Compaq Presario 2199US recovery help

Similar Questions

• Compaq presario system recovery

  I did a recovery of the system about 3 weeks ago and although I managed to install all the parameters of my return, I have problems with the updates of windows XP.

  Before the resumption, I have SP3, but after recovery there was SP2, I tried to install SP3 which succeeded and that was many things got ugly tried to uninstall SP3 but as strange as it may seem my computer says no file found did not have any backup that I threw it myself, so I had to reset the settings of scratch internet connections find music files, install media player, explore 8...

  If someone can help me here, I would be very grateful...

  Thank you very much

  Graham

  Graham,

  Here are the specifications of your desktop Compaq Presario SR1705UK. According to the specifications, it was delivered with Microsoft Windows XP Home Edition SP2 installed at the factory. The recovery media HP Recovery for this computer will also install XP Home SP2 when a recovery is preformed. SP2 is no longer supported by Microsoft and now supports the SP3.

  After you install SP3, what kinds of things did you have trouble with? Please provide as much information as possible. You're OK with doing once again, HP recovery to try to eliminate all the problems?

  To install SP3, the simplest method is to download the Package to install Windows XP Service Pack 3 network. You can ignore the message "this installation package is intended for it professionals and developers downloading and installing on multiple computers on a network...." "This download installs fine on a single computer. You can also download and burn the Windows XP Service Pack 3 - file to Image CD ISO-9660 instead. Yet once, ignore the message on the use of Windows update to a single computer.

• Compaq Presario CQ61: Need help with my Compaq Presario CQ61 after years of reflection, I had lost my files

  I HAVE a COMPAQ PRESARIO cq61 I died so I him I had sitting around the House for a while. I decided I had a lot of personal stuff on it just throw like family photos and videos. Then my mother ordered me a new battery & charger and the sound wahhlahh works again but its been like 4 years since I used it, and now I get a screen that says enter admin or the key to the power on password error its gave me is 87754760 please help if you can

  Hello

  Enter: 38632366

  Kind regards

  DP - K

• COMPAQ PRESARIO CQ61: Recovery of Bios Password COMPAQ PRESARIO CQ61

  Recovery Bios Password COMPAQ PRESARIO CQ61 operating system: Microsoft Windows 7 (32 bit) Hello, I have a COMPAQ PRESARIO CQ61 and suddenly asks me the password of the bios. The message that appears is "ENTER password or POWER ON PASSWORD". What can I do? After failing 3 times I get the message "System disabled" and the code 50949691

  Hello

  Please read the first post on the link below...

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• Compaq Presario driver Audio Help

  Hello

  I need assistance with my audio driver. I recently installed a new graphics card and updated my computer with more ram. After that I did, my audo has stopped working. I could recognize what Audio (Realtek High Defininition) audio driver, I had

  but I'm not able to install and fix the noise issue.

  When I install my audio driver (sp26731)... I get an error in the middle of the adage about installation...

  [IMG] http://i.imgur.com/FbLXyXd.PNG [line]

  I tried to install the audio driver Microsoft UAA High definition but it closes when the instantwizard starts to run. I don't know what the problem is but, I can't install it completely.

  It's my device manager:

  [IMG] http://i.imgur.com/qsFtN7q.PNG [line]

  Product name: Compaq Presario SR193ONX (EX321AA)

  Operating system: Windows XP

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&LC=en&product=3190728&query=EX321AA

  Adding new hardware:

  [IMG] http://i.imgur.com/X4bNyxv.PNG [line]

  Thank you

  Gurjot511

  Hello:

  If your new video card also has an HDMI port (which most of them do these days), the audio chip embedded to HDMI on the disabled video card audio integrated (Realtek) PC.

  The solution is simple.

  Go into BIOS and find the onboard audio setting. It will be either automatic or off value.

  Change the setting to "Enabled". Save the configuration there and again when you exit the BIOS.

  On reboot, you should have your on-board audio back.

• Compaq Presario v2000 need help for recovery

  Hello

  I recently got a virus on my laptop, and I am not able to get off at the stop. I just want to remove my computer laptop everything and restore the operating system. The Virus has disabled the start menu, and I have no recovery discs. Help would be amazing!

  I don't know if I've got some records or not, I will check! If this isn't the case, I will call HP, thanks!

• Compaq Presario cq57 admin help

  Ive forgot the admin password and after trying to enter several times my screen now says SYSTEM DISABLED (91586009)
  CAN SOMEONE HELP ME PLEASE IN MY LAPTOP

  Hello

  Enter: 24484029

  Kind regards

  DP - K

• Compaq presario CQ57: need help with to enter password administrator or power on password

  I need help when I started my pc in the screan apears enter password mot_passe_administrateur or power
  I try to put a few passwords and says system disabled 62568899
  Please help me

  @aniaraariana

  Enter: 73440219

  Kind regards

  DP - K

• Compaq Presario v400t: Please help

  I forgot my password did not use the computer in 3 years have a code system off 07312

  Hello

  Enter cvmmbyg

  or

  mnhrqrb

  Kind regards

  DP - K

• Power on password disabled system [84997967] Compaq Presario CQ43

  PowerOn password

  System disabled

  [84997967]

  Compaq Presario CQ43

  Help, please.

  Thank you :-)

  Hello

  Try to enter: 31695369

  Kind regards

  DP - K

• Compaq Presario SR1150NX: Error, disk Compaq recovery dead

  Hello, I have a desktop Compaq Presario SR1150NX of 2005. Everything works well in it and we emptied dust not for long. But then, one day I went to start it it says a critical system file was missing. I'm confused at first. After half an hour, creating a USB disk only to find it didn't work, I then had to use the Windows XP Recovery Console. Then after I fixed it it still didn't start because it couldint find the file. But when I start the computer, it shows me that, if I press F10, it boots into system recovery mode. OT started and told me that I could boot into windows xp system recovery. But in the middle of this, the computer overheats and shuts down. When I tried to turn it on again it gave me a disc error AND when I boot in recoervy, it's just bluescreens. Now when I turn on the computer, it does nothing.

  Is there any where where I could download a recoervy tool to open the hard drive in order to get the data on the drive and get a new drive? Or get a Windows recovery disc?

  Any help is the Apprecited!

  Remove the disk from the desktop.

  Buy

  USB 2.0 for HDD SATA/IDE adapter 2.5/3.5/5.25IN drives w / adapter

  See: http://www.ncix.com/detail/usb2-0-to-sata-ide-drive-adapter-a3-17762.htm

  and connect your hard disk with this adapter to a USB port on your computer.

  When you connect, Windows will ask your permission to run 'check disk' ('CHKDSK') to review and fix any problem of file system.

  I think that the corrupt currently-system files on the hard drive is causing startup problems you reported.

  Re-connect the desktop "repaired" disk drive, and then try again.

• Compaq Presario SR5130NX: Cannot start Windows Vista after failure - HELP!

  Hello! My building has undergone a complete failure so 4 days ago I used it. Power resumed 3 hours later, but I was not able to log on since.
  
  
  
  
  
  Normally, I turn on my PC, and about 30 seconds later, a window pops up asking you my password. After entering it, the PC come by my office. Now, when I turn on the PC, it brings me to a blue screen with a mouse cursor in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  When I press F8 during the boot process and choose an option from the window "Advanced Boot Options", I still can't start my computer normally.
  
  
  
  
  
  Here's the "Advanced Boot Options" I tried, after consultation with my brother a little more PC-savvy:
  
  
  
  
  
  1 repair your computer - after I see my black screen that is usual with the words "Microsoft Corporation" under the green bars that scroll from left to right for about 15 seconds, a blue screen appears with the mouse pointer in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  2 mode safe - while the PC display several files on start up and down, it stops on "Loaded: \windows\system32\drivers\disk.sys" for about 20 seconds, then proceeds to a black screen with the words "Safe Mode" in the 4 corners and the mouse cursor at the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  3 safe mode with network - see "Safe Mode" above.
  
  
  
  
  
  4 safe mode with command prompt - see 'Safe Mode' above.
  
  
  
  
  
  5 last known good Configuration (Advanced) - see "repair your computer" above.
  
  
  
  
  
  6 start Windows normally - see "Repair your computer" above.
  
  
  
  
  
  7 debug mode - see "Repair your computer" above.
  
  
  
  
  
  I downloaded a DVD recovery based on Linux in knopper.net, allowing me to access important files, which I copied from the desktop to an external hard drive (4.1 GB iso file).
  
  
  
  
  
  PC Windows XP of my brother has a recovery disk, but my Windows Vista PC did not come with one. I've seen a few paid versions, but looked resources due to cool weather and free shipping.
  
  
  
  
  
  I can't tell if I have the 23-bit or the 64 bit version of Windows Vista, so I downloaded both versions of an open source sourceforge.NET startup repair, which I burned on 2 DVDs. After you run the startup repair program using two DVD, the diagnostic results have been uploaded online at ubuntu.com for review and technical analysis. Here are the links:
  
  
  
  
  
  http://Paste.Ubuntu.com/16018001/
  
  http://Paste.Ubuntu.com/16019372/
  
  http://Paste.Ubuntu.com/16040380/
  
  
  
  
  
  The last report ended with the words "start managed to fix...".  You can now restart your computer. "But I always encounter a blank screen (black or blue) when I try to log on to my PC.
  
  
  
  
  
  Here are my details of PC, if it is useful:
  
  
  
  
  
  Desktop Compaq Presario SR5130NX
  
  Serial number: [personal information]
  
  Product number: GC667AA
  
  Warranty end date: October 5, 2013 (according to Compaq/HP.com)
  
  
  
  http://support.HP.com/us-en/product/Compaq-Presario-SR5100-desktop-PC-series/3436764
  
  
  
  
  
  Thanks for any help you can provide.

  Hello

  Since you already have KNOPPIX I try Gparted and use it to 'clean up' the score because it will stop in an impure State.

  NTFS

  [1]

  [11]

  NTFS-3 g / important

  GParted will try.

  Also, I would consider the old problem with fat systems, floppy disks etc. which sometimes a copy of sys files from a floppy disk to a hard drive has reactivated a bootable system.

  So, if system files have been damaged, then replace them since a Setup disk.  Because he goes to options, what kind of work.

  https://en.Wikipedia.org/wiki/Windows_Vista_startup_process

  • Windows Boot Manager (Bootmgr.exe)

  • Windows operating system loader (Winload.exe)

  • Recovery of Windows loader (Winresume.exe)

• Recovery of Phoenix for HP - Compaq Presario v6604AU crisis

  Hello

  Recently, I got my - computer v6604AU laptop compaq presario with phoenix BIOS and AMD Athlon dual core processor - brick with a bad flash update.

  I tried to use flash files extracted update bios slot location

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-93354-1&cc=us&DLC=en&LC=en&...

  1. I used them to create the phoenix recovery disk in a 1 gb USB Thumb Drive.

  The configuration of the bios for my laptop contains also 2 WPH files: 30CFF34A. WPH and 30CFF34B. WPH

  I used the first because it was newer.

  2. removed the battery and the power, you press Win + B (only this combination of keys the key USB LED lights)

  But the USB twinkling like when its being used to read. The CPU fan speed remains low. And all of the other lights out as stated in many forums.

  Then I let the key combination, I insisted on this.

  Leave the computer on for about 20 min, but the flash does not.

  Please me know anything useful if you fall on it.

  Thanks in advance.

  [Edit]

  Recently, tried the same thing with the floppy USB drive

  Like crazy laptop beeps and the floppy drive reads data. (This means that the recovery option is available for this BIOS)

  but nothing happens after reading the disk.

  Maybe I'm missing something.

  May be that the combination of files is not correct.

  Need help!

  It seems that you are making progress with the floppy drive. Use one of the USB ports on the left side of the laptop, they are soldered directly on the system board. Although this should not make a difference, it is best to assume this will be.

  If the BIOS file won't work not erase the floppy drive and then repeat with the other file.

  It can also be better to assume that there is something wrong with that BIOS update and use an older BIOS which is known to work. If you know your a recent, so it is best.

  If you still have your HP tools partition on the hard drive, try the procedure affects 'Windows' and 'B' with nothing plugged into the USB port. The HP Tools partition is supposed to contain the latest BIOS to work to bring relief to a corrupt update.

  Are you running W7, if this is the case and you tried to update the BIOS under W7, then which caused your original problem. This is because the BIOS files were designed to be executed in a Vista environment.

• recovery system for Compaq Presario V6310US disks

  Real novice here and, of course, I did not receovery disks when I bought my laptop.  Talked to HP colleagues tonight on the purchase of recovery disc for my Compaq Presario V6310US.  He told me that I don't have to buy records; that I could go to HP.com and download them here.  Told me it was easy.  I told him that he did not know me!  I had the location of the driver/software and see a lot of things listed (including the order form to purchase recovery discs) but don't know what to do (other than to order discs by mail for me).  Am I supposed to just to buy the discs or am that I supposed to burn discs for all the other things that listed there and not buy discs by mail?

  Your help, in the simplest of words, is much appreciated.

  Message edited by hp4578 on 03/01/2009 21:39

  You must phone/web-form to order them and have them sent you... There is no mechanism in place to download records (officially) from the HP website.

• Compaq presario owner, who lost recovery discs

  Hi, a friend who bought a new v2000 Compaq Presario back in 2005/6 should reinstall its OS XP home.  He has no recollection of any recovery disks and there is no partition recovery using F don't numbers ect.  I said maybe we could buy a new copy of XP home on ebay however, the number of sticker COSTS on the back of his laptop computer also appears in the BIOS, before spend us money on a drive someone can confirm that it will work on the assumption that the seller provides us with a COA sticker and license number?

  We tried HP/Compaq and they use now a third party (best2serve?) to solve questions of guarantee such as recovery discs, despite the many requests for assistance so that their web site seems to just be dead in the water.  My friend is willing to pay for drives but does not have to be from his pocket a copy of mickey mouse that is missed, it is not the kind of guy who wants to be illegal ect, any help would be appreciated, thanks in advance.

  Dave

  "Landcruiser80" wrote in message News: * e-mail address is removed from the privacy * .com...

  Hi, a friend who bought a new v2000 Compaq Presario back in 2005/6 should reinstall its OS XP home.  He has no recollection of any recovery disks and there is no partition recovery using F don't numbers ect.  I said maybe we could buy a new copy of XP home on ebay however, the number of sticker COSTS on the back of his laptop computer also appears in the BIOS, before spend us money on a drive someone can confirm that it will work on the assumption that the seller provides us with a COA sticker and license number?

  We tried HP/Compaq and they use now a third party (best2serve?) to solve questions of guarantee such as recovery discs, despite the many requests for assistance so that their web site seems to just be dead in the water.  My friend is willing to pay for drives but does not have to be from his pocket a copy of mickey mouse that is missed, it is not the kind of guy who wants to be illegal ect, any help would be appreciated, thanks in advance.

  Dave

  This site has a recovery disc for your computer http://www.restoredisks.com/default.aspx never used them but apparently they are reliable.  You may need to use the OEM key on the bottom of the laptop to activate so you make sure you get the correct version.