Compaq Presario CQ61: HP system off

Hello! I have a Compaq Presario CQ61, did not open for awhile. When I started it, I get a black screen and a blue square saying "Enter password or power on password administrator". After failing 3 times, another blue square has popped up with the message 'system off [67151386] '. What can I do to start the laptop?

Thank you in advance!

Advertisement

@Tetraxx

Enter 78839908

REO

Tags: Notebooks

Similar Questions

  • Compaq presario CQ61: disable System

    Hello

    I got a message when I turn on the laptop, enter the password administrator or power on password? After 3 attempts it said system disable the key: 12503741

    (I tried to turn off the laptop and take out the battery and unplug the unit for an hour to see if it might reset it, I read thatit would be on another forum, but it did nothing)

    It is a compaq presario CQ61

    Thanks in advance

    @natalie110266

    Enter 03461387

    REO

    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  • COMPAQ PRESARIO CQ61: Error ENTER PAST ADMINISTRATOR OR POWER ON PASSWORD password

    Recovery Bios Password COMPAQ PRESARIO CQ61 operating system: Microsoft Windows 10 (64 bit) Hello, I have a COMPAQ PRESARIO CQ61 and suddenly asks me the password of the bios. The message that appears is "ENTER password or POWER ON PASSWORD". What can I do? After failing 3 times I get the message "System disabled" and the code 59329588

    Please try-

    46081508

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the button white Thumbs Up on the right of say thank you*.

    Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

    Thank you

    GBL84

    I'm not an employee of HP

  • COMPAQ PRESARIO CQ61: Recovery of Bios Password COMPAQ PRESARIO CQ61

    Recovery Bios Password COMPAQ PRESARIO CQ61 operating system: Microsoft Windows 7 (32 bit) Hello, I have a COMPAQ PRESARIO CQ61 and suddenly asks me the password of the bios. The message that appears is "ENTER password or POWER ON PASSWORD". What can I do? After failing 3 times I get the message "System disabled" and the code 50949691

    Hello

    Please read the first post on the link below...

    http://h30434.www3.HP.com/T5/notebook-operating-Sy...

  • Presario cq61: Compaq Presario CQ56-219WM system disabled

    Yes I booted up my Compaq presario cq61 and it askedvme a key administrator password it gives me is that 68487177 I do all my work on this computer could someone please help

    @joelucas311978

    Enter 77585179

    Kind regards

    DP - K

  • Compaq Presario CQ61: admin password Bios

    I used a password on my BIOS 4years ago. Today, I need to make changes and not remember. After trying 3times, he asked the password for administrators with an another 3failed of the trial, it showed an error meddage thus: 'Turn off system' [57211287]

    Can I still use both of my windows on different partitions, but I need to make changes in order to run a virtual machine to my linux server.

    Please I need urgent help

    Its a Compaq Presario CQ61

    Thank you

    @belacom

    Enter 48179809

    REO

  • Compaq presario cq61: PROBLEM STARTING WITH PRESARIO CQ61... CAPS AND NUM LOCK FLASHES every 4 seconds!

    Hello! I have a problem with the starter. When I try to boot my laptop, my screen is black and Maj CapsLock and numlock just Flash every 4 seconds. Then I go to your page to download the BIOS. Well, when I dl and install Recovery BIOS for Compaq Presario CQ61-420EM get some InsydeFlash application, what is it for? I saw in the video that you get HP system BIOS update utility tool and that is the problem for me, I don't understand this application, instead, I get this "InsydeFlash" I don't know what is! HELP PLEASE!

    Hi @patrik13,

    Thank you for the update and confirmation.

    You would be kind enough to mark the post that solved your problem as accepted solution to help others who may have the same experience as you.

    Thanks in advance.

    Good luck with the repairs.

  • Compaq Presario CQ61-430SV: model of motherboard

    I have a Compaq Presario CQ61-430SV I would like to know the reference number of the motherboard has this laptop. Can someone help me?

    Map of discrete PM45 system for use with separate computer models, select (including integrated modem Digital Media Slot and replacement thermal material) 517838-001

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Compaq Presario CQ61, unable to boot the laptop

    Compaq Presario CQ61 running Windows 7 Home Premium (build 7601) bought about 4 years ago.

    Computer failed to restart after a period of sleep.  I suspect that it doesn't have an automatic restart after automatic installation of an update - it's only a guess because I have no access to the computer at the moment, but I had a similar problem recently - on this occasion, I got a 'Safe Mode' start - by pressing F8 repeatedly gave me access to the appropriate screen.  I've implemented subsequently by restoring the system to a point just before a automatic installation of a critical Windows Update, and that seemed to do the trick.

    On this occasion the F8 route has no effect on the problem; the 'caps lock' and 'NumLock' continually of the blink just of LED (i.e. not a limited number of times), the fan starts, but there is no other sign of life.  I tried a hard restart, but without result.  I also removed and replaced memory, but once again no effect.

    Can you please advise.

    I'm so sorry I couldn't help you solve the problem, but maybe you could try to free the keyboard, nothing will happen if you do not lose the cpu and tight again. I know that the keyboard one is hard, persevering, best wishes.

  • Compaq presario cq61: change the boot sequence

    I have 10 Windows upgrade on my compaq Presario cq61 free. I want to do a clean install of Windows 10. I downloaded the tool of Microsoft Media, made a key USB and DVD containing the clean install. I am told that the use of the flash player, I have to change the boot sequence in the bios. I tried everything from ESC, all numbers F and LED to try to enter the bios and all have failed. Told me that all I had to do with the DVD was just put it in and start the computer and the laptop would boot from the DVD and I could make my own installation from there. Which also failed. The only thing I have not tried is downgrade to Windows 7, affecting Windows 7 back to factory settings, then reinstall the free update of Windows 10. I would not have to go through all if I mostly because I bought the laptop from a friend and it was installed at the factory of Windows 7 and I don't got no disc software to the computer so I don't want to screw up and drop windows 7 without the appropriate software reinstall to match the product key.

    Any help to enter in the bios or advice that could help me reach my goal would be greatly appreciated.

    Hello

    Here are some other suggestions.

    1. start the machine in Windows 10.

    Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

    In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close any open windows and stop the laptop by right clicking on the icon from the Start Menu, then select prompt (Admin) and click 'Yes' to the uac prompt.

    Type (or copy and paste) the following command (including spaces) and click Enter.

    Shutdown /s /t 0

    Tap on the ESC key as soon as you turn it on and see if it will now access the Start Menu.

    2 try to connect a keyboard external usb and see if this will allow you to access the Start Menu.

    Kind regards

    DP - K

  • Compaq Presario CQ61 problem

    Good day to all,

    I have a problem with my compaq presario cq61. My unit does not start with the battery or even the power supply is connected.

    > I don't know that my diet is in good condition. The LED is on and it's output voltage.

    > I noticed something that when I plugged the power in running the LED of the controller turns on but input domain after sometimes (about 5seconds) LED off suddenly.

    What is the problem with my Compaq Presario CQ61? Please help me with this.

    Thank you very much.

    Hello jervenbatilo,

    I see you have power relative to problems with your HP computer. You did most of the troubleshooting that is appropriate for your question.

    I'm including this link which has most of the troubleshooting steps that may solve your problem.

    If you are unable to get any power on the computer, it is most likely a problem with the motherboard of the computer.

  • Compaq presario cq61: compaq presario cq61

    Hello..

    Please can you help me?

    I have a compaq presario cq61 and I tried the code 3 times and a nother cod came

    65976686

    I saw that you will help many people, giving them a code

    thanx

    You are the very welcome.

    I'm not a PC repair in commerce or training technology, but that you normally get the message means that the hard drive has failed and needs to be replaced.

    Also, you need to reinstall the operating system on the hard drive of replacement (if you choose to replace it).

  • Recovery, password Bios COMPAQ PRESARIO CQ61

    Hello

    I have a COMPAQ PRESARIO CQ61 and suddenly asks me the password of the bios.

    The message that appears is "ENTER password or POWER ON PASSWORD".

    What can I do? After failing 3 times I get the message "System disabled" and the code 73585421.

    See you soon

    Hello

    Come in:

    62483407

  • Compaq Presario CQ61 wireless problem

    I use a PC Compaq Presario CQ61-411WM with Windows 7 Home Premium 64-bit, and I am not able to connect to the internet, because the PC does not detect the available wireless networks. The HP wireless assistant reported that the wireless device is disabled in the Device Manager. However, when I check the device under network adapters Manager, Realtek PCIe FE Family Controller does not display an error or a problem. I'm really very happy for any help with this. Thank you.

    Hello:

    Well, the only thing I can think of to confirm that your wireless card did or didn't die is to go into your BIOS by pressing F10 at HP welcome screen and see if there is a configuration menu of devices and make sure that your wireless adapter is displayed.

    If it does not appear, make sure that the setting is set to enabled.

    If it is not, then I guess that the card is completely broken.

    If it is listed and enabled in the BIOS, then you have a major software problem and my solution would be to save all the files you want to keep and perform a system recovery.

    Paul

  • Compaq presario cq61: ssd in presario cq61 - 430ev

    I have a HP Compaq Presario CQ61.

    I just bought a Kingston HyperX Savage 240 GB ssd for my laptop, I had already upgraded to windows 10. The placement of the drive was a success, but during the 'clean' windows 10 installation asking the the disk drivers. I contacted the support service of Kingston, and they said this:

    "Please note that we do not really any specific drivers, the SSD would benefit from the planned system of system.
    Some systems may require a storage of pre-installation F6 driver, who usually provided by the manufacturer of the system in your case it would be HP.
    We recommend to check the following:
    -If it doesn't matter what Windows 10 associates BIOS update available for your system (make sure than his most recent available for your system)
    -Pre-installation F6 for your system storage driver (check the site of HP for these drivers).

    Then I updated my system to the latest version of the BIOS, but nothing has changed.

    I looked on the HP site, but I can't find any "storage of pre-installation F6 driver" or any other driver for ssd, so I can't install windows and use my laptop. What I would do about this problem? Help, please!

    Thank you very much!

    Hi @stepolis,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your notebook Compaq Presario CQ61 and problems with a new install of Windows 10. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

    Please let me know how it goes.

    Thank you.

Maybe you are looking for


HashFlare