Compaq presario cq57: unable to find the solution to do this, please help me!

Similar Questions

• I have this window 10 installed about 5 days ago & now I can't find the Accessories folder, can anyone please help on this...?

  I have this window 10 installed about 5 days ago & now I can't find the Accessories folder, can anyone please help on this...?

  Can you be more specific?

  If you mean windows Accessories > win key > all apps (see shears) > windows accessories

  

• Installed Windows 7 on my HP Compaq nw8440 but unable to find the drivers that only Vista drivers are ther

  I just install Window 7 Home Basic Edition as final Version was my HP Compaq nw8440 too slow. After installation, I am unable to find the drivers and all drivers available for Windows Vista. No driver VGA, No Finger Print etc. And the Internet is also working slowly well my connection giving the same speed. Please help me

  You are the very welcome.

  I do not take up that simple...

  Try the driver windows 7 for her at the link below and you will need the W7 software protect tools because I do not think the Vista software works.  Ditto for the quick launch buttons.

  These drivers have been extracted from the 6910p who was the first series HP business notebook, support for windows 7 and the one that follows in the line after the nc6400 (the 14.1 "model of your screen).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-66699-1&prodTypeId=321957&prodSeriesId=1839152

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&taskId=135&swItem=ob-78740-1&mode=3

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-77198-1

  Paul

• Compaq Presario CQ57-445EQ: recovery of the BIOS Compaq Presario CQ57 445EQ

  So I got this Compaq Presario CQ57-445EQ with Windows 7 and 4 GB of ram. Last night I tried to upgrade the BIOS of the first version (2008) to the last (2015) and he got bricks. During the upgrade, it got stuck for 30 minutes and I had to reboot. Now it is black screen, caps lock shift will blink twice every 2 seconds. I tried to recover from USB with sp55356 and sp64612 but no luck.

  I should mention that Win + B, Fn + B, Fn + Esc combinations is not the tone of the laptop, but it shows a USB activity.

  What can I do? Bios versions are .fd files.

  Thanks in advance!

  Not that I know of.

  You may need to purchase recovery media usb to your laptop to HP or HP partner.

  http://h10025.www1.HP.com/ewfrf/wc/CLC?tmp_showAll=false&'destPage = document & cc = us & dlc = en & docname = bph07143 & lc = en & tmp_clcDestination = doclink

• Compaq Presario CQ61, unable to boot the laptop

  Compaq Presario CQ61 running Windows 7 Home Premium (build 7601) bought about 4 years ago.

  Computer failed to restart after a period of sleep.  I suspect that it doesn't have an automatic restart after automatic installation of an update - it's only a guess because I have no access to the computer at the moment, but I had a similar problem recently - on this occasion, I got a 'Safe Mode' start - by pressing F8 repeatedly gave me access to the appropriate screen.  I've implemented subsequently by restoring the system to a point just before a automatic installation of a critical Windows Update, and that seemed to do the trick.

  On this occasion the F8 route has no effect on the problem; the 'caps lock' and 'NumLock' continually of the blink just of LED (i.e. not a limited number of times), the fan starts, but there is no other sign of life.  I tried a hard restart, but without result.  I also removed and replaced memory, but once again no effect.

  Can you please advise.

  I'm so sorry I couldn't help you solve the problem, but maybe you could try to free the keyboard, nothing will happen if you do not lose the cpu and tight again. I know that the keyboard one is hard, persevering, best wishes.

• Error on starting of my Compaq Presario CQ57-339WM error on the box that says

  I get an error when I boot. Said HPQWUTILS. EXE = No disk there is no disc in the drive. Please insert a disk into the drive. then there \device\hard disc 1\ DR1, the bottom row says Cancel try again continue everything in boxes. If I hit Try again 5 times the system appears and works.

  Hi Lejunc,

  1. what operating system is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  This error occurs due to Proxy HPQuickWeb.

  Click on the link below and see if it helps.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/hpqwutils-exe-no-disc/m-p/1134331#M84333

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps.

  Please let us know if you face any issues.

• Compaq presario CQ57 - always overheated during the game

  My laptop is exactly 3 years. It is still too hot for some games and now she doing that I keep having to deal with. I have a fan from under (extra fan) and it helps a lot. What can I do in addition to the dust of use under the laptop to try to clean it up? Or is my laptop any crash just because he's old? I use windows 7, that's what came with it. I need to know if I can do anythiong home to solve this problem, or do I need to take repair? Or is it just too late? When this happens to my pc is a strange gurgling noise and turns black. So I have to wait and hope, he returned to return to windows, but as of late is no longer the fact, so I end up having close myself which is dangerous (or so I thought it was)?

  Hello

  3 years without you fans of cleaning is too

  http://support.HP.com/us-en/document/c01657439

  check out this video to see how to clean

  old OS with lots of unused files and small footprint can also make your hottest PC

  missing drivers can also make your hottest PC

  Finally if all this did not help

  I ask you to ask a professional to change the cream on vents

  You can do it yourself if you can when searching for a video disassembly of HP or a Guide for your model to know how to change

  * It is a difficult operation for someone with no experience in this area so if you feel that you can't, a professional will be much better than losing your laptop

  * do not forget what I said about changing the OS and drivers

  This answer solve your message or question?

  If Yes, then share the good news! Inform others that this response was helpful in accepting this solution.
  You can also show your appreciation by giving congratulations.

• This could be the cause blinking screen flickering on my day or 2 old Compaq Presario CQ57?

  My PC laptop Compaq Presario CQ57 began to blink the next day I bought and has only worsened over time to the point where sometimes it's almost impossible to see even the screen. This could be the cause?

  Hello

  Please, try the following steps and check if Unit works very well.

  (1) the Bios, graphics & Chipset driver update from the HP website and check.

  (2) once the unit is on keep tapping F10 key and checked if the screen flashes If yes you may need to replace the screen by call HP technical support.

• I would like to increase the maximum ram my notebook compaq presario cq57-450ea will be all

  I would like to increase the maximum RAM that will allow my computer laptop Compaq Presario CQ57-450EA, currently only 2,00 GB.
  I would be very grateful if you could provide me the information, including any product code so that I can order the correct item that is compatible with my machine.

  With regard to the stem

  Hello

  Please find the link given below might help you.

  Compaq Presario CQ57 - 400 Notebook PC series - specifications

• the search for drivers for a compaq presario cq57-339wm pci

  I'm looking for drivers for a compaq presario cq57-339wm pci. I have no internet and were in section hp driver and can't find it. someone would be so kind as to send me to the right place.  Thanks in advance Lewis

  You are the very welcome.

  You need this driver for the controller of communication simple pci:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101536-1&CC=US&DLC=en&LC=en&os=4063&Product=5111985&sw_lang=

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• The fan on a Compaq Presario CQ57 Windows laptop settings

  Hello, I have a Compaq Presario CQ57 and the fan runs all the time at full speed. I opened the laptop and did a fan and cleaning of the motherboard, I applied thermal paste, I changed in the bios the option #Fan always on # Enable to disable, I updated the Bios but still nothing... it sounds like a jet of fighter.should I change my fan? someone who has a Council?

  I already ordered the fan and I will keep you posted as soon as I get it and install it.
  Thank you very much

• Compaq presario CQ57: deactivation of the system 85759007

  Compaq presario CQ57 system off (857590070)

  Try > 30631029

• Compaq Presario CQ57: bios error 501

  What should I do to get rid of this problem?  Please help me someone.

  Welcome to the community of HP @ANAKONDA support,

  Thank you for joining on the HP's Support Forums! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support.

  I wanted to join you and help! I understand that you have a problem with an APPLICATION (501) BIOS ERROR on your Compaq Presario CQ57 laptop PC.

  Remove all USB devices. Disconnect all non-essential devices, because they can cause some problems.

  Try starting your laptop normally after having disconnected all. If that does not solve the problem, please continue with troubleshooting.

  The next step would be for you to try to restore the BIOS. You will see that the document says:

  If the BIOS of your laptop becomes corrupted, and a failure to upgrade the BIOS or damage caused by a virus, the computer can display all the following symptoms:

  • The computer displays the error message from the BIOS APPLICATION ERROR 501.

  After restoring the BIOS see if you can start the computer normally.

  Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem that you have. Remember to mark this message as an acceptable Solution if it solves the problem for you.

  To show recognition for my efforts please click the Thumbs Up below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Have a wonderful day!

• Compaq Presario CQ57-104TU: upgrade Ram, memory (Ram Hynix PC3L-12800)

  Hello world

  I have a Compaq Presario CQ57-104TU. I recently decided to upgrade the ram (currently 1 x 2 GB Elpida PC3 - 10600 1333 Mhz). I bought 2 x 4 Gb Hynix HMT451S6AFR8A, PC3L-12800. Unfortunitely when I install the new Ram (Hynix)

  the computer does not start. Is there something I can do or the Ram is not compatible?

  Any help would be appreciated,

  André

  Here is the Service Manual:

  Manual

  See p.2. Specified memory is DDR3-1333 1.5 volt and you try to install low-voltage DDR3-1600. In addition, memory that you are trying to install is high density, because it has 4 blocks on each side, where I am betting that original memory was of low density (8 blocks). Long story short, it is not compatible. It do you no good to install DDR3-1600 by the way. Best of cases, it will anyway be downclock speed 1333.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.