Compaq Presario CQ61-105ED: upgrading my processor CQ61-105ED

Similar Questions

• Compaq Presario CQ61-416SA: upgrade the Compaq CQ61 wireless card

  I have a Compaq Presario CQ61-416SA, running 64-bit Windows 7 application. The current wireless card only works on the 2.4 Ghz band and I want to upgrade to a dual band to get the best speed etc. to 5 GHz. I have an Intel Centrino N6230 of replacement card, but the phone will not accept anything other than the default map. At the start, it stops with an error message saying that it will not continue unless the "unauthorized device" is deleted. If I re - install the original wireless card, it starts and works very well, but this is not the point, I would like to update.

  I guess that the default is to lock the part of the BIOS of the laptop to prevent alteration unauthorized with laptop computers under warranty, but mine is well outside the guarantee.

  I know that the card works because I installed it in my laptop previous and I have been in electronics for 30 years and spent about 5 years of this repair of computers laptops, desktops, servers, etc so I'm sure that I am able to connect a card and the driver installation!

  There does anyone know a way around the block? I won't to be able to upgrade the laptop without it.

  Anyone?

  Do not completely blame HP, but it was little 1984 involving your federal Government. HP and Lenovo read a few Federal Communications Comm regs on the recording of radio portable wireless (including the computer wifi cards) to require that alternative cards are blocked. Other laptop makers has not agreed and now the 'white list' is history, but there is no effort to go back and make new BIOS for older models.

  HP wireless card versions have specific identification in the firmware looking for the HP whitelist before clearing the map to use if you use the version of HP. I looked pretty hard for a version of HP of the card and the one I linked is everything I could find. Google around and you can do better.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq presario cq61-408sl: compaq presario cq61 bios bios upgrade f24 o Reinstall f15

  Hi I have a bug for pc power is not just a part of the bios, but when it warms up a bit ', then I need to try to update the bios and now currently ' F.15 version with a more "recently I thought that le.24.Chiedo f so you if you could give me the link to download this day thank you." My product is: compaq presario CQ61-408SL mother of model WN531EA code don't know ' where trova. Fatemi know thanks

  Hi @mario63_2

  Welcome to the HP Forums!

  This is a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you are looking for a bios update for your compaq presario CQ61-408SL. Your current version is F.15.  It is the recommended version for your laptop.

  Update the BIOS.

  Please note that caveat on the above document.

  I'm including these documents, I don't know whether you need it or not.

  An overheating and Auto Shutdown problem troubleshooting

  Reduce the heat inside the PC to avoid overheating

  Good luck!

• Compaq presario cq61: change the boot sequence

  I have 10 Windows upgrade on my compaq Presario cq61 free. I want to do a clean install of Windows 10. I downloaded the tool of Microsoft Media, made a key USB and DVD containing the clean install. I am told that the use of the flash player, I have to change the boot sequence in the bios. I tried everything from ESC, all numbers F and LED to try to enter the bios and all have failed. Told me that all I had to do with the DVD was just put it in and start the computer and the laptop would boot from the DVD and I could make my own installation from there. Which also failed. The only thing I have not tried is downgrade to Windows 7, affecting Windows 7 back to factory settings, then reinstall the free update of Windows 10. I would not have to go through all if I mostly because I bought the laptop from a friend and it was installed at the factory of Windows 7 and I don't got no disc software to the computer so I don't want to screw up and drop windows 7 without the appropriate software reinstall to match the product key.

  Any help to enter in the bios or advice that could help me reach my goal would be greatly appreciated.

  Hello

  Here are some other suggestions.

  1. start the machine in Windows 10.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close any open windows and stop the laptop by right clicking on the icon from the Start Menu, then select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Tap on the ESC key as soon as you turn it on and see if it will now access the Start Menu.

  2 try to connect a keyboard external usb and see if this will allow you to access the Start Menu.

  Kind regards

  DP - K

• Compaq Presario CQ61-313US: replacement of the CPU Compaq Presario CQ61-313US

  I have a laptop Compaq Presario CQ61-313US VM367UA #ABA that I am refurbishing and it must have replaced CPU. It comes stock with a CPU AMD Anthlon II M300 and I wonder if I can replace it with a CPU AMD Anthlon II M340 since they are the two socket S1, 35W TDP and they were released at the same time, so I think that the firmware should support two processors. I build that several desktop computers and laptops repaired but I traded not portable CPU oout before any info would be appreciated.

  I would say that you were right, because I have worked with several CQ61 CQ61 - 415st comes with this CPU.

• Compaq Presario CQ61 - 417SA Notebook PC Freeze issues

  Hello everyone

  I have a Compaq Presario CQ61 - 417SA Notebook PC running on Windows 7 Home Premium. The laptop freezes at random times, sometimes minutes after use or an hour after use. It does not result by clicking on a program or a file. I have printing freeze the problem may be caused by the failure of the hardware, possibly the HARD drive.

  Here are a few observations from the laptop and the things that I tried to diagnose or repair.

  • During a typical blocking the HDD LED light is always on
  • Also had the blue screen and freeze black screen
  • No error message
  • Hard disk becomes very hot
  • Entered the BIOS and run automatic test of the primary hard drive and memory Test using InsydeH20 Setup utility but it went together.
  • Laptop computer has been completely reset to factory settings so it is impossible due to the high utilization of the processor
  • Idle while the CPU usage is generally of the order of 13%-25%, with a peak of rare of 53%
  • The hard drive is a Western digital Scorpio Black 320 GB 2.5 "SATA

  The laptop is not used so wiping back to settings to original wasn't a problem, but I would like to return to a usable level.

  Thanks for any help you could offer

  Mike

  I was certain insistence autour in my computer and I'm done to restore back to factory settings. So far, it has not frozen and seems to work properly.

  I tried updating the BIOS with HP Support Assistant, but it does not work. Hoping to solve the problem I went online and updated my support Assistant. After this success, I then managed to download the BIOS from internet F.15 version I was also looking for. Everything seems to work quite fine at the moment, although there are a few updates to Windows that will not be installed. The progress bar shows the animation download but the installation hangs at 1 / 8. Some items are classified as "recommended" or "important" so any help with this problem would be immensely appreciated!

  Mike

• Compaq presario cq61: ssd in presario cq61 - 430ev

  I have a HP Compaq Presario CQ61.

  I just bought a Kingston HyperX Savage 240 GB ssd for my laptop, I had already upgraded to windows 10. The placement of the drive was a success, but during the 'clean' windows 10 installation asking the the disk drivers. I contacted the support service of Kingston, and they said this:

  "Please note that we do not really any specific drivers, the SSD would benefit from the planned system of system.
  Some systems may require a storage of pre-installation F6 driver, who usually provided by the manufacturer of the system in your case it would be HP.
  We recommend to check the following:
  -If it doesn't matter what Windows 10 associates BIOS update available for your system (make sure than his most recent available for your system)
  -Pre-installation F6 for your system storage driver (check the site of HP for these drivers).

  Then I updated my system to the latest version of the BIOS, but nothing has changed.

  I looked on the HP site, but I can't find any "storage of pre-installation F6 driver" or any other driver for ssd, so I can't install windows and use my laptop. What I would do about this problem? Help, please!

  Thank you very much!

  Hi @stepolis,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your notebook Compaq Presario CQ61 and problems with a new install of Windows 10. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  Please let me know how it goes.

  Thank you.

• COMPAQ PRESARIO CQ61: Error ENTER PAST ADMINISTRATOR OR POWER ON PASSWORD password

  Recovery Bios Password COMPAQ PRESARIO CQ61 operating system: Microsoft Windows 10 (64 bit) Hello, I have a COMPAQ PRESARIO CQ61 and suddenly asks me the password of the bios. The message that appears is "ENTER password or POWER ON PASSWORD". What can I do? After failing 3 times I get the message "System disabled" and the code 59329588

  Please try-

  46081508

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the button white Thumbs Up on the right of say thank you*.

  Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• Compaq presario cq61: PROBLEM STARTING WITH PRESARIO CQ61... CAPS AND NUM LOCK FLASHES every 4 seconds!

  Hello! I have a problem with the starter. When I try to boot my laptop, my screen is black and Maj CapsLock and numlock just Flash every 4 seconds. Then I go to your page to download the BIOS. Well, when I dl and install Recovery BIOS for Compaq Presario CQ61-420EM get some InsydeFlash application, what is it for? I saw in the video that you get HP system BIOS update utility tool and that is the problem for me, I don't understand this application, instead, I get this "InsydeFlash" I don't know what is! HELP PLEASE!

  Hi @patrik13,

  Thank you for the update and confirmation.

  You would be kind enough to mark the post that solved your problem as accepted solution to help others who may have the same experience as you.

  Thanks in advance.

  Good luck with the repairs.

• Compaq Presario CQ61-430SV: model of motherboard

  I have a Compaq Presario CQ61-430SV I would like to know the reference number of the motherboard has this laptop. Can someone help me?

  Map of discrete PM45 system for use with separate computer models, select (including integrated modem Digital Media Slot and replacement thermal material) 517838-001

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq Presario CQ61, unable to boot the laptop

  Compaq Presario CQ61 running Windows 7 Home Premium (build 7601) bought about 4 years ago.

  Computer failed to restart after a period of sleep.  I suspect that it doesn't have an automatic restart after automatic installation of an update - it's only a guess because I have no access to the computer at the moment, but I had a similar problem recently - on this occasion, I got a 'Safe Mode' start - by pressing F8 repeatedly gave me access to the appropriate screen.  I've implemented subsequently by restoring the system to a point just before a automatic installation of a critical Windows Update, and that seemed to do the trick.

  On this occasion the F8 route has no effect on the problem; the 'caps lock' and 'NumLock' continually of the blink just of LED (i.e. not a limited number of times), the fan starts, but there is no other sign of life.  I tried a hard restart, but without result.  I also removed and replaced memory, but once again no effect.

  Can you please advise.

  I'm so sorry I couldn't help you solve the problem, but maybe you could try to free the keyboard, nothing will happen if you do not lose the cpu and tight again. I know that the keyboard one is hard, persevering, best wishes.

• Compaq Presario CQ61 - 421SA Notebook battery 484170-001 necessary

  I have a laptop Compaq Presario CQ61-421SA with a number of battery: 484170-001.  It gives a warning 601 at startup.  Even when I have the trendy area it will suddenly drain and stop immediately without warning making me lose whatever it is that I'm working on that day.  I am struggling to find a seller for a spare battery and what voltage can someone help me please

  Hello

  For example, the battery on the following link would be appropriate.

  http://www.Amazon.co.UK/replacement-CQ61-421SA-CQ61-421SG-CQ61-422SA-CQ61-422SG/DP/B009O5GVUU/ref=pd_cp_computers_0/280-1730758-8360619

  Kind regards

  DP - K

• Compaq Presario CQ61: HP system off

  Hello! I have a Compaq Presario CQ61, did not open for awhile. When I started it, I get a black screen and a blue square saying "Enter password or power on password administrator". After failing 3 times, another blue square has popped up with the message 'system off [67151386] '. What can I do to start the laptop?

  Thank you in advance!

  @Tetraxx

  Enter 78839908

  REO

• Compaq Presario CQ61 problem

  Good day to all,

  I have a problem with my compaq presario cq61. My unit does not start with the battery or even the power supply is connected.

  > I don't know that my diet is in good condition. The LED is on and it's output voltage.

  > I noticed something that when I plugged the power in running the LED of the controller turns on but input domain after sometimes (about 5seconds) LED off suddenly.

  What is the problem with my Compaq Presario CQ61? Please help me with this.

  Thank you very much.

  Hello jervenbatilo,

  I see you have power relative to problems with your HP computer. You did most of the troubleshooting that is appropriate for your question.

  I'm including this link which has most of the troubleshooting steps that may solve your problem.

  If you are unable to get any power on the computer, it is most likely a problem with the motherboard of the computer.

• Compaq presario cq61: compaq presario cq61

  Hello..

  Please can you help me?

  I have a compaq presario cq61 and I tried the code 3 times and a nother cod came

  65976686

  I saw that you will help many people, giving them a code

  thanx

  You are the very welcome.

  I'm not a PC repair in commerce or training technology, but that you normally get the message means that the hard drive has failed and needs to be replaced.

  Also, you need to reinstall the operating system on the hard drive of replacement (if you choose to replace it).

• Compaq Presario CQ61: admin password Bios

  I used a password on my BIOS 4years ago. Today, I need to make changes and not remember. After trying 3times, he asked the password for administrators with an another 3failed of the trial, it showed an error meddage thus: 'Turn off system' [57211287]

  Can I still use both of my windows on different partitions, but I need to make changes in order to run a virtual machine to my linux server.

  Please I need urgent help

  Its a Compaq Presario CQ61

  Thank you

  @belacom

  Enter 48179809

  REO