software when he asks me to add a device and I try to connect to the printer it does not seem to acknowldge that the printer is here!

Can anyone help please.

Thank you

Gerry

Hello

Could you please follow the first link and uninstall all the hp Sw of your system

http://support.HP.com/us-en/product/HP-DeskJet-F4100-all-in-one-printer-series/3177560/model/3177564/document/c02259020/

you will need to install the driver of all the features.

Besides some Hp software require for Flash player, XML, Java, Netframe phaser works and dotnetFx. Please ensure that all the Sw above installed on your system.

Compaq Presario C303NR is not completely put on after the new RAM upgrade

Hello Paul,

It's Tammy. I finally took the time this morning to upgrade the ram in my laptop, model C303nr. And I am desperate need help because something has gone terribly wrong.

The laptop starts up to my office, I get nothing but then move lines, a little like snow tv, but more structured. I took the new memory on a couple of times and tried to re-sitting, but I get the same results. Furthermore, when I tried to put the old memory, exactly the same thing happens. Have I completely broke my laptop?

Can you or anyone out there please help me. This is my first attempt to do something like that and I feel absolutely sick results.

Clinging to hope for a fix.

Tammy

Hi Paul,.

I must say once again, you have a way very appreciated to bring the balance to my pc problems.

During my first attempt to install new ram not worked, I thought that I had inadvertently he damaged everything trying to embed. (It is certainly not a room of heap for the maneuver of the ram, clips and fingers! Besides, while trying to stay grounded.) Then, when I couldn't get the old RAM to work either, I thought I had I damaged the laptop everything somehow. It was a horrible feeling.

Even after that I finally got the new ram to work, I felt bad to not get it in correctly the first time. I felt as if I should have been able to prevent any inconvenience on my part. However, when I read that you have recently encountered a problem with ram of your son, your post made me appreciate that sometimes things happen if its your first time or umpteenth time to do.

Thank you for giving me the space to hold myself.

In addition, I can imagine how the ram of your son was stuck. If that does not damage its ram, then maybe ram is a bit more durable than the shell egg-nitroglycerin, I felt... like manipulating its fragility should not always be a concern.

I wish you the best,

Tammy

Windows Vista Home Premiun auto restoration and backup; Save the error code: i/o device error (0x8007045D), file backup complete normar will not complete successfully.

Device error Code: i/o Device (08007045D) error Code... trying to make a backup of normal file that goes all the way and then produces this error code.

Hey Rodney,

To resolve this issue, follow these steps:
1. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
2. at a command prompt, type the following command and press ENTER: Chkdsk/r X:
Note: In this command, x is a placeholder that represents the drive letter of the volume you want to check.
3. press y when you are prompted to check the drive the next time the system restarts.
4. close all applications and restart the computer.
Note: When you restart, Windows checks the drive for errors, and then Windows starts.
5. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.

For more information, see this article: http://support.microsoft.com/kb/952272

I hope this helps.

Kind regards
Syed
Answers from Microsoft supports the engineer.

Device could not start - Code 10 - Intel Wireless Card on NB550D

Hello world

It's just a normal Toshiba NB550D netbook

The only thing I change is the card inside Wireless: the original is an Atheros common half mini card. Recently, I have the urge to use internet in 5 ghz (frequency).

So, I decided to replace the old with the * half mini card Intel Wifi Link 5100 AGN *.
It turns so well. The pilot is not recognized or specifically the windows tries to install the driver but FAIL is reported. Device manager tool shows a "!" next to the network adapter and when I go the properties on the general tab: "* the device could not start - Code 10."

I tried many ways to uninstall the driver and reinstall it again; also tried to download the drivers from the website of toshiba for the network card intel.

Nothing works so far and yes I don't know what to do now.

The possibility that the card intel is broken or defective is eliminated because I checked with another laptop already and just, it worked like a charm.

Please help me solve this problem. I really need to use two strips (2.4 and 5 ghz) internet.
Appreciate any help!

> The possibility that the card intel is broken or defective is eliminated because I checked with another laptop already and just, it worked like a charm

Regarding the error code 10:
http://support.Microsoft.com/kb/943104/en-us

+ The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. +

I put t think deliver its wireless network card might be a compatibility problem between the BIOS and the wireless network adapter.
All devices are supported by the BIOS.

But the WLan card already appears in Device Manager and so I think that there should not be a BIOS compatibility issue.

Have you checked if the chipset would properly address the Wlan card?

Pavilion 14-ab103TX: Devices driver is not complete (code28) with Windows 7

Dear team of experts,

I just install win 7 (32 bit) in my new Pavilion 14-ab103TX. After finishing the error as follows, Device Manager

1 network controller; Location PCI slot 5 (bus PCI 3, device 0, function 0)

2 PCI of Acquisition of data and Signal Processing controller; Good PCI bus 0, device 4, function 0

3 PCI Device; Location PCI Slot 4 (bus 2 PCI, device 0, function 0)

4 PCI Simple Communications controller. Location PCI bus 0, device 22, function0

5 unknown device; Location on PCI bus

6 unknown device; Location on system compatible ACPI Microsoft

7 unknown device; Location on system compatible ACPI Microsoft

8. unknown device; Location on system compatible ACPI Microsoft

all type of device: another device

Manufacturer: unknown

Error: The device for this device are not installed (Code 28)

Could you please advice me how to find all the updated device driver?

Looking forward to hearing from you soon

Thank you and best regards,

Komsak

Hello:

Try the driver for the card wirelessly directly from Intel: 2nd driver on the left side of the page.

https://Downloadcenter.Intel.com/download/25684/Intel-PROSet-Wireless-software-for-Windows-8-1-

Try this chipset driver...

FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71864.exe

And this driver imei...

FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72884.exe

HP Photosmart B110: HP Solution Center cannot run because your device installation is not complete

Since the recent 10 upgrade Windows HP Solution Center no longer works. After the initial Welcome screen, it says "HP Solution Center cannot work because your device installation is not complete."

The following tips on previous discussions and the support centre, I tried uninstalling and reinstalling several times printing software. I ' v has also ensured that adobe Reader DC is up-to-date.

Printing and scanning are fine from other programs.

Any ideas?

Hello

Thank you for using the HP Forums.

Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?

https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...

Download the software COMPLETE features here.

Let us know if it works!

Installation of device HP Solution Center is not complete

I have a PhotoSmart C7280 all-in-one printer works as a printer in Ethernet network. My PC is a HP Pavilion Slimline s5280t running Windows 7 Pro 64 bit. I had the printer for longer that I had the Pavilion. I use HP Solution Center at least once a month to copy documents in PDF format for a job that I have. Yesterday, I tried to use it and got the error "device is not complete. Uninstall and reinstall HP Solution Center did not work. I did some research on the forums and found the discussion of «records starting with 7Z.»

I ran the Uninstall_L3.bat last night. He uninstalled everything. I then downloaded the drivers on the HP site, once again. When I ran the installation, it failed because "a file is missing. He has not said what file. He created a 'solution' for me, basically going through all the steps to make sure that the printer and the router are working (they are) and the printer was on the network (IE). I then downloaded the drivers AGAIN and again ONCE had a "missing file" error on installation. And my printer has been uninstalled. And I have a NEW suggestion from HP that I should reinstall after turning off all my startup tasks and reboot.

If the driver package for the C7280 is defective and right now I'd bet money that it's telling me to turn off my startup list, which has not changed in the month, will not help. Because my printer is no longer under warranty (hey, my PC is out of warranty), I don't expect any help from HP. I hope that some other users will be able to offer something that will work. I'm about to go back on the CD supplied with the printer and install from that. Help?

Sorry, you had a difficult time getting the solution center to work. You have certainly done all the basic steps and advanced to make this work. I always keep a forum post stored on my computer that supports troubleshooting the solution at a different level of the Art Center.

-HP - SOLUTION Solution Center installation problems! --

I recommend reading this post to review the comments and see how to play the stages and how some problems are exposed. Certainly, it treats missing files that you referenced.

I usually just scan using paint or Windows Fax and Scan as soon as I can print as it is just a little more easy to work in the registry of a HP computer. So please be careful if you choose to go in the registry.

First thing first, I recommend you to create a different user account in the control panel with the admin rights, then by running the installation disk in the second user account before you attempt anything in the post on the forum above. This will eliminate any conflict from previous attempts on the main user account.

I really hope it works for you! Let me know error messages that you get when installing with the disc.

"Solution Center cannot work because your device installation is not complete."

I read the posts that deal with this problem before, but none of the solutions seem to work for me. When you try to open the solution Center I get the error message: "Solution Center cannot work because your installation of the device is not complete." Argh, again! He used to work, but all of a sudden no longer. I uninstalled it, reinstalled, restarted print spooling, update adobe flash, has run windows updates, changed the "HP CUE Device Discovery" start-up, disabled virus protection, tried to connect by USB instead of wireless, etc... I also tried:

1. download and install the following update

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77751-1&cc=us&DLC=en&LC=en&... =

2. type % temp % in the field of race

3. Locate and open the folder starting with 7z (example: 7zS2356)

4 open the Util folder

5 open the CCC folder

...

...

.. but is there a "Util" folder in the folder starting with 7z...

I don't have a disk, rather downloaded the software.

It sucks, any other suggestions...?

I have a computer Dell Vostro laptop running Windows 7 Professional 32 - bit and 64 - bit, connected wireless to a HP Photosmart C4599 all-in-one.

Thanks in advance for any help!

I finally got it! I have decided, once more, uninstall and reinstall. I eventually several files that began with 7z... I found one who had a "Util" folder it contains and a "CCC file" in this context, so I was able to continue with instructions of a related post, HP employee "pcwizard":

If the software has been downloaded and extracted to your system:

1. type % temp % in the field of race

2. Locate and open the folder starting with 7z (example: 7zS2356)

3 open the Util folder

4 open the CCC folder

5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

6. once the uninstall is complete, restart the computer

7 run the Accessories\ System Tools Disk Cleanup

8. download and install the latest version of Adobe flash player

http://www.Adobe.com/support/flashplayer/downloads.html

9 download drivers and full software features

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80348-1&cc=us&DLC=en&LC=en&...=

10. run the download to reinstall the printer

So I'm pumped it worked, but why is this problem even occurs?

OfficeJet 7310 all-in-One: the device is not complete - Officejet 7310

Initially, a 10 on my network windows desktop could no longer communicate with my Officejet 7310 all-in-one ethernet connection. The Office recognizes the 7310 as a printer, but not as an all-in-one. I tried to reinstall the software using the prescribed protocols, without success. I decided to ignore the problem. The Office could still use the 7310 as a printer, but not as an all-in-one. In addition, my two laptops could always use the all-in-one features.

Today, no reason apparent, the all-in-one feature has stopped working on my windows of 10 laptops. When I tried to scan a document, I received a message that says: "device to complete installation. Attach the usb cable or reinstall the software. "I am more able to reinstall the all-in-one software. Just like with my office, my laptop can use the all-in-one printing function, but cannot use the functions of HP Solutions Center.

I used the protocols recommended - uninstall the 7310, running windows disk cleanup, run ccleaner registery cleaner, closing all devices on the network except the 7310 and a laptop. Nothing works, despite several attempts on various computers. Is no longer, I can install the software of HP Solutions Center on any of my windows 10, 64-bit, PCs - wired or wireless. The 7310 is essentially a 'brick', because it no longer works as an all-in-one.

What can I do to fix this? Help.

Hey @fatz2fly,

I don't think that you have missed something, but I recommend you uninstall a more holistic approach at this stage. I know that this appears at first sight very complicated, but I burst in instructions step by step to make it easy to follow
1. Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
  - Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
2. Delete the printer devices and printers and the driver from the properties of the server. See the instructions below before proceeding to step 3.
3. Download the software and choose Save as, save to desktop >AIO_CDB_Net_Full_Win_WW_130_141.exe
  - After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  - Locate and open the folder starting with 7z (example: 7zS2356)
  - Open the Util folder
  - The CCC folder
  - If you have a computer HP run the L3uninstall.exe. If you have acomputer no HP run the L4uninstall.exe
4. Once the uninstall is complete, reboot the computer
5. Download and run CCleaner - How to use CCleaner.
  Installing software on the computer with a registry key, its place would be like trying to paint a wall with a hole in it, you need to patch the hole first. Repair the registry, and then install the software. Registry cleaners can be useful tools to solve certain types of problems in the registry, as those that are created when a program does not properly uninstall or a malware infection is not cleaned properly.
  
  This suggestion is not a document of HP, it is my own opinion. My preference is CCleaner, I use it on my computers. If you have a registry cleaner already, or that you prefer, you can use it.
Follow these steps to reset the registry settings and options for Windows Installer.
- Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
- In the Open box, type msiexec /Unregister, and then click OK.
- Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
- In the Open box, type msiexec/regserver, and then click OK

* Note: there is a space between the c and the /.

If you do not at this stage, use this link to perform another way. Restart Windows install

Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer
Download and run the HP printer install wizard for Windows
The HP printer for window installation wizard was created to help Windows 7, 8, 8.1 and 10 users download and install the most recent and most appropriate HP software solution for their HP printer.

Please let me know if that solves the problem, or if you need assistance. Thank you!

_______________________________________________________________________________________

REMOVE THE DRIVER FROM THE PRINT SERVER PROPERTIES

1. in the folder "devices and printers".

2. choose "print server properties.

Win XP - with no printer selected, click 'File' then 'server properties '.
Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

3. click on the "Drivers" tab at the top of the window "properties of the print server.

4. choose the printer that you want to uninstall, and then click 'remove '.

5. choose "Remove driver only.

6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

Now return to step 3 of the instructions above.

My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

They are only updated office or all updates?

For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

then manually download and install the same.

If all updates, perhaps consider the following general tips-

Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

Method 1: Save the Windows Update files

1. Click Start and type notepad in the box start the search.
2. click on Notepad in the list programs.
3. copy the following commands, and then paste them into the opened Notepad window:
REGSVR32 WUPS2. DLL/S
REGSVR32 STINKS. DLL/S
REGSVR32 WUAUENG. DLL/S
REGSVR32 WUAPI. DLL/S
REGSVR32 WUCLTUX. DLL/S
REGSVR32 WUWEBV. DLL/S
REGSVR32 JSCRIPT. DLL/S
REGSVR32 MSXML3. DLL/S
4. in Notepad, on the file menu, click Save as.
5. in the file type list, click all files.
6. in the file name box, type register.bat.
7. save the Register.bat file to your desktop.
8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
9. try to reinstall updates.

http://support.Microsoft.com/kb/958053
See: method 1: save the Windows Update files

http://support.Microsoft.com/kb/326253
Method 5: Registry Windows Update engine files

http://support.Microsoft.com/kb/971058
How to reset the Windows Update components?

Method 2: Download and install Windows Update agent

Windows Update Agent

How to get the latest version of the Windows Update Agent to help manage updates on a computer
http://support.Microsoft.com/kb/949104

Information for network administrators about how to obtain the latest Windows Update Agent
http://support.Microsoft.com/kb/946928

Click Start, click run, click Browse, navigate to the file you saved and click Open.

Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

Click run.

Follow the steps to complete the wizard.

Important

To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

TaurArian [MVP] 2005-2010 - Update Services

SM Bus controller device drivers are not installed (code 28) XP Home Edition

Recently, I installed Norton 360 and ran a diagnostic report which found the device SM Bus controller drivers are not installed (code 28). I tried to re - install from the original disc of XP Home Edition, but he couldn't find it. Where can I download this from and how to install iI? Thank you.

Hello

Thanks for posting your query in Microsoft Community.

According the information you have provided, I understand that you found the error code 28 in Windows XP. I will certainly help you in this matter.

Please follow the link and check it out.

Explanation of error codes generated by Device Manager in Windows XP Professional

http://support.Microsoft.com/kb/310123

Using the windows-related issues feel free to post on the Microsoft Community Forum.

Compaq Nc 6000: Device not complete Code 28

Similar Questions

Maybe you are looking for