Compaq Presario CQ60-413NR: power on password unknown
My brother gave me his old laptop but the password he gave me does not work for the power on password. I tried to enter several times and now it says disabled system . Help, please.
Yes! You can restart the device and try the password I provided again
Let me know how it goes
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the white button on the right to say thank you Thumbs Up *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Although I am an employee of HP, I speak for myself and not for HP
Please help, try to reset the bios password for compaq presario cq60-419WM forHP
1 flegq or 2nd huxsypk
You may need to do this.
Use this code to go into the BIOS.
Disable all passwords that are enabled.
If demand for CURRENT password using this code.
Request NEW password just press ENTER.
If asked to hit just to CHECK password to enter.
Save and exit.
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
Hi, my niece was playing with my CQ60 and now there is a power on password, the code that appears after 3 fails is 57835687 any help would be greatly appreciated. Im sorry if I asked this question in the wrong place. Thank you
DP - K
I need help wih the power on password for my Compaq Presario CQ56-115DX
~ Thanks in advance
DP - K
I hand a compaq presario cq56 and I breed power over password.after 3 times enter tells a code (60631788).
Is it somone kan help me with this ar desperat.
DP - K
Son compaq presario CQ60 will not feed goes right at the request of password cmos don't care about data on PC I change OS to LINUX. Password entry I tried three times bleached with 13708 code can help you me reset so I can get my sons PC up and running again thanks in advance, you send all help to address and email please
DP - K
I have an old Compaq CQ60and get the power on password. (58134685), anyone know if there is a jumper to clear the password.
My keyboard and trackpad on my Compaq Presario CQ60 laptop do not react and do not have external devices to see if it is an internal matter. Cannot restart in Mode safe as the keyboard is unresponsive, however it allows me to type my password to access vista! I think I just lock the computer, but do not know how unlock, various forums have specified relocation drivers etc, but I am unable to do this without functional keyboard and do not know how if I pressed a key combination that caused it. I don't know if it's a problem of Vista or Compaq/HP.
Immensely from any help appreciated!
as far as I know, if you can type your password on the login screen, then the keyboard works, if the problem appears after the connection or it will appear when you are on your desktop screen, it may be a problem of operating system or a problem with corruption of user account
the keyboard would be a hardware failure, if when you turn on your nb, there will be no ligts on the keyboard will make the capslock key does not illuminate or does not at all as long as you turn on the nb
for the touchpad, try to check if its or disable... If there is a light orange above the touch pad then sound off, toggle the switch the light to turn to blue...
so before anything else... TRY THIS FIRST!
1. remove the battery
2 disconnect the power adapter
3. no power supply at all, press in and hold the button for 1 min... Be sure that it will be 1 min...
technically, we call this HARD RESET... This process would free electricity static that could be included on the power button spout these electrostatic charges sometimes causes harware malfunctionalities...
then it this step does not work... do this...
try to go into safe mode by continuously pressing F8 during startup (press F8 when you see the hp invent screen), then you will be directed to advance startup options... Choose last known good config... Then, it will boot to the last known good setting...
Please let me know if this does not work...
Otherwise, ' choose repair your computer "on the start options... Choose the American keyboard layout... so if asked for a user name and password, you can change the administrator username username and then put your password... If you do not use any password leave it blank... then choose Startup Repair...
Please let me know if this does not work...
I hope this helps...
I recently changed the House, but all with a modem of fastweb. The model of modem is the same as that of the old House, but they changed the modem gives me a new and my Compaq Presario CQ60 is no longer connects to the Internet, but only for the modem. Connection network tells me that the network is not identified and the internet does not work. I tried the modem power cycle and install different drivers, but nothing worked. What can I do?
Your laptop is probably the Atheros AR5007 wireless network adapter.
If so (you can check by going to the Device Manager, expand network adapters device category to see the name and number of the model wireless network card), this driver installation normally solves this problem...
How can I reset a compaq presario cq60-211dx to factory settings to remove password... My son put a password in order to prevent his brother to use his computer... the screen broke and we ended up buying another computer... but now, we have fixed this one, but we tried every password we could think, but no luck... a computer repair technician told me the only way to bypass the password is to reset the computer to factory settings... How can I do this?
Please find the link given could help you resolve your problem.
Compaq Presario CQ60-420US, 579000-001 motherboard, Windows Vista Edition Home Premium 32-bit.
After 6 years of use (excellent), had to install a new fee and hard drive install Windows.
No manuals, disks or instructions available.
Now I have no internet access: what follows is marked with a yellow triangle with an exclamation mark inside.
(1) video cards
(A) standard VGA Graphics: not installed or running
(2) network cards
(A) Realtek RTL8101: not installed or running
(3) other devices
(A) Ethernet controller: not installed or running
(B) acquisition of ICP data: not installed or running
Controller of Bus SM C): not installed or running
(D) unknown device: not installed or running
(E) video controller: not installed or running
Any help is greatly appreciated, thank you.
Of the hardware ID you have validated, you need the driver for the wireless card: PCI\VEN_168C & DEV_001C:
Try the driver directly from realtek for ethernet controller... a first on the list.
I've upgraded to Windows 7 from XP.
I connect the HDMI cable to my TV.
The PC displays both screens, but there is no signals reaching the TV.
I uninstalled the software of the graphics card and let the Win Update to find the driver. Same results.
Here's my setup.
How to make it work? It works very well with a VGA cable. And I tried many televisions.
Name of the operating system Microsoft Windows 7 Enterprise
Version 6.1.7601 Service Pack 1 Build 7601
Another Description of the OS is not available
Manufacturer of operating system Microsoft Corporation
Name of the MARTSHP system
System manufacturer Hewlett-Packard
System model Compaq Presario CQ60 Notebook PC
System Type X 86-based PC
Processor AMD Sempron (TM) TR-42, 2100 Mhz, 1 Lossnay, 1 logical processors
BIOS Version/Date Hewlett-Packard F.54, 18.08.2009
SMBIOS Version 2.4
Windows directory C:\Windows
System directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "6.1.7601.17514".
MartsHP\Administrator user name
Zone schedule Southeast Asia standard time
Physical memory (RAM) 4.00 GB
Total physical memory 2.75 GB
1.60 GB available physical memory
5.50 GB total virtual memory
4.13 GB available virtual memory
Hi realpommy. If you encounter problems with HDMI output and let Windows determine the pilots, who could be part of the issue. First of all try to install these Windows 7 drivers provided by HP for your laptop: NVIDIA nForce Chipset MCP77MV graphics drivers
After installation and reboot, if you still have problems with video output look in Device Manager, to ensure that there is no error, or "unknown devices". The section "Understanding of the symbols of error Device Manager" in this document:
Information from the Device Manager in Windows 7 to illustrate some possible errors.
If there is no error in Device Manager, do through these documents for more information and the last for troubleshooting ideas:
Connection of a monitor, projector or a TV (Windows 7)
Overview of HDMI and DVI for PC connections
Let me know if it helps.
Hi, I tried to clean my laptop fan, because on the CPU temperatures up to 90 degrees Celsius. But after the opening of the laptop, clean the fan and put all the pieces together again once, it does not start. The led near the power cord plug is on, and the other indicating that the battery is also on. But when I press the power button / nothing happens. All cables and screws are in the right place. Model of the laptop Presario CQ60-425SL. Thank you!
Hello and thanks for the display on the HP support forums. Here is the link to your maintenance and service guide. What you can do, is use to open the new system and each point using the guide to make sure that everything goes back together in the right place.
If you still experience problems at this time where the only option would be to contact HP support for service options.
Use the following link to contact the correct service.
Please let me know how things are going. Thanks again for posting and have a great day.
I need to upgrade my Compaq Presario cq60 - processor of the computer laptop 219tu for a quick. Is this possible? If so, what are the processors compatible with this model? And what I need to change the power supply for the new processor?
Please use the 13 under Guides the user to the following link to discover compatible CPU for your machine:
Hello, I'm having a problem with my NEW Compaq Presario CQ60-216DX mother. Every time it boots up vista and I run internet explorer, I get a strange blue screen which exports a file memory and reboots.
I have the feeling that this might have been caused by a virus, but I can't do something, because Vista can't reformat long for some reason any.
I tried a hard test in my motherboard and he said that there is something wrong with my hard drive.
I don't know what is happening, right now I'm in safe mode trying to find viruses that Nod32 does not detect everything.
Can someone tell me how I can get either the Windows XP Discs to work at startup (which, for some reason, they do not), or an alternative to a long format?
Is there a way to fix this without reformatting? There's almost nothing on this laptop anyway so I'm always willing to do. A regular format has done nothing to solve the problem, I did it with Ubuntu and it did a quick format, but I had no problem with Ubuntu. Then I reinstall Vista and I am constantly having problems with a blue screen of death.
Someone knows how to fix this?The Chemich does not exist
If you want to do a reinstall of Vista then press F11 continuously during the boot upward. This will bring you in Recovery Options were you can choose to restore the system in the same State as when it was purchased. But if, as you suggested, is that a problem of hard drive reinstall won't help.
Maybe you are looking for
Dear people on this forum, Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating. about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work,
C - USB VGA card cannot connect to Macbook Pro Multiport
Running windows7. Get the runtime error 339; Mscomctl.ocx missing or invalid when you try to print from softward program
How to recover Windows 7 Home Prem OS, after original hard drive failures. I replaced it with a new HD, but can't boot OS and does it have any disk recovery Touchsmart 600 1050, it was purchased nine walmart 2009 by me, prior to this accident, the cd
When connection cable vga to tv to the computer message comes up not support on the TV screen