Compaq Presario CQ56-219WM: Compaq Presario CQ56 laptop-CQ56 219WM - off System [73965989]

I have a Compaq Presario CQ56 CQ56-219WM laptop

He just started to ask for a password "Administrator" or "Power On" password

After 3 tries, I get this message.

Disabled system [73965989]

What should I do?  Please help and thanks in advance.

Advertisement

Hello

Please enter:

62643309

Kind regards.

Tags: Notebooks

Similar Questions

  • Compaq Presario 2586US laptop - hard drive upgrade

    Recently, I took a chance and bought 2 'parts only' Compaq Presario 2500 laptop computer series off Ebay and was able to make a unique work PC with motherboard of the 2586US being the motherboard, I used.  I don't have a hard drive, so I bought a Samsung 160 GB ATA drive.  Turns out I have to not need the adapter on the end of bus because it plugged right in the motherboard making.  The reader is supposed to be ATA100 and ATA133 at the upper end (I don't remember which).  I put the drive and installed Windows.  I noticed that it seemed slow but Windows showed the disc to the original format.  Then I went to dual-boot with a Linux distribution and encountered errors.  Thanks to a lot of research on the web I found the BIOS and the IDE interface itself (?) apparently does not have a drive larger than 137 GB.  I checked the BIOS and indeed it says the maximum usable size 137 GB.  It also shows the transfer rate to DMA2, which, as I understand it, means that it is only the transfer to 33 MB instead of 100 or 133 MB.  The service manual says ATA100, so it should support a transfer DMA5 rate.

    I don't pretend to understand all of this at all.  So, I'm looking for help.

    (1) is anyway to go beyond 137 GB on a hard drive in this laptop?

    (2) otherwise, it's the fact that my drive is actually 160 GB when the PC support 137Go cause more problems?

    (3) what should I do to obtain a rate of transfer beyond DMA2?  The configuration of the BIOS doesn't let me tab this field to change.

    Thanks for any help and explanations that I can understand.  Don't forget that I am just your average Joe and not some kind of expert at all.  I found a lot of this on the web but don't know what it means.

    Thanks in advance!

    Dave

    After a lot of research and reading on the net, I found the following link:

    http://wwwcsif.cs.ucdavis.edu/~leeey/A7A266/

    Basically, the driver ALi M5229 was the problem.  It was not really support the DMA modes.  The link explains this and provides a link for the driver of the UDMA for the chip (it is not only the miniport driver that you get from the Compaq/HP site).  I installed it, had to reboot about 3 or 4 times due to messages "new hardware has been installed, but a reboot is required.  When I finally got around those I noticed that in Device Manager I see the ALi controller and it is listed as a UDMA controller now.  The individual channels are not displayed (the pilot seems to configure the drives as SCSI peripheral nickname).  Using the included ALi utility, it shows my driver running at ATA100/133.  Startup, everything including startup items until my office is there, the system's busiest has been reduced to about 1/4 or 1/5 while she was before.   I have a new system of hearts for my office, so sometimes I think that it still seems a bit slow, but there is a world of difference between a modern quad core system and this old laptop P4 architecture, etc..  But okay, the laptop works fine now in Windows.  Now I'll have to see what it looks like for Linux, because I have no idea what it uses for the driver ALi M5229.

    I think we can safely call this thread closed, how ever do you that.  Somehow, I thought she was going to be a bit obscure, and I guess you can say it was!

    Thank you all for any help here!

  • Compaq Presario F700 laptop - replacement of Ethernet (NIC)

    Hi all!

    I have recently switched to my laptop to XP. I had the hardest time finding drivers for the LAN.  So I finally found them and now the connection is always limited or no connectivity when connected via ethernet.

    I tried to release and renew the IP address, but the system is unable to renew it through CMD.  My internet works fine with my other two computers.  I used the same ethernet cable connected to this computer to my laptop and they are all lead to limited connectivity or not.

    I think that the NETWORK card must be replaced, but I can't find the replacement part number.  I don't see the number for the WLAN.  Could this be the same room?  I don't think so, because the wireless is fine, it's just the connection to the LAN which I seem to have a problem with.  I see not even where I can access the bottom of the laptop ethernet card.

    I received the spare part of this thread - http://h30434.www3.hp.com/t5/Notebook-Hardware/Compaq-Presario-F700-Laptop-NIC-Replacement/td-p/1639...

    Anyone know what part I need to replace the LAN ethernet, not wifi adapter?  (unless they are the same, want to make sure before order).

    Thank you!

    Hello:

    To replace the ethernet card, you will need to replace the motherboard together.

    The link you mentioned (which I answered the way back when), was to replace the wireless network card.

    I recommend that you just buy an adapter USB to RJ-45 ethernet until you buy a new PC.

    If your laptop has an amd processor, XP driver you should use.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42431-1 & CC = US & DLC = in & LC = on & os = 228 & Product = 3224052 & sw_lang =

  • Compaq mini 700: Compaq mini 700 laptop error fatal system shut down.

    Compaq mini 700 laptop error fatal system shut down.

    CNU9144WRX

    can you pls give me a current password. my mini doesen´t have a.

    THX

    Hello

    Enter: e9lo3vvdb4 (to be noted that in both cases, the 3rd character is a lowercase L)

    or

    e9lo3vvdbr

    Kind regards

    DP - K

  • HP Presario CQ61 laptop no audio from sites internet CNN, etc., w/audio player, iTunes.

    HP Presario CQ61 Notebook, Windows 7 operating system.

    No error message. I made no changes except for upates automatic.

    I listen to myself and trying to follow the instructions in troubleshooting a netbook ACER on YouTube, when I lost audio.

    Since that time, I got audio from any Web site.  I found that this only happens with one of the users on the laptop. the other user has audio on Web sites.  Help.

    Hello

    Please find the link given below might help you solve your problem.

    Don't fix no sound or Audio problems in Windows

  • Updated BIOS for Compaq F700 computer laptop Windows 7 OS

    I am trying to upgrade the BIOS for Compaq F700 computer laptop F.04 to F.08 worm!

    I can do it under Windows 7 OS (the sp39468 WinFlash file is recommended under Vista environment)?

    Thank you

    Make sure that your antivirus program is disabled. It should be in safe mode, but check to be sure.

    If the antivirus program is active for a windows-based BIOS flash, the antivirus program may try to interrupt the flash 'think' a virus attacks the BIOS. A BIOS flash interrupted computer = death.

  • How can I get rid of a Trojan on my presario cq57 laptop?... said Microsoft Security databases may not get rid of it?...

    How can I get rid of a Trojan on my presario cq57 laptop?... said Microsoft Security databases may not get rid of it?...

    Hi Glenn,.
    Follow steps 1 and 2 (under the deletion process) in this malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
    If you have any questions about the instructions, just ask. Let me know if this helps you.
    Brian
  • I bought a presario cq43-412tu. all the operating system supports this laptop. ?

    I bought a presario cq43-412tu. all the operating system supports this laptop. ?

    Hello

    Do you not need to run all the operating systems on the machine? With the help of VMware or similar is the way to go, but with this card, you don't have much choice, you must upgrade first to 8 GB of RAM. It comes with FreeDOS, you need at least a host operating system in order to run the virtual machine.  At this point, Windows 7 Pro or Ultimate is the starting point.

    Good luck.

  • Laptop Compaq C58: my computer compaq laptop cq58 has the system off 62821215 code

    my computer hp cq58 laptop has the code system off 62821215

    Help, please

    @jnorris285

    Enter 73789831

    Kind regards

    DP - K

  • laptop guard turn off through a play

    My laptop keeps switching off and is really hot really frustrating.

    [Moved from comments]

    Hello

    The games can be hardware intensive (graphics, etc.) and your problem seems to come from a combination of special games and a build-up of dust in your laptop.

    It may be an overheating problem and it is normally the main reason for your problem.

    .

    If it's a hardware problem, it would not not to restart.

    That said, it is possible to have a hairline cracks in the motherboard, etc, which becomes obvious as soon as it warms up

    Check vents for hair, dust, etc. and do not use a laptop when it is based on material surfaces: bedspreads, blankets, etc.

    If the problem persists, because it of a laptop, bring it to a local computer and reliable repair shop and get them to open and clean the dust inside...

    Here is an interesting discussion about the reasons for your problem:

    http://PC-trickandsolution.blogspot.com.au/2011/07/fix-laptop-overheating-shutdown-problem.html

    NB: > however 9 out of 10 cases of overheating are caused by obstruction of the air flow.

    _______________________________________________________

    Safe operating temperatures of criticism:

    "What should be the temperature of my processor in the computer?

    http://www.computerhope.com/issues/ch000687.htm

    See you soon.

  • "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

    I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

    Malwarebytes Anti-Malware (Trial) 1.75.0.1300
    www.Malwarebytes.org

    Database version: v2013.04.10.14

    Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
    Internet Explorer 8.0.6001.18702
    Ziadie Berry: BERRY-LAPTOP [Director]

    Protection: disabled

    10/04/2013-17:44:54
    MBAM-log-2013-04-10 (17-44-54) .txt

    Scan type: quick scan
    Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
    Analyze the options disabled: P2P
    Objects scanned: 271656
    Time elapsed: 43 minute (s), 42 second (s)

    The process of memory detected: 0
    (No malicious items detected)

    Modules of memory detected: 0
    (No malicious items detected)

    The registry keys detected: 0
    (No malicious items detected)

    The registry values detected: 0
    (No malicious items detected)

    Registry data items detected: 0
    (No malicious items detected)

    Files detected: 0
    (No malicious items detected)

    Files detected: 1
    C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

    (end)

    Malwarebytes Anti-Malware (Trial) 1.75.0.1300
    www.Malwarebytes.org

    Database version: v2013.04.10.14

    Windows XP Service Pack 3 x 86 NTFS
    Internet Explorer 8.0.6001.18702
    Ziadie Berry: BERRY-LAPTOP [Director]

    Protection: enabled

    10/04/2013 23:43:49
    MBAM-log-2013-04-10 (23-43-49) .txt

    Scan type: quick scan
    Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
    Analyze the options disabled: P2P
    Objects scanned: 269636
    Elapsed time: 49 minute (s), 41 second (s)

    The process of memory detected: 0
    (No malicious items detected)

    Modules of memory detected: 0
    (No malicious items detected)

    The registry keys detected: 0
    (No malicious items detected)

    The registry values detected: 0
    (No malicious items detected)

    Registry data items detected: 0
    (No malicious items detected)

    Files detected: 0
    (No malicious items detected)

    Files detected: 1
    C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

    (end)

    I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

    Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
    WinSock status

    attmpting error information to validate the Winsock base providers: 2
    error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
    user redirection of information in support of the appeal

    Diagnosis of network adapter
    Network location detection

    Info to help home Internet connection
    Identification of network adapter

    Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
    Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
    Info both Ethernet connections and wireless available, ask the user for selection
    required user input action: select network connection
    Info Wireless connection selected
    State of the network adapter

    Info network connection status: connected

    HTTP, HTTPS, FTP Diagnostic
    HTTP, HTTPS, FTP connectivity

    WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
    warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
    warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
    WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
    WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
    WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
    error could not make an HTTP connection.
    error could not make an HTTPS connection.
    error could not make an FTP connection.
     
    Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

    I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

    Hello

    Follow these methods.

    Method 1.

    Start the computer in safe mode with network and run a full scan of computer viruses.

    To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 2.

    If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

    Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

    What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 3.

    You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

    How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • My Lenovo laptop not turn off or do anything I told him to do.

    My Lenovo laptop not turn off or do anything when I hit restart, stop, sleep, switch user, log off, lock or Hibernate. I can not even use the keys CTRL + ATL + DELETE the order and I have no idea what to do. and I already uninstalled Norton due to previous questions posted here.

    Hi DylanCole72,

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         Which model of the laptop?

    Follow the steps in the article.

    You cannot log off, restart or shut down your Windows XP-based computer

    Advanced Troubleshooting for shutdown problems in Windows XP

  • laptop keeps cutting off after 1 hour. new battery installed

    laptop keeps cutting off after 1 hour.  new battery installed why this phenomenon occur?

    Have you checked your Power Options settings?

    The following article is maybe worth a visit:

    Adjust Windows XP Power Options
    http://www.lancelhoff.com/adjust-Windows-XP-power-options/

    A Google search for power management / Power Options
    will provide more information.

  • Wireless router WRT160N cable on the desk, I loose internet when the laptop is turned off.

    I have wrt160n v2 router wireless, it does not work for me.

    If my wireless XP laptop is only powered ON the Vista desktop internet wired connection works, I'm not wired or wireless using laptop computer, not on the internet, only power.

    If the laptop is turned off, I have no internet on the desktop, always connected via the router.

    The laptop is used and I didn't know if the without built-in thread was pretty new, so I bought a card to go in wireless.

    When everything is on everything is to play on the internet times two computers, but if you turn off the laptop I have to connect internet directly on the Office to continue in the internet.

    I started working with a tech support yesterday and they are difficult to understand. I had put in the new firmware and the problems persist.

    Can someone help me, I don't really have time to be on the phone for hours figure this all out.

    Thank you

    Jackie

    go to http://audipages.com/router/ and follow the instructions

  • can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

    can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

    You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
    Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK button

    Multiple monitors: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

    Set up multiple monitors
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

    Move windows between multiple monitors
    http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

    Understanding multiple monitors
    http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

Maybe you are looking for

  • How to open automatically each time as bookmarks to firefox startup

    How can I get the Bookmarks window to open automatically each time you start firefox

  • How update Firefox 8 because he was apparently a problem when he tried to do

    History of the update has the following statement:Installed on: November 9, 2011 21:20:18Status: Server not found update (check your internet connection) He may have had a problem at this time, but no more. So what I do now? Can I find the patch some

  • HP DeskJet 3630: I can't get my printer to connect to wifi

    I set up my printer and I tried on my phone to connect to the wifi and it wouldn't work so I unplugged and moved closer to the wifi. Now wifi has the word "setup" that he disappeared and only WiFi it is requiring a password I don't know

  • Printing with notepad

    When I tried to print a file PRN in Notepad, the error reads as 'Page too small to print one line. Try printing using smaller font".  I use a series of Zebra gt820 and it works with the other processors with the same configuration. Tried to reduce th

  • Terrible resolution with DW on laptop screen

    Hello.I recently bought a Lenovo laptop - Ideapad 500 - 15 ISK to help to win 10.It has great screen resolution: 1920 x 1080But the Dreamweaver interface (CC 2015.1) seems blurred and very bad. a similar search through dirty glasses...However, using